Large Enterprise Environment Monitoring System - Dual AC PowerThe ENVIROMUX Enterprise Environment Monitoring System monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, LEDs, alarm beacon, siren, web page, network management (SNMP), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via external USB 3G modem). The system includes three internal sensors: temperature, humidity and power. It also supports 16 external configurable sensors, eight digital input sensors, and four output relays for control of external devices. - Monitor and manage server room environmental and security conditions over IP.
- Sensors supported:
- 16 external configurable sensors
- 8 digital inputs sensitive to contact closure
- 8 Remote Temperature/Humidity Sensors over IP
- Internal sensors – temperature, humidity, power
- Four output relays for control of external devices.
- Supports IP network video cameras for live view of any facility.
- Monitor (ping) up to 64 IP network devices.
- Create multiple alerts for any installed sensor.
- Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts.
- Alerts are posted in message log, which is accessible through Web user interface.
- Automatically configures network settings received from a connected DHCP server.
- Integrates with various Open Source monitoring packages - Nagios and MRTG.
- USB ports for connecting USB modem or for downloading log data to USB flash drive.
- Internal battery backup, Dual AC Power
- Up to five units can be connected via Ethernet connection or using CAT5 expansion cables to increase the number of sensors connected.
- 1RU rack mount case is standard.
- Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
- Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
Formerly the NTI ENVIROMUX-16DDP. | 
Price: $1,435.00
NOW: $1,319.54
Save: $115.46 | | 
Connection Specification | 1. Power Port | | | 100 to 240 VAC at 50 or 60 Hz via IEC connector. | | Power consumption: 35W | | Connection for Earth Ground. | | Fuse protection. | | Dual AC Power, If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the battery backup. | | 2. RJ45 Sensor Ports | 16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors. | | 3. Digital Inputs | | | Eight screw terminals pairs for connecting dry contact devices. | | Input voltage: 0VDC to +25VDC. | | Provides +12VDC, 50mA for terminals 1-7, and +12VDC, 650mA for terminal 8 only. | | Fuse protection. | | 4. Digital Outputs | | | Four screw terminals pairs. | | Potential-free relay switch contacts. | | Normally open / normally closed connection points. | | Maximum switching load: 0.5A at 100VAC, 1A at 30VDC, 0.5A at 48VDC. | | 5. Beacon Port | | | One screw terminal pair. | | Provides +12VDC, 180 mA to supply an alarm beacon. | | Fuse protection | | 6. Siren Port | | | One screw terminal pair. | | Provides +12VDC, 180 mA to supply a siren. | | Fuse protection | | 7. AUX Power | | | One screw terminal pair. | | Provides +12 VDC, 500 mA. | | 8. USB Device Ports | Four female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive. | | 9. USB Console Port | One female USB Type B connector for connecting a PC for serial terminal access. | | 10. RS232 (DCS) Port | One female RJ45 serial port for terminal access. | | 11. Ethernet Port | One 10/100 Base-T Ethernet port with RJ45 Ethernet connector. | | 12.RS232 AUX Port | One RJ45 port for connecting a serial GSM modem or a remote serially-controlled device. | | 13.Cascade In/Out Ports | Two RJ45 jacks. A maximum of 5 systems can be used in a cascaded configuration via RS485 to increase the number of sensor ports (1 master, 4 slaves). |
Product Specifications | Internal Temperature Sensor | | | Applications from 32 to 104°F (0 to 40°C). | | Accurate to within ±1.35°F (±0.75°C). | | Internal Humidity Senor | | | Applications from 20% to 80% relative humidity at temperatures between 32 to 104°F (0 to 40°C). | | Accurate to within ±5% relative humidity. | | Internal Power Sensor | | | Measures mains voltage: 0 to 255 VAC | | Measures battery voltage: 0 to 20 VDC | | Alerts are sent when there is a power outage and when power returns. | | Back-Up Battery | | | Rechargeable sealed lead-acid battery. | | Provides back-up for one hour. | | MTBF | 39,685 hours | | Dimensions | WxDxH: 16.19x10.01x1.75" | | Weight | 9.5 lb (4.31 kg). | | Environmental | | | Operating temperature: 32 to 104°F (0 to 40°C). | | Storage temperature: -22 to 140°F (-30 to 60°C). | | Operating /Storage Relative Humidity: 17 to 90% non-condensing RH. | | Regulatory Approvals | CE, RoHS | | Warranty | Two years |
| |
|
)
