Here is how the program works:
Note: We must receive the order by 9:30am MST for it to be eligible to ship the next business day.
]]>With a few additional inches and rack units, you may also want to consider 11U & 12U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>With a couple of additional inches and rack units, you may also want to consider 12U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>With a couple of additional inches and rack units, you may also want to consider 13U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>With one less rack unit, you may also want to consider 12U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>14 Ft. Shielded CAT 5E Molded Patch Cable in Yellow. Protect your network data from EMI/RFI interference.
14 Ft. CAT 5E Patch Cable Features:
With a couple of additional inches and rack units, you may also want to consider 18U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Within a couple of rack units, you may also want to consider 15U & 18U.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Chatsworth 18"D Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 12U to 40U | 18" | 19" EIA | 24" |
Great Lakes 18"D Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes WM-Series | 12U to 25U | 18", 24" | 19" EIA | 21" |
Kendall Howard 21"D Server Racks |
Kendall Howard 6U - 16U Server Racks | Height | Depth* | Rails | Width* |
8U Security Wall Rack | 8U | 21" | 19" EIA | 22" |
With a couple of additional inches and rack units, you may also want to consider 22U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Kendall Howard 18U - 27U Server Racks | ||||||||||||
|
Liebert DCF 24U Server Rack |
Part Number | Height | Width | Depth |
F4611 | 24U | 23.6" | 43.3" |
Chatsworth 18U-26U Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 18U, 26U | 13" to 30" | 19" EIA | 24", 27.3" |
Great Lakes 18U-26U Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes GL480E-2432F | 24U | 32" | 19" EIA | 24" |
Great Lakes 4801e-2432 | 24U | 32" | 19" EIA | 24" |
Great Lakes GL480ES-2442MS | 24U | 42" | 19" EIA | 24" |
Great Lakes WS-Series | 18U, 25U | 24" | 19" EIA | 24" |
Great Lakes WD-Series | 18U, 25U | 30" | 19" EIA | 24" |
Great Lakes WM-Series | 19U, 25U | 18", 24" | 19" EIA | 21" |
Great Lakes NEMA-Series | 19U, 26U | 24" | 19" EIA | 24" |
Liebert MCR Climate-Controlled NEMA 12 Cabinets |
Part Number | Height | Width | Depth | Description |
MCR-22U-T | 22U | 23.5" | 38" | with 1.6 kW (5621 BTU) Rack-top mount Cooling Unit. Includes Casters and locking doors. |
APC NetShelter 24U Server Rack |
APC NetShelter Rack Enclosures | Height | Depth* | Rails | Width* |
APC NetShelter AR3104 | 24U | 42" | 19" EIA | 24" |
APC NetShelter SX Secure Soundproof Office Racks |
APC NetShelter SX Enclosures | Finish | Height | Depth* | Rails | Width* |
APC AR4018A | Oak | 18U | 44" | 19" EIA | 30" |
APC AR4018X429 | Black | 18U | 44" | 19" EIA | 30" |
APC AR4018X431 | Dark Grey | 18U | 44" | 19" EIA | 30" |
APC AR4018X432 | White | 18U | 44" | 19" EIA | 30" |
APC AR4024A | Oak | 24U | 44" | 19" EIA | 30" |
APC AR4024X429 | Black | 24U | 44" | 19" EIA | 30" |
APC AR4024X431 | Dark Grey | 24U | 44" | 19" EIA | 30" |
APC AR4024X432 | White | 24U | 44" | 19" EIA | 30" |
Belkin 24U Server Rack |
Belkin Rack Enclosures | Height | Depth* | Rails | Width* |
Belkin RK1002 | 24U | 42" | 19" EIA | 24" |
Rittal TS8 24U Server Rack |
1-Day Express Program - can configure with most options |
Rittal TS8 Rack Enclosures | Height | Depth* | Rails | Width* |
Rittal TS8 9969831 | 24U | 40" | 19" EIA | 24" |
Rittal TS8 9969845 | 24U | 42" | 19" EIA | 24" |
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Within a couple of rack units, you may also want to consider 18U & 22U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>
Great Lakes 1U Filler Panel
Dimensions: 1U, 1.719"H x 19"W
Centers: 18.312"W
Dimension "A": 1.25"
Dimension "B": 0.234"
To make the customer's data center and server room experience easier and more enjoyable, Raloy expanded its product line to include rackmount LCD monitors, integrated KVM switches and Sun certified rackmount lcds, as well as rackmounted keyboard drawers. Today, the company offers comprehensive rackmount server solutions for datacenter and server room applications.
]]>This 1U Rackmount Keyboard Drawer is19" EIA compliant and can be mounted in a 2-post rack (also called a 2-post relay rack). This rackmount keyboard can also be mounted in a standard 19" 4-post rack.
Features:
Kendall Howard 6U - 15U Server Racks |
Kendall Howard 6U - 16U Server Racks | Height | Depth* | Rails | Width* |
8U Compact Rack | 8U | 31" | 19" EIA | 23" |
8U Security Wall Rack | 8U | 21" | 19" EIA | 22" |
8U Wallmount Rack | 8U | 24" | 19" EIA | 23" |
12U Compact Rack | 12U | 31" | 19" EIA | 23" |
12U Corner Wallmount Enclosure | 12U | 27" | 19" EIA | 27" |
6U - 15U LINIER Fixed & Swing-out Racks | 6U-15U | 22"-26" | 19" EIA | 23" |
Chatsworth 12U Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 12U | 13" to 30" | 19" EIA | 24" |
Great Lakes 10U-13U Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes GL24WE | 10U | 36" | 19" EIA | 21" |
Great Lakes WS-Series | 11U | 24" | 19" EIA | 24" |
Great Lakes WD-Series | 11U | 30" | 19" EIA | 24" |
Great Lakes WM-Series | 12U | 18", 24" | 19" EIA | 21" |
Great Lakes NEMA-Series | 12U | 24" | 19" EIA | 24" |
Great Lakes 3001e-2432 | 13U | 32" | 19" EIA | 24" |
APC NetShelter 13U Server Rack |
APC NetShelter Rack Enclosures | Height | Depth* | Rails | Width* |
APC NetShelter AR100 | 13U | 24" | 19" EIA | 23" |
APC NetShelter AR100HD | 13U | 24" | 19" EIA | 23" |
APC NetShelter SX Secure Pre-Configured Soundproof Office Racks |
APC NetShelter SX Enclosures | Finish | Height | Depth* | Rails | Width* |
APC AR4000MV | Oak | 12U | 36.6" | 19" EIA | 27" |
APC AR4000MVX429 | Black | 12U | 36.6" | 19" EIA | 27" |
APC AR4000MVX431 | Dark Grey | 12U | 36.6" | 19" EIA | 27" |
APC AR4000MVX432 | White | 12U | 36.6" | 19" EIA | 27" |
NetClosure Server Racks |
NetClosure Rack Enclosures | Height | Depth* | Rails | Width* |
NetClosure NCRACK-117-12 - Portable | 12U | 19-29" | 19" EIA | 22" |
NetClosure NC151-3500 | 16U | 40" | 19" EIA | 24" |
NetClosure NC151-3501 | 16U | 40" | 19" EIA | 24" |
Mount hardware to a wall, a ceiling, or under a desk - Patch Panel Brackets, CPU Brackets, Vertical Rack Brackets, Wall Lock Box, etc.
Wall Mount Brackets | Height | Depth* | Rails | Width* |
1U Hinged Wall Rack, 6"D | 1U | 6" | 19" EIA | 19" |
2U Hinged Wall Rack, 6"D | 2U | 6" | 19" EIA | 19" |
4U Hinged Wall Rack, 6"D | 4U | 6" | 19" EIA | 19" |
6U Hinged Wall Rack, 6"D | 6U | 6" | 19" EIA | 19" |
2U Vertical Rack | 2U | Any | 19" EIA | 19" |
2U Vertical Rack - Tapped Rails | 2U | Any | 19" EIA | 19" |
3U Vertical Rack | 3U | Any | 19" EIA | 19" |
3U Vertical Rack - Tapped Rails | 3U | Any | 19" EIA | 19" |
4U Vertical Rack | 4U | Any | 19" EIA | 19" |
4U Vertical Rack - Tapped Rails | 4U | Any | 19" EIA | 19" |
V-Line 12U Fixed Wall Rack | 12U | 12" | 19" EIA | 19" |
V-Line 16U Fixed Wall Rack | 16U | 12" | 19" EIA | 19" |
6U to 16U racks are smaller enclosures that are ideal for securing servers & network equipment in a office or confined space. Also within the same height range, you may want to consider Wall Mount Racks and Portable Racks for your rackmount requirements.
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>With a couple of additional inches and rack units, you may also want to consider 24U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Kendall Howard 24"D Server Racks |
Kendall Howard 6U - 16U Server Racks | Height | Depth* | Rails | Width* |
8U Wallmount Rack | 8U | 24" | 19" EIA | 23" |
12U Corner Wallmount Enclosure | 12U | 27" | 19" EIA | 27" |
6U - 42U LINIER Fixed & Swing-out Racks | 6U to 42U | 22" to 26" | 19" EIA | 23" |
Chatsworth 24"D Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 12U to 40U | 13" to 30" | 19" EIA | 24" |
Great Lakes 24"D Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes WS-Series | 11U to 25U | 24" | 19" EIA | 24" |
Great Lakes WM-Series | 12U to 25U | 18", 24" | 19" EIA | 21" |
Great Lakes NEMA-Series | 12U to 26U | 24" | 19" EIA | 24" |
APC NetShelter 24"D Server Rack |
APC NetShelter Rack Enclosures | Height | Depth* | Rails | Width* |
APC NetShelter AR100 | 13U | 24" | 19" EIA | 23" |
APC NetShelter AR100HD | 13U | 24" | 19" EIA | 23" |
Liebert DCF 24U Server Racks |
Part Number | Height | Width | Depth |
F4611 | 24U | 23.6" | 43.3" |
Great Lakes 24U Server Racks |
Great Lakes E & ES-Series Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes 4801e-2432 | 24U | 32" | 19" EIA | 24" |
Great Lakes GL480ES-2442MS | 24U | 42" | 19" EIA | 24" |
APC NetShelter 24U Server Cabinets / Server Rack Enclosures |
APC NetShelter Server Racks | Height | Depth* | Rails | Width* |
APC NetShelter AR3104 | 24U | 42" | 19" EIA | 24" |
APC NetShelter SX Secure Pre-Configured Soundproof Office Racks |
APC NetShelter SX Enclosures | Finish | Height | Depth* | Rails | Width* |
APC AR4024A | Oak | 24U | 44" | 19" EIA | 30" |
APC AR4024X429 | Black | 24U | 44" | 19" EIA | 30" |
APC AR4024X431 | Dark Grey | 24U | 44" | 19" EIA | 30" |
APC AR4024X432 | White | 24U | 44" | 19" EIA | 30" |
Rittal TS8 24U Server Rack |
1-Day Express Program - can configure with most options |
Rittal TS8 Rack Enclosures | Height | Depth* | Rails | Width* |
Rittal TS8 9969831 | 24U | 40" | 19" EIA | 24" |
Belkin 24U Server Rack |
Belkin Rack Enclosures | Height | Depth* | Rails | Width* |
Belkin RK1002 | 24U | 42" | 19" EIA | 24" |
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
With a couple of additional inches and rack units, you may also want to consider 25U & 26U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Being a standard rack height, you may also want to consider 24U Server Racks. With one more rack unit, also worth noting are 26U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>The HH Server Racks, are configured to be compatible with most computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
Server Rack FeaturesAll Server Racks feature a steel frame for added stability. The Server Rack Doors have continuous hinges for flawless operation. The top panel is vented so a fan can be added for more ventilation. | Server Rack SpecificationsOur Server Racks are made with .060 (16 Gauge) CRS steel and you have your choice of colors (IBM blue, Black, Pearl White, Light and Dark Gray) | |
Server Rack AccessoriesOur Server Racks have multiple options for Front Doors including Solid Steel, Louvered, Plexiglas, Perforated Steel, and Perforated Steel with Plexiglas insert. All doors are lockable and secure. We offer solid and removable side panels for your convenience. All Server Rack Doors are full length for added security. We also offer multiple power strips that fit behind the rails so they don't take up any additional rack space. An exhaust fan can also be added to any Server Rack for ventilation. | Server Rack DimensionsAll of our Server Racks are 19" EIA Rack Mount Standard Width. You have your choice of heights from 76" to 90" and depths from 30" to 40". |
Chatsworth 26U Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 26U, 33U, 40U | 18" to 30" | 19" EIA | 27.3" |
Which is the best 25U Rack for me?
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
Being a standard rack height, you may also want to consider 24U Server Racks. With one more rack unit, also worth noting are 27U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>External Dimensions: | 23" width x 51.5" height x 30" depth |
Internal Dimensions: | 19" rails x 45.5" height x 28.25" depth |
Weight Capacity: | 2,000 LBS |
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
]]>External Dimensions: | 23" width x 51.5" height x 36" depth |
Internal Dimensions: | 19" rails x 45.5" height x 34.25" depth |
Weight Capacity: | 2,000 LBS |
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
]]>Being a standard rack height, you may also want to consider 24U Server Racks. With one less rack unit, also worth noting are 26U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>
Great Lakes 2U Filler Panel
Dimensions: 2U, 3.469"H x 19"W
Centers: 18.312"W
Dimension "A": 3"
Dimension "B": 0.234"
Visit our Rackmount Monitors page for a wide variety of Rack Mount LCD Monitors.
2U Folding 15" Rackmount LCD Monitor, Keyboard, Trackball Specifications:
| Power supply
|
Visit our Rackmount Monitors page for a wide variety of Rack Mount LCD Monitors.
2U Folding 15" Rackmount LCD Monitor, Keyboard, Trackball, 8 Port KVM (SRO215-208KVM).This Rack Mount LCD Monitor comes with Eight 6' KVM Cables
Specifications:
| Power supply
|
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Chatsworth 30"D Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 12U to 40U | 13" to 30" | 19" EIA | 24" |
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Kendall Howard 31"D Server Racks |
Kendall Howard 6U - 16U Server Racks | Height | Depth* | Rails | Width* |
8U Compact Rack | 8U | 31" | 19" EIA | 23" |
12U Compact Rack | 12U | 31" | 19" EIA | 23" |
Chatsworth 30"D Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 12U to 40U | 13" to 30" | 19" EIA | 24" |
Great Lakes 30" & 32" Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes WD-Series | 11U to 25U | 30" | 19" EIA | 24" |
Great Lakes 3001e-2432 | 13U | 32" | 19" EIA | 24" |
Great Lakes GL480E-2432F | 24U | 32" | 19" EIA | 24" |
Great Lakes 4801e-2432 | 24U | 32" | 19" EIA | 24" |
Great Lakes 6001e-2432 | 31U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2432 | 37U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2932 | 37U | 32" | 19" EIA | 29" |
Great Lakes 8401e-2432 | 44U | 32" | 19" EIA | 24" |
Great Lakes 8401e-2932 | 44U | 32" | 19" EIA | 29" |
Great Lakes 8401e-2936 | 44U | 32" | 19" EIA | 29" |
Great Lakes 31U Server Racks |
Great Lakes E-Series Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes 6001e-2432 | 31U | 32" | 19" EIA | 24" |
Which is the best 31U Rack for me?
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
With a couple of additional inches and rack units, you may also want to consider 33U Server Racks. Being a popular rack size in the same range, also worth noting are 27U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Kendall Howard 37U Server Racks | ||||||||||||
|
Great Lakes 31U-38U Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes 6001e-2432 | 31U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2432 | 37U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2436 | 37U | 36" | 19" EIA | 24" |
Great Lakes 7201e-2932 | 37U | 32" | 19" EIA | 29" |
Great Lakes 7201e-2936 | 37U | 36" | 19" EIA | 29" |
Chatsworth 33U-40U Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Wallmount Cabinets | 33U, 40U | 18" to 30" | 19" EIA | 27.3" |
APC NetShelter SX Secure Soundproof Office Racks |
APC NetShelter SX Enclosures | Finish | Height | Depth* | Rails | Width* |
APC AR4038A | Oak | 38U | 44" | 19" EIA | 30" |
APC AR4038X429 | Black | 38U | 44" | 19" EIA | 30" |
APC AR4038X431 | Dark Grey | 38U | 44" | 19" EIA | 30" |
APC AR4038X432 | White | 38U | 44" | 19" EIA | 30" |
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Kendall Howard 31"D Server Racks |
Kendall Howard 6U - 16U Server Racks | Height | Depth* | Rails | Width* |
8U Compact Rack | 8U | 31" | 19" EIA | 23" |
12U Compact Rack | 12U | 31" | 19" EIA | 23" |
Great Lakes 32" Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes WD-Series | 11U to 25U | 32" | 19" EIA | 24" |
Great Lakes 3001e-2432 | 13U | 32" | 19" EIA | 24" |
Great Lakes GL480E-2432F | 24U | 32" | 19" EIA | 24" |
Great Lakes 4801e-2432 | 24U | 32" | 19" EIA | 24" |
Great Lakes 6001e-2432 | 31U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2432 | 37U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2932 | 37U | 32" | 19" EIA | 29" |
Great Lakes 8401e-2432 | 44U | 32" | 19" EIA | 24" |
Great Lakes 8401e-2932 | 44U | 32" | 19" EIA | 29" |
Great Lakes 8401e-2936 | 44U | 32" | 19" EIA | 29" |
Being within a few rack units, you may also want to consider 31U & 37U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Chatsworth 33U Server Racks |
Chatsworth CPI Rack Enclosures | Height | Depth* | Rails | Width* |
Chatsworth CUBE-iT Server Cabinets | 33U | 18" to 30" | 19" EIA | 27.3" |
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Kendall Howard 36"D Server Racks | ||||||||||||
|
Great Lakes 36"D Server Racks |
Great Lakes Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes 7201e-2436 | 37U | 36" | 19" EIA | 24" |
Great Lakes 7201e-2936 | 37U | 36" | 19" EIA | 29" |
Great Lakes GL840E-2436MP | 44U | 36" | 19" EIA | 24" |
Great Lakes 8401e-2436 | 44U | 36" | 19" EIA | 24" |
Liebert 36"D MCR Climate-Controlled NEMA 12 Cabinets |
Part Number | Height | Width | Depth | Description |
MCR-22U-T | 22U | 23.5" | 38" | with 1.6 kW (5621 BTU) Rack-top mount Cooling Unit. Includes Casters and locking doors. |
MCR-42U-RB | 42U | 23.5" | 38" | with 1.6 kW (5621 BTU) Rack-mount Cooling Unit, + 0.8 kW (2811 BTU) Back-Up Cooling Module. Includes Casters, Locking Doors, High Temp Alarm, and 19" x 38" Duct Adapter. |
APC NetShelter 36"D SX Secure Pre-Configured Soundproof Office Racks |
APC NetShelter SX Enclosures | Finish | Height | Depth* | Rails | Width* |
APC AR4000MV | Oak | 12U | 36.6" | 19" EIA | 27" |
APC AR4000MVX429 | Black | 12U | 36.6" | 19" EIA | 27" |
APC AR4000MVX431 | Dark Grey | 12U | 36.6" | 19" EIA | 27" |
APC AR4000MVX432 | White | 12U | 36.6" | 19" EIA | 27" |
Great Lakes 36"D Co-Lo Server Enclosures |
Great Lakes Co-Lo Enclosures | Compartments | Height | Depth | Rails | Width |
Great Lakes GL84CL2MM | 2 | 21U each | 36" | 19" EIA | 28" |
Great Lakes GL84CL2PF | 2 | 21U each | 36" | 19" EIA | 28" |
Great Lakes GL84CL3MM | 3 | 14U each | 36" | 19" EIA | 28" |
Great Lakes GL84CL3PF | 3 | 14U each | 36" | 19" EIA | 28" |
We do not currently offer 36U racks online. If a 36U rack is right for you, please contact our Sales Representatives for assistance. Alternatively you may want to consider 33U or 37U Server Racks.
Which is the best 36U Rack for me?
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>External Dimensions: | 23" width x 69" height x 30" depth |
Internal Dimensions: | 19" rails x 63" height x 28.25" depth |
Weight Capacity: | 2,000 LBS |
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
]]>External Dimensions: | 23" width x 69" height x 36" depth |
Internal Dimensions: | 19" rails x 63" height x 34.25" depth |
Weight Capacity: | 2,000 LBS |
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.]]>
Great Lakes 37U Server Racks |
Great Lakes E-Series Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes 7201e-2432 | 37U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2436 | 37U | 36" | 19" EIA | 24" |
Great Lakes 7201e-2932 | 37U | 32" | 19" EIA | 29" |
Great Lakes 7201e-2936 | 37U | 36" | 19" EIA | 29" |
Kendall Howard 37U Server Racks | ||||||||||||
|
Which is the best 37U Rack for me?
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimension requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776 or join us on Live Chat.
Being within a few rack units, you may also want to consider 33U & 40U Server Racks.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>System Requirements:
Great Lakes 3U Filler Panel
Dimensions: 3U, 5.219"H x 19"W
Centers: 18.312"W
Dimension "A": 2.25"
Dimension "B": 1.484"
Great Lakes 4-Post Racks |
Great Lakes 4-Post Open Racks - 12-24 threaded | Height | Depth | Rails | Width |
Great Lakes 4p1224-24 | 45U | 24" | 19" EIA | 22.25" |
Great Lakes 4p1224-29 | 45U | 29" | 19" EIA | 22.25" |
Great Lakes 4p1224-32 | 45U | 32" | 19" EIA | 22.25" |
Great Lakes 4p1224-36 | 45U | 36" | 19" EIA | 22.25" |
Great Lakes 4-Post Open Racks - M6 threaded | Height | Depth | Rails | Width |
Great Lakes 4PHD29 | 42U | 29" | 19" EIA | 20.60" |
Great Lakes 4pm6-24 | 45U | 24" | 19" EIA | 22.25" |
Great Lakes 4pm6-29 | 45U | 29" | 19" EIA | 22.25" |
Great Lakes 4pm6-32 | 45U | 32" | 19" EIA | 22.25" |
Great Lakes 4pm6-36 | 45U | 36" | 19" EIA | 22.25" |
Kendall Howard 4-Post Rack |
Kendall Howard Open Frame Racks | Height | Depth* | Rails |
4 Post Open Frame Rack | 41U | 36" | 19" EIA |
4 Post Adjustable Rack | 24U | 26" to 36" | 19" EIA |
4 Post Adjustable Rack | 45U | 26" to 36" | 19" EIA |
Belkin 4-Post Rack |
Belkin Rack Enclosures | Height | Depth* | Rails | Width* |
Belkin RK4000 | 42U | 30" | 19" EIA | 21" |
Other available open frame racks are below: | ||
| ||
4-Post Server Rack |
4-Post Server Rack | Height | Depth* | Rails | Width* |
7ft. 4 Post Server Rack | 45U | 23" - 36" | 19" EIA | 19" |
4ft. 4 Post Server Rack | 24U | 23" - 36" | 19" EIA | 19" |
4-Post Open Server Racks
4-Post Racks are a low cost option for rack mounting your servers, network, and telecom equipment. Frame options include type of rack mounting holes (square or threaded), and how the frames stand or bold to the floor. After selecting the ideal frame, you can then configure your 4-post rack with accessories including shelves, cable management, and rack power strips.
Which is the best 4-Post Open Server Rack for me?
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White |
Rittal TS-IT 40"D Server Cabinets |
3-Day Express Program - configurable options |
RittalXpress TS-IT Enclosure Series | ||||
Part Number | Height | Width | Depth | Description |
792441-FSSB | 42U | 24" | 41" | Front Door - Perforated, locking Rear Door - Perforated split, locking Side Panels - Solid split, locking Top - Solid with Cable Slots Includes - Leveling Feet, Hardware |
792841-FSSB | 42U | 28" | 41" | |
793241-FSSB | 42U | 32" | 41" | |
872441-FSSB | 48U | 24" | 41" | |
872841-FSSB | 48U | 28" | 41" | |
873241-FSSB | 48U | 32" | 41" | |
TS IT Rack Accessories |
NetClosure 40"D Server Racks |
NetClosure Rack Enclosures | Height | Depth* | Rails | Width* |
NetClosure NC151-3500 | 16U | 40" | 19" EIA | 24" |
NetClosure NC151-3501 | 16U | 40" | 19" EIA | 24" |
Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776.
When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
40" & 42" are the most common server rack depths for data centers & server rooms. |
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
]]>Great Lakes 42"D ES-Series EnclosuresDesigned for servers, high density, Cisco equipment, and hot / cold aisle containment |
Great Lakes ES-Series | Height | Depth | Rails | Width |
Great Lakes GL480ES-2442MS | 24U | 42" | 19" EIA | 24" |
Great Lakes GL790ES-2442MS | 42U | 42" | 19" EIA | 24" |
Great Lakes GL790ES-2442MSS | 42U | 42" | 19" EIA | 24" |
Great Lakes GL790ES-2442MSFS | 42U | 42" | 19" EIA | 24" |
Great Lakes GL790ES-3042MS | 42U | 42" | 19" EIA | 30" |
Great Lakes GL790ES-3042MSS | 42U | 42" | 19" EIA | 30" |
Great Lakes GL790ES-3042MSFS | 42U | 42" | 19" EIA | 30" |
Great Lakes GL840ES-2442MS | 44U | 42" | 19" EIA | 24" |
Great Lakes GL8401ES-2442 | 44U | 42" | 19" EIA | 24" |
Great Lakes GL910ES-2442MS | 48U | 42" | 19" EIA | 24" |
Great Lakes GL910ES-2442MSS | 48U | 42" | 19" EIA | 24" |
Great Lakes GL910ES-3042MS | 48U | 42" | 19" EIA | 30" |
Great Lakes GL910ES-3042MSS | 48U | 42" | 19" EIA | 30" |
Base Model: no doors or sides.
MS: mesh contour front and rear doors
MSS: mesh contour front door and split mesh rear door
MSFS: mesh contour front door and split fan rear door
Great Lakes 42"D EN-Series EnclosuresEnhanced Network Series is designed for high density cable, Cisco equipment, and hot / cold aisle containment |
Great Lakes EN-Series | Height | Depth | Rails | Width |
Great Lakes GL780ENT-3242-FK | 42U | 42" | 19" EIA | 32" |
Great Lakes GL780ENT-3242MSS-NS | 42U | 42" | 19" EIA | 32" |
Great Lakes GL780ENT-3242MSS | 42U | 42" | 19" EIA | 32" |
Great Lakes GL780ENT-4042-FK | 42U | 42" | 19" EIA | 40" |
Great Lakes GL780ENT-4042SSS-NS | 42U | 42" | 19" EIA | 40" |
Great Lakes GL780ENT-4042SSS | 42U | 42" | 19" EIA | 40" |
Great Lakes GL840ENT-3242-FK | 45U | 42" | 19" EIA | 32" |
Great Lakes GL840ENT-3242MSS-NS | 45U | 42" | 19" EIA | 32" |
Great Lakes GL840ENT-3242MSS | 45U | 42" | 19" EIA | 32" |
Great Lakes GL840ENT-4042-FK | 45U | 42" | 19" EIA | 40" |
Great Lakes GL840ENT-4042SSS-NS | 45U | 42" | 19" EIA | 40" |
Great Lakes GL840ENT-4042SSS | 45U | 42" | 19" EIA | 40" |
Great Lakes GL910ENT-3242-FK | 48U | 42" | 19" EIA | 32" |
Great Lakes GL910ENT-3242MSS-NS | 48U | 42" | 19" EIA | 32" |
Great Lakes GL910ENT-3242MSS | 48U | 42" | 19" EIA | 32" |
Great Lakes GL910ENT-4042-FK | 48U | 42" | 19" EIA | 40" |
Great Lakes GL910ENT-4042SSS-NS | 48U | 42" | 19" EIA | 40" |
Great Lakes GL910ENT-4042SSS | 48U | 42" | 19" EIA | 40" |
Cisco Nexus & Catalyst / Side Airflow Equipment Baffle Kits |
FK: no doors or sides.
NS: Solid Top, Mesh Front & Split Rear, No Sides
SSS: Solid Top & Sides, Mesh Front & Rear
MSS: Solid Top & Sides, Mesh Front & Split Rear
Great Lakes 42"D NEMA 12 EnclosuresDust & Water Resistant Racks |
Great Lakes NEMA 12 Series | Height | Depth | Rails | Width |
Great Lakes GL840N12-2442-SS | 45U | 42" | 19" EIA | 24" |
Great Lakes GL840N12-3042-SS | 45U | 42" | 19" EIA | 30" |
Great Lakes GL840N12-2442-SA - 2500 to 6000 BTU AC Unit | 45U | 42" | 19" EIA | 24" |
Great Lakes GL840N12-3042-SA - 2500 to 6000 BTU AC Unit | 45U | 42" | 19" EIA | 30" |
Great Lakes GL840N12-2442-SB - 8000 to 12,000 BTU AC Unit | 45U | 42" | 19" EIA | 24" |
Great Lakes GL840N12-3042-SB - 8000 to 12,000 BTU AC Unit | 45U | 42" | 19" EIA | 30" |
Great Lakes 42"D Seismic Enclosures(Zone 4, NEBS GR-63-CORE compliant) |
Great Lakes EZ Series | Height | Depth | Rails | Width |
Great Lakes GL840EZ-3042 | 45U | 42" | 19" EIA | 30" |
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White |
Rittal TS-IT 41"D Server Cabinets |
3-Day Express Program - configurable options |
RittalXpress TS-IT Enclosure Series | ||||
Part Number | Height | Width | Depth | Description |
792441-FSSB | 42U | 24" | 41" | Front Door - Perforated, locking Rear Door - Perforated split, locking Side Panels - Solid split, locking Top - Solid with Cable Slots Includes - Leveling Feet, Hardware |
792841-FSSB | 42U | 28" | 41" | |
793241-FSSB | 42U | 32" | 41" | |
872441-FSSB | 48U | 24" | 41" | |
872841-FSSB | 48U | 28" | 41" | |
873241-FSSB | 48U | 32" | 41" | |
TS IT Rack Accessories |
Which is the best 40U Rack for me? Being a standard rack height, you may also want to consider 42U Server Racks. With a few less rack units, also worth noting are 37U Server Racks. * For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page. ]]>]]>
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun. ]]>
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun. ]]>
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.]]>
The HH Server Racks, are configured to be compatible with most network equipment and computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.]]> We do not currently offer 41U racks online. If a 41U rack is right for you, please contact our Sales Representatives for assistance. Alternatively you may want to consider 40U or 42U Server Racks. Which is the best 41U Rack for me? * For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page. ]]>Which is the best 42" Depth Rack for me?Comparing racks can be a daunting task. Even comparing racks with similar dimensions can be like comparing apples to oranges. In addition to your dimensions requirements, please also take into consideration the rack's cooling capabilities and cooling options, compatibility, load capacity, cable management options, rack accessories, rail mounting, and overall rack expandability. For additional help, please contact our expert sales engineers at 1-866-722-5776. When selecting the depth of your Server Rack you will want to keep in mind what the deepest piece of equipment you will be putting in it, and then leave a couple of inches behind it for running your cables and power cords. Also please keep in mind that the Usable Rack Depth "rail-to-rail" is typically 2" less then the Actual Rack Depth. Depending on your application, requirements, and space limitations, it may be prudent to go with a slightly deeper server rack to account for both the depth of the latest servers and blades sold as well as providing enough additional room for cable management, power strips and power cords.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page. ]]>
Base Model: no doors or sides.
