Please note, the Server Tech CW-24V2C311A1 has been discontinued. For other replacement options, please contact your Server Racks Online sales representative.
The Server Tech CW-24V2C311A1 is the Switched 24V(C13-C19) CDU which combines remote configuration and management with power distribution, power monitoring and environmental monitoring. Reboot a single or dual-power server with one command. Receive SNMP alerts when power or environmental conditions exceed thresholds. Assign users specific access rights to designated outlets or groups. Choose one power distribution unit for your high-density cabinets.
The serial and network connections are conveniently located in the top of the unit. The power cord entry for this unit comes in from the bottom.
Only our Switched CDU products provide the flexibility needed for all data centers and remote sites, including power requirements for high-amp, high voltage; UL 60950-1 branch circuit protection; EN 60950-1:2001; SSL & SSH security; and SNMP-based input current monitoring.
*Note: Please note that the depths of these enclosures are 3.0" deep at the placement of the fuse retractors.
**NOTE: A 10 foot L6-30P power cord is included at no additional cost.
Price $1,050.00
Rack Units
0U
Dimensions
69"H x 1.75"W x 2.25"D
Server Tech CW-24V2C311A1 Switched PDU Features:
Easy to use and access, secure, integral HTML Web GUI over HTTP/S, plus LDAP/S and TACACS+ external authentication and authorization support
Secure remote power management; reboot individual or grouped outlets (SSL, SSH, Telnet, SNMP, RS-232)
Outlets may be linked to one or multiple groups without loss of control of that individual outlet
Native power-up sequencing prevents in-rush current overload during initial start-up or after power loss. Unlike other products on the market, sequencing occurs during initial startup, after power loss and after user-initiated power cycling to prevent overload
True RMS input current monitor(s) on easy-to-read local LED, via network or serial connection
Optional temperature and humidity probes with 10-ft cords to allow sensors to be located in different locations
SNMP traps provide automated alerts for power and environmental conditions. Additionally, event notification is available via Syslog and email
Expandability: add additional outlets under one IP address through link unit
Local and remote notification if a branch circuit is down (FE will display on LED and through the web-based interface, SNMP and email alerts)
3 Phase products have a separate LED for each phase to simplify load balancing
*Note: Additional product specifications are below.
)
