NTI E-VSSR-10

Rugged Vibration Sensor - Detect Over- or Under-Vibration in Machinery

No reviews yet

$1,190.00

$1,094.25

(You save $95.75 )

For registering over- or under-vibration in machinery such as large motors, gear boxes, turbines, pumps, blowers, crushers, compressors, blenders, hammermils, and conveyors.
Adjustable over/under alarm sensitivity: 0.1 to 2.2 in/s (2.5 to 55 mm/s) rms.
Minimum vibration frequency (-3db): 10 Hz.
Maximum vibration acceleration: ±1.76 oz (±50 g) peak.
Isolated NPN output is fail-safe.
Screw terminal.
- 10 ft attached cable.
- To connect to the RJ45 inputs on an ENVIROMUX system, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Cast aluminum enclosure is rated NEMA 4X.
Includes 24V, 1.5A power supply.
- DIN rail mountable.
Operating temperature: -40 to 185°F (-40 to 85°C).
Dimensions WxDxH (in): 3.94x2.56x1.66 (100x65x42 mm).

For registering over- or under-vibration in machinery such as large motors, gear boxes, turbines, pumps, blowers, crushers, compressors, blenders, hammermils, and conveyors.
Adjustable over/under alarm sensitivity: 0.1 to 2.2 in/s (2.5 to 55 mm/s) rms.
Minimum vibration frequency (-3db): 10 Hz.
Maximum vibration acceleration: ±1.76 oz (±50 g) peak.
Isolated NPN output is fail-safe.
Screw terminal.
- 10 ft attached cable.
- To connect to the RJ45 inputs on an ENVIROMUX system, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Cast aluminum enclosure is rated NEMA 4X.
Includes 24V, 1.5A power supply.
- DIN rail mountable.
Operating temperature: -40 to 185°F (-40 to 85°C).
Dimensions WxDxH (in): 3.94x2.56x1.66 (100x65x42 mm).

No resources are available for this product at this time.

Request a document below.*

For information regarding orders or shipping, please visit the Ordering Information page.

*Subject to availability