Electrical Input | |
Voltage | 120Vac Nominal |
On Line Voltage Range | +20% for nominal voltage at full load |
Nominal Input Frequency | 45-65 Hz, 50/60 Hz; auto-sensing |
Input Protection | Reset-able circuit breaker |
Connection | 6 ft. cord w/5-I5P |
Electrical Output | |
Power Out | 500VA / 320W |
Online Regulation | -10%, +6% of nominal voltageNominal -10% to +8% |
On Battery Output Voltage | 115Vac +10% to -12%, 230Vac + 10% to -12% |
On Battery Frequency Regulation | +/-0.1 Hz of nominal frequency |
Voltage Wave Shape | Sine wave (during normal and battery operation) |
Indicators and Controls | |
Front Panel LEDs | Power on, on battery, overload, and battery fault |
Front Panel Buttons | On/Off and alarm silence/self-test |
Communications Port | DB9 female (UPS ships with communications cable); USB Interface Adapter is optional |
Power Factor | 0.64 |
Battery | |
Battery Type | Sealed, maintenance-free lead-acid; starved electrolyte |
Battery Description | (1) 12 V, 9 Ah |
Battery Recharge | < 3 hours to 90% capacity |
Battery Runtime | 5 minutes minimum |
Start-On-Battery | Startup with UPS batteries in absence of utility power |
General | |
Topology | Line-interactive |
Network Transient Protector | In and out RJ11 jack for telephone/modem protection (120 V models only) or RJ45 for 10Base-T network cable; UL497A tested |
Environmental and safety | |
Operating Temperature | 0oC to 40oC (32oF to 104oF) UL tested at 25oC (77oF) |
Safety Markings | UL, cUL, and CSA |
Safety Conformance | UL 1778, CAN/CSA C22.2, No. 107.1 |
EMC Markings | FCC Class B |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Immunity | IEC 801-2, -3, -4 |
Transit/Storage Temp. | -15oC to 55oC (5oF to 131oF) |
Audible Noise | < 45 dBA typical |
Relative Humidity | 5-95% non-condensing |