FK: no doors or sides.
Eaton 43"D RS-Series Server Racks
Includes: Installation guide APC ACAC10021 Features:
Specifications:
Includes: Installation guide APC ACCS1000 Features:
APC ACCS1000 Specifications:
Standard Lead Time: Usually Ships within 2 Weeks ]]>NOTE: Rack air containment rear assembly only, server rack sold separately. APC ACCS1001 Features:
Specifications:
APC ACCS1002 Specifications:
NOTE: Rack air containment front assembly only, server rack sold separately. APC ACCS1003 Features:
Specifications:
Includes: Installation guide APC ACCS1004 Specifications:
NOTE: Rack air containment front assembly only, server rack sold separately. APC ACCS1005 Features:
Specifications:
Includes: Installation guide APC ACCS1006 Specifications:
Includes: Installation guide APC ACCS1007 Specifications:
The Rack Air Distribution Unit minimizes temperature differences between the top and bottom of the enclosure. It also prevents hot exhaust air from recirculating to the inlet of the enclosure. The product is recommended for rack enclosures with loads greater than 1.5kW and can provide airflow for loads up to 3.5kW. It is also ideal for enclosures in raised floor environments where underfloor air distribution is inadequate. ]]>Physical | Net weight | 0.65 lbs. ( 0.30 kg ) | Maximum height | 1.75 inches ( 4.45 cm ) | Maximum width | 11.50 inches ( 29.21 cm ) | Maximum depth | 19.60 inches ( 49.78 cm ) | Shipping Weight | 2.60 lbs. ( 1.18 kg ) | Shipping Height | 6 inches ( 15 cm ) | Shipping Width | 11.75 inches ( 29.84 cm ) | Shipping Depth | 20.25 inches ( 51.44 cm ) | APC ACF002 Features:
Specifications:
Includes: Installation guide APC ACF126 Features:
APC ACF126 Specifications:
Includes: Installation guide, Rack Mounting brackets, User Manual APC ACF201BLK Features:
Includes: Installation guide, Rack Mounting brackets, User Manual APC ACF202BLK Features:
]]> Includes: Installation guide APC ACF310 Specifications:
General | |
| Physical | |
| Conformance | |
|
Includes: Grommets, Installation Guide, Qty 1 - IEC to NEMA 5-15P Power Cord, Qty 4 - Fans
APC ACF501 Features:
APC ACF502 Features:
APC Roof Fan Tray Installation Image
Specifications:
Mechanical | |
Height | 2.36 in. (60 mm.) |
Width | 28.50 in. (724 mm.) |
Depth | 35.16 in. (893 mm.) |
Weight | 22.50 lbs. (10.24 kg.) |
Color | Black |
Environmental | |
Audible noise at 1 meter from surface of unit | 51.00 dBA |
General | |
Air Flow | 440 CFM |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Input Connections | NEMA 5-15P |
Conformance | |
Regulatory Approvals | CSA C22.2 No. 60950,PSE,UL 60950 |
Environmental Compliance | RoHS |
APC Roof Fan Tray Features:
APC Roof Fan Tray Application Example
Mechanical | |
Height | 2.36 in. (60 mm.) |
Width | 28.50 in. (724 mm.) |
Depth | 35.16 in. (893 mm.) |
Weight | 22.50 lbs. (10.23 kg.) |
Color | Black |
Environmental | |
Audible noise at 1 meter from surface of unit | 62.00 dBA |
General | |
Air Flow | 440 CFM |
Input | |
Nominal Input Voltage | 208V,230V |
Input Frequency | 50/60 Hz |
Input Connections | British BS1363A IEC-320 C14 Schuko CEE 7/7P |
Conformance | |
Regulatory Approvals | CSA C22.2 No. 60950,PSE,UL 60950 |
Environmental Compliance | RoHS |
APC Roof Fan Tray Features:
APC Roof Fan Tray Application Example
The APC NetworkAIR ACPA4000 is a portable, compact air conditioner designed for spot-cooling, emergency-cooling, and after-hours cooling of server closets, data centers, conference rooms, home offices, or rooms that house heat-sensitive equipment. The ACPA4000 provides 3.8 kwh (13000 BTU/hour) of cooling power. It automatically adjusts room temperature and reduces moisture while filtering the air.
NetworkAIR PA4000 Features:
APC ACPA4000 Specifications:
The APC ACPA4000RF is a replacement filter for the APC NetworkAIR PA4000 air conditioning solution.
Dimensions: 16"H x 16"W x 2"D
]]>APC ACPSC2000 Specifications:
Mechanical | |
Height | 33.07 in. (840 mm.) |
Width | 17.72 in. (450 mm.) |
Depth | 14.57 in. (370 mm.) |
Weight | 68.00 lbs. (30.91 kgs.) |
Cooling Type | Air-cooled Self-contained |
Nominal Cooling Capacity | 2.90 kW |
Coolant | R410A |
General | |
Dehumidification Capacity | 2.46 lbs/hour (1.12 kg/hour) |
Refrigerant Charge | 1.19 pounds (0.54 kg.) |
Air Flow | 220.0 CFM (103.82 lps) |
Input | |
Number of Power Cords | 1 |
Nominal Input Voltage | 120 |
Input Power | 1170 Watts |
Input Frequency | 60 Hz |
Input Connections | NEMA 5-15P |
Communication & Management | |
Control panel | Multi-function LCD status and control console |
Environmental | Audible noise at 1 meter from surface 55.00 dBA of unit |
Conformance | |
Regulatory Approvals | CE, UL Listed |
The APC ACPSC2000 is an InRoom SC Portable 2.9 kW 120V 60Hz Portable Cooler. These coolers are great for small data rooms and closets.
APC ACPSC2000 Features:
Mechanical | |
Height | 33.07 in. (840.00 mm.) |
Width | 17.71 in. (450.00 mm.) |
Depth | 14.56 in. (370.00 mm.) |
Net Weight | 73.15 lbs. (33.18 kg.) |
Shipping Weight | 92.19 lbs.(41.82 kg.) |
Shipping Height | 50 in. (1270.00 mm.) |
Shipping Width | 25 in. (635.00 mm.) |
Shipping Depth | 20 in. (508.00 mm.) |
Color | Black |
Cooling Type | Air-cooled Self-contained |
Normal Cooling Capacity | 3.50 kW |
Coolant | R410A |
General | |
Dehumidification Capacity | 1.32 kg/hour |
Refrigerant Charge | 0.0 |
KG Air Flow | 99.1 lps |
Input | |
Number of Power Cords | 1 |
Nominal Input Voltage | 120 |
Input Power | 1560 Watts |
Input Frequency | 60 Hz |
Input Connections | NEMA 5-15P |
Communications | Multi-function LCD status and control console |
Environmental | Audible noise at 1 meter from surface of unit 55.00 dBA |
Standards | |
Approved Agency | CE,UL Listed |
Standard Warranty | 1 year repair or replace |
The APC ACPSC3500 InRoom SC cooling unit is a portable, compact air conditioner designed for spot-cooling, emergencycooling, and after-hours cooling of server closets, and data centers.
Standard Lead Time: Usually in Stock
The APC ACPSC3500 Features:
APC ACPSC3500 Back View
Mechanical | |
Height | 78.40 in. (1991 mm.) |
Width | 11.80 in. (300 mm.) |
Depth | 42.10 in. (1069 mm.) |
Weight | 365.00 lbs. (165.92 kg.) |
Color | Black |
Environmental | |
Storage Temperature | 32 - 104 °F (0 - 40 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-15000 feet (0-4500 meters) |
Audible noise at 1 meter from surface of unit | 80.00 dBA |
General | |
Cooling Capacity Options | 5.30 kW |
Cooling Options | Air |
Compressor Type | Rotary |
Air Discharge Patterns | Horizontal |
Intake Air | Rear Return |
Refrigerant | R410A |
Refrigerant Charge | 3 pounds |
Air Flow | 1200 CFM |
Condensate Pump Capacity | 1.30 gal/hour |
Amp Draw Nominal | 16A |
Amp Draw In-Rush | 56 |
Input | |
Input Power | 2940 Watts |
Input Frequency | 60 Hz |
Rack Height | 42U |
Input Connections | NEMA L6-20P |
Communications & Management | |
Control panel | Multi-function LCD status and control console |
Conformance | |
Regulatory Approvals | BSMI,EN 55022 Class A,FCC Part 15 Class A,ICES-003,UL Listed,VCCI,VDE |
The APC InRow SC ACSC100 is a 200-240V 60HZ rapidly deployable, self-contained row-based cooling solutions for server rooms and wiring closets.
Includes: Exhaust duct kit, Installation guide, Operations and maintenance manual
Standard Lead Time: Usually ships within 2 weeks
APC ACSC100 Features:
APC ACSC100 Energy Use/Efficiency Diagram
Curve fit to measured loss data inclusive of condenser power. Loss is expressed as a percentage of full rated capacity. All measurements taken in cooling only operating mode with nominal electrical input. Supply air temperature set point: 64 °F (18 °C). Return air temperatures: 85 °F (29 °C) dry bulb; 65 °F (18 °C) wet bulb. Condenser ambient air temperature: 80 °F (27 °C). Operation below 45% of rated capacity is not recommended.
]]>
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
|
The APC AP5012 is a bracket used to mount one APC Rack LCD Monitor Keyboard Mouse (AP5015, AP5017) in a SUN server rack.
Includes: Installation guide, Rack Mounting Brackets
Specifications:
APC's NetworkAIR 1000 is a portable, compact, airconditioner designed for spot-cooling, emergency-cooling, and after-hours cooling of server closets, data centers, conference rooms, home offices, or rooms housing heat-sensitive equipment. The NetworkAIR 1000 provides 7,200 BTU of cooling power. It automatically adjusts room temperature, and reduces moisture while filtering the air.
NetworkAIR 1000 Features:
APC AP7003 Specifications:
Mechanical | |
Height | 0.25 in. (6 mm.) |
Width | 2.50 in. (64 mm.) |
Depth | 2.63 in. (67 mm.) |
Weight | 0.25 lbs. (0.11 kg.) |
Color | Black |
APC AP7400 Features:
The APC AP7404 is a Cord retention bracket and vertical-mount bracket kits to complete rack power distribution solutions.
Includes: Mounting Hardware, Rack Mounting brackets
Features:
Specifications:
Mechanical | |
Height | 2.75 in. (70 mm.) |
Width | 4.50 in. (114 mm.) |
Depth | 0.75 in. (19 mm.) |
Weight | 0.90 lbs. (0.41 kg.) |
Color | Black |
Conformance | |
Environmental Compliance | RoHS |
Mechanical | |
Height | 1.72 inches (44 mm) |
Width | 17.20 inches (437 mm) |
Depth | 10.00 inches (254 mm) |
Weight | 17.56 lbs. (7.98 kg) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 200V,208V |
Maximum Total Current Draw per Phase | 40A |
Output Connections | (6) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 40A |
Input Connections | CS8365 |
Cord Length | 8 feet (2.44 meters) |
Maximum Input Current per phase | 50A |
Conformance | |
Regulatory Approvals | cUL Listed, CSA C22.2 No. 60950-1-03,METI Denan, UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Includes: Installation guide, Rack Mounting brackets
APC AP7516 Features:
Mechanical | |
Height | 63.75 inches (1619 mm) |
Width | 2.19 inches (56 mm) |
Depth | 1.73 inches (44 mm) |
Weight | 12.25 lbs. (5.57 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 24A |
Output Connections | (24) NEMA 5-20R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L5-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Load Capacity | 2880 VA |
Conformance | |
Regulatory Approvals | cUL Listed, CSA C22.2 No. 60950-1-03,UL 60950-1,UL Listed |
Environmental Compliance | RoHS |
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7532 Features:
Mechanical | |
Height | 63.75 in. (1619 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 12.25 lbs. (5.57 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 200V,208V |
Maximum Total Current Draw per Phase | 24A |
Output Connections | (20) IEC 320 C13 (4) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L6-30P |
Cord Length | 10 ft. (3.05 m.) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Load Capacity | 4992 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,METI Denan,UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7541 Features:
Mechanical | |
Height | 36.50 inches (927 mm) |
Width | 2.16 inches (55 mm) |
Depth | 3.46 inches (88 mm) |
Weight | 15.95 lbs. (7.25 kg) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (3) IEC 320 C13 (6) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 47 - 63 Hz |
Regulatory Derated Input Current (North America) | 40A |
Input Connections | CS8365 |
Cord Length | 6 ft. (1.83 m.) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 40A |
Maximum Input Current per phase | 50A |
Conformance | |
Regulatory Approvals | cUL Listed, CSA C22.2 No. 60950-1-03,METI Denan, UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7567 is a Rack PDU, Basic, Zero U, 14.4kW, 208 V, (6) C19 & (3) C13. APC Basic Rack PDU , Input: 208V 3PH , Input Connections: CS8365 , Cord Length: 6 feet ( 1.83 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19.
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7567 Features:
Mechanical | |
Height | 70.00 inches (1778 mm) |
Width | 2.20 inches (56 mm) |
Depth | 3.50 inches (89 mm) |
Weight | 15.28 lbs. (6.95 kg) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 35A |
Output Connections | (30) IEC 320 C13 (6) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Input Connections | CS8365 |
Cord Length | 3 ft. (0.91 m.) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 35A |
Maximum Input Current per phase | 35A |
Load Capacity | 12.5 kVA |
Conformance | |
Regulatory Approvals | cUL Listed, CSA C22.2 No. 60950-1-03,METI Denan, UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7568 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.76 in. (95 mm.) |
Weight | 16.10 lbs. (7.32 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V 3PH |
Maximum Total Current Draw per Phase | 40A |
Output Connections | (24) IEC 320 C13 (4) IEC 320 C19 (2) NEMA L6-30R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 40A |
Input Connections | CS8365 |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 50A |
Load Capacity | 14.4 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,METI Denan,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7569 Features:
Features:
Features:
Features:
Features:
Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 12.25 lbs. (5.57 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (42) NEMA 5-20R |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed, CSA C22.2 No. 60950-1-03,UL 60950-1,UL Listed |
Environmental Compliance | RoHS |
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7592 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.50 inches (89 mm) |
Weight | 19.33 lbs. (8.79 kg) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 35A |
Output Connections | (30) IEC 320 C13 (6) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Input Connections | CS8365 |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 35A |
Maximum Input Current per phase | 35A |
Load Capacity | 12.5 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7598 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.75 inches (95 mm) |
Weight | 21.70 lbs. (9.86 kg) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 40A |
Output Connections | (24) IEC 320 C13 (4) IEC 320 C19 (2) NEMA L6-30R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 40A |
Input Connections | CS8365 |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 50A |
Load Capacity | 14.4 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,METI Denan,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7599 Features:
Mechanical | |
Height | 1.75 in. (44 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 12.00 in. (305 mm.) |
Weight | 15.00 lbs. (6.82 kg.) |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V 3PH |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (1) NEMA L21-20 |
Overload Protection | Yes |
Cord Length | 3 ft (0.91 meters) |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 2 |
Acceptable Input Voltage | 100-120 VAC |
Maximum Input Current per phase | 20A |
Conformance | |
Regulatory Approvals | cUL Listed,FCC Part 15 Class A,METI Denan,UL Listed,VCCI |
The APC AP7701 is a Rack-mount Transfer Switch, Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 3 feet ( 0.91 meters ) , Output: 208V 3PH , Output Connections: NEMA L21-20.
Includes: Rack Mounting brackets
APC AP7701 Features:
Mechanical | |
Height | 1.72 in. (44 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 9.00 in. (229 mm.) |
Weight | 11.06 lbs. (5.02 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (8) IEC 320 C13 (1) IEC 320 C19 |
Always on Outlets | 9 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 47 - 63 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L6-20P |
Cord Length | 8 feet (2.44 meters) |
Number of Power Cords | 2 |
Maximum Line Current per phase | 20A |
Maximum Input Current per phase | 20A |
Conformance | |
Regulatory Approvals | EN 55022 Class A,FCC Part 15 Class A |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7730 is a Rack-mount Transfer Switches , Input: 208V , Input Connections: NEMA L6-20P , Cord Length: 8 feet ( 2.44 meters ) , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable, Warranty card
Standard Lead Time: Usually Ships within 8 Weeks
APC AP7730 Features:
Mechanical | |
Height | 1.75 in. (44 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 9.00 in. (229 mm.) |
Weight | 9.75 lbs. (4.43 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 100V,120V |
Maximum Total Current Draw per Phase | 15A |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 12A |
Input Connections | NEMA 5-15P |
Cord Length | 8 feet (2.44 meters) |
Number of Power Cords | 2 |
Acceptable Input Voltage | 100-125 VAC |
Maximum Input Current per phase | 15A |
Load Capacity | 1440 VA |
Conformance | |
Regulatory Approvals | cUL Listed,FCC Part 15 Class A,UL Listed,VCCI |
Environmental Compliance | RoHS 7b Exemption |
AP7750 is a Rack-mount Transfer Switches , Input: 120V , Input Connections: NEMA 5-15P , Cord Length: 8 feet ( 2.44 meters ) , Output: 100V, 120V , Output Connections: NEMA 5-15R
Includes: Rack Mounting brackets, User Manual
APC AP7750 Features:
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
|
The APC AP7750A is the replacement for the AP7750. This unit is a Rack-mount Transfer Switch, Input: 120V , Input Connections: L5-15P , Cord Length: 8 feet ( 2.44 meters ) , Output: 100V, 120V , Output Connections: NEMA 5-15R
Mechanical | |
Height | 1.72 in. (44 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 9.00 in. (229 mm.) |
Weight | 10.95 lbs. (4.98 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (10) NEMA 5-20R |
Always on Outlets | 10 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 47 - 63 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L5-20P |
Cord Length | 8 feet (2.44 meters) |
Maximum Line Current per phase | 20A |
Maximum Input Current per phase | 20A |
Conformance | |
Regulatory Approvals | EN 55022 Class A,FCC Part 15 Class A |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7752 is a Rack-mount Transfer Switches , Input: 120V , Input Connections: NEMA L5-20P , Cord Length: 8 feet ( 2.44 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable, Warranty card
Standard Lead Time: Usually Ships within 8 Weeks
APC AP7752 Features:
Mechanical | |
Height | 1.69 in. (43 mm.) |
Width | 20.44 in. (519 mm.) |
Depth | 0.94 in. (24 mm.) |
Weight | 2.20 lbs. (1.00 kg.) |
Color | Black |
Includes: Installation guide
]]>
Mechanical | |
Height | 1.56 in. (40 mm.) |
Width | 16.88 in. (429 mm.) |
Depth | 3.18 in. (81 mm.) |
Weight | 0.55 lbs. (0.25 kg.) |
Color | Black |
Includes: Installation guide
]]>
Mechanical | |
Height | 1.74 in. (44 mm.) |
Width | 17.47 in. (444 mm.) |
Depth | 4.03 in. (102 mm.) |
Weight | 3.80 lbs. (1.73 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 12A |
Output Connections | (8) NEMA 5-15R |
Overload Protection | No |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 12A |
Input Connections | NEMA 5-15P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 1440A |
Maximum Input Current per phase | 15A |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,METI Denan,UL 60950,UL Listed,VCCI |
Environmental Compliance | RoHS 7b Exemption |
Formerly the AP7800
]]>APC AP7800 Features:
Mechanical | |
Height | 1.74 in. (44 mm.) |
Width | 17.47 in. (444 mm.) |
Depth | 4.03 in. (102 mm.) |
Weight | 3.80 lbs. (1.73 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (8) NEMA 5-20R |
Overload Protection | No |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L5-20P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 1920VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,UL 60950,UL Listed |
Environmental Compliance | RoHS |
Formerly the AP7801
]]>The APC AP7801B is a Metered Rack PDU , Input: 120V , Input Connections: NEMA L5-20P , Cord Length: 12 feet ( 3.66 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Cord retention bracket(s), Installation guide, Rack Mounting brackets, User Manual
APC AP7801 Features:
Mechanical | |
Height | 3.48 in. (88 mm.) |
Width | 17.47 in. (444 mm.) |
Depth | 4.41 in. (112 mm.) |
Weight | 7.40 lbs. (3.36 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 24A |
Output Connections | (16) NEMA 5-20R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L5-30P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Load Capacity | 2880 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,UL 60950,UL Listed |
Environmental Compliance | RoHS |
APC AP7802B Features:
Mechanical | |
Height | 3.48 in. (88 mm.) |
Width | 17.47 in. (444 mm.) |
Depth | 4.42 in. (112 mm.) |
Weight | 7.40 lbs. (3.36 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 24A |
Output Connections | (12) IEC 320 C13 (4) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L6-30P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Formerly the AP7811
]]>APC AP7811B Features:
Mechanical | |
Height | 1.74 in. (44 mm.) |
Width | 17.47 in. (444 mm.) |
Depth | 4.03 in. (102 mm.) |
Weight | 3.80 lbs. (1.73 kg.) |
U Height | 1U |
Input | |
Nominal Input Voltage | 230V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 10A |
Input Connections | IEC-320 C14 |
Maximum Input Current per phase | 15A |
Load Capacity | 2300 VA |
Output | |
Nominal Output Voltage | 208V, 230V |
Maximum Total Current Draw per Phase | 10A |
Different voltages and corresponding amperages | 10A @ 230V, 12A @ 208V |
Output Connections | (8) IEC 320 C13 |
Environmental | |
Operating Environment | 23-113°F (-5-45°C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13-149°F (-25-65°C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Conformance | |
Regulatory Approvals | cUL Listed,C-tick, CE, CSA, FCC Part 15 Class A, GOST, UL 60950, UL Listed, VDE, VCCI |
Environmental Compliance | RoHS |
APC Switched Rack PDU Features:
Availability
Agility
The APC AP7820 is a Metered Rack PDU, Input: 230V, Input Connections: IEC-320 C14, Output: 208V, 230V, Output Connections: IEC 320 C13.
Includes: Cord retention bracket(s), Installation guide, Rack Mounting brackets, User Manual
APC AP7820 Features:
Mechanical | |
Height | 1.74 in. (44 mm.) |
Width | 17.47 in. (444 mm.) |
Depth | 4.03 in. (102 mm.) |
Weight | 3.80 lbs. (1.73 kg.) |
U Height | 1U |
Input | |
Nominal Input Voltage | 230V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | IEC-320 C20 |
Maximum Input Current per phase | 20A |
Output | |
Nominal Output Voltage | 208V, 230V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (8) IEC 320 C13 |
Environmental | |
Operating Environment | 23-113°F (-5-45°C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13-149°F (-25-65°C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Conformance | |
Regulatory Approvals | cUL Listed,C-tick, CE, CSA, FCC Part 15 Class A, GOST, UL 60950, UL Listed, VDE, VCCI |
Environmental Compliance | RoHS |
APC Switched Rack PDU Features:
Availability
Agility
Formerly the AP7821
]]>Includes: Cord retention bracket(s), Installation guide, Rack Mounting brackets, User Manual
APC AP7821 Features:
APC AP7823 Metered Rack PDU
Input: 30A - 200, 208, 240
Input Connections: NEMA L14-30P
Cord Length: 12 feet ( 3.66 meters )
Output Connections: (8) C13 & (8) 5-20R
Output: 120, 208V
Mounting: 2U Horizontal
Includes: Cord retention bracket(s), Installation guide, Rack Mounting brackets, User Manual
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>Mechanical | |
Height | 63.75 in. (1619 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 12.50 lbs. (5.68 kg.) |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 24A |
Output Connections | (24) NEMA 5-20R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L5-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Load Capacity | 2880 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL 60950-1 |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7832 is a Metered Rack PDU , Input: 120V , Input Connections: NEMA L5-30P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7832 Features:
Mechanical | |
Height | 63.76 in. (1619 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 1.74 in. (44 mm.) |
Weight | 12.50 lbs. (5.68 kg.) |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 200V, 208V |
Maximum Total Current Draw per Phase | 30A |
Output Connections | (20) IEC 320 C13 (4) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L6-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Load Capacity | 4992 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950-1,UL Listed,VCCI Class A,VCCI |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7841 is a Metered Rack PDU , Input: 208V , Input Connections: NEMA L6-30P , Cord Length: 10 feet ( 3.05 meters ) , Output: 200V, 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7841 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 1.74 in. (44 mm.) |
Weight | 12.00 lbs. (5.46 kg.) |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (42) NEMA 5-20R |
Always on Outlets | 42 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed,cUL Recognized,CSA C22.2 No. 42,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,UL 60950-1,UL Listed |
The APC AP7862 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 3 feet ( 0.91 meters ) , Output: 120V , Output Connections: NEMA 5-20R.
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7862 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 12.00 lbs. (5.45 kg.) |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V, 208V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (21) NEMA 5-20R (6) NEMA L6-20R |
Always on Outlets | 21 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7863 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 3 feet ( 0.91 meters ) , Output: 120V, 208V , Output Connections: NEMA 5-20R,NEMA L6-20R
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7863 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 12.00 lbs. (5.45 kg.) |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (36) IEC 320 C13 (6) IEC 320 C19 |
Always on Outlets | 42 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950-1,UL Listed,VCCI |
The APC AP7864 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 3 feet ( 0.91 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7864 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 2.87 in. (73 mm.) |
Weight | 20.45 lbs. (9.30 kg.) |
Environmental | |
Operating Environment | 23 - 140 °F (-5 - 60 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 45A |
Output Connections | (3) IEC 320 C13 (12) IEC 320 C19 |
Always on Outlets | 15 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 45A |
Input Connections | IEC 309 60A 3P+PE |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 45A |
Maximum Input Current per phase | 60A |
Load Capacity | 16.2 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950-1,UL Listed,VCCI Class A |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7866 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: IEC 309 60A 3P+PE , Cord Length: 3 feet ( 0.91 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19.
Includes: Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable, Warranty card
APC AP7866 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 2.87 in. (73 mm.) |
Weight | 20.45 lbs. (9.30 kg.) |
Environmental | |
Operating Environment | 23 - 140 °F (-5 - 60 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -4 - 149 °F (-20 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 45A |
Output Connections | (3) IEC 320 C13 (12) IEC 320 C19 |
Always on Outlets | 15 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 45A |
Input Connections | IEC 309 60A 3P+PE |
Cord Length | 6 feet (1.83 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 45A |
Maximum Input Current per phase | 60A |
Load Capacity | 16.2 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950-1,UL Listed,VCCI Class A |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7866A is a Metered Rack PDU , Input: 208V 3PH , Input Connections: IEC 309 60A 3P+PE , Cord Length: 6 feet ( 1.83 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable, Warranty card
APC AP7866A Features:
Mechanical | |
Height | 36.50 in. (927 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.50 in. (89 mm.) |
Weight | 18.00 lbs. (8.18 kg.) |
Environmental | |
Operating Environment | 23 - 140 °F (-5 - 60 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 40A |
Output Connections | (6) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 40A |
Input Connections | CS8365 |
Cord Length | 6 feet (1.83 meters) |
Maximum Line Current per phase | 40A |
Maximum Input Current per phase | 50A |
Load Capacity | 14.4 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950-1,UL Listed,VCCI |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7867A is a Metered Rack PDU , Input: 208V 3PH , Input Connections: IEC 309 60A 3P+PE , Cord Length: 6 feet ( 1.83 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable, Warranty card
APC AP7867A Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.50 in. (89 mm.) |
Weight | 15.83 lbs. (7.20 kg.) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 35A |
Output Connections | 30) IEC 320 C13 (6) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Input Connections | CS8365 |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 35A |
Maximum Input Current per phase | 35A |
Load Capacity | 12.5 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7868 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: CS8365 , Cord Length: 3 feet ( 0.91 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable, Toolless Mounting Kit
APC AP7868 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.76 in. (95 mm.) |
Weight | 22.80 lbs. (10.36 kg.) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 40A |
Output Connections | (24) IEC 320 C13 (4) IEC 320 C19 (2) NEMA L6-30R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 40A |
Input Connections | CS8365 |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 50A |
Load Capacity | 14.4 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Formerly the AP7869
]]>APC AP7869 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 1.74 in. (44 mm.) |
Weight | 12.50 lbs. (5.68 kg) |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (42) NEMA 5-20R |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 100-125/200-250 VAC |
Maximum Input Current per phase | 20A |
Load Capacity | 5770 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950-1,UL Listed |
The APC AP7892 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, Toolless Mounting Kit
APC AP7892 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 1.74 in. (44 mm.) |
Weight | 12.00 lbs. (5.46 kg) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (36) IEC 320 C13 (6) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5770 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950-1,UL Listed |
The APC AP7894 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 10 feet ( 3.05 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Cord retention bracket(s), Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7894 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.50 in. (89 mm.) |
Weight | 19.88 lbs. (9.04 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 35A |
Output Connections | (30) IEC 320 C13 (6) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Input Connections | CS8365 |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 35A |
Maximum Input Current per phase | 35A |
Load Capacity | 12.5 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA C22.2 No. 60950-1-03,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950-1,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7898 is a Metered Rack PDU , Input: 208V 3PH , Input Connections: CS8365 , Cord Length: 10 feet ( 3.05 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Cord retention bracket(s), Documentation CD, Installation guide, Rack Mounting brackets, RS-232 configuration cable, Toolless Mounting Kit
APC AP7898 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.75 in. (95 mm.) |
Weight | 22.80 lbs. (10.36 kg) |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 40A |
Output Connections | (24) IEC 320 C13 (4) IEC 320 C19 (2) NEMA L6-30R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 40A |
Input Connections | CS8365 |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 50A |
Load Capacity | 14.4 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Formerly the AP7899
]]>APC AP7899 Features:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 4.25 in. (108 mm.) |
Weight | 5.00 lbs. (2.27 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 15A |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 12A |
Input Connections | NEMA 5-15P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 15A |
Load Capacity | 1440 VA |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, UL Listed |
Environmental Compliance | RoHS compliant, REACH: Contains No SVHCs |
Formerly known as the AP7900
]]>APC AP7900B Features:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 4.25 in. (108 mm.) |
Weight | 5.00 lbs. (2.27 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (8) NEMA 5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA 5-20P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 2400 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
this item is the direct replacement for the AP7901 and includes a new Network Management Card with TLS 1.2 security support.
