Remote Power Monitoring
Monitor input power via IP or serial interface. HTTP/HTTPs Web Configuration & Control
Use the Web interface to configure each unit's network settings. SNMP traps for environmental & power thresholds and firmware updates. Also use the Web interface to monitor key values, including amperage load(s), temperature/humidity and other environmental conditions. SSL security provides a secure HTTPs connection. SNMP Management & Event Notification
The CS-15HDV454C3-013 supports the Simple Network Management Protocol (SNMP). This allows network management systems to use SNMP requests to retrieve information such as input power, temperature and humidity. The PDU includes an SNMP v1 agent supporting standard MIB I and MIB II objects. A private enterprise MIB extension (Sentry3 MIB) is also supported to provide remote power control. SNMP traps can be generated for various events, including Input Current Load Thresholds (min & max), Temperature Thresholds (min & max), Humidity Thresholds (min & max), water indication, and closed contacts (cabinet doors open/close). Add a Second Tower
Connect an Expansion Cabinet PDU to the CS-15HDV454C3-013 Smart Cabinet PDU to control two power input circuits and monitor power in the Data Center cabinet (individual or groups) under 1 IP address - our exclusive strategy for managing dual power-supply servers. Secure Access - SSH or SSL Protection
Secure Shell (SSH), known as Secure Socket Shell, is a Unix-based command interface and protocol for securely getting access to a remote device. Sentry supports SSHv2. Secure Sockets Layer (SSL) is a commonly-used protocol for managing the security of a message transmission on the Internet. SSL is an integral part of most Web browsers (clients) and Web servers. Sentry supports SSLv3/TLSv1. Integrated Temperature and Humidity Probe Support
Two RJ-style connectors located on the face panel of the PDU's enclosure provide support for two Integrated Temperature & Humidity Probes with ten-foot cables provide real-time measurements in the data center cabinet. Firmware Flash Upgradeable
Access new firmware updates via FTP for new firmware features and code releases. An update to the firmware does not affect the status of the power outlets. LDAP/LDAPS
The CS-15HDV454C3-013 supports Lightweight Directory Access Protocol (LDAP) Version 3 including LDAPS (LDAP over TSL/SSL). This support enables authentication with LDAP servers; user accounts do not need to be individually created locally on each Sentry device. This allows administrators to pre-define and configure (in each PDU, and in the LDAP server) a set of necessary LDAP groups, and access rights for each. User's access rights can then be assigned or revoked simply by making the user a member of one or more pre-defined Sentry LDAP groups. User account can be added, deleted, or changed in the LDAP server without any changes on individual PDU units. Sentry LDAP support has been tested in the following environments: - Microsoft Active Directory (MSAD)
- Novell eDirectory (eDir)
- Open LDAP
RS-232 Control
Serial control via any device with a bi-directional serial port, including a PC, laptop, KVM switch, Console Port Access switch, or terminal server. Server Technology CS-15HDV454C3-013 Specifications: | Mechanical | | | Height | 3.5 in. (89 mm) | | Width | 17 in. (432 mm) | | Depth | 14 in. (356 mm) | | Output | | | Nominal Output Voltage | 240 VAC | | Output Connections | (12) IEC60320 C19;
(3) IEC60320 C13 | | Input | | | Nominal Input Voltage | 240V 3-phase Delta, 50/60 Hz | | Input Connections | CS8365C Plug | | Power Cord Length | 10 ft (3 m) | | Conformance | | | Regulatory Approvals | US & Canada (cTUVs mark) to UL 60950-1:2007 and CAN/CSA 22.2 No. 60950-1-07 | | FCC | Class A, Part 15 | | CISPR | 22 Class A |
| 
)
