Rack Cable Ladder Mounting / Support

Cable Runway Ceiling Support Kit

The threaded ceiling support kit is used to suspend Cable Runways from the ceiling. Material is steel, finished with gold over zinc plating. Note, drawing shows 2 kits.

• (1) Ceiling support bracket
• (1) Either 3/8-16 x 6', 5/8-11 x 6', M10 x 2m or M16 x 2m threaded rod
• (1) Runway support bracket
• (4) Either 3/8-16, 5/8-11, M10 or M16 hex nuts

Triangular Support Bracket - Aluminum

Triangular Support Bracket provides wall support for Cable Runway. Made of 1/4" x 2" aluminum bar. Load rating is 100 lb (45.4 kg).

• (1) Triangular bracket
• (2) 5/16-18 x 2 1/4" J-bolts
• (2) 5/16-18" hex nuts & 5/16" lock washers

Triangular Support Bracket - Steel

Triangular Support Bracket provides wall support for cable runway. Made of cold-rolled steel. Load rating is 400 lb (181.4 kg).

• (1) Vertical wall-mounting bracket
• (1) Runway support channel
• (1) Angle support channel
• (3) Clevis pins (5/16" diameter) & cotter pins
• (2) 5/16-18 x 2 1/4" J-bolts
• (2) 5/16-18" hex nuts & 5/16" lock washers

Wall Angle Mounting Bracket Kit

2" x 2" x .105" steel wall support angle is designed for wall-mounting specific widths of Cable Runway.

• (1) Wall angle
• (2) 5/16-18 x 2 1/4" J-bolts
• (2) 5/16-18" hex nuts
• (2) 5/16" lock washers

Vertical Wall Brackets

Used to secure Cable Runway with 1-1/2" x 3/8" stringers to a wall. Sold in pairs.

• Material is 1/4" x 1-1/2" steel
• Gold color over zinc plating or painted
• Wall mounting hardware not included

Cable Runway Foot Kit, Floor or Wallmount

To attach and secure Cable Runway to a wall or floor. Foot made of 3/8" x 1-1/2" x 6"H steel.

• (2) Cable rack feet
• (4) Splice plates
• (2) 3/8-16 x 2 1/4" trimmed round head square neck bolts
• (2) 3/8-16" hex nuts
• (2) 3/8" lock washers

Adjustable Floor Support Channel

Use for floor support of Cable Runway. Note, drawing shows 1/2 Pair.

• Sold in pairs
• Cable Runway height adjustable from 3" to 8"
• Must be securely fastened to floor with 5/8" rods and anchors (included)

Adjustable Floor Support Stands

Use for floor support for cable runway grids. Design allows mounting of any width cable runway. Heights can be adjusted from 5” to 10” (130 mm to 250 mm). Sold in pairs.

• (2) 2" pipe caps
• (2) Floor flanges
• (2) 2" pipe
• (4) Grid clamps
• (2) Spacers, 3/8" x 1.5"
• (2) 5/8-11" threaded rod
• (2) 5/8" lock washers
• (6) 5/8-11" nuts

Cabinet Mounting & Elevation Kit*

Supports Cable Runway above a row of Rack Cabinets of varying heights, and provides additional space between the tops of the racks or cabinets and the cable runway, which can create smoother transition of cables.

• Three ranges of incremental elevation
• Can be mounted perpendicular or parallel
• Cabinet kits include two pairs of brackets and assembly hardware
• Cabinet kits attach directly to the top of the cabinet