PDU models with part number AP7xxxB have an embedded NMC2, and as such will have a different interface and firmware support from the standard AP7xxx series. AP7xxxB SKU's will use the same NMC firmware as AP8xxxx models, with support for the AP7xxxB starting at v6.4.4. Information regarding the differences between firmware v6.x and APC's older generation v3.x (what the standard AP7xxx units used) can be found here: FA176047. In addition, the AP7xxxB models utilize a command-line driven Serial/Telnet interface, opposed to the menu-driven style of the AP7xxx unit.
]]>Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 4.50 in. (114 mm.) |
Weight | 9.90 lbs. (4.50 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 30A |
Output Connections | (16) NEMA 5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L5-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Load Capacity | 2880 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Formerly The AP7902
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP7911B Features:
Formerly the AP791A
]]>APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 4.25 in. (108 mm.) |
Weight | 5 lbs. (2.27 kg.) |
U Height | 1U |
Color | Black |
Input | |
Nominal Input Voltage | 230V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 12A |
Input Connections | IEC-320 C14 |
Cord Length | 6.5 feet (1.98 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 15A |
Load Capacity | 2300 VA |
Output | |
Nominal Output Voltage | 208V, 230V |
Maximum Total Current Draw per Phase | 10A |
Different voltages and corresponding amperages | 10A @ 230V, 12A @ 208V |
Output Connections | (8) IEC 320 C13 |
Environmental | |
Operating Environment | 32-113°F (0-45°C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13-149°F (-25-65°C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Conformance | |
Regulatory Approvals | cUL Listed,CCC,CE,CSA,EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3-3,GOST,IRAM,MIC,UL 60950,UL Listed,VDE,VCCI |
Environmental Compliance | RoHS 7b Exemption |
APC Switched Rack PDU Features:
Availability
Agility
Includes: Installation guide, Rack Mounting brackets, User Manual
APC AP7920B Features:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 4.25 in. (108 mm.) |
Weight | 5 lbs. (2.27 kg.) |
U Height | 1U |
Color | Black |
Input | |
Nominal Input Voltage | 230V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | IEC-320 C20 |
Cord Length | 8.2 feet (2.50 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 3680 VA |
Output | |
Nominal Output Voltage | 208V, 230V |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (8) IEC 320 C13 |
Environmental | |
Operating Environment | 32-113°F (0-45°C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13-149°F (-25-65°C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Conformance | |
Regulatory Approvals | cUL Listed,CE,CSA,EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3-3,GOST,IRAM,MIC,UL 60950,UL Listed,VDE,VCCI |
Environmental Compliance | RoHS 7b Exemption |
APC Switched Rack PDU Features:
Availability
Agility
This is the direct replacement for the AP7921
]]>Includes: Installation guide, Rack Mounting brackets, User Manual
APC AP7921B Features:
Mechanical | |
Height | 63.75 in. (1619 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 13.00 lbs. (5.91 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (24) NEMA 5-20R |
Always on Outlets | 24 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L5-20P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 100-120 VAC |
Maximum Input Current per phase | 20A |
Load Capacity | 1920 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
The APC AP7930 is a Switched Rack PDU , Input: 120V , Input Connections: NEMA L5-20P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Cord retention bracket(s), Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7930 Features:
Mechanical | |
Height | 49.00 in. (1245 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 9.50 lbs. (4.32 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 15A |
Output Connections | (16) NEMA 5-15R |
Always on Outlets | 16 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 12A |
Input Connections | NEMA 5-15P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 100-120 VAC |
Maximum Input Current per phase | 15A |
Load Capacity | 1440 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950,UL Listed,VCCI |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7931 is a Switched Rack PDU , Input: 120V , Input Connections: NEMA 5-15P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-15R
Includes: Cord retention bracket(s), Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7931 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 16.25 lbs. (7.39 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 30A |
Output Connections | (24) NEMA 5-20R |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L5-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Load Capacity | 2880 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
The APC AP7932 is a Switched Rack PDU , Input: 120V , Input Connections: NEMA L5-30P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7932 Features:
Mechanical | |
Height | 63.75 in. (1619 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 13.00 lbs. (5.91 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 200V,208V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (21) IEC 320 C13 (3) IEC 320 C19 |
Always on Outlets | 24 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L6-20P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 200-250 VAC |
Maximum Input Current per phase | 20A |
Load Capacity | 3328 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950,UL Listed,VCCI |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7940 is a Switched Rack PDU, Input: 208V , Input Connections: NEMA L6-20P , Cord Length: 10 feet ( 3.05 meters ) , Output: 200V, 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Cord retention bracket(s), Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7940 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 16.25 lbs. (7.39 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 200V,208V |
Maximum Total Current Draw per Phase | 30A |
Output Connections | (21) IEC 320 C13 (3) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L6-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 200-240 VAC |
Maximum Input Current per phase | 30A |
Load Capacity | 4992 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950,UL Listed,VCCI |
The APC AP7941 is a Switched Rack PDU , Input: 208V , Input Connections: NEMA L6-30P , Cord Length: 10 feet ( 3.05 meters ) , Output: 200V, 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7941 Features:
Mechanical | |
Height | 63.76 inches (1619 mm) |
Width | 2.20 inches (56 mm) |
Depth | 1.74 inches (44 mm) |
Weight | 13.00 lbs. (5.92 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (24) NEMA 5-20R |
Always on Outlets | 24 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
The APC AP7960 is a Switched Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 3 feet ( 0.91 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7960 Features:
Mechanical | |
Height | 63.75 in. (1619 mm.) |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 13.00 lbs. (5.91 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (21) IEC 320 C13 (3) IEC 320 C19 |
Always on Outlets | 24 |
Overload Protection | No |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,METI Denan,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7961 is a Switched Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 3 feet ( 0.91 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Installation guide, Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7961 Features:
Mechanical | |
Height | 70.00 inches (1778 mm) |
Width | 2.20 inches (56 mm) |
Depth | 3.50 inches (89 mm) |
Weight | 17.78 lbs. (8.08 kg) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 35A |
Output Connections | (21) IEC 320 C13 (3) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Input Connections | CS8365 |
Cord Length | 3 feet (0.91 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 35A |
Maximum Input Current per phase | 35A |
Load Capacity | 12.5 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
Formerly the AP7968
]]>Mechanical | |
Height | 63.75 in. (1619 mm. |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 13.00 lbs. (5.91 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Output Connections | (24) NEMA 5-20R |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
The APC AP7990 is a Switched Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-20R
Includes: Cord retention bracket(s), Rack Mounting brackets, Toolless Mounting Kit, User Manual
APC AP7990 Features:
Mechanical | |
Height | 63.75 in. (1619 mm. |
Width | 2.19 in. (56 mm.) |
Depth | 1.73 in. (44 mm.) |
Weight | 13.00 lbs. (5.91 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (21) IEC 320 C13 (3) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L21-20P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 5700 VA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7991 is a Switched Rack PDU , Input: 208V 3PH , Input Connections: NEMA L21-20P , Cord Length: 10 feet ( 3.05 meters ) , Output: 208V , Output Connections: IEC 320 C13,IEC 320 C19
Includes: Rack Mounting brackets, Toolless Mounting Kit
APC AP7991 Features:
Mechanical | |
Height | 70.00 in. (1778 mm.) |
Width | 2.20 in. (56 mm.) |
Depth | 3.50 in. (89 mm.) |
Weight | 21.28 lbs. (9.67 kg.) |
Color | Black |
Environmental | |
Operating Environment | 23 - 113 °F (-5 - 45 °C) |
Operating Relative Humidity | 5% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 35A |
Output Connections | (21) IEC 320 C13 (3) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V 3PH |
Input Frequency | 50/60 Hz |
Input Connections | CS8365 |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Line Current per phase | 35A |
Maximum Input Current per phase | 35A |
Load Capacity | 12.5 kVA |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The AP7998B was formerly designated the AP7998.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8441 Features:
APC Metered-by-outlet Rack Power Distribution Units (PDUs) provide active metering of individual outlets to enable energy optimization and detailed capacity planning. Metered-by-outlet rack PDUs provide a more granular level of power utilization data to allow Data Center Managers to make more precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered-by-outlet Rack PDUs include individual outlet power metering, a temperature/humidity sensor port, alarm thresholds, and locking IEC receptacles. Users can access and configure Metered-by-outlet rack PDUs through secure Web, SNMP, or Telnet Interfaces and are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8459NA3 Features:
APC Metered-by-outlet Rack Power Distribution Units (PDUs) provide active metering of individual outlets to enable energy optimization and detailed capacity planning. Metered-by-outlet rack PDUs provide a more granular level of power utilization data to allow Data Center Managers to make more precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered-by-outlet Rack PDUs include individual outlet power metering, a temperature/humidity sensor port, alarm thresholds, and locking IEC receptacles. Users can access and configure Metered-by-outlet rack PDUs through secure Web, SNMP, or Telnet Interfaces and are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8459WW Features:
APC Metered-by-outlet Rack Power Distribution Units (PDUs) provide active metering of individual outlets to enable energy optimization and detailed capacity planning. Metered-by-outlet rack PDUs provide a more granular level of power utilization data to allow Data Center Managers to make more precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered-by-outlet Rack PDUs include individual outlet power metering, a temperature/humidity sensor port, alarm thresholds, and locking IEC receptacles. Users can access and configure Metered-by-outlet rack PDUs through secure Web, SNMP, or Telnet Interfaces and are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8461 Features:
APC Metered-by-outlet Rack Power Distribution Units (PDUs) provide active metering of individual outlets to enable energy optimization and detailed capacity planning. Metered-by-outlet rack PDUs provide a more granular level of power utilization data to allow Data Center Managers to make more precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered-by-outlet Rack PDUs include individual outlet power metering, a temperature/humidity sensor port, alarm thresholds, and locking IEC receptacles. Users can access and configure Metered-by-outlet rack PDUs through secure Web, SNMP, or Telnet Interfaces and are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8632 Features:
APC Metered-by-outlet with Switching Rack Power Distribution Units (PDUs) provide active metering of individual outlets and remote on/off switching control of individual outlets. Metering-by-outlet allows users to enable energy optimization and detailed capacity planning. The Metered-by-outlet feature provide a granular level of power utilization data that allow Data Center Managers to make precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. The Switching feature provides remote power on/off outlet level controls for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Metered by Outlet with Switching Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8641 Features:
APC Metered-by-outlet with Switching Rack Power Distribution Units (PDUs) provide active metering of individual outlets and remote on/off switching control of individual outlets. Metering-by-outlet allows users to enable energy optimization and detailed capacity planning. The Metered-by-outlet feature provide a granular level of power utilization data that allow Data Center Managers to make precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. The Switching feature provides remote power on/off outlet level controls for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Metered by Outlet with Switching Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8659 Features:
APC Metered-by-outlet with Switching Rack Power Distribution Units (PDUs) provide active metering of individual outlets and remote on/off switching control of individual outlets. Metering-by-outlet allows users to enable energy optimization and detailed capacity planning. The Metered-by-outlet feature provide a granular level of power utilization data that allow Data Center Managers to make precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. The Switching feature provides remote power on/off outlet level controls for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Metered by Outlet with Switching Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8659NA3 Features:
APC Metered-by-outlet with Switching Rack Power Distribution Units (PDUs) provide active metering of individual outlets and remote on/off switching control of individual outlets. Metering-by-outlet allows users to enable energy optimization and detailed capacity planning. The Metered-by-outlet feature provide a granular level of power utilization data that allow Data Center Managers to make precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. The Switching feature provides remote power on/off outlet level controls for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Metered by Outlet with Switching Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, FCC Part 15 Class A, ICES-003, IEC 60950, PSE, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8661 Features:
APC Metered-by-outlet with Switching Rack Power Distribution Units (PDUs) provide active metering of individual outlets and remote on/off switching control of individual outlets. Metering-by-outlet allows users to enable energy optimization and detailed capacity planning. The Metered-by-outlet feature provide a granular level of power utilization data that allow Data Center Managers to make precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. The Switching feature provides remote power on/off outlet level controls for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Metered by Outlet with Switching Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. Metered Rack PDUs include threshold alarms, real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8930 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8931 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8932 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8941 Features:
APC AP8941 Switched Rack PDU
Input: 30A - 200, 208, 230
Input Connections: NEMA L6-30P
Cord Length: 10 feet (3.05 meters)
Output Connections: (21) C13 & (3) C19
Output: 200, 208
Mounting: Zero-U Vertical
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable
Standard Lead Time: Usually in Stock
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8958 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8958NA3 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8959 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8959NA3 Features:
APC AP8959NA3 Switched Rack PDU
Input: 20A - 200, 208, 230
Input Connections: NEMA L6-20P
Cord Length: 9.84 feet (3 meters)
Output Connections: (21) C13 & (3) C19
Output: 208
Mounting: Zero-U Vertical
Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable
Standard Lead Time: Usually in Stock
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8961 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8962 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8965 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8970 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>Environmental | |
Operating Environment | 23 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 5-95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 5-95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Overload Protection | Yes |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A |
Environmental Compliance | RoHS, REACH, PEP, EOLI, Battery Directive Compliant |
Standard Warranty | 2 years repair or replace |
APC AP8981 Features:
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Switched Rack PDUs include remote outlet controls, real-time power monitoring (current metering), a temperature/humidity sensor port, power sequencing delays, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
]]>NOTE: Compatible with select NetBotz appliances.
AP9324 Features:
Specifications:
Note: You can extend the length of the sensor cable up to 15 m (50 feet) using the RJ-45 coupling and standard CAT-5 cabling
Standard Lead Time: Usually in Stock
]]>Note: You can extend the length of the sensor cable up to 15 m (50 feet) using the RJ-45 coupling and standard CAT-5 cabling
Standard Lead Time: Usually in Stock
]]>The American Power Conversion (APC) NetBotz Rack Access PX-HID provides electronic monitoring and access control of your enclosure. It uses a Network Management Card, which provides full management capabilities over a network using Telnet, HTTP, HTTPS, Secure Sockets Layer (SSL), Secure CoPy (SCP), and SNMP.
NetBotz PX-HID Key Features
NetBotz PX-HID is ideal for:
Availability
Manageability
Protection
Specifications
SKU | AP9361 |
Components | Rack Access Appliance; 2 Proximity Card Reader Handles; 2 RJ-45 Style Door switch kits; cables; hardware; 2 HID cards |
Accessibility | Remote Access; Proximity Card; Master Key Override; User Access Scheduling |
Rack Mounting | 0U or 1U |
Enclosure Compatibility | NetShelter SX |
Alert Notification | SNMP; Paging; E-mail; and Visual Beacon |
Network Configuration | TCP/IP Configuration Parameters |
Management Solutions | StruxureWare Data Center Expert HP Open View What’s Up Gold |
Appliance Ports | 1 RJ-45 Ethernet Port; Serial Port (configuration only); Front Door Lock Port (handle); Front Door Switch (switch); Peripheral Port (reserved for future use); Rear Door Lock Port (handle); Rear Door Switch (switch) |
Power | Integrated 110/240 volt power supply (IEC connector) - Power Cord included. Input Power: 100 Watts |
Proximity Card Capacity | Up to 20 proximity card signatures per appliance |
Proximity Card Compatibility | HID Proximity Cards (HID 125kHz proximity technology) Card formats: H10301, H10302, H10304, Corp1000 |
Environmental | Operating Environment: 32 - 113 °F ( 0 - 45 °C ) Operating Relative Humidity: 0 - 95 % Operating Elevation: 0-10000 ft ( 0-3000 meters ) Storage Temperature: -15 - 65 °C Storage Relative Humidity: 0 - 95 % Storage Elevation: 0-50000 ft ( 0-15000 meters ) |
Approvals | VCCI Class B |
Warranty | 2 years repair or replace |
Rack Access PX-HID protects NetShelter SX enclosures from unauthorized access. This IP-based system uses electronic locks to secure enclosures. Access is granted through HID-based proximity cards or the secure Web interface (using Telnet, HTTP, HTTPS, Secure Sockets Layer (SSL), Secure CoPy (SCP), and SNMP). Rack Access PX-HID integrates with existing building security; it is compatible with HID based proximity cards using 125kHz technology, and can authenticate from a RADIUS server. Alarm notification options, such as email, indicate a compromised security state. Administrators can easily configure access for individual employees, schedule access to equipment for maintenance purposes, and view audit trails. Mounting options include traditional rack mounting or toolless zero-U mounting.
* In airflow of >100 ft/min.
Includes: Installation guide, Mounting pads
Standard Lead Time: Usually in Stock
]]>* In airflow of >100 ft/min.
Includes: Installation guide, Mounting pads
Standard Lead Time: Usually in Stock
]]>Mechanical | |
Height | 24.40 in. (620 mm.) |
Width | 1.76 in. (44 mm.) |
Depth | 1.76 in. (44 mm.) |
Weight | 4.82 lbs. (2.20 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 120V |
Maximum Total Current Draw per Phase | 20A |
Output Connections | (14) NEMA 5-15R |
Always on Outlets | 14 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L5-20P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 90-132 VAC |
Maximum Line Current per phase | 20A |
Maximum Input Current per phase | 20A |
Load Capacity | 2400 VA |
Conformance | |
Regulatory Approvals | cUL Recognized, CSA, UL 1363,UL Recognized |
APC AP9551 Features:
APC AP9565 Features:
Mechanical | |
Height | 1.75 in. (44 mm.) |
Width | 17.60 in. (447 mm.) |
Depth | 2.25 in. (57 mm.) |
Weight | 5.50 lbs. (2.50 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 16A |
Output Connections | (12) IEC 320 C13 |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 16A |
Input Connections | NEMA L6-20P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 20A |
Load Capacity | 3328 VA |
Conformance | |
Regulatory Approvals | cUL Listed, CSA,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
APC AP9566 Features:
Mechanical | |
Height | 1.63 in. (41 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 3.25 in. (83 mm.) |
Weight | 1.00 lbs. (0.45 kg.) |
Color | Black |
Mechanical | |
Height | 1.75 in. (44 mm.) |
Width | 17.60 in. (447 mm.) |
Depth | 2.53 in. (64 mm.) |
Weight | 6.00 lbs. (2.73 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 24A |
Output Connections | (4) IEC 320 C19 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L6-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 200-240 VAC |
Maximum Line Current per phase | 30A |
Maximum Input Current per phase | 30A |
Load Capacity | 4992 VA |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, METI Denan, UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
APC AP9570 Features:
Mechanical | |
Height | 1.75 in. (44 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 2.50 in. (64 mm.) |
Weight | 5.60 lbs. (2.55 kg.) |
Color | Black |
Environmental | |
Operating Environment | 5 - 113 °F (-15 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-15000 feet (0-4500 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 24A |
Output Connections | (12) IEC 320 C13 |
Always on Outlets | 12 |
Overload Protection | Yes |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L6-30P |
Cord Length | 12 feet (3.66 meters) |
Number of Power Cords | 1 |
Acceptable Input Voltage | 200-240 VAC |
Maximum Line Current per phase | 30A |
Maximum Input Current per phase | 30A |
Load Capacity | 4992 VA |
Conformance | |
Regulatory Approvals | cUL Listed, CSA, UL 60950,UL Listed |
The APC AP9571 is a Rack PDU, Basic, 1U, 30A, 208V, (12) C13. APC Basic Rack PDU , Input: 208V , Input Connections: NEMA L6-30P , Cord Length: 12 feet ( 3.66 meters ) , Output: 208V , Output Connections: IEC 320 C13.
Includes: Installation guide, Rack Mounting brackets, User Manual
APC AP9571 Features:
APC AP9571A Features:
APC AP9572 Features:
Can be used as a UPS management accessory that provides two dry contact input and one relay output interface to APC UPS management offers with UIO ports such as the UPS Network Management Card (AP9631) or Dry Contact I/O SmartSlot Card (AP9613).
]]>APC NetShelter WX wall-mounted rack enclosures for networking applications in IT environments.
]]>APC AR100 Specifications:
External Dimensions: 25.75"H x 23"W x 24.25"D
Internal Dimension: 22.75"H x 19"W x 19"D
Net Weight: 94.2 lbs. (42.73 kg.)
Weight Capacity (static load): 200 lbs. (90.91 kg.)
Minimum Mounting Depth: 15 in. (387.00 mm.)
Rack Height: 13U
Color: Black
Standards: EIA-310-D
APC NetShelter WX wall-mounted rack enclosures for networking applications in IT environments.
]]>APC AR100HD Specifications:
External Dimensions: 25.75"H x 23"W x 24.25"D
Internal Dimension: 22.75"H x 19"W x 19"D
Net Weight: 94 lbs. (42.74 kg)
Weight Capacity (static load): 200 lbs. (90.91 kg.)
Minimum Mounting Depth: 9.45 in. (240 mm.)
Rack Height: 13U
Color: Black
Standards: EIA-310-D]]>
APC AR201 Specifications:
Net Weight: 26 lbs. (11.82 kg.)
Weight Capacity (static load): 750 lbs. (340.91 kg.)
Color: Black
Vertical Posts: 3 gauge
Standards: EIA-310-D, EIA-310-E
]]>
The APC AR203 is a 43U, 4-post rack with advanced power distribution and cable management features for server, networking, and telecom applications in secure IT environments. Bolts to the floor, Numbered U positions, Ships Unassembled, Supports 24 inch floor tile spacing, Supports 600 mm floor tile spacing, Vertical Mounting Rails with square holes . Includes: User Manual
APC AR203 Specifications:
Net Weight: 92 lbs. (41.82 kg.)
Weight Capacity (static load): 1000 lbs. (454.55 kg.)
Minimum Mounting Depth: 29.13 in. (740 mm.)
Maximum Mounting Depth: 29.13 in. (740 mm.)
Color: Black
Standards: EIA-310-D
Mechanical | |
Height | 81.50 in. (2070 mm.) |
Width | 23.50 in. (597 mm.) |
Depth | 42.20 in. (1070 mm.) |
Weight | 518 lbs. (235.45 kgs.) |
Rack Height & Color | 42U & Black |
Units per Pallet | 1 |
Vertical Posts | 16 gauge |
Front door | 16 gauge |
Rear door | 16 gauge |
Roof | 18 gauge |
EIA Mounting Rails | 14 gauge |
Side Panels | 20 gauge |
Conformance | |
Regulatory Approvals | NEB GR-63-CORE (Seismic Zone 4) |
Standards | EIA-310-E |
Integrated vertical 1U mounting spaces: The APC AR2480 enclosure includes vertical 19" width 1U knockouts adjacent to the enclosures standard EIA-310 equipment mounting u-spaces that can be removed and replaced with 1U accessories. Replace these knockouts with accessories such as patch panels, environmental management devices, Rack Power Distribution, or even pass-through brush strips for cabling pass-through.
Includes: Baying hardware, Doors, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Qty 4 - Bolt-down brackets, Roof, Side panels, Unpacking sheet
]]>Apc NetShelter (AR3100) includes: casters, doors, ground studs, installation guide, leveling feet, mounting hardware, roof, side panels
APC AR3100 Specifications:
Net Weight: 275.20 lbs. (125.09 kg.)
Weight Capacity (static load): 3000 lbs. (1363.64 kg.)
Weight Capacity (dynamic load): 2250 lbs. (1022.73 kg.)
Minimum Mounting Depth: 7.52 in. (191 mm.)
Maximum Mounting Depth: 36.77 in. (934 mm.)
Color: Black
Vertical Posts: 16 gauge
Front Door: Perforated Front, Locking - 16 gauge
Rear Door: Perforated Split Rear, Locking - 18 gauge
Roof: 18 gauge
EIA Mounting Rails: 14 gauge
Side Panels: 18 gauge
Regulatory Approvals: EIA-310-D
Standards: UL 60950
ROHS/WEEE Compliance: RoHS
The NetShelter SX cabinet and packaging system is designed to safely integrate, transport, unload and deploy up to 2000 lbs (907 kg) of IT equipment. The cabinet is paired with a shock absorbing pallet, unloading ramp, and impact resistant shell. The system has been engineered, tested and approved for secure shipment of fully converged systems.
Includes: Baying hardware, Documentation CD, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting Hardware, Pre-installed casters, Side Panels
APC AR3100SP1 Specifications:
Mechanical | |
Height | 47.19 in. (1198 mm.) |
Width | 23.62 in. (600 mm.) |
Depth | 42.13 in. (1070 mm.) |
Weight | 196.00 lbs. (89.09 kg.) |
Weight Capacity (static load) | 3000.00 lbs. (1363.64 kg.) |
Weight Capacity (dynamic load) | 2250.00 lbs. (1022.73 kg.) |
Minimum Mounting Depth | 7.52 in. (191 mm.) |
Maximum Mounting Depth | 36.02 in. (915 mm.) |
Rack Height | 24U |
Color | Black |
Material | |
Vertical Posts | 16 gauge |
Front Door | 16 gauge |
Rear Door | 18 gauge |
Roof | 18 gauge |
EIA Mounting Rails | 14 gauge |
Side Panels | 18 gauge |
Conformance | |
Regulatory Approvals | EIA-310-D |
Standards | UL 60950 |
Environmental Compliance | RoHS |
APC AR3104 Features:
Baying hardware, Key(s), Leveling feet, Pre-installed casters, Side Panels
]]>Includes: Baying hardware, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting Hardware, Pre-installed casters, Side Panels, User Manual
Standard Lead Time: Usually in Stock
]]>with Sides
]]>APC Netshelter (AR3107) Features: Adjustable Front Vertical Mounting Rail, Adjustable mounting depth, Cable Access
Casters, Deep form factor (42"/1070mm), Door ventilation exceeds 830 in2 (5355 cm2), Expanded Cable Management, Facilitates overhead cable management, Facilitates overhead power distribution, Facilitates rear/vertical cable management, Guaranteed Compatibility, Leveling feet, Lockable doors and side panels, Mounts two APC metered PDUs in one rear channel, Multi-vendor equipment compatibility, Numbered U positions, Optimized depth, Protective grounding provisions, Provides Mounting Option for PDUs, Provides security between enclosures when bayed together, Quick release doors, Quick release side panels, Removable doors and side panels, Reversible doors, Ships fully assembled ,Split rear doors, Supports 24 inch floor tile spacing, Supports 600 mm floor tile spacing, Tool-less mounting, UBC Zone 4 stabilization provisions, Ventilated Doors with Scalable Cooling Options, Vertical Mounting Rails with square holes
APC Netshelter (AR3107) Includes: Casters, Doors, Ground Studs, Installation Guide, Leveling feet, Mounting Hardware, Roof, Side Panels
APC AR3107 Specifications:
Net Weight: 304.10 lbs. (138.23 kg.)
Weight Capacity (static load): 3000 lbs. (1363.64 kg.)
Weight Capacity (dynamic load): 2250 lbs. (1022.73 kg.)
Minimum Mounting Depth: 7.52 in. (191 mm.)
Maximum Mounting Depth: 36.77 in. (934 mm.)
Color: Black
Vertical Posts: 14 gauge
Front Door: 16 gauge
Rear Door: 18 gauge
Roof: 18 gauge
EIA Mounting Rails: 14 gauge
Side Panels: 18 gauge
Regulatory Approvals: EIA-310-D
Standards: UL 60950
ROHS/WEEE Compliance: RoHS
The APC 3150 comes with Casters, Doors, Ground Studs, Installation Guide, Leveling feet, Mounting Hardware, Roof, Side Panels
AR3150 Features:
Adjustable front vertical mounting rail, adjustable mounting depth, cable access, casters, deep form factor (42"/1070mm), door ventilation exceeds, 830 in2 (5355 cm2), expanded cable management, facilitates overhead cable management, facilitates overhead power distribution, facilitates rear/vertical cable management, guaranteed compatibility, leveling feet, lockable doors and side panels, mounts two APC metered PDUs in one rear channel, multi-vendor equipment compatibility, numbered U positions, optimized depth, protective grounding provisions, provides mounting option for PDUs, provides security between enclosures when bayed together, quick release doors, quick release side panels, removable doors and side panels, reversible doors, ships fully assembled, split rear doors, structural stability, tool-less mounting, UBC Zone 4 stabilization provisions, ventilated doors with scalable cooling options, vertical mounting rails with square holes, wide form factor (29.5"/750mm)
APC AR3150 Specifications:
Net Weight: 343.10 lbs. (155.96 kg.)
