Upsite Technologies KoldLok 10013 Extended Raised Floor Grommets are designed to seal a variety of existing perimeter openings, with the added flexibility of modification for large and unique openings. Based on measurements at multiple data centers, 50-80% of valuable conditioned air is not reaching the air intake of IT equipment due to unsealed floor openings. This lost air, known as bypass airflow, contributes to IT equipment hotspots, cooling unit inefficiencies, and increasing infrastructure costs. KoldLok products specifically address bypass airflow and its detrimental effects on data center cooling.
Note: The Raised Floor Grommets are sold in a pack of 10.
A limited quantity of single units are available.
Quantity discounts available for orders of 12+. - Please contact us to discuss large quantity purchases.
Price: $1,089.60 NOW: $832.32 Save: $257.28
Benefits of KoldLok Grommets
Increases existing cooling unit capacity
Reduces the need to purchase additional cooling units
Improves equipment reliability and extends equipment life
Increases static pressure under the raised floor and improves cool air delivery through perforated tiles and floor grates
Facilitates Cold Aisle/Hot Aisle best practices
KoldLok Features:
Compatible with both 24 inch and 600 mm tiles
Can be modified to seal unique cable openings
Integrate with the raised floor static dissipation system, providing 1 GigaOhm of resistance
Contain no loose or partially fastened parts, which can become separated or fall through the raised floor
100% bypass airflow sealing in areas undisturbed by cable penetrations at static pressures up to 0.10 inches of water column
100% bypass airflow sealing with four 1/2 inch cables penetrating the Grommet at the static pressure required to cool up to 3 kW/cabinet
95% bypass airflow sealing with four 1/2 inch cables penetrating the Grommet at a static pressure of 0.50 inches of water column
KoldLok Extended Raised Floor Grommet Diagram
KoldLok 10013 Specifications:
Maximum Cutout Size Sealed: 24 x 7 in. (610 x 178 mm.)
Usable Cable Area: 22 x 5.5 in. (559 x 140 mm.)
Height above the raised floor: 1 in. (25 mm.) with mounting system installed
0.020 inch diameter upper filaments
0.036 inch diameter lower filaments
Approximately 10,000 filaments
Premium-grade nylon Type 6, ensuring flexibility and self-sealing recovery
Floor Mounting System: Standard self-tapping screws or custom adhesive mounting kit consisting of:
Double-sided, pressure sensitive foam with adhesive backing
Polyethylene foam pads for static dissipation
All foam components are non-particulating
Filament holder: anodized aluminum alloy, black finish
)
