Single-Zone Liquid Detection SystemThe ENVIROMUX Single-Zone Liquid Detection System monitors up to 1,640 feet (500 meters) of liquid/chemical detection sensor cable or an under carpet leak detection sensor. When the sensor detects a water or chemical leak, the system will notify you via a visual indicator (red LED) and an audible alarm. The E-LDA-LC2 can be used to monitor important places like base stations, warehouses, libraries, museums, and industrial sites etc. for real-time water/chemical leakages. You may also use in conjunction with other equipment like air-treatment devices, refrigeration motors, liquid containers, pump tanks, etc. to help monitor leakage. Cable sold separately. |
Price: $170.00 NOW: $156.32 Save: $13.68 | | The E-LDA-LC2's output relay contact can be used to control a siren or beacon for local alert or for controlling valves, other
devices, or automatic input systems. When wired properly, the relay can also be used to cause the E-xD to send an alert
message via email, SMS, SNMP or SYSLOG. The relay only changes state if there is a water leak. The output relay can
be normally-open or normally-closed, giving a level of customization
- Monitor up to 1,640 feet (500 meters) of
liquid/chemical detection sensor cable or an under carpet leak detection
sensor.
- Built-in audible and visible alarm notifications.
- Siren output level: 75 dB at 1 foot.
- Silence the audible alarm using the "CLR" button.
- Red LED lights up when a leak is detected.
- Adjustable leak alarm sensitivity thresholds.
- Use as a standalone monitoring device or integrate into a larger system
via the relay outputs.
- Configure for normally open or normally closed circuit connection.
- DIN-rail mountable.
- Will ship with either black or green screw terminals and labels.
Product Specifications Compatible sensors | | | E-LD-LCx-y Low-Cost Liquid Detection Sensor Cable | | E-LDx-y Liquid Detection Sensor Cable | | E-CDx-y Chemical Detection Sensor Cable | | E-UCLD-x Under Carpet Leak Detection Sensor | Dry Contact Closures | | | One screw terminal pair for connecting a liquid/chemical detection sensor cable or an under carpet leak detection sensor/td> | | Potential-free. | Output Relay | | | One screw terminal pair. | | Potential-free relay switch contacts. | | Normally open / normally closed connection points. | | Maximum switching load: 0.5A at 125VAC or 1A at 24VDC. | Serial Interface (Currently NOT Supported) | | | One screw terminal pair for RS485 two-wire network. | | (Currently NOT supported.) | Dimensions | | | WxDxH in: 1.41x4.19x2.44 (36x106x62 mm). | Power | | | One screw terminal pair. | | Provides +12VDC, 100mA | | Includes 12V, 1A power supply with country-specific line cord. | Environmental | | | Operating temperature: -4 to 122°F (-20 to 50°C). | | Storage temperature: -40 to 140°F (-40 to 60°C). | | Operating and Storage Relative Humidity: 5 to 95% non-condensing RH. | Regulatory Approvals | CE, RoHS | Warranty | Two Years |
E-LDA-LC2 Single-Zone Liquid Detection System installation guide
E-LDA-LC2 Single-Zone Liquid Detection System Data Sheet | |
|