Weight Capacity (static load): 3000 lbs. (1363.64 kg.)
Weight Capacity (dynamic load): 2250 lbs. (1022.73 kg.)
Minimum Mounting Depth: 11.22 in. (285 mm.)
Maximum Mounting Depth: 36.26 in. (921 mm.)
Color: Black
Vertical Posts: 14 gauge
Front Door: 16 gauge
Rear Door: 16 gauge
Roof: 18 gauge
EIA Mounting Rails: 14 gauge
Side Panels: 18 gauge
Regulatory Approvals: EIA-310-D
Standards: UL 60950
ROHS/WEEE Compliance: RoHS
with advanced cooling, power distribution, and cable management for server and networking applications in IT environments.
]]>The APC AR3157 comes with Casters, Doors, Ground Studs, Installation Guide, Leveling feet, Mounting Hardware, Roof, Side Panels
AR3157 Features:
Adjustable front vertical mounting rail, adjustable mounting depth, cable access, casters, deep form factor (42"/1070mm), door ventilation exceeds, 830 in2 (5355 cm2), expanded cable management, facilitates overhead cable management, facilitates overhead power distribution, facilitates rear/vertical cable management, guaranteed compatibility, leveling feet, lockable doors and side panels, mounts two APC metered PDUs in one rear channel, multi-vendor equipment compatibility, numbered U positions, optimized depth, protective grounding provisions, provides mounting option for PDUs, provides security between enclosures when bayed together, quick release doors, quick release side panels, removable doors and side panels, reversible doors, ships fully assembled, split rear doors, structural stability, tool-less mounting, UBC Zone 4 stabilization provisions, ventilated doors with scalable cooling options, vertical mounting rails with square holes, wide form factor (29.5"/750mm)
APC AR3157 Specifications:
Net Weight: 372.00 lbs. (169.09 kg.)
Weight Capacity (static load): 3000 lbs. (1363.64 kg.)
Weight Capacity (dynamic load): 2250 lbs. (1022.73 kg.)
Minimum Mounting Depth: 11.22 in. (285 mm.)
Maximum Mounting Depth: 36.26 in. (921 mm.)
Color: Black
Vertical Posts: 14 gauge
Front Door: 16 gauge
Rear Door: 16 gauge
Roof: 18 gauge
EIA Mounting Rails: 14 gauge
Side Panels: 18 gauge
Regulatory Approvals: EIA-310-D
Standards: UL 60950
ROHS/WEEE Compliance: RoHS
Includes: Mesh Front Door, Split Mesh Rear Door, Side Panels, Baying hardware, Documentation CD, Key(s), Leveling feet, Mounting Hardware, Pre-installed casters, User Manual
APC AR3300 Detail View
APC AR3300 Specifications:
fully enclosed
]]>Includes: Baying hardware, Documentation CD, Key(s), Leveling feet, Mounting Hardware, Pre-installed casters, Side Panels, User Manual
APC NetShelter SX AR3307 Detail View
APC AR3307 Specifications:
Includes: Baying hardware, Documentation CD, Key(s), Leveling feet, Mounting Hardware, Pre-installed casters, Side Panels, User Manual
APC AR3350 Specifications:
Server cabinet optimized for cable management, power distribution, and airflow management.
]]>
APC NetShelter AR3357 Back View
Specifications:
AR4000MV Features & Benefits
Sound Proof Oak Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), 2 Fans, Casters, Brush Strip. Max Thermal Capacity: 800W
]]>Netshelter CX Mini AR4000MV is specifically designed to house a complete small-office IT installation comprised of one or two servers, network hardware and peripheral devices. It combines extreme noise reduction and moderate thermal capacity with exceptional reliability and an all-inclusive, plug-and-play specification. Designed to accept tower form factor servers, the CX Mini can also be converted to accept rack form factor servers using a 12U rack mount conversion kit (AR4000MV12U). The resulting EIA rack is 600 mm/23.6" deep.
Includes: Brush strip, Door , Key(s), Lockable door, Office-type Casters, Power strip with (3) IEC receptacles, Qty 1 - IEC to NEMA 5-15P power cord, Qty 1 - IEC-C13 - Shuko input power cord, Qty 2 - Fans, Qty 3 - IEC-C14 - NEMA 5-15R equipment adapter cords, Removeable lockable rear panel, Soundproofing, Unpacking sheet
]]>Includes: Installation guide , Mounting hardware , Qty 2 - Horizontal Rails
]]>Quick install vertical mounting rail kit - Using pre-existing holes and supplied hardware, these vertical mounting rails fit quickly and conveniently into place, transforming the CX Mini into a 12U Rack Enclosure.
Includes : Installation guide, Mounting hardware, Qty 4 - 12U Vertical Mounting Rails
]]>AR4000MVX429 Features & Benefits
Sound Proof Black Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), 2 Fans, Casters, Brush Strip. Max Thermal Capacity: 800W
]]>Netshelter CX Mini AR4000MVX429 is specifically designed to house a complete small-office IT installation comprised of one or two servers, network hardware and peripheral devices. It combines extreme noise reduction and moderate thermal capacity with exceptional reliability and an all-inclusive, plug-and-play specification. Designed to accept tower form factor servers, the CX Mini can also be converted to accept rack form factor servers using a 12U rack mount conversion kit (AR4000MV12U). The resulting EIA rack is 600 mm/23.6" deep.
Includes: Brush strip, Door , Key(s), Lockable door, Office-type Casters, Power strip with (3) IEC receptacles, Qty 1 - IEC to NEMA 5-15P power cord, Qty 1 - IEC-C13 - Shuko input power cord, Qty 2 - Fans, Qty 3 - IEC-C14 - NEMA 5-15R equipment adapter cords, Removeable lockable rear panel, Soundproofing, Unpacking sheet
]]>AR4000MVX431 Features & Benefits
Sound Proof Dark Grey Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), 2 Fans, Casters, Brush Strip. Max Thermal Capacity: 800W
]]>Includes: Brush strip, Door , Key(s), Lockable door, Office-type Casters, Power strip with (3) IEC receptacles, Qty 1 - IEC to NEMA 5-15P power cord, Qty 1 - IEC-C13 - Shuko input power cord, Qty 2 - Fans, Qty 3 - IEC-C14 - NEMA 5-15R equipment adapter cords, Removeable lockable rear panel, Soundproofing, Unpacking sheet
]]>AR4000MVX432 Features & Benefits
Sound Proof White Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), 2 Fans, Casters, Brush Strip. Max Thermal Capacity: 800W
]]>Netshelter CX Mini AR4000MVX432 is specifically designed to house a complete small-office IT installation comprised of one or two servers, network hardware and peripheral devices. It combines extreme noise reduction and moderate thermal capacity with exceptional reliability and an all-inclusive, plug-and-play specification. Designed to accept tower form factor servers, the CX Mini can also be converted to accept rack form factor servers using a 12U rack mount conversion kit (AR4000MV12U). The resulting EIA rack is 600 mm/23.6" deep.
Includes: Brush strip, Door , Key(s), Lockable door, Office-type Casters, Power strip with (3) IEC receptacles, Qty 1 - IEC to NEMA 5-15P power cord, Qty 1 - IEC-C13 - Shuko input power cord, Qty 2 - Fans, Qty 3 - IEC-C14 - NEMA 5-15R equipment adapter cords, Removeable lockable rear panel, Soundproofing, Unpacking sheet
]]>AR4018A Features & Benefits
Sound Proof Oak Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 1.8kW
]]>NetShelter CX AR4018A enclosures are specialized enclosures with integrated cooling, noise dampening, and power distribution for server and network applications in office environments. The enclosures provide storage for industry-standard (EIA-310), 19-inch rack-mount hardware, which includes servers, voice, data, networking, internetworking, and APC power protection equipment.
Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4018X429 Features & Benefits
Sound Proof Black Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 1.8kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4018X431 Features & Benefits
Sound Proof Dark Grey Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 1.8kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4018X432 Features & Benefits
Sound Proof White Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 1.8kW
]]>NetShelter CX AR4018X432 enclosures are specialized enclosures with integrated cooling, noise dampening, and power distribution for server and network applications in office environments. The enclosures provide storage for industry-standard (EIA-310), 19-inch rack-mount hardware, which includes servers, voice, data, networking, internetworking, and APC power protection equipment.
Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4024A Features & Benefits
Sound Proof Oak Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 2.4kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4024X429 Features & Benefits
Sound Proof Black Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 2.4kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4024X431 Features & Benefits
Sound Proof Dark Grey Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 2.4kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4024X432 Features & Benefits
Sound Proof White Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 2.4kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4038A Features & Benefits
Sound Proof Oak Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 3.6kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4038X429 Features & Benefits
Sound Proof Black Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 3.6kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4038X431 Features & Benefits
Sound Proof Dark Grey Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 3.6kW
]]>NetShelter CX AR4038X431 enclosures are specialized enclosures with integrated cooling, noise dampening, and power distribution for server and network applications in office environments. The enclosures provide storage for industry-standard (EIA-310), 19-inch rack-mount hardware, which includes servers, voice, data, networking, internetworking, and APC power protection equipment.
Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>AR4038X432 Features & Benefits
Sound Proof White Finish Rack - Includes PDU (14x 5-15 out, 15A, 120V), Casters, Leveling Feet. Max Thermal Capacity: 3.6kW
]]>Includes: Casters, Installation guide, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side panels
]]>NetShelter CX Bolt Down Kit (AR4601) - This Bolt-down Kit is for the 18, 24 and 38U Netshelter CX product set. Of the 2 brackets in this set, one L-bracket affixes to the underside of the CX to pre-existing bolts. The other L-bracket affixes to the floor. Design is such that the 2 brackets can be fixed to the CX and floor first, and then the CX can be wheeled into place to secure the enclosure to the floor. Connection between the 2 brackets can be made using the nut & bolt hardware included, or by using a locking mechanism (not provided). RoHS Compliant, REACH (Contains No SVHCs).
Added safety: Use the Bolt-down kit to provide added safety in dynamic environments (such as on board a ship) or in seismically active regions.
Added security: Ensure your CX cannot easily be moved or stolen.
Includes : Installation guide , Mounting hardware , Qty 2 - Brackets
]]>Includes : Door mounting hardware , Installation guide
Foremerly the AR4602
]]>Includes : Installation guide, Mounting hardware, Qty 2 - Metal filter lower cassettes, Qty 2 - Washeable filters for lower cassettes
]]>Includes : Installation guide, Mounting hardware, Qty 2 - Metal filter lower cassettes, Qty 2 - Metal filter upper cassettes, Qty 2 - Washeable filters for lower cassettes, Qty 2 - Washeable filters for upper cassettes
]]>Includes : Installation guide, Mounting hardware, Qty 2 - Metal filter lower cassettes, Qty 2 - Metal filter upper cassettes, Qty 2 - Washeable filters for lower cassettes, Qty 2 - Washeable filters for upper cassettes
]]>Includes: Grommets , Installation Guide , Mounting hardware
]]>Includes: Mounting Hardware, Qty 6 Cable retainers with snap hinges
APC AR7580 Features:
Specifications:
Includes: Qty 2 - 42U Vertical Cable Managers, Installation guide, Mounting Hardware, Qty 6 - Cable retainers with snap hinges, Top securing bracket
]]>Includes: Qty 2 - 45U Vertical Cable Managers, Installation guide, Mounting Hardware, Qty 6 - Cable retainers with snap hinges, Top securing bracket
]]>Includes: Qty 2 - 48U Vertical Cable Managers, Installation guide, Mounting Hardware, Qty 6 - Cable retainers with snap hinges, Top securing bracket
]]>APC AR7701 Features:
Specifications:
Includes: Installation guide
APC AR7710 Features:
APC Cable Containment Brackets Application Example
Specifications:
Includes: Installation guide, Mounting hardware
APC AR7711 Features:
APC Accessory Mounting Bracket Application Example View
APC AR7711 Specifications:
Includes: Qty 2 - 35"H Vertical Cable Managers, Installation guide, Mounting Hardware, Qty 6 - Cable retainers with snap hinges, Top securing bracket
Please note: This pair of Vertical Cable Managers are each 35" high. When stacked on top of each other, they wil provide cable management for one side of a 42U rack. For cable management on both sides, two sets of the APC AR7721 Vertical Cable Manager will be required.
Includes: Qty 2 - 45U Vertical Cable Managers, Installation guide, Mounting Hardware, Qty 6 - Cable retainers with snap hinges, Top securing bracket
]]>Includes: Qty 2 - 48U Vertical Cable Managers, Installation guide, Mounting Hardware, Qty 6 - Cable retainers with snap hinges, Top securing bracket
]]>Includes: Baying hardware, Duct panels, Foam gasket strips, Installation guide, Mounting Hardware, Rear door and bottom sealing kit, Roof, Roof mounting hardware
For the tall range alternative, see AR7752
]]>Includes: Baying hardware, Duct panels, Foam gasket strips, Installation guide, Mounting Hardware, Rear door and bottom sealing kit, Roof, Roof mounting hardware
For the short range alternative, see AR7751
]]>Includes: Baying hardware, Duct panels, Foam gasket strips, Installation guide, Mounting Hardware, Rear door and bottom sealing kit, Roof, Roof mounting hardware
For the tall range alternative, see AR7754
]]>Includes: Baying hardware, Duct panels, Foam gasket strips, Installation guide, Mounting Hardware, Rear door and bottom sealing kit, Roof, Roof mounting hardware
For the short range alternative, see AR7753
]]>Includes: Installation guide, Mounting Hardware
]]>The 3-tumbler combination lock handle, with master key override, offers additional security to a standard NetShelter enclosure. Utilizes same mounting as standard swing-handle. User configurable combination. Includes: Installation Guide and 2 Combination Lock Handles.
]]>APC AR8136BLK Features:
APC 1U Toolless Blanking Panel Detail View
Specifications:
APC AR8206ABLK Features:
APC AR8206ABLK Specifications:
Mechanical | |
Height | 2.13 in. (54 mm.) |
Width | 12.50 in. (318 mm.) |
Depth | 6.90 in. (175 mm.) |
Weight | 4.00 lbs. (1.82 kg.) |
Color | Black |
Environmental | |
Audible noise at 1 meter from surface of unit | 0.00 dBA |
Input | |
Nominal Input Voltage | 208V,230V |
Input Frequency | 50/60 Hz |
Input Connections | British BS1363A IEC-320 C14 Schuko CEE 7/7P |
Conformance | |
Regulatory Approvals | CSA,UL Listed |
APC AR8207BLK Features:
APC AR8355 Features:
APC AR8355 Specifications:
APC AR8560 Specifications:
Mechanical | |
Height | 7.54 in. (191 mm.) |
Width | 23.50 in. (597 mm.) |
Depth | 12.45 in. (317 mm.) |
Weight | 10.0 lbs. (4.56 kgs.) |
Color | Black |
Conformance | |
Regulatory Approvals | UL Classified |
Environmental Compliance | RoHS, China RoHS, REACH, contains No SVHCs |
APC AR8561 Specifications:
Mechanical | |
Height | 7.54 in. (191 mm.) |
Width | 23.50 in. (597 mm.) |
Depth | 12.50 in. (317 mm.) |
Weight | 11.95 lbs. (5.43 kgs.) |
Conformance | |
Regulatory Approvals | UL Classified |
Environmental Compliance | RoHS, REACH, contains No SVHCs |
Mechanical | |
Height | 0.05 in. (1 mm.) |
Width | 12.36 in. (314 mm.) |
Depth | 7.03 in. (178 mm.) |
Weight | 1.17 lbs. (0.53 kgs.) |
Color | Black |
Conformance | |
Regulatory Approvals | UL Classified |
Environmental Compliance | RoHS, REACH, contains No SVHCs |
APC AR8571 Specifications:
Mechanical | |
Height | 7.54 in. (191 mm.) |
Width | 29.41 in. (597 mm.) |
Depth | 12.50 in. (317 mm.) |
Weight | 15.22 lbs. (6.92 kgs.) |
Conformance | |
Regulatory Approvals | UL Classified |
Environmental Compliance | RoHS, China RoHS, REACH, contains No SVHCs |
Mechanical | |
Height | 0.05 in. (1 mm.) |
Width | 24.41 in. (620 mm.) |
Depth | 12.20 in. (309 mm.) |
Weight | 2.29 lbs. (1.04 kgs.) |
Color | Black |
Conformance | |
Regulatory Approvals | UL Classified |
Environmental Compliance | RoHS, REACH, contains No SVHCs |
APC AR8576 Specifications:
Mechanical | |
Weight | 0.29 lbs. (0.13 kg.) |
Height | 1.80 in. (45 mm.) |
Width | 5.29 in. (134 mm.) |
Depth | 1.07 in. (27 mm.) |
APC AR8600A Features:
APC Horizontal Cable Manager Application Example
Specifications:
Formerly the AR8600
]]>APC AR8652 Specifications:
Mechanical | |
Height | 2.95 in. (75 mm.) |
Width | 6.00 in. (152 mm.) |
Depth | 1.51 in. (38 mm.) |
Weight | 0.50 lbs. (0.23 kgs.) |
APC BG500 Specifications:
Mechanical | |
Height | 2.13 in. (54 mm.) |
Width | 11.42 in. (290 mm.) |
Depth | 7.52 in. (191 mm.) |
Weight | 4.84 lbs. (2.2 kg) |
Color | Black |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 6 ft ( 1.83 meters ) |
Number of Power Cords | 1 |
Output | |
Output Power Capacity | 300 Watts / 500 VA |
Max Configurable Power | 300 Watts / 500 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 50/60Hz +/- 3 Hz |
Topology | Standby |
Waveform Type | Quasi-sine Wave |
Output Connections | (4) NEMA 5-15R (Battery Backup) |
Transfer Time | 8ms typical : 10 ms maximum |
Batteries and Runtime | |
Battery type | Li-ion |
Typical Recharge Time | 16 hour(s) |
RBC Quantity | 1 |
Battery Volt-Amp-Hour Capacity | 28 |
Surge Protection | |
Surge Energy Rating | 613 Joules |
Data Line Protection | RJ-11 Modem/Fax protection |
Conformance | |
Appovals | California (CEC) Battery Charger, cTUVus, ENERGY STAR (USA), FCC Part 15 Class B, FCC Part 68, UL 1778 |
Equipment Protection Policy | Lifetime : $150000 |
Standard Warranty | 3 years repair or replace |
Sustainable Offer Status | |
RoHS REACH, PEP, EOLI, Battery Directive |
The APC Back-UPS Pro BG500 is 500VA, 300 Watts, Input 120V / Output 120V
The Back-UPS Pro family offers guaranteed power protection for high performance computer systems, routers/modems, external storage devices, game consoles and other electronics in your home or business. These UPSs supply electronics with abundant battery backup during outages and stabilize unsafe voltage levels. They also provide power protection from damaging surges and spikes, and allow the use of management software so you get the most out of your UPS.
Includes: Cat 5 ethernet cable , CD with software , Installation guide , Telephone Cable , USB cable , User Manual , Wall-mounting template , Warranty card
]]>APC BG1000G Specifications:
Mechanical | |
Height | 9.84 in. (250 mm.) |
Width | 3.94 in. (100 mm.) |
Depth | 15.04 in. (382 mm.) |
Weight | 23.58 lbs. (10.72 kg) |
Color | Black |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 6 ft ( 1.83 meters ) |
Max Input Current | 12.0 A |
Output | |
Output Power Capacity | 600 Watts / 1000 VA |
Max Configurable Power | 600 Watts / 1000 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 50/60Hz +/- 3 Hz |
Topology | Line Interactive |
Waveform Type | Stepped approximation to a sinewave |
Output Connections | (4) NEMA 5-15R(Battery Backup), (4) NEMA 5-15R (Battery Backup) |
Transfer Time | 8ms typical : 12 ms maximum |
Batteries and Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical Recharge Time | 8 Hours |
Replacement Battery | APCRBC123 |
RBC Quantity | 1 |
Battery Volt-Amp-Hour Capacity | 157 |
Surge Protection | |
Surge Energy Rating | 354 Joules |
Data Line Protection | Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector), Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector) |
Filtering | Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous |
Environmental | |
Operating Environment | 32 - 104 °F ( 0 - 40 °C ) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0-10000 ft ( 0-3000 meters ) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95 % |
Storage Elevation | 0-50000 ft ( 0-15000 meters ) |
Audible noise at 1 m. | 45.0 dBA |
Online Thermal Dissipation | 67.6 BTU/hr |
Conformance | |
Appovals | DOC/Industry Cananda, ENERGY STAR (USA), UL Listed |
Equipment Protection Policy | Lifetime : $150000 |
Standard Warranty | 3 years repair or replace |
Sustainable Offer Status | |
RoHS REACH, PEP, EOLI |
The APC Back-UPS Pro BG1000G is 1000VA, 600 Watts, Input 120V / Output 120V
The Back-UPS Pro family offers guaranteed power protection for high performance computer systems, routers/modems, external storage devices, game consoles and other electronics in your home or business. These UPSs supply electronics with abundant battery backup during outages and stabilize unsafe voltage levels. They also provide power protection from damaging surges and spikes, and allow the use of management software so you get the most out of your UPS.
Includes: USB cable , User Manual
]]>APC BG1300G Specifications:
Mechanical | |
Height | 11.85 in. (301 mm.) |
Width | 4.41 in. (112 mm.) |
Depth | 15.04 in. (382 mm.) |
Weight | 23.1 lbs. (10.5 kg) |
Color | Black |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Max Input Connections | NEMA 5-15P |
Output | |
Output Power Capacity | 780 Watts / 1300 VA |
Max Configurable Power | 780 Watts / 1300 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 50/60Hz +/- 3 Hz |
Topology | Line Interactive |
Waveform Type | Stepped approximation to a sinewave |
Output Connections | (5) NEMA 5-15R (Battery Backup), (5) NEMA 5-15R |
Transfer Time | 8ms typical : 12 ms maximum |
Batteries and Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Included Battery Modules | 1 |
Typical Recharge Time | 8 Hours |
Replacement Battery | APCRBC124 |
RBC Quantity | 1 |
Battery Volt-Amp-Hour Capacity | 187 |
Surge Protection | |
Surge Energy Rating | 354 Joules |
Data Line Protection | Cable modem / Video protection, Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector) |
Filtering | Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous |
Environmental | |
Operating Environment | 32 - 104 °F ( 0 - 40 °C ) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0-30000 ft ( 0-9000 meters ) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95 % |
Storage Elevation | 0-50000 ft ( 0-15000 meters ) |
Audible noise at 1 m. | 45.0 dBA |
Conformance | |
Appovals | ENERGY STAR (USA), FCC Part 15 Class B, NOM, TUV, UL 1778 |
Equipment Protection Policy | Lifetime : $150000 |
Standard Warranty | 3 years repair or replace |
Sustainable Offer Status | |
RoHS REACH, PEP, EOLI |
The APC Back-UPS Pro BG1300G is 1300VA, 780 Watts, Input 120V / Output 120V
The Back-UPS Pro family offers guaranteed power protection for high performance computer systems, routers/modems, external storage devices, game consoles and other electronics in your home or business. These UPSs supply electronics with abundant battery backup during outages and stabilize unsafe voltage levels. They also provide power protection from damaging surges and spikes, and allow the use of management software so you get the most out of your UPS.
Includes: CD with software , USB cable , User Manual
]]>APC BG1500G Specifications:
Mechanical | |
Height | 11.85 in. (301 mm.) |
Width | 4.41 in. (112 mm.) |
Depth | 15.04 in. (382 mm.) |
Weight | 26.62 lbs. (12.1 kg) |
Color | Black |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Max Input Connections | NEMA 5-15P |
Cord Length | 6 ft ( 1.83 meters ) |
Output | |
Output Power Capacity | 865 Watts / 1500 VA |
Max Configurable Power | 865 Watts / 1500 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 50/60Hz +/- 3 Hz |
Topology | Line Interactive |
Waveform Type | Stepped approximation to a sinewave |
Output Connections | (5) NEMA 5-15R (Battery Backup), (5) NEMA 5-15R |
Transfer Time | 8ms typical : 12 ms maximum |
Batteries and Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Included Battery Modules | 1 |
Typical Recharge Time | 8 Hours |
Replacement Battery | APCRBC124 |
RBC Quantity | 1 |
Battery Volt-Amp-Hour Capacity | 187 |
Surge Protection | |
Surge Energy Rating | 354 Joules |
Data Line Protection | Cable modem / Video protection, Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector) |
Filtering | Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous |
Environmental | |
Operating Environment | 32 - 104 °F ( 0 - 40 °C ) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0-30000 ft ( 0-9000 meters ) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95 % |
Storage Elevation | 0-50000 ft ( 0-15000 meters ) |
Audible noise at 1 m. | 45.0 dBA |
Conformance | |
Appovals | ENERGY STAR (USA), FCC Part 15 Class B, NOM, TUV, UL 1778 |
Equipment Protection Policy | Lifetime : $150000 |
Standard Warranty | 3 years repair or replace |
Sustainable Offer Status | |
RoHS REACH, PEP, EOLI |
The APC Back-UPS Pro BG1300G is 1500VA, 865 Watts, Input 120V / Output 120V
The Back-UPS Pro family offers guaranteed power protection for high performance computer systems, routers/modems, external storage devices, game consoles and other electronics in your home or business. These UPSs supply electronics with abundant battery backup during outages and stabilize unsafe voltage levels. They also provide power protection from damaging surges and spikes, and allow the use of management software so you get the most out of your UPS.
Includes: CD with software , USB cable , User Manual
]]>APC BG700G Specifications:
Mechanical | |
Height | 7.48 in. (190 mm.) |
Width | 3.58 in. (91 mm.) |
Depth | 12.2 in. (310 mm.) |
Weight | 15.73 lbs. (7.15 kg) |
Color | Black |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Cord Length | 6 ft ( 1.83 meters ) |
Input Voltage Range | 88 - 143 V |
Max Input Current | 12.0 A |
Output | |
Output Power Capacity | 420 Watts / 700 VA |
Max Configurable Power | 420 Watts / 700 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 50/60Hz +/- 3 Hz |
Topology | Line Interactive |
Waveform Type | Stepped approximation to a sinewave |
Output Connections | (3) NEMA 5-15R (Battery Backup), (3) NEMA 5-15R |
Transfer Time | 8ms typical : 12 ms maximum |
Batteries and Runtime | |
Included Battery Modules | 1 |
Typical Recharge Time | 12 Hours |
Replacement Battery | RBC17 |
RBC Quantity | 1 |
Battery Volt-Amp-Hour Capacity | 94 |
Surge Protection | |
Surge Energy Rating | 354 Joules |
Data Line Protection | Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector), Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector) |
Filtering | Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous |
Environmental | |
Operating Environment | 32 - 104 °F ( 0 - 40 °C ) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0-10000 ft ( 0-3000 meters ) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95 % |
Storage Elevation | 0-50000 ft ( 0-15000 meters ) |
Audible noise at 1 m. | 45.0 dBA |
Online Thermal Dissipation | 48.5 BTU/hr |
Conformance | |
Appovals | California (CEC) Battery Charger, cTUVus, ENERGY STAR (USA), FCC Part 15 Class B, FCC Part 68, UL 1778 |
Equipment Protection Policy | Lifetime : $150000 |
Standard Warranty | 3 years repair or replace |
Sustainable Offer Status | |
RoHS REACH, PEP, EOLI, Battery Directive |
The Back-UPS Pro family offers guaranteed power protection for high performance computer systems, routers/modems, external storage devices, game consoles and other electronics in your home or business. These UPSs supply electronics with abundant battery backup during outages and stabilize unsafe voltage levels. They also provide power protection from damaging surges and spikes, and allow the use of management software so you get the most out of your UPS.
