42U x 750mm x 1070mm Cabinet

RakworX R-Series 42U 600MM Sever Rack Specifications:

Mechanical  
Height 78.72"in (1999.5mm)
Width 29.53"in (750mm)
Depth 42.13"in (1070mm)
Weight 264.56" lbs. (120kgs)
Weight Capacity (static load) 3306.93" lbs. (1500kgs)
Weight Capacity (dynamic load) 2645.54" lbs (1200kgs)
Minimum Mounting Depth 190.5mm, 7.5"in
Maximum Mounting Depth 918.5mm, 2024.95"in
Rack Height 42U
Color Black
42U x 750mm x 1070mm Cabinet - Click to enlarge


Price: $1,692.00
NOW: $1,586.25
Save: $105.75
Free Project Evaluation
Rack Units42U

RakworX RCS72107 Features:

  • Quick-Release Doors
    • The front door can be changed to the opposite side or interchanged with the rear doors. Doors can be easily removed by simple lift-off.
  • Half-Height Side Panels
    • Half-height side panels make suitable size and weight for easy handling and mounting to rack. Side panels are lockable utilizing the same key with the doors.
  • Eyebolt Support Integrated Into The Frame
    • Integrated eyebolt holes at the top of the rack frame allow the rack to be lifted for movement and placement using eyebolt lift machines.
  • Cable Access Openings in the Roof
    • Large cable access knock-out holes in the roof provide access for overhead cable entry and provisions for air containment. The bottom design allows for unobstructed cable access through a raised floor.
  • Perforated front and rear doors
    • Perforated front door and rear doors provide ample ventilation for servers and networking equipment. The front door perforated area is optimized with a curved profile to provide greater surface area and allowance of more perforation coverage and higher perforation ratings.
  • Hardware provided
    • All Rackworx racks include the necessary hardware for mounting relevant IT equipment.
  • Easily Removable Cable Access Roof
    • The roof can be simply removed with pull-pin hinges for access during equipment installation or even with cabling already in place and routed through the cable openings. And the roof is reversible to reposition the larger cable openings for power distribution plugs and connectors.
  • Equipment mounting rails integrate with patch cabling systems
    • Equipment mounting rails include zero U mounting holes beside the EIA 19" mounting space, which allow the installation of a Data Distribution Cable patch system without taking up any critical equipment U-space.
  • Integrated Baying Hardware
    • Rack includes pre-installed baying hardware which helps create a physical barrier between hot and cold air that discourages recirculation. The pre-installed baying hardware includes holes for joining rack at 600MM centers or 24” centers, depending on the floor layout.
  • Castors and Adjustable Leveling Feet
    • Racks are shipped standard with both leveling feet and castors. Leveling feet can be quickly adjusted through the use of a screwdriver or drill.
  • Perforated Split Rear Doors
    • The split rear doors help to maximize floor space and need a small room for a door swing.
  • Adjustable Mounting Rails
    • The vertical mounting rails can be adjusted for various depth IT equipment. Clear U positions are numbered front and back for rapid installation of equipment.
  • Full Height Accessory Channels
    • The full height accessory channel provides tool-free installation for accessories without occupying U space.