The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack Mounting support rails, Smart UPS signaling RS-232 cable, USB cable
Price: $2,175.00 NOW: $2,011.49 Save: $163.51
APC SMX2200HV Features:
Disconnected battery notification - Warns when a battery is not available to provide backup power.
Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.
Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Power conditioning - Protects connected loads from surges, spikes, lightning, and other power disturbances.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
Disconnected battery notification - Warns when a battery is not available to provide backup power.
Network manageable - Provides remote power management of the UPS over the network.
USB connectivity - Provides management of the UPS via a USB port (not available on all models).
Serial connectivity - Provides management of the UPS via a serial port.
LED status indicators - Quickly understand unit and power status with visual indicators.
Audible alarms - Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Mechanical
Height
7 in. (178 mm.)
Width
17.0 in. (432 mm.)
Depth
19 in. (483 mm.)
Weight
85 lbs. (38.64 kg)
Rack Height
4U
Color
Black
Environmental
Operating Environment
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95%
Operating Elevation
0-10000 feet (0-3000 meters)
Storage Temperature
5 - 113 °F (-15 - 45 °C)
Storage Relative Humidity
0 - 95%
Storage Elevation
0-50000 feet (0-15000 meters)
Audible noise at 1 meter from surface of unit
55.00 dBA
Online Thermal Dissipation
150.00 BTU/hr
Output
Output Power Capacity
1.98 KWatts / 2.2 kVA
Max Configurable Power
1.98 KWatts / 2.2 kVA
Nominal Output Voltage
230V
Output Voltage Distortion
Less than 5% at full load
Waveform Type
Sine wave
Output Connections
(8) IEC 320 C13 (2) IEC 320 C19
Input
Nominal Input Voltage
208V, 230V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC 320 C20
Cord Length
6 feet (1.83 meters)
Input voltage range for main operations
140 - 280 V
Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
3 hour(s)
Replacement Battery
APCRBC143
RBC Quantity
1
Communications & Management
Interface Port(s)
SmartSlot, USB
Available SmartSlot™ Interface Quantity
1
Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Yes
Surge Protection and Filtering
Surge energy rating
645 Joules
Filtering
Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449
Conformance
Regulatory Approvals
C-tick, CE, CSA, EN 50091-1, EN 50091-2, FCC Part 15 Class A, GOST, IEC 60950, IRAM, UL 1778, VDE
Standard Warranty
3 years repair or replace (excluding battery) and 2 year for battery
)