Includes: USB cable , User Manual
]]>Includes: Installation guide
APC CAT6PNL-24 Features:
APC CAT6PNL-24 Specifications:
Includes: Installation guide
APC CAT6PNL-48 Features:
APC CAT6PNL-48 Specifications:
APC Server Rack Air Distribution Options | |
The APC Rack Air Distribution Unit is a 2U fan unit that works with an existing precision air conditioning system to deliver cool air to the equipment contained in a rack enclosure. The Rack Air Distribution Unit connects into the raised floor and pulls supply air directly into the enclosure. This prevents the conditioned air from mixing with warmer room air before reaching the equipment. The Rack Air Distribution Unit minimizes temperature differences between the top and bottom of the enclosure. It also prevents hot exhaust air from recirculating to the inlet of the enclosure. The product is recommended for rack enclosures with loads greater than 1.5kW and can provide airflow for loads up to 3.5kW. It is also ideal for enclosures in raised floor environments where underfloor air distribution is inadequate. Add a 3-Pack of Filters to ensure clean air circulating through your rack to prevent dust buildup. |
Air Discharge Patterns | Upflow, Ducted |
Input Power | 1200 Watts |
Input frequency | 50/60 Hz |
Input Connections | IEC-320 C14, NEMA 5-15P |
Air Flow | 2000.00 CFM |
Control panel | Multi-function LCD status and control console |
Maximum height | 75.50 inches (1918 mm) |
Maximum width | 23.50 inches (597 mm) |
Maximum depth | 10.00 inches (254 mm) |
Net weight | 148.00 lbs. ( 67.27 kg) |
Shipping Weight | 198.00 lbs. ( 90.00 kg) |
Color | Black |
Regulatory Approvals | BSMI,cUL Listed,CE,EN 55022 Class A,EN 55024,FCC Part 15 Class A,ICES-003,IEC 61000-3-2,IEC 61000-3-3,UL Listed,VCCI,VDE |
Standard warranty | 2 years repair or replace |
APC ACF400 Manageability:
APC ACF400 Availability:
APC ACF400 Adaptability:
APC ACF400 Total Cost of Ownership:
Mechanical | |
Height | 75.50 in. (1918 mm.) |
Width | 29.00 in. (737 mm.) |
Depth | 10.00 in. (254 mm.) |
Weight | 170.00 lbs. (77.27 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 122 °F (0 - 50 °C) |
Storage Temperature | 32 - 122 °F (0 - 50 °C) |
Operating Relative Humidity | 0% |
Storage Relative Humidity | 0% |
Storage Elevation | 0-15000 feet (0-4500 meters) |
Audible noise at 1 meter from surface of unit | 79.00 dBA |
General | |
Cooling Capacity Options | 16.50 kW |
Air Discharge Patterns | Upflow, Ducted |
Air Flow | 2000 CFM |
Input | |
Nominal Input Voltage | 100V,120V,200V,208V,230V |
Input Power | 1200 Watts |
Input Frequency | 50/60 Hz |
Input Connections | IEC-320 C14 NEMA 5-15P |
Communications & Management | |
Control panel | Multi-function LCD status and control console |
Conformance | |
Regulatory Approvals | cUL Listed, CE,EN 55022 Class A,EN 55024,FCC Part 15 Class A,ICES-003,IEC 61000-3-2,IEC 61000-3-3,UL Listed, VDE,VCCI |
Includes: Documentation CD, Installation guide, Operations and maintenance manual
]]>Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.50 in. (445 mm.) |
Depth | 4.50 in. (114 mm.) |
Weight | 9.90 lbs. (4.50 kg.) |
Color | Black |
Environmental | |
Operating Environment | 32 - 113 °F (0 - 45 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | -13 - 149 °F (-25 - 65 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
Nominal Output Voltage | 208V |
Maximum Total Current Draw per Phase | 30A |
Output Connections | (16) IEC 320 C13 |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz |
Regulatory Derated Input Current (North America) | 24A |
Input Connections | NEMA L6-30P |
Cord Length | 10 feet (3.05 meters) |
Number of Power Cords | 1 |
Maximum Input Current per phase | 30A |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,FCC Part 15 Class A,ICES-003,Industry Canada,UL 60950,UL Listed |
Environmental Compliance | RoHS 7b Exemption |
The APC AP7911 is a Switched Rack PDU , Input: 208V , Input Connections: NEMA L6-30P , Cord Length: 10 feet ( 3.05 meters ) , Output: 208V , Output Connections: IEC 320 C13
Includes: Documentation CD, Installation guide, Rack Mounting brackets
APC AP7911 Features:
Stabilizer Plate to stabilize the enclosure. Front or Side mounting capabilities, Low Profile, Stabilizes enclosure . Includes: Installation Guide, Mounting hardware, Qty 1 - Plate
]]>Please note, the APC NBRK0320 is discontinued. For replacement or upgrade options, please contact your Server Racks Online sales representative at 1-866-722-5776.
The NetBotz 320 is a next generation monitoring solution ideal for smaller spaces that require comprehensive monitoring in locations with little need for future expandability. This fully featured solution provides rich image graphics and integrated environmental monitoring. The appliance form factor is plug-n-play, and can be up and running within 30 minutes. The web interface provides immediate sensor readings, real-time camera images, and immediate configuration. SSL encryption is standard on the NetBotz 320, providing secure transmission of alerts to prevent potential interception and misuse of camera and audio clips. Alerts can be sent via email, SNMP, or text messaging. Alerts can now include graphs as well as pictures, and separate alert actions can be triggered at different alert severity levels.
NetBotz 320 (NBRK0320) Features:
NetBotz 320 (NBRK0320) Specifications:
Housing | |
Wall Mount: 12.45cmW x 19.55cmH x 2.27cmD, 20 gauge metal | |
Rack Mount | Rack Mount: 19" rack mount, 1U, 20 gauge metal |
Indicators |
|
| Appliance operational/alert status, network speed, network |
Additional Camera Pods |
|
| N/A |
Additional Sensor Pod |
|
| N/A |
Protocols |
|
| TCP/IP, HTTP, SMTP, SNMP, DHCP, DNS, Socks V4 or V5 Proxy server |
Network Interfaces |
|
| Ethernet 10/100 Mbps standard |
Management Interface |
|
| Ethernet 1Internet Explorer v 5.5 or later; Netscape Navigator v 4.79, 6.0 or later; Mozilla 1.3 or later0/100 Mbps standard |
Client System Requirements |
|
| Microsoft Windows, (2000 or XP SP1), Red Hat EL 3, Fedora Core 3, or Debian GNU 3 or a Sparc workstation running Solaris 9 with all patch bundles recommended by Sun. Use of Advanced View interface requires a one-time download of the Java Runtime Environment Plug-in from Sun Microsystems. |
Operational Environment |
|
| Temperature: 2º to 50º C (35º F to 120º F); Relative Humidity: |
Screen Resolutionion |
|
| 1024 x 768 recommended |
Regulatory Certification |
|
| FCC Class A, CE, VCCI on system, UL on power supply |
Please note, the APC NBRK0420 is discontinued. For replacement or upgrade options, please contact your Server Racks Online sales representative at 1-866-722-5776.
The NetBotz 420 (NBRK0420) is a fully featured monitoring solution ideal for small to medium-sized spaces that require comprehensive monitoring capabilities with moderate expandability. This next-generation solution has a modular architecture that gives the user tremendous flexibility along with rich image graphics and integrated environmental monitoring. The appliance form factor is plug-n-play, and can be up and running within 30 minutes. The web interface provides immediate sensor readings, real-time camera images, and immediate configuration. The appliance can also be wirelessly connected to an 802.11b wireless LAN. SSL encryption is standard on the NetBotz 420 (NBRK0420)providing secure transmission of alerts to prevent potential interception and misuse of camera clips. Alerts can be sent via email, SNMP, or text messaging. Customizable thresholds and alert policies include specialized threshold types such as rate-of-change and above-value-too-long. Alerts can now include graphs as well as pictures, and separate alert actions can be triggered at different alert severity levels.
NetBotz 420 (NBRK0420) Features:
NetBotz 420 (NBRK0420) Specifications:
Please note, the APC NBWL0320 is discontinued. For replacement or upgrade options, please contact your Server Racks Online sales representative at 1-866-722-5776.
The NetBotz 320 is a next generation monitoring solution ideal for smaller spaces that require comprehensive monitoring in locations with little need for future expandability. This fully featured solution provides rich image graphics and integrated environmental monitoring. The appliance form factor is plug-n-play, and can be up and running within 30 minutes. The web interface provides immediate sensor readings, real-time camera images, and immediate configuration. SSL encryption is standard on the NetBotz 320, providing secure transmission of alerts to prevent potential interception and misuse of camera and audio clips. Alerts can be sent via email, SNMP, or text messaging. Alerts can now include graphs as well as pictures, and separate alert actions can be triggered at different alert severity levels.NetBotz 320 Features
Please note, the APC NBWL0420 is discontinued. For replacement or upgrade options, please contact your Server Racks Online sales representative at 1-866-722-5776
The NetBotz 420 is a fully featured monitoring solution ideal for small to medium-sized spaces that require comprehensive monitoring capabilities with moderate expandability. This next-generation solution has a modular architecture that gives the user tremendous flexibility along with rich image graphics and integrated environmental monitoring. The appliance form factor is plug-n-play, and can be up and running within 30 minutes. The web interface provides immediate sensor readings, real-time camera images, and immediate configuration. The appliance can also be wirelessly connected to an 802.11b wireless LAN. SSL encryption is standard on the NetBotz 420, providing secure transmission of alerts to prevent potential interception and misuse of camera and audio clips. Alerts can be sent via email, SNMP, or text messaging. Customizable thresholds and alert policies include specialized threshold types such as rate-of-change and above-value-too-long. Alerts can now include graphs as well as pictures, and separate alert actions can be triggered at different alert severity levels.NetBotz 420 Features
The InRow RD is a computer room air conditioning system designed to be installed in the row of racks. This placement ensures proper airflow paths, while also increasing energy efficiency. The unit captures hot exhaust air directly from the hot aisle and distributes cool air through the front of the unit, ensuring temperatures are held at set point conditions.
]]>APC RACSC101 Specifications:
Mechanical | |
Height | 78.40 in. (1991 mm.) |
Width | 35.43 in. (900 mm.) |
Depth | 50.13 in. (1273 mm.) |
Weight | 729.70 lbs. (331.68 kg.) |
Color | Black |
Environmental | |
Storage Temperature | 32 - 104 °F (0 - 40 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-15000 feet (0-4500 meters) |
Audible noise at 1 meter from surface of unit | 80.00 dBA |
General | |
Cooling Options | Air-cooled Self-contained |
Compressor Type | Rotary |
Air Discharge Patterns | Horizontal |
Intake Air | Rear Return |
Refrigerant | R410A |
Refrigerant Charge | 3 pounds |
Air Flow | 1200 CFM |
Condensate Pump Capacity | 1.30 gal/hour |
Amp Draw Nominal | 16A |
Amp Draw In-Rush | 56 |
Input | |
Input Power | 2940 Watts |
Input Frequency | 60 Hz |
Rack Height | 42U |
Input Connections | NEMA L6-20P |
Communications & Management | |
Control panel | Multi-function LCD status and control console |
APC RACSC101 Features:
Additional specifications are given below.
NOTE: Special Order - Call for Quoted Lead Times
]]>APC RACSC112 Specifications:
Mechanical | |
Height | 78.40 in. (1991 mm.) |
Width | 35.43 in. (900 mm.) |
Depth | 58.13 in. (1477 mm.) |
Weight | 823.30 lbs. (374.23 kg.) |
Color | Black |
Environmental | |
Audible noise at 1 meter from surface of unit | 70.00 dBA |
General | |
Cooling Options | Air-cooled Self-contained |
Compressor Type | Rotary |
Air Discharge Patterns | Horizontal |
Intake Air | Rear Return |
Refrigerant | R410A |
Refrigerant Charge | 3 pounds |
Air Flow | 1200 CFM |
Condensate Pump Capacity | 1.30 gal/hour |
Amp Draw Nominal | 16A |
Amp Draw In-Rush | 56 |
Input | |
Input Power | 2940 Watts |
Input Frequency | 60 Hz |
Rack Height | 42U |
Input Connections | NEMA L6-20P |
Communications & Management | |
Control panel | Multi-function LCD status and control console |
The APC InRow SC RACSC112 System is 1 InRow SC, 1 NetShelter SX Rack 600mm, with Front and Rear Containment which is a rapidly deployable, self-contained row-based cooling solutions for server rooms and wiring closets.
Includes:
APC RACSC112 Features:
Standard Lead Time: Special Order - Call for Quoted Lead Times
]]>Standard Lead Time: Usually Ships within 2 Weeks
]]>The NetBotz Spot Fluid Sensor uses electronic circuits to detect the presence of fluid. If the sensor contacts are shorted, the fluid detection circuits will not work. Shorting can occur when the sensor is placed on a metal surface, or on some materials, such as cement flooring (particularly cement that is wet), that may be conductive and grounded.
Place the Spot Fluid Sensor on the provided insulator sheet to avoid shorting the contacts.
Configuring the Spot Fluid Sensor
Once the Spot Fluid Sensor is conected to the NetBotz Appliance, it will be detected automatically, and will appear in the Sensor Readings pane.
The Spot Fluid Sensor is a normally open (NO) dry contact sensor. Use the Dry Contact task to configure the settings for the NetBotz Spot Fluid Sensor. See the NetBotz Appliance User’s Guide for more information about the Advanced View.
Caring For and Cleaning Your Sensor
While your Spot Fluid Sensor is fluid-resistant, it is intended for leak detection only and is not designed to be immersed for extended periods of time. Use only plain tap water to clean your Spot Fluid Sensor. Do not use soap or detergents of any kind. In addition, the RJ-45 coupling should not be an area where water will collect or condensation may form, as this may corrode the coupling.
]]>Note: You can extend the length of the sensor cable up to 30.5 m (100 feet) using the RJ-45 coupling and standard CAT-5 cabling
Includes: Cable Ties
Standard Lead Time: Usually in Stock
]]>Note: You can extend the length of the sensor cable up to 30.5 m (100 feet) using the RJ-45 coupling and standard CAT-5 cabling
Includes: Cable Ties
Standard Lead Time: Usually Ships within 2 Weeks
]]>Note: You can extend the length of the sensor cable up to 30.5 m (100 feet) using the RJ-45 coupling and standard CAT-5 cabling
Includes: Cable Ties
Standard Lead Time: Usually Ships within 2 Weeks
]]>Note: You can extend the length of the sensor cable up to 30.5 m (100 feet) using the RJ-45 coupling and standard CAT-5 cabling
To use your NetBotz Dry Contact Cable, connect the two wire leads at the end of the NetBotz Dry Contact Cable to the dry contact-based sensor. Use the instructions included with your dry contact based sensor to determine the proper wiring for the sensor.
Includes: Cable Ties
Standard Lead Time: Usually Ships within 2 Weeks
]]>Note: You can extend the length of the sensor cable up to 30.5 m (100 feet) using the RJ-45 coupling and standard CAT-5 cabling
To use your NetBotz 0-5V Cable, connect the two wire leads at the end of the NetBotz 0-5V Cable to the 0-5V sensor. Use the instructions included with your sensor to determine the proper wiring for the sensor.
Includes: Cable Ties
Standard Lead Time: Usually Ships within 2 Weeks
]]>Note: You can extend the length of the sensor cable up to 30.5 m (100 feet) using the RJ-45 coupling and standard CAT-5 cabling
The typical location for the vibration sensor is on a main support in the top half of the enclosure. Avoid installing the sensor near a cooling unit, which could cause the sensor to give false alarms.
Includes: Cable Ties
Standard Lead Time: Usually Ships within 2 Weeks
]]>Operation:
The Smoke Sensor LEDs function as follows:
Note: You can extend the length of the sensor cable up to 30.5 m (100 feet) using the RJ-45 coupling and standard CAT-5 cabling
This Smoke Sensor includes a System Sensor model 4W-B, I3 Series, Photoelectric Smoke Detector. For complete safety, installation, operation, and maintenance information, refer to the I3 Series Installation and Maintenance Instructions on the System Sensor Web site.
Includes: Cable ties, Rack Mounting brackets
Standard Lead Time: Usually Ships within 2 Weeks
]]>Note: You can extend the total length of the Rope Leak Sensor up to 30.5 m (100 ft) using NetBotz 6.1-m (20-ft) Rope Leak Sensor Extensions (NBES0309).
Includes: Cable ties
Standard Lead Time: Usually Ships within 2 Weeks
]]>Note: You can extend the total length of the Rope Leak Sensor up to 30.5 m (100 ft) using these NetBotz 6.1-m (20-ft) Rope Leak Sensor Extensions.
Includes: Cable ties
Standard Lead Time: Usually Ships within 2 Weeks
]]>Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using theRJ-45 coupling and standard CAT-5 cabling.
Standard Lead Time: Usually in Stock
]]>APC NetBotz NBES0312 62 in. Door Switch Sensor enables a NetBotz appliance to detect the act of opening a door of a 3rd party enclosure, which can trigger surveillance recording.
Note, Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the RJ-45 coupling and standard CAT-5 cabling.
Standard Lead Time: Usually in Stock
]]>Note, Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the RJ-45 coupling and standard CAT-5 cabling.
Standard Lead Time: Usually in Stock
]]>A professional-quality audio/video monitoring solution, the NetBotz Camera Pod 120 (NBPD0121) provides digital video and audio monitoring capabilities. A CS-mount optical lens, combined with the built-in imager, provides highresolution 24-bit color video, while the integrated microphone enables audio monitoring. The Camera Pod 120 (NBPD0121) can be docked to the NetBotz 500 main base station or tethered to the base station using a USB cable. In addition to a docked Camera Pod 120, up to three additional Camera Pod 120s (NBPD0121) can be connected to a single NetBotz 500 base station.
NetBotz Camera Pod 120 (NBPD0121) Features:
The Netbotz CCTV Adapter Pod 120 (NBPD0123) is designed for the customer who wants to utilize CCTV cameras with the NetBotz physical threat monitoring system. This enables images from CCTV cameras to take advantage of WallBotz 500 capabilities such as motion sensing, alert image capture settings, and alert customization. The Netbotz CCTV Adapter Pod (NBPD0123) provides images of up to 640 x 480 resolution, 24-bit color, and up to 30 frames per second (color and resolution may be limited by CCTV video source). The Netbotz CCTV camera connects to either the BNC, RCA, or S-Video input connector on the pod; video source input can be NTSC, PAL, or SECAM format. The pod has a USB port to connect it to the WallBotz 500 base station, and also has external microphone, speaker, and door switch jacks.
NetBotz EIP CCTV Adapter Pod 120 (NBPD0123) Features:
Standard Lead Time: Usually in Stock
]]>Includes:
The APC NetBotz 4-20mA Sensor Pod (NBPD0129) enables you to connect up to four 4-20mA sensors to your NetBotz 455 or NetBotz 500 appliance.
Hundreds of 4-20mA sensors are available from third-parties, including sensors designed to measure liquid flow rates, liquid levels, gases, pressure, temperature, air velocity, voltage, and more. These sensors are connected to the pod using screw terminals that are attached to the pod. The 4-20mA Sensor Pod also provides a supplemental power port (18 volts nominal, 50mA) for use with 3- and 4-wire 4-20mA sensors.
Standard Lead Time: Usually in Stock
]]>Includes: NetBotz Rack Sensor Pod 150, Rackmount Brackets, Temperature/Humidity Sensor (AP9335TH), 8-32 x 1/4-in Phillips head screws, A-Link terminator, Documentation CD, Installation Guide
]]>Depending on the connected appliance, the Pod 150 can be cascaded for more sensor inputs. You can connect the NetBotz 150 to one of the following appliances: NetBotz Rack Monitor 200 (NBRK0200), NetBotz Rack Monitor 450 (NBRK0450), NetBotz Room Monitor 455 (NBRK0451, NBWL0455, NBWL0456), or NetBotz Rack Monitor 550 (NBRK0550, NBRK0570). The Rack Sensor Pod 150 cannot be used with a NetBotz Room Monitor 355.
Standard Lead Time: Usually in Stock
]]>Includes:
You can connect the NetBotz 155 to one of the following appliances: NetBotz Rack Monitor 450 (NBRK0451), NetBotz Room Monitor 455 (NBWL0455, NBWL0456), or NetBotz Rack Monitor 550 (NBRK0550, NBRK0570). The Room Sensor Pod 155 cannot be used with a NetBotz Room Monitor 355 or a NetBotz Rack Monitor 200. The total number of NetBotz 155s that you can use and the types of sensors that can be used depends upon the specific appliance to which the NetBotz 155 is connected. For details, see the installation and quick configuration manual included with your appliance.
Standard Lead Time: Usually in Stock
]]>The imager of the NetBotz 160 supports two imaging modes: Wide Screen mode and Pan and Scan mode.
Formerly the NBPD0160
]]>The American Power Conversion (APC) NetBotz Camera Pod 160 is a motion-sensitive camera capable of sending image data through a USB connection to a Rack Monitor 450 (NBRK0451, NBWL0455, NBWL0456), Room Monitor 550 (NBRK0550, NBRK0570). The NetBotz 160 can be triggered remotely by the appliance in response to a number of environmental alarms or events, such as a temperature spike or the action of opening a door. The NetBotz 160 can also provide constant surveillance of an area or entrance.
]]>Availability
Manageability
Protection
NetBotz NBPD0171 Specifications | |
Components | Rack Access Pod, 2 Proximity Card Reader Handles, 2 RJ-45 Style Door switch kits, hardware, 2 HID cards |
Accessibility | Remote Access, Proximity Card, Master Key Override, User Access Scheduling |
Rack Mounting | 0U or 1U; (Basement mounting in an APC NetShelterTM SX rack) |
Enclosure Compatibility | APC NetShelter SX |
Alert Notification | Email, E-mail, and Visual Beacon |
Mass Configuration | Up to 130 doors with 5 NetBotz appliances |
Management Solutions | InfraStruxure Central |
Appliance Ports | 2 A-Link Ports, 2 Door Lock Port (handle), 2 Door Switch (switch) |
Power | Power over A-Link |
Proximity Card Compatibility | HID Proximity Cards (HID 125kHz proximity technology) Card formats: H10301, H10302, H10304, Corp1000 |
User Interface | NetBotz Advanced View |
Power Supply Recommendation Room Monitor 455 | 2 Maximum Rack Access Pods can be monitored per appliance; One AP9505i power supply required per 1 or 2 rack access pods |
Power Supply Recommendation Rack Monitor 550 | 13 Maximum Rack Access Pods can be monitored per appliance; One AP9505i power supply required for the third attached pod plus an additional power supply for each additional third pod |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 0 - 95% |
Operating Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Approvals | RoHS, REACH (Contains no SVHCs), CE, EN 55022 Class A, EN 55024, GOST, ICES-003, IRAM, VCCI Class A |
Warranty | 2 years repair or replace |
Scalability:
- Monitor up 26 doors from one appliance
- Mass configure up to 130 doors on 5 NetBotz appliances using Advanced View user interface
Includes: Door sensor, Lock handles, Proximity card, Proximity reader, Rack Mounting brackets, Cable ties, Installation guide, User Manual
Standard Lead Time: Usually in Stock
]]>Availability
Manageability
Protection
NetBotz NBPD0172 Specifications | |
Components | Rack Access Pod, 2 Proximity Card Reader Handles, 2 RJ-45 Style Door switch kits, hardware, 2 HID cards |
Accessibility | Remote Access, Proximity Card, Master Key Override, User Access Scheduling |
Rack Mounting | 0U or 1U |
Enclosure Compatibility | Chatsworth GlobalFrame |
Alert Notification | Email, E-mail, and Visual Beacon |
Mass Configuration | Up to 130 doors with 5 NetBotz appliances |
Management Solutions | InfraStruxure Central |
Appliance Ports | 2 A-Link Ports, 2 Door Lock Port (handle), 2 Door Switch (switch) |
Power | Power over A-Link |
Proximity Card Compatibility | HID Proximity Cards (HID 125kHz proximity technology) Card formats: H10301, H10302, H10304, Corp1000 |
User Interface | NetBotz Advanced View |
Power Supply Recommendation Room Monitor 455 | 2 Maximum Rack Access Pods can be monitored per appliance; One AP9505i power supply required per 1 or 2 rack access pods |
Power Supply Recommendation Rack Monitor 550 | 13 Maximum Rack Access Pods can be monitored per appliance; One AP9505i power supply required for the third attached pod plus an additional power supply for each additional third pod |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 0 - 95% |
Operating Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Approvals | RoHS, REACH (Contains no SVHCs), CE, EN 55022 Class A, EN 55024, GOST, ICES-003, IRAM, VCCI Class A |
Warranty | 2 years repair or replace |
Scalability:
- Monitor up 26 doors from one appliance
- Mass configure up to 130 doors on 5 NetBotz appliances using Advanced View user interface
Includes: Door sensor, Lock handles, Proximity card, Proximity reader, Rack Mounting brackets, Cable ties, Installation guide, User Manual
Standard Lead Time: Usually in Stock
]]>Operating Modes:
Coordinator - Each NetBotz host appliance and wireless sensor network must have one and only one Coordinator.
Router - A Wireless Sensor Pod configured as a Router extends the range of the wireless sensor network and passes information back and forth from the Coordinator to the End Devices, and from itself to Coordinator. It also reports sensor data from its internal sensors and any attached external sensors.
End Device - An End Device monitors attached and internal sensors and sends data back to the monitoring appliance through the network. Any Wireless Sensor Pod powered by batteries is automatically configured as an End Device.
Includes:
The APC The NetBotz Wireless Sensor Pod 180 (NBPD0180) connects to a NetBotz appliance and allows you to monitor the temperature and humidity (internal sensors included) in a rack in your data center. The Wireless Sensor Pod includes 3 Universal Sensor ports for connecting additional sensors that allow you to monitor rack door access, and multiple temperature readings for the rack.
Compatible with NetBotz Room Monitor 455 (NBWL0455, NBWL0456), NetBotz Rack Monitor 450 (NBRK0451), NetBotz Rack Monitor 550 (NBRK0550), or NetBotz Rack Monitor 570 (NBRK0570). Room Monitor 455, Rack Monitor 550, and Rack Monitor 570 appliances support a total of 48 wireless devices on the wireless sensor network. The Wireless Sensor Pod 180 can be configured as the Coordinator, a Router, or an End Device in your wireless sensor network. NetBotz USB Coordinator & Router (NBWC100U) is used to connect the Wireless Sensor Pod to a NetBotz appliance when used in Coordinator mode, or to supply USB power when in Router mode.
Standard Lead Time: Usually in Stock
]]>Features
Management
Sensors
NBRK0201 Package Contents
APC NetBotz 200 Installation & Configuration Manual (PDF)
NetBotz 200 (NBRK0201) Specifications
Physical Characteristics | |
Width | 17.0 in. (432mm.) |
Height | 1.71 in. (43mm.) |
Depth | 1.70 in. (43mm.) |
Net Weight | 3.15 lbs (1.43 kg) |
Mount Position | 1U Rackmount |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 0 - 95% |
Operating Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Power | |
Input Cords (Included) | 1.8-m (6-ft) IEC-320-C13 to IEC-320-C14 power cord 1.8-m (6-ft) NEMA 5-15P to IEC-320-C13 power cord |
Input Voltage, Nominal | 100–240 VAC; 50/60 Hz |
Maximum total current draw | 10 A (defined by Switched Outlet load + 0.25 A) |
Maximum output voltage for Switched Outlet | Defined by input voltage |
Maximum output current for Switched Outlet | 10 A (defined by Switched Outlet load) |
Voltage for Voltage Output contacts | 12 VDC, 24 VDC |
Current for Voltage Output contacts | 75 mA total for 12 V or 24 V load |
Current capacity of Relay Output contacts | 1 A, 30 V AC/DC (rated for Class 2 circuits only) |
Communications & Management | |
Protocols | HTTP, HTTPS, SCP, SMTP, SNMP v1, SNMP v3, SSH V1, SSH V2, TCP/IP, Telnet |
Network Interface Connections | RJ-45 10/100 Base-T |
Conformance | |
Approvals | AS/NZS 3548 (C-Tick) Class A, cUL Listed, CE, FCC Part 15 Class A, ICES-003, Low Voltage Directive 2006/95/EC, PSE, UL Listed, VCCI Class A, VDE |
RoHS | Compliant |
REACH | REACH: Contains SVHCs |
REACH SVHC | Bis(2-ethylhexyl)phthalate (DEHP) - 0.15 |
Battery Directive | Compliant |
Battery Notes | Contains Lithium Coin Cell |
Warranty | 2 years repair or replace |
The NetBotz 200 (NBRK0200) offers the most cost effective approach for environmental monitoring over the network. It allows you to monitor humidity, temperature, door contact and dry contact, and other environmental conditions remotely. Additional features like integration with StruxureWare Data Center Expert and user-defined alerts make the NetBotz 200 the perfect unit to protect your IT assets from environmental threats. The NetBotz 200 can be used for Network Closets to Data Centers monitoring, but it is commonly installed in Data Centers
Standard Lead Time: Usually in Stock
]]>Total Cost of Ownership
Availability
Protection
Manageability
NBRK0250 Includes
APC NetBotz 250 Data Sheet (PDF)
APC NetBotz 250 User Manual (PDF)
NetBotz 250 (NBRK0250) Specifications
Physical Characteristics | |
Height | 1.73 in (4.4 cm) |
Width | 17.01 in (43.2 cm) |
Depth | 2.32 in (5.9 cm) |
Net Weight | 2.80 lb(US) (1.27 kg) |
Mount Position | 1U Rackmount |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 0 - 95% |
Operating Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Connectors and Sensors | |
APC Universal Sensors Supported | Temperature; Temperature / Humidity; Door Contact; Smoke; Fluid Spot Leak; Vibration; Dry Contact |
Warranty | 2 years repair or replace |
The APC NetBotz Room Monitor 250 (NBRK0250) offers cost-effective and essential sensing, access control and instant alerting for IT environments of all sizes where IT rack space is available. Supports up to 42 wired sensors, 47 wireless sensors and badged access for 2 rack doors. APCTM NetBotzTM is designed to protect your IT infrastructure against environmental threats and unauthorized access risks that can cause unexpected downtime. APC NetBotz Room monitor 250 provides affordable sensing, access control and instant alerting for IT environments of all sizes where IT rack space is available. APC NetBotz 250 (NBRK0250) can support up to 42 wired sensors, 47 wireless sensors and badged access for 2 rack doors.
