Powerware PW5125-2400-RM Rackmount UPS

Eaton 5P 1950VA Line-Interactive RM / Tower UPS
$1,451.67		Eaton 5P 1950VA Line-Interactive RM / Tower UPS
  • Voltage: 120V
  • Power Rating: 1950VA/1920W
  • Input: NEMA 5-12P
  • Output: (8) 5-15R
  • Form Factor: 2U Rackmount or Tower

Eaton 5PX 1950 VA Line-Interactive Rack / Tower UPS
$1,811.69		Eaton 5PX 1950 VA Line-Interactive Rack / Tower UPS
  • Voltage: 120V
  • Power Rating: 1950VA/1920W
  • Input: NEMA 5-20P
  • Output: (8) 5-20R
  • Form Factor: 2U Rackmount or Tower

Please note, the Eaton Powerware PW5125-2400-RM (5125 UPS family) UPS has been discontinued and replaced by the Eaton 5P and 5PX series. The recommended replacement is the Eaton 5P 2200RT or Eaton 5PX 2200RT. For other upgrade options please contact us.

The Powerware PW5125-2400-RM rackmount line-interactive UPS delivers cost-effective power protection for PCs, workstations, and servers.

  • ABM technology significantly increases battery service life
  • Buck and Double Boost voltage regulation corrects voltage fluctuations and delivers pure sine wave output
  • Extended runtime capability with Extended Battery Modules (EBMs)
  • Load segments maximize runtime for critical devices
  • Hot-swappable batteries simplify service
  • Space saving 2U rack height
Eaton Powerware PW5125-2400-RM Rackmount UPS

Eaton Powerware

PW 5125 2400 RM Specifications:

Mechanical  
Dimensions (HxWxD) 3.5 x 19.0 x 24.5 in. (89 x 482.6 x 622.3 mm.)
Weight 89 lbs. (40.40 kg.)
Electrical Input  
Power Rating 2400VA / 2250W
Nominal Voltage 120, 208 and 230 Vac2
Input Voltage Ranges (for user-selectable voltages) Low voltage: 77-152 V; High voltage: 154-288 V
Operating Frequency 50/60 Hz, Auto-sensing
Frequency Range 46-54 hz for 50 hz; 56-64 hz for 60 hz
Connections  
Input Connections L5-30P, (12' attached)
Output Receptacles (1) L5-30R, (6) 5-15R
Battery  
Battery Type Sealed, lead-acid; maintenance free
Battery Replacement Hot-swappable internal batteries and external batteries modules
Recharge Time <3 hours to 90% usable capacity
Start-On-Battery Allows start of UPS without utility input
Electrical Output  
On Utility Voltage Regulation -10% to +6% of nominal
On Battery Voltage Regulation  ±5% RMS
Voltage Wave Shape (on battery) Sine Wave
Output Protection Short circuit protection
Communications  
User Interface Front Control Panel
Audible Alarms For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault
Network Transient Protector UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection)
Communication Ports see Communications Slot
Communication Slot RS-232 single serial module (standard) options available, see options chart
Cable 6-foot communications cable included
Power Management Software Powerware Software Suite CD-ROM (bundled with UPS)
General  
Electrical Power Module Replacement Yes, hot-swap
Diagnostics Full system self-test on power up
UPS Bypass Internal Bypass
Transfer Time 4ms typical, 6ms max
Overload (normal operation) 100-102 % indefinite
Environmental  
Operating Temperature 0 to 40º C (32 to 104º F)
Storage Temperature -15 to 50º C (5 to 122º F)
Relative Humidity 0% to 95% non-condensing
Lightning & Surge Protection ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5
Surge Energy Rating high-energy 6500 A peak
Audible Noise less than 40 dBA typical
 Altitude 3000m (10,000 ft) without derating