Standard Lead Time: Usually in Stock
]]>Features
Management:
Sensors
NBRK0451 Package Contents
APC NetBotz 450 Installation & Configuration Manual (PDF)
NetBotz 450 (NBRK0451) Specifications
Physical Characteristics | |
Height | 1.71 in. (43mm.) |
Width | 17.00 in. (432mm.) |
Depth | 3.66 in. (93mm.) |
Net Weight | 3.83 lbs (1.74 kg) |
Mount Position | 1U Rackmount |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 10 - 95% |
Operating Humidity | 10 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Power | AC 120-240 V @ 50/60 Hz - Internal Power Supply |
Power Cords | - 1.8-m (6-ft) IEC-320-C13 to IEC-320-C14 power cord - 1.8-m (6-ft) NEMA 5-15P to IEC-320-C13 power cord |
Connectors, Sensors & Cameras | |
Connectors | Ethernet: (1) 10/100 Base-T Ethernet Port Power: AC Line Inlet Port 100-240 V AC, 50/60 Hz (6) APC Universal Sensor Ports (1) USB Configuration Port – Style B (2) USB Ports – Style A (1) A-Link Port (1) Voltage Output Port (2) Relay Output Ports (4) 4-20mA Input Ports (1) Beacon Port (1) Rope Leak Sensor Port |
External Cameras Supported | NetBotz Camera Pod 160; Pelco IP Camera Families: Sarix, Spectra IV IP, Spectra Mini IP (Pelco IP110-CHV9, Pelco IP3701H-2, Pelco IPSD4N-W0); NTSC, PAL; IP110 Camclosure; IP3701; and CCTV Cameras integrated through the NetBotz CCTV Adapter Pod |
APC Universal Sensors Supported | Temperature; Temperature / Humidity; Door Contact; Smoke; Spot Leak; Vibration; Dry Contact; 0-5V; 4-20mA |
Sensors and Pods Supported | 4 - 20mA Sensor, Camera Pod 120, CCTV Adapter Pod 120, Rack Sensor Pod 150, Room Sensor Pod 155, Sensor Pod 120, Wireless Sensor Pod 180 |
Communications & Management | |
Protocols | TCP/IP; HTTP; HTTPS; SMTP; SNMP v1, v2c, and v3; DHCP; DNS; Socks v4 or V5 Proxy Server; A-Link |
Network Interface Connections | RJ-45 10/100 Base-T |
Management Interface | Internet Explorer v 5.5 or later; Mozilla 1.3 or later; Firefox 2.0 or later; NetBotz Advanced View Software; StruxureWare Data Center Expert |
Client System Requirements | Microsoft Windows 7 Pro and Ultimate; Vista Business and Enterprise; XP SP2-3; Red Hat EL4 and EL5 Use of Advanced View interface requires a one-time download of the Sun Java Runtime Environment |
Indicators | Alert; Power; Network Link |
Approvals | AS/NZS 3548 (C-Tick) Class A, cUL Listed, CE, FCC Part 15 Class A, GOST, ICES-003, IRAM, Low Voltage Directive 2006/95/EC, NOM, UL Listed, VCCI Class A, VDE |
Warranty | 2 years repair or replace |
The APC NetBotz Room Monitor 450 (NBRK0451) offers high performance security and environmental monitoring to prevent network intrusion. The NetBotz 450 is capable of video surveillance and monitoring to record human activity. It provides temperature, humidity, door contact, dry contact, 0-5V and 4-20mA sensors, vibration, smoke, 2-way audio monitoring, spot leak, rope water leak, and alarm beacon monitoring. Supports up to 2 external camera pods, 2 sensor pods and up to 18 Universal Sensors - expands from 6 universal sensor ports on the appliance to up to 18 with pod-based expansion (A-Link). For management of multiple NetBotz appliances, use StruxureWare Data Center Expert.
APC NBRK0451 Key Features:
Standard Lead Time: Usually in Stock
]]>Features
Management
Sensors
NBRK0570 Includes
APC NetBotz 570 Installation & Configuration Manual (PDF)
NetBotz 570 (NBRK0570) Specifications
Physical Characteristics | |
Height | 1.71 in. (43mm.) |
Width | 17.00 in. (432mm.) |
Depth | 3.66 in. (93mm.) |
Net Weight | 3.83 lbs (1.74 kg) |
Mount Position | 1U Rackmount |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 10 - 95% |
Operating Humidity | 10 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Power | AC 120-240V V @ 50/60 Hz - Internal Power Supply |
Power Cords | - 1.8-m (6-ft) IEC-320-C13 to IEC-320-C14 power cord - 1.8-m (6-ft) NEMA 5-15P to IEC-320-C13 power cord |
Connectors, Sensors & Cameras | |
Connectors | Ethernet: (1) 10/100 Base-T Ethernet Port Power: AC Line Inlet Port 100-240 V AC, 50/60 Hz (6) APC Universal Sensor Ports (1) USB Configuration Port – Style B (4) USB Ports – Style A (1) A-Link Port (1) Voltage Output Port (2) Relay Output Ports (4) 4-20mA Input Ports (1) Beacon Port (1) Rope Leak Sensor Port (1) RS-485 Modbus connection |
External Cameras Supported | NetBotz Camera Pod 160; Pelco IP Camera Families: Sarix, Spectra IV IP, Spectra Mini IP (Pelco IP110-CHV9, Pelco IP3701H-2, Pelco IPSD4N-W0); NTSC, PAL; IP110 Camclosure; IP3701; and CCTV Cameras integrated through the NetBotz CCTV Adapter Pod |
APC Universal Sensors Supported | Temperature; Temperature / Humidity; Door Contact; Smoke; Spot Leak; Vibration; Dry Contact; 0-5V; 4-20mA |
Sensors and Pods Supported | 4 - 20mA Sensor, Camera Pod 120, CCTV Adapter Pod 120, Rack Sensor Pod 150, Room Sensor Pod 155, Sensor Pod 120, Wireless Sensor Pod 180 |
Communications & Management | |
Protocols | TCP/IP; HTTP; HTTPS; SMTP; SNMP v1, v2c, and v3; DHCP; DNS; Socks v4 or V5 Proxy Server; A-Link |
Network Interface Connections | RJ-45 10/100 Base-T |
Management Interface | Internet Explorer v 5.5 or later; Mozilla 1.3 or later; Firefox 2.0 or later; NetBotz Advanced View Software; StruxureWare Data Center Expert |
Client System Requirements | Microsoft Windows 7 Pro and Ultimate; Vista Business and Enterprise; XP SP2-3; Red Hat EL4 and EL5 Use of Advanced View interface requires a one-time download of the Sun Java Runtime Environment |
Indicators | Alert; Power; Network Link |
Approvals | CE; UL; c-UL; VDE; IRAM; NOM; GOST; FCC 47 CFR Part 15 Class A; ICES-003 Class A; AS/NZS CISPR 22; VCCI Class A; Low Voltage Directive 2006/95/EC; EMC Directive 2004/108/EC |
Warranty | 2 years repair or replace |
The APC NetBotz Room Monitor 570 (NBRK0570) offers premium security and environmental monitoring over the network. The NetBotz 570 is capable of video surveillance and monitoring to record any human activity. It provides temperature, humidity, door contact, dry contact, 0-5V and 4-20mA sensor ports, vibration, smoke, 2-way audio monitoring, spot leak, rope water leak, and alarm beacon monitoring. Supports up to 4 external camera pods*, 12 sensor pods and up to 78 Universal Sensors - expands from 6 universal sensor ports on the appliance to up to 78 with pod-based expansion. For management of multiple NetBotz appliances, use StruxureWare Data Center Expert.
*Installing four camera pods requires an external USB hub.
Standard Lead Time: Usually in Stock
]]>General
NBRK0250 Includes
APC NetBotz 750 Data Sheet (PDF)
APC NetBotz 750 User Manual (PDF)
NetBotz 750 (NBRK0750) Specifications
Physical Characteristics | |
Height | 1.69 in (4.3 cm) |
Width | 17.01 in (43.2 cm) |
Depth | 7.01 in (17.8 cm) |
Net Weight | 5.40 lb(US) (2.45 kg) |
Mount Position | 1U Rackmount |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 0 - 95% |
Operating Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Connectors and Sensors | |
APC Universal Sensors Supported | Temperature; Temperature / Humidity; Door Contact; Smoke; Fluid Spot Leak; Vibration; Dry Contact |
Warranty | 2 years repair or replace |
Standard Lead Time: Usually in Stock
]]>
NetBotz Surveillance Screen Shot (NBSV1000)
NetBotz Surveillance is ideal for businesses with remote, distributed IT assets that would like to visually capture all activity within an area. NetBotz Surveillance (NBSV1000) customers include end-users from the following industries:
In short, anyone with a remote, distributed IT closet that can't afford the costly repercussions of downtime will benefit from NetBotz Surveillance.
How does NetBotz Surveillance (NBSV1000) work?
NetBotz Surveillance (NBSV1000) allows a user to configure specific cameras to be in "surveillance mode". When in "surveillance mode", the camera captures and records the events and activities within the camera's range of view, and sends the images to NetBotz Central. Alerts are not generated from 'Surveillance Mode" activations, rather pictures are captured and stored for later viewing if needed.
The cameras record events in an area continuously until motion in the camera's field of view stops. The events and captured video data area stored within the clip database on NetBotz Central for easy retrieval and review. For example, if 24 hours of image history is captured and being reviewed, periods of time in which there is no activity may be viewed normally, fast forwarded through, or skipped entirely during the review.
NetBotz Surveillance (NBSV1000) Clip Screen Shot
The Surveillance software (NBSV1000) functions as a database that flexibly and powerfully manages, sorts, and searches the images and clips in any number of ways. Users may define search terms and qualifications to rapidly find clips by camera, date, category, priority, etc, and clips may be defined, tagged, annotated, and assigned a priority level for future review.
The NetBotz Surveillance (NBSV1000) application consists of a standard NetBotz appliance with at least one camera, NetBotz Central (either Standard or Enterprise), and the add-on Surveillance application software. The Surveillance base package can manage 15 nodes (or cameras), and additional Surveillance nodes are available as needed through the purchase of add-on "Surveillance Paks".
NetBotz Surveillance (NBSV1000) provides a powerful and flexible way to ensure the integrity and security of a critical area. Because of the flexibility and power of the NetBotz solution, every application differs in size, scope, and architecture. From monitoring a remote distributed IT closet to providing a redundant security measure within a data center, and everything in between, applications differ with every company and their unique IT environmental monitoring needs. While the applications differ however, the benefits a user receives are many.
Used to connect the Wireless Sensor Pod to a NetBotz 180 Pod appliance when used in Coordinator mode, or to supply USB power when in Router mode.
Standard Lead Time: Usually in Stock
]]>Features
Manageability
Integrated Camera
NBWL0355A Package Contents
APC NetBotz 355 Installation & Configuration Manual (PDF)
NetBotz 355 (NBWL0355A) Specifications
Physical Characteristics | |
Width | 6.69 in. (170mm.) |
Height | 8.27 in. (210mm.) |
Depth | 3.75 in. (95mm.) |
Net Weight | 1.43 lbs (0.65 kg) |
Mount Position | Wall Mount, Ceiling Mount, Enclosure Mount - optional NBAC0301 Mounting Stand |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 0 - 95% |
Operating Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Power | |
Input Voltage, Nominal | Power-over-Ethernet injector power supply - not included - 100–250 VAC in, 48 VDC out |
Maximum Power Consumption | 15 W |
Power Cords | None |
Communications & Management | |
Protocols | DHCP, DNS, HTTP, HTTPS, SMTP, SOCKS, TCP/IP |
Network Interface Connections | RJ-45 10/100 Base-T |
Approvals | AS/NZS 3548 (C-Tick) Class A, CE, FCC Part 15 Class A, ICES-003, Low Voltage Directive 2006/95/EC, VCCI Class A |
Warranty | 2 years repair or replace |
Formerly the NBWL0355
]]>APC NetBotz Room Monitor 355 functions as the central hardware appliance for a NetBotz security and environmental monitoring system. The NetBotz 355 can be installed anywhere in a room and includes an integrated camera and internal sensors that monitor temperature, humidity, dew point, air flow, and motion. It also includes four sensor ports for connecting temperature, humidity, smoke, door, vibration, spot fluid, and third-party dry contact and 0–5 V sensors.
Note: Power-Over-Ethernet - PoE Injector is required for operation but not included; see NBWL0356 for model with Injector
Standard Lead Time: Usually Ships within 2 Weeks
]]>Features
Manageability
Integrated Camera
NBWL0356A Package Contents
APC NetBotz 355 Installation & Configuration Manual (PDF)
NetBotz 355 with Injector (NBWL0356A) Specifications
Physical Characteristics | |
Width | 6.69 in. (170mm.) |
Height | 8.27 in. (210mm.) |
Depth | 3.75 in. (95mm.) |
Net Weight | 1.43 lbs (0.65 kg) |
Mount Position | Wall Mount, Ceiling Mount, Enclosure Mount - optional NBAC0301 Mounting Stand |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 0 - 95% |
Operating Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Power | |
Input Voltage, Nominal | Power-over-Ethernet injector power supply (100–250 VAC in, 48 VDC out) |
Maximum Power Consumption | 15 W |
Power Cords | - 1.8 m (6 ft) Black, C14 to C13, RoHS Compliant (included) - 1.8 m (6 ft) Black, NEMA 5-15P to C13, #14 AWG cord, RoHS Compliant (Included) |
Communications & Management | |
Protocols | DHCP, DNS, HTTP, HTTPS, SMTP, SOCKS, TCP/IP |
Network Interface Connections | RJ-45 10/100 Base-T |
Approvals | AS/NZS 3548 (C-Tick) Class A, CE, FCC Part 15 Class A, ICES-003, Low Voltage Directive 2006/95/EC, VCCI Class A |
Warranty | 2 years repair or replace |
Formerly the NBWL0356
]]>APC NetBotz Room Monitor 355 (with PoE Injector) functions as the central hardware appliance for a NetBotz security and environmental monitoring system. The NetBotz 355 can be installed anywhere in a room and includes an integrated camera and internal sensors that monitor temperature, humidity, dew point, air flow, and motion. It also includes four sensor ports for connecting temperature, humidity, smoke, door, vibration, spot fluid, and third-party dry contact and 0–5 V sensors.
Standard Lead Time: Usually Ships within 2 Weeks
]]>Features
Manageability
Sensors
Integrated Camera
NBWL0455A Includes
APC NetBotz 455 Installation & Configuration Manual (PDF)
NetBotz 455 (NBWL0455A) Specifications
Physical Characteristics | |
Height | 8.27 in. (210mm.) |
Width | 6.69 in. (170mm.) |
Depth | 3.74 in. (95mm.) |
Net Weight | 1.43 lbs (0.65 kg) |
Mount Position | Wall Mount, Ceiling Mount, Enclosure Mount |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 10 - 95% |
Operating Humidity | 10 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Power | |
Input Voltage, Nominal | Power-over-Ethernet injector power supply - not included - 100–240 VAC |
Power Cords | None |
Connections, Sensors & Cameras | |
Integrated Camera | Images up to 1280x1024 resolution, 24-bit color, and up to 30 frames per second (fps) |
External Cameras Supported | NetBotz Camera Pod 160, Pelco IP Camera Families: Sarix, Spectra IV IP, Spectra Mini IP, IP110 Camclosure, IP3701, and CCTV Cameras integrated through the NetBotz CCTV Adapter Pod |
Integrated Sensors | Temp, Airflow, Humidity, Dew Point (calculated), Camera Motion Sensor |
APC Universal Sensors Supported | Temp, Temp / Humidity, Door Contact, Smoke, Spot Leak, Vibration, Dry Contact, 0-5V |
Sensors and Pods Supported | Room Sensor Pod 155(NBPD0155), Rack Sensor Pod 150 (NBPD0150), Wireless Sensor Pod 180 (NBPD0180) Rack Access Pod 170 (NBPD0171 & NBPD0172) |
Connectors | Ethernet: (1) 10/100 Base-T Ethernet Port (PoE capable), (4) APC Universal Sensor Ports, (1) USB Configuration Port – Style B, (1) USB Port – Style A, (1) Microphone Jack, (1) Speaker Jack, (1) A-Link Port. |
Communications & Management | |
Protocols | TCP/IP, HTTP, HTTPS, SMTP, SNMP v1, v2c, and v3, DHCP, DNS, Socks v4 or V5 Proxy Server, A-Link |
Network Interface Connections | RJ-45 10/100 Base-T |
Management Interface | Internet Explorer v 5.5 or later; Mozilla 1.3 or later; Firefox 2.0 or later; NetBotz Advanced View Software; StruxureWare Data Center Expert |
Client System Requirements | Microsoft Windows 7 Pro and Ultimate; Vista Business and Enterprise; XP SP2-3; Red Hat EL4 and EL5 Use of Advanced View interface requires a one-time download of the Sun Java Runtime Environment |
Indicators | Alert, Power, Camera, Network Link, Temperature Display |
Approvals | CE; FCC 47 CFR Part 15 Class A, ICES-003 Class A, AS/NZS CISPR 22, VCCI Class A, Low Voltage Directive 2006/95/EC, EMC Directive 204/108/EC NBWL0456 Only: UL, c-UL, GS-ul, IRAM, NOM, GOST, PSE; |
Warranty | 2 years repair or replace |
Formerly the NBWL0455
]]>The APC NetBotz Room Monitor 455 functions as the central hardware appliance for high performance security and environmental monitoring. The NetBotz 455 can be installed anywhere in a room and includes an integrated camera and internal sensors that monitor temperature, humidity, air flow, dew point, and camera motion. It also includes four sensor ports for connecting temperature, humidity, smoke, door, vibration, spot fluid, and third-party dry contact and 0–5 V sensors. Plus, it supports two-way audio, audio sensing, and audio recording. You can increase the space monitored by adding up to two NetBotz sensor pods - supports 3 additional external cameras pods, 2 sensor pods / up to 16 Universal Sensors.
Note: Power-Over-Ethernet - PoE Injector is required for operation but not included; see NBWL0456 for model with Injector
Standard Lead Time: Usually Ships within 2 Weeks
]]>Features
Manageability
Sensors
Integrated Camera
NBWL0456A Package Contents
APC NetBotz 455 Installation & Configuration Manual (PDF)
NetBotz 455 (NBWL0456A) Specifications
Physical Characteristics | |
Height | 8.27 in. (210mm.) |
Width | 6.69 in. (170mm.) |
Depth | 3.74 in. (95mm.) |
Net Weight | 1.43 lbs (0.65 kg) |
Mount Position | Wall Mount, Ceiling Mount, Enclosure Mount |
Environmental | |
Storage Temperature | 5 - 149 °F (-15 - 65 °C) |
Operating Temperature | 32 - 113 °F (0 - 45 °C) |
Storage Humidity | 10 - 95% |
Operating Humidity | 10 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Operation Elevation | 0-10000 feet (0-3000 meters) |
Power | |
Input Voltage, Nominal | Power-over-Ethernet injector power supply - 100–240 VAC |
Power Cords | 1 x 1.8 m (6-ft) NEMA 5-15P to C13 power cord 1 x 1.8 m (6-ft) C13 to C14 power cord |
Connections, Sensors & Cameras | |
Integrated Camera | Images up to 1280x1024 resolution, 24-bit color, and up to 30 frames per second (fps) |
External Cameras Supported | NetBotz Camera Pod 160, Pelco IP Camera Families: Sarix, Spectra IV IP, Spectra Mini IP, IP110 Camclosure, IP3701, and CCTV Cameras integrated through the NetBotz CCTV Adapter Pod |
Integrated Sensors | Temp, Airflow, Humidity, Dew Point (calculated), Camera Motion Sensor |
APC Universal Sensors Supported | Temp, Temp / Humidity, Door Contact, Smoke, Spot Leak, Vibration, Dry Contact, 0-5V |
Sensors and Pods Supported | Room Sensor Pod 155(NBPD0155), Rack Sensor Pod 150 (NBPD0150), Wireless Sensor Pod 180 (NBPD0180) Rack Access Pod 170 (NBPD0171 & NBPD0172) |
Connectors | Ethernet: (1) 10/100 Base-T Ethernet Port (PoE capable), (4) APC Universal Sensor Ports, (1) USB Configuration Port – Style B, (1) USB Port – Style A, (1) Microphone Jack, (1) Speaker Jack, (1) A-Link Port. |
Communications & Management | |
Protocols | TCP/IP, HTTP, HTTPS, SMTP, SNMP v1, v2c, and v3, DHCP, DNS, Socks v4 or V5 Proxy Server, A-Link |
Network Interface Connections | RJ-45 10/100 Base-T |
Management Interface | Internet Explorer v 5.5 or later; Mozilla 1.3 or later; Firefox 2.0 or later; NetBotz Advanced View Software; StruxureWare Data Center Expert |
Client System Requirements | Microsoft Windows 7 Pro and Ultimate; Vista Business and Enterprise; XP SP2-3; Red Hat EL4 and EL5 Use of Advanced View interface requires a one-time download of the Sun Java Runtime Environment |
Indicators | Alert, Power, Camera, Network Link, Temperature Display |
Approvals | CE; FCC 47 CFR Part 15 Class A, ICES-003 Class A, AS/NZS CISPR 22, VCCI Class A, Low Voltage Directive 2006/95/EC, EMC Directive 204/108/EC NBWL0456A Only: UL, c-UL, GS-ul, IRAM, NOM, GOST, PSE; |
Warranty | 2 years repair or replace |
Formerly the NBWL0456
]]>The APC NetBotz Room Monitor 455 (with PoE Injector) functions as the central hardware appliance for high performance security and environmental monitoring. The NetBotz 455 can be installed anywhere in a room and includes an integrated camera and internal sensors that monitor temperature, humidity, air flow, dew point, and camera motion. It also includes four sensor ports for connecting temperature, humidity, smoke, door, vibration, spot fluid, and third-party dry contact and 0–5 V sensors. Plus, it supports two-way audio, audio sensing, and audio recording. You can increase the space monitored by adding up to two NetBotz sensor pods - supports 3 additional external cameras pods, 2 sensor pods / up to 16 Universal Sensors.
Standard Lead Time: Usually Ships within 2 Weeks
]]>NetBotz WallBotz 500 Features
NetBotz Room Monitor 756 Features
NBWL0756 Manageability
Integrated Camera
NBWL0756 Package Contents
APC NetBotz 755/756 Installation & Quck Start Manual (PDF)
APC NetBotz Room Monitor 756 (NBWL0756) Specifications
Physical Characteristics | |
Width | 12.6 in. (320.04mm.) |
Height | 4.6 in. (116.84mm.) |
Length | 21.1 in. (535.94mm.) |
Net Weight | 3.44 lbs (1.56 kg) |
Environmental | |
Storage Temperature | -5 to 55°C (23 to 131°F) |
Operating Temperature | 0 to 40°C (32 to 104°F) |
Storage Humidity | 0 to 95%, non-condensing |
Operating Humidity | 0 to 95%, non-condensing |
Storage Elevation | 0 to 4 572 m (0 to 15,000 ft) |
Operation Elevation | 0 to 3000 m (0 to 10,000 ft) |
Power | |
Input Voltage, Nominal | 48 VDC |
Maximum Total Current Draw | 640 mA |
Communications & Management | |
Protocols | AES-128: More secure than DES. Uses a 128-bit key to encrypt data. DES: Less secure than AES. Uses a 56-bit key. |
Approvals | FCC 47 CFR PART 15 CLASS A, ICES ICES-003:2012 CLASS A, EMC 2014/30/EU, CISPR 22, V-3:2015 |
Warranty | 2 years repair or replace |
Standard Lead Time: Usually Ships within 2 Weeks
]]>Standard Lead Time: Usually in Stock
]]>Standard Lead Time: Usually in Stock
]]>NetBotz Room Monitor 755 Features
NBWL0755 Manageability
Integrated Camera
NBWL0755 Package Contents
APC NetBotz 755 Installation & Quck Start Manual (PDF)
APC NetBotz Room Monitor 755 (NBWL0755) Specifications
Physical Characteristics | |
Width | 12.6 in. (320.04mm.) |
Height | 4.6 in. (116.84mm.) |
Length | 21.1 in. (535.94mm.) |
Net Weight | 3.44 lbs (1.56 kg) |
Environmental | |
Storage Temperature | -5 to 55°C (23 to 131°F) |
Operating Temperature | 0 to 40°C (32 to 104°F) |
Storage Humidity | 0 to 95%, non-condensing |
Operating Humidity | 0 to 95%, non-condensing |
Storage Elevation | 0 to 4 572 m (0 to 15,000 ft) |
Operation Elevation | 0 to 3000 m (0 to 10,000 ft) |
Power | |
Input Voltage, Nominal | 48 VDC |
Maximum Total Current Draw | 640 mA |
Communications & Management | |
Protocols | AES-128: More secure than DES. Uses a 128-bit key to encrypt data. DES: Less secure than AES. Uses a 56-bit key. |
Approvals | FCC 47 CFR PART 15 CLASS A, ICES ICES-003:2012 CLASS A, EMC 2014/30/EU, CISPR 22, V-3:2015 |
Warranty | 2 years repair or replace |
Standard Lead Time: Usually Ships within 2 Weeks
]]>APC Relay Racks | Height | Depth* | Rails | Width* |
APC NetShelter AR201 | 48U | 14.8" | 19" EIA | 20.2" |
Mechanical | |
Height | 78.40 inches (1991 mm) |
Width | 23.62 inches (600 mm) |
Depth | 42.13 inches (1070 mm) |
Net Depth with Stabilizing Feet | 50.30 inches (1277 mm) |
Net Weight | 637.60 lbs. (289.82 kg) |
Weight Capacity (static load) | 3000.00 lbs. (1363.64 kg) |
Weight Capacity (dynamic load) | 2250.00 lbs. (1022.73 kg) |
Rack Height | 42U |
Rack Free Space | 33U |
Number of racks | 1 |
Color | Black |
Output | |
Configured Power | 8000 Watts / 10 kVA |
Nominal Output Voltage | 208V |
PDU Type | Metered |
Bypass | Internal Bypass (Automatic and Manual) |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 |
Crest Factor | 3 : 1 |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 3-wire (2PH + G) (23) NEMA 5-20R (3) NEMA L5-20R (2) NEMA L6-20R (1) NEMA L6-30R |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 5 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 280V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Battery Volt-Amp-Hour Capacity | 1770 |
Typical recharge time | 2.20 hour(s) |
RBC Quantity | 2 |
Communications & Management | |
Control panel | Multi-function LCD status and control console,Network link status LED |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Pre-Installed SmartSlot Cards | AP9619 |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 2216.00 BTU/hr |
The APC NetShelter SX ISXT110KVM1RSX is an InfraStruXure System Fully Integrated and Assembled with 10kVA Smart UPS RT. This NetShelter SX single rack InfraStruXure system ships factory assembled, wired, and tested - ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.
Includes: Documentation CD, User Manual, Web/SNMP Management Card
Standard Lead Time: Usually Ships within 2 Weeks
Additional specifications are below.
]]>Mechanical | |
Height | 78.40 inches (1991 mm) |
Width | 23.62 inches (600 mm) |
Depth | 42.13 inches (1070 mm) |
Net Depth with Stabilizing Feet | 50.30 inches (1277 mm) |
Net Weight | 936.95 lbs. (425.89 kg) |
Weight Capacity (static load) | 3000.00 lbs. (1363.64 kg) |
Weight Capacity (dynamic load) | 2250.00 lbs. (1022.73 kg) |
Rack Height | 42U |
Rack Free Space | 23U |
Number of racks | 1 |
Color | Black |
Output | |
Configured Power | 12.8 kW / 16 kVA |
Max Configured Power | 12.8 kW / 16 kVA |
Nominal Output Voltage | 120V, 208V |
PDU Type | Metered |
Bypass | Internal Bypass (Automatic and Manual) |
Output Frequency (sync to mains) | 60Hz +/- 0.1% for 60Hz nominal,50Hz +/- 0.1% for 50Hz nominal |
Crest Factor | up to 5 : 1 |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 4-wire (2PH + N +G) (23) NEMA 5-20R (4) NEMA L14-30R (7) NEMA L5-20R |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 45 - 65 Hz |
Input Connections | Hard Wire 4-wire (2PH+N+G) |
Input voltage range for main operations | 155 - 276V |
Input Power Factor at Full Load | 0.98 |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Battery Volt-Amp-Hour Capacity | 3456 |
Typical recharge time | 3 hour(s) |
Communications & Management | |
Control panel | Multi-function LCD status and control console, Network link status LED |
Audible Alarm | Audible and visible alarms prioritized by severity |
Pre-Installed SmartSlot Cards | AP9619 |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 62.00 dBA |
Online Thermal Dissipation | 4995.00 BTU/hr |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,EIA-310-D,FCC Part 15 Class A,ICES-003,Industry Canada,UL 1778,UL 60950,UL Listed |
The APC NetShelter SX ISXT216KPS1RSX is an InfraStruXure System Fully Integrated and Assembled with 16kVA Symmetra LX . This NetShelter SX single rack InfraStruXure system ships factory assembled, wired, and tested - ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.
Includes: Documentation CD, User Manual, Web/SNMP Management Card
Standard Lead Time: Usually Ships within 2 Weeks
Mechanical | |
Height | 78.40 inches (1991 mm) |
Width | 23.62 inches (600 mm) |
Depth | 42.13 inches (1070 mm) |
Net Depth with Stabilizing Feet | 50.30 inches (1277 mm) |
Net Weight | 513.60 lbs. (233.45 kg) |
Weight Capacity (static load) | 3000.00 lbs. (1363.64 kg) |
Weight Capacity (dynamic load) | 2250.00 lbs. (1022.73 kg) |
Rack Height | 42U |
Rack Free Space | 36U |
Number of racks | 1 |
Color | Black |
Output | |
Configured Power | 3500 Watts / 5000 VA |
Nominal Output Voltage | 208V |
PDU Type | Metered |
Bypass | Internal Bypass (Automatic and Manual) |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 |
Crest Factor | 3 : 1 |
Waveform Type | Sine wave |
Output Connections | (23) NEMA 5-20R (3) NEMA L5-20R (2) NEMA L6-20R (1) NEMA L6-30R |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 5 Hz (auto sensing) |
Input Connections | NEMA L6-30P |
Cord Length | 10 feet (3.05 meters) |
Input voltage range for main operations | 160 - 280V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Battery Volt-Amp-Hour Capacity | 855 |
Typical recharge time | 2.50 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Control panel | Multi-function LCD status and control console, Network link status LED |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Pre-Installed SmartSlot Cards | AP9619 |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1040.00 BTU/hr |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,EIA-310-D,FCC Part 15 Class A,ICES-003,Industry Canada,UL 1778,UL 60950,UL Listed |
The APC NetShelter SX ISXT15KVM1RSX is an InfraStruXure System Fully Integrated and Assembled with 5kVA Smart UPS RT . This NetShelter SX single rack InfraStruXure system ships factory assembled, wired, and tested - ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.
Includes: Documentation CD, User Manual, Web/SNMP Management Card
Standard Lead Time: Usually Ships within 2 Weeks
Additional specifications are below.
]]>Mechanical | |
Height | 78.40 inches (1991 mm) |
Width | 23.62 inches (600 mm) |
Depth | 42.14 inches (1070 mm) |
Net Depth with Stabilizing Feet | 50.30 inches (1277 mm) |
Net Weight | 637.60 lbs. (289.82 kg) |
Weight Capacity (static load) | 3000.00 lbs. (1363.64 kg) |
Weight Capacity (dynamic load) | 2250.00 lbs. (1022.73 kg) |
Rack Height | 42U |
Rack Free Space | 33U |
Number of racks | 1 |
Color | Black |
Output | |
Configured Power | 6400 Watts / 8000 VA |
Nominal Output Voltage | 208V |
PDU Type | Metered |
Bypass | Internal Bypass (Automatic and Manual) |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 |
Crest Factor | 3 : 1 |
Waveform Type | Sine wave |
Output Connections | (23) NEMA 5-20R (3) NEMA L5-20R (2) NEMA L6-20R (1) NEMA L6-30R |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 5 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 280V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Battery Volt-Amp-Hour Capacity | 1770 |
Typical recharge time | 2.50 hour(s) |
RBC Quantity | 2 |
Communications & Management | |
Control panel | Multi-function LCD status and control console, Network link status LED |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Pre-Installed SmartSlot Cards | AP9619 |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1535.00 BTU/hr |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,EIA-310-D,FCC Part 15 Class A,ICES-003,Industry Canada,UL 1778,UL 60950,UL Listed |
The APC NetShelter SX ISXT18KVM1RSX is an InfraStruXure System Fully Integrated and Assembled with 8kVA Smart-UPS RT 230V. This NetShelter SX single rack InfraStruXure system ships factory assembled, wired, and tested - ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.
Includes: Documentation CD, User Manual, Web/SNMP Management Card
Standard Lead Time: Usually Ships within 2 Weeks
Additional specifications are below.
]]>Mechanical | |
Height | 78.40 inches (1991 mm) |
Width | 23.62 inches (600 mm) |
Depth | 42.13 inches (1070 mm) |
Net Depth with Stabilizing Feet | 50.30 inches (1277 mm) |
Net Weight | 709.95 lbs. (322.70 kg) |
Weight Capacity (static load) | 3000.00 lbs. (1363.64 kg) |
Weight Capacity (dynamic load) | 2250.00 lbs. (1022.73 kg) |
Rack Height | 42U |
Rack Free Space | 23U |
Number of racks | 1 |
Color | Black |
Output | |
Configured Power | 6400 Watts / 8000 VA |
Max Configured Power | 12.8 kW / 16 kVA |
Nominal Output Voltage | 120V, 208V |
PDU Type | Metered |
Bypass | Internal Bypass (Automatic and Manual) |
Output Frequency (sync to mains) | 47 - 63 Hz |
Output Frequency (not synced) | 60Hz +/- 0.1% for 60Hz nominal,50Hz +/- 0.1% for 50Hz nominal |
Crest Factor | up to 5 : 1 |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 4-wire (2PH + N +G) (23) NEMA 5-20R (4) NEMA L14-30R (7) NEMA L5-20R |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 45 - 65 Hz |
Input Connections | Hard Wire 4-wire (2PH+N+G) |
Input voltage range for main operations | 155 - 276V |
Input Power Factor at Full Load | 0.98 |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Battery Volt-Amp-Hour Capacity | 1728 |
Typical recharge time | 3 hour(s) |
Communications & Management | |
Control panel | Multi-function LCD status and control console, Network link status LED |
Audible Alarm | Audible and visible alarms prioritized by severity |
Pre-Installed SmartSlot Cards | AP9619 |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0% |
Storage Elevation | 0-15000 feet (0-4500 meters) |
Audible noise at 1 meter from surface of unit | 62.00 dBA |
Online Thermal Dissipation | 4995.00 BTU/hr |
Conformance | |
Regulatory Approvals | cUL Listed,CSA,EIA-310-D,FCC Part 15 Class A,ICES-003,Industry Canada,UL 1778,UL 60950,UL Listed |
The APC NetShelter SX ISXT28KPS1RSX is an InfraStruXure System Fully Integrated and Assembled with 8kVA Symmetra LX . This NetShelter SX single rack InfraStruXure system ships factory assembled, wired, and tested - ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.
Includes: Documentation CD, User Manual, Web/SNMP Management Card
Standard Lead Time: Usually Ships within 2 Weeks
APC Netshelter Description: Rack enclosure with optional advanced cooling, power distribution, and cable management for server and networking applications in IT environments.
APC Netshelter Features: Adjustable mounting depth, Guaranteed Compatability, Lockable doors and side panels, Multi-vendor equipment compatibility, Numbered U positions, Optimized depth, Optimized width, Powder coat paint finish, Protective grounding provisions, Quick release doors, Quick release side panels, Rear Cable Management channels, Reversible doors, Rolls through a 7 foot doorway, Roof and base cable access, Ships fully assembled, Split rear doors, UBC Zone 4 stabilization provisions.
APC Netshelter Includes: Casters, Doors, Key(s), Leveling feet, Roof, Side panels, User Manual
]]>Net weight | 359 lbs. ( 163 kg ) |
Maximum height dimensions | 81.50 inches ( 207.01 cm ) |
Maximum width dimensions | 23.50 inches ( 59.69 cm ) |
Maximum depth dimensions | 42.20 inches ( 107.19 cm ) |
Shipping Weight | 397 lbs. ( 180 kg ) |
Shipping Height | 87 inches ( 221 cm ) |
Shipping Width | 29.50 inches ( 74.93 cm ) |
Shipping Depth | 47.50 inches ( 120.65 cm ) |
Weight Capacity (static load) | 2,000 ( 907 ) |
Weight Capacity (dynamic load) | 2,000 |
Rack Height | 42 U |
Color | Beige |
Units per Pallet | 1 |
Metal Thickness | 16 |
Front Door | 16 |
Rear Door | 16 |
Roof | 18 |
EIA Mounting Rails | 14 |
Side Panels | 20 |
Description: Rack enclosure with optional advanced cooling, power distribution, and cable management for server and networking applications in IT environments.
Features: Adjustable mounting depth, Guaranteed Compatability, Lockable doors and side panels, Multi-vendor equipment compatibility, Numbered U positions, Optimized depth, Optimized width, Powder coat paint finish, Protective grounding provisions, Quick release doors, Quick release side panels, Rear Cable Management channels, Reversible doors, Rolls through a 7 foot doorway, Roof and base cable access, Ships fully assembled, Split rear doors, UBC Zone 4 stabilization provisions
Includes: Casters, Doors, Key(s), Leveling feet, Roof, Side panels, User Manual
]]>Includes: Installation guide, User Manual
Standard Lead Time: Usually Ships within 3 Weeks
APC PDRDPF10U-R Features:
APC Power Distribution Unit Detail Image
Specifications:
Model | Information |
Rack PDU, Basic, Zero U, 15A, 100/120V, (14) 5-15; 5-15P | APC Basic Rack PDU , Input: 100V, 120V , Input Connections: NEMA 5-15P , Cord Length: 12 feet ( 3.66 meters ) , Output: 100V, 120V , Output Connections: NEMA 5-15R Includes: Installation Guide, Rack Mounting Brackets, Toolless Mounting Kit |
Rack PDU, Basic, Zero U, 20A, 120V, (24)5-20; L5-20P (Twist lock plug) | APC Basic Rack PDU , Input: 120V , Input Connections: NEMA L5-20P , Cord Length: 10 feet (3.05 meters), Output: 120V , Output Connections: NEMA 5-20R Includes: Cord Retention Bracket(s), Installation Guide, Rack Mounting Brackets, User Manual |
Rack PDU, Basic, 1U, 15A, 120V, (10)5-15; 5-15P | APC Basic Rack PDU , Input: 120V , Input Connections: NEMA 5-15P , Cord Length: 12 feet ( 3.66 meters ) , Output: 120V , Output Connections: NEMA 5-15R Includes: Installation Guide, Rack Mounting Brackets |
Rack PDU, Basic, 1U, 20A, 120V, (10)5-20; L5-20P (Twist lock plug) | APC Basic Rack PDU , Input: 120V , Input Connections: NEMA L5-20P , Cord Length: 12 feet ( 3.66 meters ) , Output: 120V , Output Connections: NEMA 5-20R Includes: Installation Guide, Rack Mounting Brackets |
Rack PDU, Metered, Zero U, 15A, 100/120V, (16) 5-15; 5-15P | APC Metered Rack PDU , Input: 120V , Input Connections: NEMA 5-15P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-15R Includes: Cord Retention Bracket(s), Installation Guide, Rack Mounting Brackets, Toolless Mounting Kit, User Manual |
Rack PDU, Metered, Zero U, 20A, 120V, (24) NEMA 5-20R, L5-20P (Twist lock plug) | APC Metered Rack PDU , Input: 120V , Input Connections: NEMA L5-20P , Cord Length: 10 feet ( 3.05 meters ) , Output: 120V , Output Connections: NEMA 5-20R Includes: Cord Retention Bracket(s), Installation Guide, Rack Mounting Brackets, User Manual |
Includes: User manual
APC PVR Features:
Specifications:
APC RACSC201 Specifications:
Mechanical | |
Height | 78.40 in. (1991 mm.) |
Width | 47.24 in. (1200 mm.) |
Depth | 50.13 in. (1273 mm.) |
Weight | 1120.90 lbs. (509.50 kg.) |
Color | Black |
Environmental | |
Audible noise at 1 meter from surface of unit | 80.00 dBA |
General | |
Cooling Options | Air-cooled Self-contained |
Compressor Type | Rotary |
Air Discharge Patterns | Horizontal |
Intake Air | Rear Return |
Refrigerant | R410A |
Refrigerant Charge | 3 pounds |
Air Flow | 1200 CFM |
Condensate Pump Capacity | 1.30 gal/hour |
Amp Draw Nominal | 16A |
Amp Draw In-Rush | 56 |
Input | |
Input Power | 2940 Watts |
Input Frequency | 60 Hz |
Rack Height | 42U |
Input Connections | NEMA L6-20P |
Communications & Management | |
Control panel | Multi-function LCD status and control console |
The APC InRow SC RACSC201 System is 2 InRow SC units, 1 NetShelter SX Rack 600mm, and Rear Containment which is a rapidly deployable, self-contained row-based cooling solutions for server rooms and wiring closets.
Includes:
NOTE: Special Order - Call for Quoted Lead Times
APC RACSC201 Features:
Mechanical | |
Height | 17.01inches (432MM, 43.2CM) |
Width | 3.5inches (89MM, 8.9CM) |
Depth | 19.29inches (490MM, 49.0CM) |
Weight | 50.4lbs. (22.86KG) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 82.0BTU/hr |
Output | |
Output Power Capacity | 900 Watts / 1.0kVA |
Max Configurable Power | 1.0kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.9% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 82 - 143V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | Smart UPS signalling RS-232 cable, USB cable |
Control panel | Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 600 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CUL listed, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: Cat 5 Ethernet cable, Installation guide, Rack mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, USB cable.
]]>Mechanical | |
Height | 3.5inches (89MM, 8.9CM) |
Width | 17.01inches (432MM, 43.2CM) |
Depth | 19.29inches (490MM, 49.0CM) |
Weight | 54.72lbs. (24.82KG) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 133.0BTU/hr |
Output | |
Output Power Capacity | 1.35kWatts / 1.44kVA |
Max Configurable Power | 1.44kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.7% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 143V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | Smart UPS signalling RS-232 cable, USB cable |
Control panel | Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CUL listed, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: Cat 5 Ethernet cable, Installation guide, Rack mounting hardware, Rack mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable.
]]>Mechanical | |
Height | 3.5inches (89MM, 8.9CM) |
Width | 17.01inches (432MM, 43.2CM) |
Depth | 19.29inches (490MM, 49.0CM) |
Weight | 54.72lbs. (24.82KG) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 133.0BTU/hr |
Output | |
Output Power Capacity | 1.35kWatts / 1.44kVA |
Max Configurable Power | 1.44kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.7% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 143V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | Smart UPS signalling RS-232 cable, USB cable |
Control panel | Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 600 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CUL listed, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: Cat 5 Ethernet cable, Installation guide, Rack mounting hardware, Rack mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable.
]]>Mechanical | |
Height | 3.35inches (85MM, 8.5CM) |
Width | 17.01inches (432MM, 43.2CM) |
Depth | 26.26inches (667MM, 66.7CM) |
Weight | 84.77lbs. (38.45KG) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 203.0BTU/hr |
Output | |
Output Power Capacity | 1.8kWatts / 1.92kVA |
Max Configurable Power | 1.92kVA |
Nominal Output Voltage | 100-127V |
Efficiency at Full Load | 97.8% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | |
Input | |
Nominal Input Voltage | 100-127V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-20P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 70 - 153, 75 - 154 Adjustable V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 Serial, Smart-Slot, USB |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays. |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI, CSA, EN 50091-2, EN 55022 class A, FCC part 15 class A, NOM, TAA compliance , TÜV, UL 1778, VCCI class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Network management card, Rack mounting brackets, Rack mounting hardware, Rack mounting support.
]]>Mechanical | |
Height | 17.01inches (432MM, 43.2CM) |
Width | 7.01inches (178MM, 17.8CM) |
Depth | 19.02inches (483MM, 48.3CM) |
Weight | 85.19lbs. (38.64KG) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 184.0BTU/hr |
Output | |
Output Power Capacity | 2.7kWatts / 3.0kVA |
Max Configurable Power | 3.0kVA |
Nominal Output Voltage | 208V |
Efficiency at Full Load | 98.2% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L6-20P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 141 - 255, 160 - 280V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays. |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | C-Tick, CE, CSA, EN 50091-1, EN 50091-2, EN 60950, FCC part 15 class A, GOST, IRAM, TAA compliance , UL 1778, VDE, RoHS compliant |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
The APC Smart-UPS are intelligent and efficient network power protection from entry-level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, and other network devices.
Includes: CD with software, Documentation CD, Rack mounting brackets, Smart UPS signalling RS-232 cable, USB cable, User manual.
]]>Mechanical | |
Height | 17.01inches (432MM, 43.2CM) |
Width | 7.01inches (178MM, 17.8CM) |
Depth | 19.02inches (483MM, 48.3CM) |
Weight | 85.19lbs. (38.64KG) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 276.0BTU/hr |
Output | |
Output Power Capacity | 2.7kWatts / 2.88kVA |
Max Configurable Power | 2.88kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.0% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 70 - 153V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 Serial, SmartSlot, USB |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays. |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI, CSA, EN 50091-2, EN 55022 class A, FCC part 15 class A, NOM, TÜV, UL 1778, VCCI class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery, optional on-site warranties available, optional extended warranties available |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry-level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Rack mounting hardware, Rack mounting support rails, Removable support.
]]>Mechanical | |
Height | 17.01inches (432MM, 43.2CM) |
Width | 7.01inches (178MM, 17.8CM) |
Depth | 19.02inches (483MM, 48.3CM) |
Weight | 85.19lbs. (38.64KG) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 276.0BTU/hr |
Output | |
Output Power Capacity | 2.7kWatts / 2.88kVA |
Max Configurable Power | 2.88kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.0% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 70 - 153V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 Serial, SmartSlot, USB |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays. |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI, CSA, EN 50091-2, EN 55022 class A, FCC part 15 class A, NOM, TÜV, UL 1778, VCCI class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery, optional extended warranties available, optional on-site warranties available |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry-level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Rack mounting hardware, Rack mounting support rails, Removable support.
]]>Mechanical | |
Height | 17.01inches (432MM, 43.2CM) |
Width | 7.01inches (178MM, 17.8CM) |
Depth | 19.02inches (483MM, 48.3CM) |
Weight | 85.19lbs. (38.64KG) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 276.0BTU/hr |
Output | |
Output Power Capacity | 2.7kWatts / 2.88kVA |
Max Configurable Power | 2.88kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.0% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 70 - 153V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays. |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI, CSA, EN 50091-2, EN 55022 class A, FCC part 15 class A, NOM, TAA compliance , TÜV, UL 1778, VCCI class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery, optional extended warranties available, optional on-site warranties available. |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry-level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Rack mounting hardware, Rack mounting support rails, Removable support.
]]>Mechanical | |
Height | 17.01inches (432MM, 43.2CM) |
Width | 7.01inches (178MM, 17.8CM) |
Depth | 19.02inches (483MM, 48.3CM) |
Weight | 85.19lbs. (38.64KG) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 276.0BTU/hr |
Output | |
Output Power Capacity | 2.7kWatts / 2.88kVA |
Max Configurable Power | 2.88kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.0% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 70 - 153V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays. |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI, CSA, EN 50091-2, EN 55022 class A, FCC part 15 class A, NOM, TAA compliance , TÜV, UL 1778, VCCI class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery, optional on-site warranties available, optional extended warranties available. |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry-level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Rack mounting hardware, Rack mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable.
]]>Mechanical | |
Height | 3.35inches (85MM, 8.5CM) |
Width | 17.01inches (432MM, 43.2CM) |
Depth | 26.26inches (667MM, 66.7CM) |
Weight | 84.77lbs. (38.45KG) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | -15 - 45 °C |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 276.0BTU/hr |
Output | |
Output Power Capacity | 2.7kWatts / 2.88kVA |
Max Configurable Power | 2.88kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.0% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 70 - 153V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays. |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI, CSA, EN 50091-2, EN 55022 class A, FCC part 15 class A, NOM, TAA compliance , TÜV, UL 1778, VCCI class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery, optional on-site warranties available, optional extended warranties available. |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS are intelligent and efficient network power protection from entry-level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Rack mounting hardware, Rack mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable.
]]>Mechanical | |
Height | 3.35inches (85MM, 8.5CM) |
Width | 17.01inches (432MM, 43.2CM) |
Depth | 26.26inches (667MM, 66.7CM) |
Weight | 84.77lbs. (38.45KG) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 276.0BTU/hr |
Output | |
Output Power Capacity | 2700 Watts / 2880VA |
Max Configurable Power | 2700 Watts / 2880VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.0% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (3) NEMA 5-20R (Battery Backup) (1) NEMA L5-30R (Battery Backup) (3) NEMA 5-15R (Battery Backup) |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8.01ft (2.4meters) |
Input voltage range for main operations | 70 - 153V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot,USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | LED status display with on line : on battery : replace battery and overload indicators, Multifunction LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI, CSA, EN 50091-2, EN 55022 class A, FCC part 15 class A, NOM, TAA compliance , TÜV, UL 1778, VCCI class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS Compliant |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Rack mounting hardware, Rack mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable, Web/SNMP management card
]]>Mechanical | |
Height | 17.01 in (43.2 cm) |
Width | 3.50 in (8.9 cm) |
Depth | 19.29 in (49 cm) |
Weight | 48.61 lb(US) (22.05 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 69.0BTU/hr |
Output | |
Output Power Capacity | 600 Watts / 750VA |
Max Configurable Power | 750 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 97.8% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 143V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | 0 |
Available SmartSlot™ Interface Quantity | 1 Network management card |
Control panel | Multifunction LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CUL Listed |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | UL 1778 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, USB cable, Web/SNMP management card.
]]>Mechanical | |
Height | 17.01 in (43.2 cm) |
Width | 3.50 in (8.9 cm) |
Depth | 19.29 in (49 cm) |
Weight | 48.61 lb(US) (22.05 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 69.0BTU/hr |
Output | |
Output Power Capacity | 675 Watts / 750VA |
Max Configurable Power | 2700 Watts / 2880VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.9% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 143V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot,USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multifunction LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CUL listed, UL 1778 |
Standard Warranty | 3 years repair or replace for hardware. 2 years for battery, plus 1 additional year if customers registers device to SmartConnect. |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | CUL listed, UL 1778 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: Cat 5 Ethernet cable, Installation guide, Rack mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, USB cable, Warranty card.
]]>Mechanical | |
Height | 17.01 in (43.2 cm) |
Width | 3.50 in (8.9 cm) |
Depth | 19.29 in (49 cm) |
Weight | 48.61 lb(US) (22.05 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 69.0BTU/hr |
Output | |
Output Power Capacity | 675 Watts / 750VA |
Max Configurable Power | 750 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.9% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 143V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | 1 |
Available SmartSlot™ Interface Quantity | 1 Network management card |
Control panel | Multifunction LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CUL Listed |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | UL 1778 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: Installation guide, Rack mounting brackets, Removable mobile power pack, Smart UPS signalling RS-232 cable, USB cable.
]]>Mechanical | |
Height | 17.01 in (43.2 cm) |
Width | 3.50 in (8.9 cm) |
Depth | 19.29 in (49 cm) |
Weight | 48.61 lb(US) (22.05 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 ¢XF (0 - 40 ¢XC) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 ¢XF (-15 - 45 ¢XC) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 69.0BTU/hr |
Output | |
Output Power Capacity | 675 Watts / 750VA |
Max Configurable Power | 750 VA |
Nominal Output Voltage | 230V |
Efficiency at Full Load | 97.7% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) IEC320 C13 |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC320 C14 |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 151 - 302 Adjustable, 160 - 286V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 Serial, SmartSlot, USB |
Control panel | Multifunction LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | UL 1778 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, User manual.
]]>Mechanical | |
Height | 17.01 in (43.2 cm) |
Width | 3.50 in (8.9 cm) |
Depth | 19.29 in (49 cm) |
Weight | 48.61 lb(US) (22.05 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 69.0BTU/hr |
Output | |
Output Power Capacity | 675 Watts / 750VA |
Max Configurable Power | 750 VA |
Nominal Output Voltage | 230V |
Efficiency at Full Load | 97.7% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) IEC320 C13 |
Input | |
Nominal Input Voltage | 230V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC320 C14 |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 151 - 302 Adjustable, 160 - 286V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T, RJ-45 Serial, SmartSlot, USB |
Control panel | Multifunction LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | UL 1778 |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Smart UPS signalling RS-232 cable, Temperature probe, USB cable.
]]>Mechanical | |
Height | 17.01 in (43.2 cm) |
Width | 3.50 in (8.9 cm) |
Depth | 19.29 in (49 cm) |
Weight | 48.61 lb(US) (22.05 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.0dBA |
Online Thermal Dissipation | 69.0BTU/hr |
Output | |
Output Power Capacity | 600 Watts / 750VA |
Max Configurable Power | 750 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 97.8% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 143V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Control panel | Multifunction LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CUL listed, TAA compliance , UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS |
The APC Smart-UPS SMX750US is a 750VA LCD RM 2U. 600 Watts / 750VA, Input 75 - 154 Adjustable, 82 - 143V / Output 120V.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, USB cable.
]]>Mechanical | |
Height | 1.73inches (44MM, 4.4CM) |
Width | 17.01inches (432MM, 43.2CM) |
Depth | 25.98inches (660MM, 66.0CM) |
Weight | 48.1lbs. (21.82KG) |
Rack Height | 1U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 ¢XF (0 - 40 ¢XC) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 ¢XF (-15 - 45 ¢XC) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 130.0BTU/hr |
Output | |
Output Power Capacity | 670 Watts / 1.0kVA |
Max Configurable Power | 1.0kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 96.0% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (4) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 144V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 2 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | DB-9 RS-232, SmartSlot, USB |
Control panel | LED status display with load and battery bar-graphs and on line : on battery : replace battery : and overload indicators |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | FCC part 15 class A, UL 1778 |
Standard Warranty | 2 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS, PEP, EOLI, Proposition 65 Warning |
The APC Smart-UPS SUA1000RM1U is a 1000VA LCD RM 1U. 670 Watts / 1000VA, Input 75 - 154 Adjustable, 82 - 144V / Output 120V.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Rack mounting brackets, Rack mounting support rails, Smart UPS signalling RS-232 cable, USB cable, User manual.
]]>Mechanical | |
Height | 1.73inches (44MM, 4.4CM) |
Width | 17.01inches (432MM, 43.2CM) |
Depth | 25.98inches (660MM, 66.0CM) |
Weight | 48.1lbs. (21.82KG) |
Rack Height | 1U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 ¢XF (0 - 40 ¢XC) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 ¢XF (-15 - 45 ¢XC) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.0dBA |
Online Thermal Dissipation | 130.0BTU/hr |
Output | |
Output Power Capacity | 480 Watts / 750VA |
Max Configurable Power | 750VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 95.9% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (4) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 ft (2.44 m) |
Input voltage range for main operations | 75 - 154 Adjustable, 82 - 144V |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 2 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | DB-9 RS-232, SmartSlot, USB |
Control panel | LED status display with load and battery bar-graphs and on line : on battery : replace battery : and overload indicators. |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | FCC part 15 class A, UL 1778 |
Standard Warranty | 2 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
The APC Smart-UPS SUA750RM1U is a 750VA LCD RM 2U. 480 Watts / 750VA, Input 75 - 154 Adjustable, 82 - 144V / Output 120V.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Rack mounting brackets, Rack mounting support rails, Smart UPS signalling RS-232 cable, USB cable, User manual.
]]>APC Smart-UPS Features & Benefits
Availability
Manageability
Serviceability
Adaptability
Safety
APC SMT1000 Features:
APC SMT1000 Specifications:
Mechanical | |
Height | 8.62 in. (219 mm.) |
Width | 6.73 in. (171 mm.) |
Depth | 17.28 in. (439 mm.) |
Weight | 42 lbs. (19 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 41.00 dBA |
Online Thermal Dissipation | 100.00 BTU/hr |
Output | |
Output Power Capacity | 670 Watts / 1000 VA |
Max Configurable Power | 670 Watts / 1000 VA |
Nominal Output Voltage | 120V |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC6 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot,USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 459 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | cUL Listed,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT1000
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Smart UPS signaling RS-232 cable, USB cable, User Manual
]]>Mechanical | |
Height | 1.73 inches (44MM, 4.4CM) |
Width | 17.01 inches (432MM, 43.2CM) |
Depth | 19.56 inches (502MM, 50.2CM) |
Weight | 34.83lbs. (15.8KG) |
Rack Height | 1U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95 % |
Operating Elevation | 0 - 10000ft (0 - 3048meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Acoustic Level | 46.0dBA |
Heat Dissipation | 88.0BTU/hr |
Output | |
Output Power Capacity | 800 Watts / 1.0kVA |
Max Configurable Power | 1.0kVA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98.7% |
Harmonic Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 50/60 Hz +/- 3 Hz Sync to mains |
Waveform Type | Sine wave |
Output Connections | (4) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 ft (2.44 m) |
Batteries & Runtime | |
Battery Type | Lead-acid battery |
Typical recharge time | 5 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | USB Type A, Serial (RJ45) |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : m |
Conformance | |
Regulatory Approvals | UL1778 5th, FCC Part 15 Class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | APC Green Premium Label product |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
The APC SMT1000RM1U Smart-UPS is designed for small and medium sized businesses to maintain uptime and continuity. The 1000VA line interactive 1U rackmount provides pure sine wave power with a higher power factor to support critical electronics during power disruptions. It comes with NEMA 5-15P input and 4x NEMA 5-15R outlets. It comes with PowerChute Software, which provides graceful shutdown of physical servers, virtual machines, and HCI clusters. It provides surge protection against lightning strikes, power sags, brownouts, and surges. The SMT UPS has a 3-year warranty, and the built-in lead acid battery has a 2-year warranty. The SMT1000RM1U includes intelligent battery management with replacement suggestions, temperature-adjusted charging, self-tests, and battery disconnect notifications.
]]>APC SMT1000RM2U Features:
APC SMT1000RM2U Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 18.0 in. (457 mm.) |
Weight | 62 lbs. (28 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 45.00 dBA |
Online Thermal Dissipation | 56.00 BTU/hr |
Output | |
Output Power Capacity | 700 Watts / 1000 VA |
Max Configurable Power | 700 Watts / 1000 VA |
Nominal Output Voltage | 120V |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 57 - 63 Hz for 60 Hz nominal |
Crest Factor | up to 5 : 1 |
Waveform Type | Sine wave |
Output Connections | (6) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot,USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 459 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CSA,FCC Part 15 Class A,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT1000RM2U
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB cable
]]>APC SMT1500 Features:
APC SMT1500 Specifications:
Mechanical | |
Height | 8.62 in. (219 mm.) |
Width | 6.73 in. (171 mm.) |
Depth | 17.28 in. (439 mm.) |
Weight | 53 lbs. (24 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 45.00 dBA |
Online Thermal Dissipation | 135.00 BTU/hr |
Output | |
Output Power Capacity | 980 Watts / 1500 VA |
Max Configurable Power | 980 Watts / 1440 VA |
Nominal Output Voltage | 120V |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47 - 53 Hz for 50 Hz nominal, 57-63Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC7 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot,USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 459 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | cUL Listed,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT1500
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Smart UPS signalling RS-232 cable, USB cable
]]>APC SMT1500RM2UC Features:
APC SMT1500RM2UC Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 18.0 in. (457 mm.) |
Weight | 63 lbs. (28.64 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 46.00 dBA |
Online Thermal Dissipation | 90.00 BTU/hr |
Output | |
Output Power Capacity | 1000 Watts / 1500 VA |
Max Configurable Power | 1000 Watts / 1440 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 97% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 57 - 63 Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (6) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot,USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 459 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CSA,FCC Part 15 Class A,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT1500RM2U
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting support rails, Smart UPS signaling RS-232 cable, USB cable
]]>APC SMT2200 Features:
APC SMT2200 Specifications:
Mechanical | |
Height | 17.0 in. (432 mm.) |
Width | 7.70 in. (196 mm.) |
Depth | 21.42 in. (544 mm.) |
Weight | 112 lbs. (50.91 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 45.00 dBA |
Online Thermal Dissipation | 275.00 BTU/hr |
Output | |
Output Power Capacity | 1980 Watts / 2200 VA |
Max Configurable Power | 1980 Watts / 2200 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47 - 53 Hz for 50 Hz nominal, 57-63Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R (2) NEMA 5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-20P |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC55 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 530 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CSA,FCC Part 15 Class A,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS SMT2200 is a 2200VA LCD 120V. 1980 Watts / 2200 VA,Input 120V / Output 120V, Interface Port SmartSlot
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Smart UPS signalling RS-232 cable, USB cable
]]>APC SMT2200RM2UC Features:
APC SMT2200RM2UC Specifications:
Mechanical | |
Height | 3.39 in. (86 mm.) |
Width | 18.90 in. (480 mm.) |
Depth | 26.89 in. (683 mm.) |
Weight | 93.08 lbs. (42.31 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 215.00 BTU/hr |
Output | |
Output Power Capacity | 1980 Watts / 2200 VA |
Max Configurable Power | 1980 Watts / 2200 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Output Connections | (6) NEMA 5-15R (2) NEMA 5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-20P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC43 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 530 Joules |
Conformance | |
Regulatory Approvals | CSA,FCC Part 15 Class A,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT2200RM2U
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Rack Mounting brackets, Rack Mounting support rails, Smart UPS signaling RS-232 cable, USB cable
]]>APC SMT3000 Features:
APC SMT3000 Specifications:
Mechanical | |
Height | 17.0 in. (432 mm.) |
Width | 7.70 in. (196 mm.) |
Depth | 21.42 in. (544 mm.) |
Weight | 116 lbs. (52.73 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 45.00 dBA |
Online Thermal Dissipation | 275.00 BTU/hr |
Output | |
Output Power Capacity | 2700 Watts / 3000 VA |
Max Configurable Power | 2700 Watts / 3000 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47 - 53 Hz for 50 Hz nominal, 57-63Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R (2) NEMA 5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-30P |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC55 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 530 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CSA,FCC Part 15 Class A,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS SMT3000 is a 3000VA LCD 120V. 2700 Watts / 3000 VA,Input 120V / Output 120V, Interface Port USB.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Smart UPS signalling RS-232 cable, USB cable
]]>APC SMT3000RM2UC Features:
APC SMT3000RM2UC Specifications:
Mechanical | |
Height | 3.39 in. (86 mm.) |
Width | 18.90 in. (480 mm.) |
Depth | 26.89 in. (683 mm.) |
Weight | 97.42 lbs. (44.28 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 348.00 BTU/hr |
Output | |
Output Power Capacity | 2700 Watts / 3000 VA |
Max Configurable Power | 2700 Watts / 3000 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Waveform Type | Sine wave |
Output Connections | (6) NEMA 5-15R (2) NEMA 5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-30P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC43 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 459 Joules |
Conformance | |
Regulatory Approvals | CSA,FCC Part 15 Class A,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT3000RM2U
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack Mounting support rails, Smart UPS signaling RS-232 cable, USB cable
]]>Mechanical | |
Height | 3.39 in. (86 mm.) |
Width | 18.9 in. (480 mm.) |
Depth | 26.89 in. (683 mm.) |
Weight | 97.42 lbs. (44.28 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 348.00 BTU/hr |
Output | |
Output Power Capacity | 2.7 KWatts / 3.0 kVA |
Max Configurable Power | 2.7 KWatts / 3.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (2) NEMA L6-20R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L6-20P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 141 - 255 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC43 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | - |
Surge Protection and Filtering | |
Surge energy rating | 320 Joules |
Filtering | - |
Conformance | |
Regulatory Approvals | ENERGY STAR (USA), FCC Part 15 Class A, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment Protection Policy | $150,000 |
Environmental Compliance | RoHS, REACH, PEP, EOLI |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Documentation CD , Rack mounting hardware , Rack Mounting support rails , Smart UPS signalling RS-232 cable , USB cable
]]>APC SMT750 Features:
APC SMT750 Specifications:
Mechanical | |
Height | 6.34 in. (161 mm.) |
Width | 5.43 in. (138 mm.) |
Depth | 14.29 in. (363 mm.) |
Weight | 29.0 lbs. (13.2 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 90.00 BTU/hr |
Output | |
Output Power Capacity | 500 Watts / 750 VA |
Max Configurable Power | 500 Watts / 750 VA |
Nominal Output Voltage | 120V |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47 - 53 Hz for 50 Hz nominal, 57-63Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (6) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC548 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT750
]]>The APC Smart-UPS SMT750C is a 750VA LCD 120V. 500 Watts / 750 VA,Input 120V / Output 120V, Interface Port Smart-Slot.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Smart UPS signalling RS-232 cable, USB cable
]]>APC SMT750RM2UC Features:
APC SMT750RM2UC Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 16.0 in. (406 mm.) |
Weight | 38.0 lbs. (17.27 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 42.00 dBA |
Online Thermal Dissipation | 46.00 BTU/hr |
Output | |
Output Power Capacity | 500 Watts / 750 VA |
Max Configurable Power | 500 Watts / 750 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 97% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 57-63 Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (6) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 144V |
Input voltage adjustable range for mains operation | 75 - 154V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC123 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 459 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | CSA,FCC Part 15 Class A,UL 1449, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
Formerly the SMT750RM2U
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack Mounting support rails, Smart UPS signaling RS-232 cable, USB cable
]]>APC SMX750 Specifications:
Mechanical | |
Height | 8.80 in. (224 mm.) |
Width | 6.80 in. (173 mm.) |
Depth | 2.50 in. (64 mm.) |
Weight | 1.75 lbs. (0.80 kg) |
Color | Black |
Batteries & Runtime | |
Battery Type | No internal battery- uses external battery system |
Battery mounting | Stand alone battery stack |
Conformance | |
Environmental Compliance | RoHS |
APC SMX1000 Features:
APC SMT750RM2U Specifications:
Mechanical | |
Height | 17.00 in. (432 mm.) |
Width | 3.50 in. (89 mm.) |
Depth | 19.30 in. (490 mm.) |
Weight | 50.30 lbs. (22.86 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.00 dBA |
Online Thermal Dissipation | 82.00 BTU/hr |
Output | |
Output Power Capacity | 800 Watts / 1000 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 47-63 Hz for |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 143V |
Maximum Input Current | 12A |
Input Breaker Capacity | 15.0A |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC116 |
RBC Quantity | 1 |
DC Overcurrent Protection | 60A |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 600 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | cUL Listed,UL 1778 |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS SMX1000 is a 1000VA Rack/Tower LCD 120V. 800 Watts / 1000 VA,Input 120V / Output 120V, Interface Port SmartSlot, USB, Extended runtime model, Rack Height 2U.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, USB cable
]]>APC SMX3000RMLV2U Specifications:
Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 124.00 lbs. (56.36 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Output | |
battoutvolt | 120 |
Batteries & Runtime | |
Battery Volt-Amp Hour Capacity | 1200 |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Battery Mounting | Enclosed battery cartridge |
Expected Battery Life (years) | 3-5 |
RBC Quantity | 2 |
Battery blocks per string | 10 |
Conformance | |
Standard Warranty | 2 years repair or replace through manufacturer |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: Installation guide, Rack Mounting brackets
]]>APC SMX1500RM2U Features:
APC SMX1500RM2U Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 19.30 in. (490 mm.) |
Weight | 54.60 lbs. (24.82 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.00 dBA |
Online Thermal Dissipation | 133.00 BTU/hr |
Output | |
Output Power Capacity | 1200 Watts / 1500 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 47-63 Hz for |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 143V |
Input voltage adjustable range for mains operation | 75-154V |
Maximum Input Current | 12A |
Input Breaker Capacity | 20.0A |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC115 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | cUL Listed,UL 1778 |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS SMX1500RM2U is a 1500VA Rack/Tower LCD 120V. 1200 Watts / 1500 VA,Input 120V / Output 120V, Interface Port SmartSlot, USB, Extended runtime model, Rack Height 2U.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting hardware, Rack Mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable
]]>APC SMX1500RM2UNC Features:
APC SMX1500RM2UNC Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 19.30 in. (490 mm.) |
Weight | 54.60 lbs. (24.82 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.00 dBA |
Online Thermal Dissipation | 133.00 BTU/hr |
Output | |
Output Power Capacity | 1200 Watts / 1500 VA |
Nominal Output Voltage | 120V |
Output Frequency (sync to mains) | 47-63 Hz |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-15P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 143V |
Input voltage adjustable range for mains operation | 75-154V |
Maximum Input Current | 12A |
Input Breaker Capacity | 20.0A |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC115 |
RBC Quantity | 1 |
DC Overcurrent Protection | 60A |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 600 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | cUL Listed,UL 1778 |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS SMX1500RM2UNC is a 1500VA Rack/Tower LCD 120V with Network Card. 1200 Watts / 1500 VA,Input 120V / Output 120V, Interface Port SmartSlot, USB, Extended runtime model, Rack Height 2U.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack mounting hardware, Rack Mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, Temperature Probe, USB cable
]]>APC SMX2000RMLV2U Features:
APC SMX2000RMLV2U Specifications:
Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 84.60 lbs. (38.45 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 203.00 BTU/hr |
Output | |
Output Power Capacity | 1800 Watts / 1920 VA |
Max Configurable Power | 1800 Watts / 1920 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Output Frequency (sync to mains) | 47-53 HZ for 50 Hz nominal, 57-63 Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (3) NEMA 5-15R (3) NEMA 5-20R (1) NEMA L5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-20P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82 - 143V |
Input voltage adjustable range for mains operation | 75-154V |
Transfer Time | 2-4 ms |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC117 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | LED status display with On Line : On Battery : Replace Battery and Overload indicators,Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI,CSA,EN 50091-2,EN 55022 Class A,FCC Part 15 Class A,NOM,TUV,UL 1778,VCCI Class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery,optional on-site warranties available,optional extended warranties available |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable
]]>Mechanical | |
Height | 7 in. (178 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 19 in. (483 mm.) |
Weight | 85 lbs. (38.64 kg) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 150.00 BTU/hr |
Output | |
Output Power Capacity | 1.98 KWatts / 2.2 kVA |
Max Configurable Power | 1.98 KWatts / 2.2 kVA |
Nominal Output Voltage | 230V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (8) IEC 320 C13 (2) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V, 230V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC 320 C20 |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 140 - 280 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC143 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | C-tick, CE, CSA, EN 50091-1, EN 50091-2, FCC Part 15 Class A, GOST, IEC 60950, IRAM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack Mounting support rails, Smart UPS signaling RS-232 cable, USB cable
]]>Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 82.1 lbs. (37.32 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 150.00 BTU/hr |
Output | |
Output Power Capacity | 1.98 KWatts / 2.2 kVA |
Max Configurable Power | 1.98 KWatts / 2.2 kVA |
Nominal Output Voltage | 230V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (8) IEC 320 C13 (1) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V, 230V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC 320 C20 |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 140 - 280 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC117 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | C-tick, CE, CSA, EN 50091-1, EN 50091-2, FCC Part 15 Class A, GOST, IEC 60950, IRAM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH, PEP, EOLI |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack Mounting support rails, Smart UPS signaling RS-232 cable, USB cable
]]>APC SMX2200RMLV2U Features:
APC SMX2200RMLV2U Specifications:
Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 84.60 lbs. (38.45 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 268.00 BTU/hr |
Output | |
Output Power Capacity | 1980 Watts / 2200 VA |
Max Configurable Power | 1980 Watts / 2200 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47-53 HZ for 50 Hz nominal, 57-63 Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (6) NEMA 5-15R (2) NEMA 5-20R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA 5-30P |
Cord Length | 8 feet (2.44 meters) |
Transfer Time | 2-4 ms |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC117 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | LED status display with On Line : On Battery : Replace Battery and Overload indicators,Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI,CSA,EN 50091-2,EN 55022 Class A,FCC Part 15 Class A,NOM,TUV,UL 1778,VCCI Class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery,optional on-site warranties available,optional extended warranties available |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable
]]>Mechanical | |
Height | 7 in. (178 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 19 in. (483 mm.) |
Weight | 85 lbs. (38.64 kg) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 184.00 BTU/hr |
Output | |
Output Power Capacity | 2.7 KWatts / 3.0 kVA |
Max Configurable Power | 2.7 KWatts / 3.0 kVA |
Nominal Output Voltage | 230V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (8) IEC 320 C13 (2) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V, 230V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC 320 C20 |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 140 - 280 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC143 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot Interface Quantity | |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | C-tick, CE, CSA, EN 50091-1, EN 50091-2, FCC Part 15 Class A, GOST, IEC 60950, IRAM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Documentation CD , Rack Mounting Brackets , Smart UPS signalling RS-232 cable , USB cable , User Manual
]]>Mechanical | |
Height | 7 in. (178 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 19 in. (483 mm.) |
Weight | 85 lbs. (38.64 kg) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 184.00 BTU/hr |
Output | |
Output Power Capacity | 2.7 KWatts / 3.0 kVA |
Max Configurable Power | 2.7 KWatts / 3.0 kVA |
Nominal Output Voltage | 230V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (8) IEC 320 C13 (2) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V, 230V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC 320 C20 |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 140 - 280 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC143 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot Interface Quantity | |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | C-tick, CE, CSA, EN 50091-1, EN 50091-2, FCC Part 15 Class A, GOST, IEC 60950, IRAM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Rack Mounting support rails , Smart UPS signalling RS-232 cable , Temperature Probe , User Manual , Web/SNMP Management Card
]]>Mechanical | |
Height | 7 in. (178 mm.) |
Width | 17 in. (432 mm.) |
Depth | 19 in. (483 mm.) |
Weight | 85 lbs. (38.64 kg) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 184.00 BTU/hr |
Output | |
Output Power Capacity | 2.7 KWatts / 3.0 kVA |
Max Configurable Power | 2.7 KWatts / 3.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (4) IEC 320 C13 (Battery Backup), (2) IEC 320 C19 (Battery Backup), (2) NEMA L6-20R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC-320 C20 |
Cord Length | 6 feet (1.8 meters) |
Input voltage range for main operations | 141 - 255, 160 - 280 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | CURK143-01-04 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | C-tick, CE, CSA, EN 50091-1, EN 50091-2, EN 60950, ENERGY STAR (USA), FCC Part 15 Class A, GOST, IRAM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Documentation CD , Rack Mounting Brackets , Smart UPS signalling RS-232 cable , USB cable , User Manual
]]>Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 82.1 lbs. (37.32 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 184.00 BTU/hr |
Output | |
Output Power Capacity | 2.7 KWatts / 3.0 kVA |
Max Configurable Power | 2.7 KWatts / 3.0 kVA |
Nominal Output Voltage | 230V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (8) IEC 320 C13 (1) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V, 230V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC 320 C20 |
Cord Length | 6 feet (1.83 meters) |
Input voltage range for main operations | 140 - 280 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC117 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot Interface Quantity | |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | C-tick, CE, CSA, EN 50091-1, EN 50091-2, FCC Part 15 Class A, GOST, IEC 60950, IRAM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH, PEP, EOLI |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Documentation CD , Rack Mounting Brackets , Smart UPS signalling RS-232 cable , USB cable , User Manual
]]>Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 82.1 lbs. (37.32 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 184.00 BTU/hr |
Output | |
Output Power Capacity | 2.7 KWatts / 3.0 kVA |
Max Configurable Power | 2.7 KWatts / 3.0 kVA |
Nominal Output Voltage | 230V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (8) IEC 320 C13 (1) IEC 320 C19 |
Input | |
Nominal Input Voltage | 208V, 230V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | IEC 320 C20 |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 140 - 280 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC117 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot Interface Quantity | |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 |
Conformance | |
Regulatory Approvals | C-tick, CE, CSA, EN 50091-1, EN 50091-2, FCC Part 15 Class A, GOST, IEC 60950, IRAM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH, PEP, EOLI |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Rack Mounting support rails , Smart UPS signalling RS-232 cable , Temperature Probe , User Manual , Web/SNMP Management Card
]]>APC SMX3000RMLV2U Features:
APC SMX3000RMLV2U Specifications:
Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 84.60 lbs. (38.45 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 276.00 BTU/hr |
Output | |
Output Power Capacity | 2700 Watts / 3000 VA |
Max Configurable Power | 2700 Watts / 3000 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47-53 HZ for 50 Hz nominal, 57-63 Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (3) NEMA 5-15R (3) NEMA 5-20R (1) NEMA L5-30R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8 feet (2.44 meters) |
Transfer Time | 2-4 ms |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC117 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Available SmartSlot™ Interface Quantity | 1 |
Control panel | LED status display with On Line : On Battery : Replace Battery and Overload indicators,Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI,CSA,EN 50091-2,EN 55022 Class A,FCC Part 15 Class A,NOM,TUV,UL 1778,VCCI Class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery, optional on-site warranties available, optional extended warranties available |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable
]]>Mechanical | |
Height | 3.36 in. (85 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 26.26 in. (667 mm.) |
Weight | 84.60 lbs. (38.45 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 276.00 BTU/hr |
Output | |
Output Power Capacity | 2700 Watts / 3000 VA |
Max Configurable Power | 2700 Watts / 3000 VA |
Nominal Output Voltage | 120V |
Efficiency at Full Load | 98% |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47-53 HZ for 50 Hz nominal, 57-63 Hz for 60 Hz nominal |
Waveform Type | Sine wave |
Output Connections | (3) NEMA 5-15R (3) NEMA 5-20R (1) NEMA L5-30R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-30P |
Cord Length | 8 feet (2.44 meters) |
Transfer Time | 2-4 ms |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC117 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | SmartSlot |
Pre-Installed SmartSlot Cards | AP9631 |
Control panel | LED status display with On Line : On Battery : Replace Battery and Overload indicators,Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 540 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | BSMI,CSA,EN 50091-2,EN 55022 Class A,FCC Part 15 Class A,NOM,TUV,UL 1778,VCCI Class A |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery, optional on-site warranties available, optional extended warranties available |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Removable support feet, Smart UPS signalling RS-232 cable, USB cable, Web/SNMP Management Card
]]>APC SMX48RMBP2U Features:
APC SMX48RMBP2U Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 17.00 in. (432 mm.) |
Depth | 19.30 in. (6490 mm.) |
Weight | 63.00 lbs. (28.64 kg) |
Rack Height | 2U |
Color | Black |
Output | |
battoutvolt | 48 |
Input | |
Nominal Input Voltage | 48VDC |
Batteries & Runtime | |
Battery Volt-Amp Hour Capacity | 864 |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Battery Mounting | Enclosed battery cartridge |
Expected Battery Life (years) | 3-5 |
RBC Quantity | 2 |
Conformance | |
Standard Warranty | 2 years repair or replace through manufacturer |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: Installation guide, Rack Mounting brackets
]]>APC SMX3000RMLV2UNC Features:
APC SMX750 Specifications:
Mechanical | |
Height | 17.00 in. (432 mm.) |
Width | 3.50 in. (89 mm.) |
Depth | 19.30 in. (490 mm.) |
Weight | 48.50 lbs. (22.05 kg) |
Rack Height | 2U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 40.00 dBA |
Online Thermal Dissipation | 69.00 BTU/hr |
Output | |
Output Power Capacity | 600 Watts / 750 VA |
Nominal Output Voltage | 120V |
Output Voltage Distortion | Less than 5% at full load |
Output Frequency (sync to mains) | 47-63 Hz |
Waveform Type | Sine wave |
Output Connections | (8) NEMA 5-15R |
Input | |
Nominal Input Voltage | 120V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L5-15P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 82-143V |
Input voltage adjustable range for mains operation | 75-154V |
Maximum Input Current | 12A |
Input Breaker Capacity | 15.0 A |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Included Battery Modules | 1 |
Avaialable Battery Slots | 1 |
Typical recharge time | 3 hour(s) |
Replacement Battery | APCRBC116 |
RBC Quantity | 1 |
DC Overcurrent Protection | 60A |
Communications & Management | |
Interface Port(s) | SmartSlot, USB |
Avaialable SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 645 Joules |
Filtering | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | cUL Listed,UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equipment protection policy | Lifetime : $150000 |
Environmental Compliance | RoHS 7b Exemption, REACH: Contains No SVHCs |
The APC Smart-UPS SMX750 is a 750VA Rack/Tower LCD 120V. 600 Watts / 750 VA,Input 120V / Output 120V, Interface Port SmartSlot, USB, Extended runtime model, Rack Height 2U.
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, USB cable
]]>APC SRT10KRMXLT Features:
Mechanical | |
Height | 10.35 in. (263 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 28.15 in. (715 mm.) |
Weight | 246 lbs. (111.58 kg) |
Rack Height | 6U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 2490.0 BTU/hr |
Output | |
Output Power Capacity | 10.0 KWatts / 10.0 kVA |
Max Configurable Power | 10.0 KWatts / 10.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 3-wire (2PH + G) (Battery Backup), (4) NEMA L6-20R (Battery Backup), (2) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 2 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT10KXLT Features:
Mechanical | |
Height | 17.0 in. (432 mm.) |
Width | 10.35 in. (263 mm.) |
Depth | 28.15 in. (715 mm.) |
Weight | 246 lbs. (111.58 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 2490.0 BTU/hr |
Output | |
Output Power Capacity | 10.0 KWatts / 10.0 kVA |
Max Configurable Power | 10.0 KWatts / 10.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 3-wire (2PH + G) (Battery Backup), (4) NEMA L6-20R (Battery Backup), (2) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 2 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT5KRMXLT Features:
Mechanical | |
Height | 5.1 in. (130 mm.) |
Width | 17 in. (432 mm.) |
Depth | 28.32 in. (719 mm.) |
Weight | 123 lbs. (55.79 kg) |
Rack Height | 3U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1047.00 BTU/hr |
Output | |
Output Power Capacity | 4.25 KWatts / 5.0 kVA |
Max Configurable Power | 4.25 KWatts / 5.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (2) NEMA L6-20R (Battery Backup), (2) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | NEMA L6-30P |
Cord Length | 10 ft. (3.05 m) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT5KRMXLW-HW Features:
Mechanical | |
Height | 5.1 in. (130 mm.) |
Width | 17 in. (432 mm.) |
Depth | 28.32 in. (719 mm.) |
Weight | 123 lbs. (55.79 kg) |
Rack Height | 3U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 931.00 BTU/hr |
Output | |
Output Power Capacity | 4.5 KWatts / 5.0 kVA |
Max Configurable Power | 4.5 KWatts / 5.0 kVA |
Nominal Output Voltage | 208V, 230V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 3-wire (2PH + G) (Battery Backup) |
Input | |
Nominal Input Voltage | 208V, 230V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G), Hard Wire 3 wire (1PH+N+G) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CE, CE Mark, CSA C22.2 No.107.3-05, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR (USA), ENERGY STAR (EU), FCC Part 15 Class A, IRAM, NOM, RCM, UL 1778, VDE |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT5KXLT Features:
Mechanical | |
Height | 5.1 in. (130 mm.) |
Width | 17 in. (432 mm.) |
Depth | 28.32 in. (719 mm.) |
Weight | 123 lbs. (55.79 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1047.00 BTU/hr |
Output | |
Output Power Capacity | 4.25 KWatts / 5.0 kVA |
Max Configurable Power | 4.25 KWatts / 5.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (2) NEMA L6-20R (Battery Backup), (2) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | NEMA L6-30P |
Cord Length | 10 ft. (3.05 m) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT6KRMXLT Features:
Mechanical | |
Height | 6.85 in. (174 mm.) |
Width | 17.0 in. (43 mm.) |
Depth | 28.32 in. (719 mm.) |
Weight | 135 lbs. (61.23 kg) |
Rack Height | 4U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1402.00 BTU/hr |
Output | |
Output Power Capacity | 6.0 KWatts / 6.0 kVA |
Max Configurable Power | 6.0 KWatts / 6.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 3-wire (2PH + G) (Battery Backup), (2) NEMA L6-20R (Battery Backup), (3) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT6KXLT Features:
Mechanical | |
Height | 17.0 in. (432 mm.) |
Width | 6.85 in. (174 mm.) |
Depth | 28.32 in. (719 mm.) |
Weight | 135 lbs. (61.23 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1402.00 BTU/hr |
Output | |
Output Power Capacity | 6.0 KWatts / 6.0 kVA |
Max Configurable Power | 6.0 KWatts / 6.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 3-wire (2PH + G) (Battery Backup), (2) NEMA L6-20R (Battery Backup), (3) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 1 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT8KRMXLT Features:
Mechanical | |
Height | 10.35 in. (263 mm.) |
Width | 17.0 in. (432 mm.) |
Depth | 28.15 in. (715 mm.) |
Weight | 246 lbs. (11.58 kg) |
Rack Units | 6U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1712.00 BTU/hr |
Output | |
Output Power Capacity | 8.0 KWatts / 8.0 kVA |
Max Configurable Power | 8.0 KWatts / 8.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (1) Hard Wire 3-wire (2PH + G) (Battery Backup), (4) NEMA L6-20R (Battery Backup), (2) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 2 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
APC SRT8KXLT Features:
Mechanical | |
Height | 17.0 in. (432 mm.) |
Width | 10.35 in. (263 mm.) |
Depth | 28.15 in. (715 mm.) |
Weight | 246 lbs. (11.58 kg) |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 55.00 dBA |
Online Thermal Dissipation | 1712.00 BTU/hr |
Output | |
Output Power Capacity | 8.0 KWatts / 8.0 kVA |
Max Configurable Power | 8.0 KWatts / 8.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 2% |
Waveform Type | Sine wave |
Output Connections | (4) NEMA L6-20R (Battery Backup), (1) Hard Wire 3-wire (2PH + G) (Battery Backup), (2) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 40 - 70 Hz (auto sensing) |
Input Connections | Hard Wire 3-wire (2PH + G) |
Input voltage range for main operations | 160 - 275 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 1.5 hour(s) |
Replacement Battery | APCRBC140 |
RBC Quantity | 2 |
Communications & Management | |
Interface Port(s) | RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB |
Available SmartSlot Interface Quantity | 1 |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Audible and visible alarms prioritized by severity |
Emergency Power Off (EPO) | Yes |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Conformance | |
Regulatory Approvals | CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, NOM, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Environmental Compliance | RoHS, REACH |
Product Features
The APC SU027RM2U is a Smart-UPS Backplate kit with (2) 5-20R and (1) L5-30R for SUA2200RM2U and SUA3000RM2U.
APC SU027RM2U Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 7.0 in. (178 mm.) |
Depth | 10.0 in. (254 mm.) |
Weight | 2.0 lbs. (0.90 kgs.) |
Output | |
Output Connections | (2) NEMA 5-15R (2) NEMA 5-20R (1) NEMA L5-30R |
Input | |
Nominal Input Voltage | 100V, 120V |
Number of Power cords | 1 |
Conformance | |
Environmental Compliance | RoHS 7b Exemption |
APC SU028RM2U Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 7.0 in. (178 mm.) |
Depth | 10.0 in. (254 mm.) |
Weight | 2.0 lbs. (0.90 kgs.) |
Output | |
Output Connections | (3) NEMA 5-15R (4) NEMA L5-15R |
Input | |
Nominal Input Voltage | 100V, 120V |
Number of Power cords | 1 |
APC SU029RM2U Specifications:
Mechanical | |
Height | 3.50 in. (89 mm.) |
Width | 7.0 in. (178 mm.) |
Depth | 10.0 in. (254 mm.) |
Weight | 2.0 lbs. (0.90 kgs.) |
Output | |
Output Connections | (2) NEMA 5-15R (2) NEMA 5-20R (1) NEMA L5-20R |
Input | |
Nominal Input Voltage | 100V, 120V |
Number of Power cords | 1 |
Conformance | |
Environmental Compliance | RoHS 7b Exemption |
Includes: Installation guide, Mounting Hardware, Rack Mounting brackets, Screws
APC SU032A Features:
Specifications:
Mechanical | |
Height | 12.25 in. (311 mm.) |
Width | 19 in. (483 mm.) |
Depth | 25 in. (635 mm.) |
Weight | 320 lbs. (145.45 kg) |
Rack Height | 7U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 5 - 113 °F (-15 - 45 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 53.00 dBA |
Online Thermal Dissipation | 1708.00 BTU/hr |
Output | |
Output Power Capacity | 4.0 KWatts / 5.0 kVA |
Max Configurable Power | 4.0 KWatts / 5.0 kVA |
Nominal Output Voltage | 120V, 208V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (2) NEMA L6-20R (Battery Backup), (1) NEMA L6-30R (Battery Backup), (12) NEMA 5-20R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L6-30P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 157 - 255 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC55 |
RBC Quantity | 2 |
Communications & Management | |
Interface Port(s) | DB-9 RS-232 , RJ-45 10 Base-T ethernet for web/ SNMP/ Telnet management , SmartSlot |
Available SmartSlot Interface Quantity | - |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 1020 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CSA, FCC Part 15 Class A, UL 1778 |
Standard Warranty | 3 years repair or replace (excluding battery) and 2 year for battery |
Equip[ment Protection Policy | Lifetime: $150,000 |
Environmental Compliance | PEP, EOLI |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Rack Mounting support rails , Smart UPS signalling RS-232 cable , User Manual
]]>The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Rack Mounting support rails , Smart UPS signalling RS-232 cable , User Manual , Web/SNMP Management Card
]]>Mechanical | |
Height | 8.75 in. (222 mm.) |
Width | 19 in. (483 mm.) |
Depth | 26 in. (660 mm.) |
Weight | 215 lbs. (97.73 kg) |
Rack Height | 5U |
Color | Black |
Environmental | |
Operating Environment | 32 - 104 °F (0 - 40 °C) |
Operating Relative Humidity | 0 - 95% |
Operating Elevation | 0-10000 feet (0-3000 meters) |
Storage Temperature | 23 - 131 °F (-5 - 55 °C) |
Storage Relative Humidity | 0 - 95% |
Storage Elevation | 0-50000 feet (0-15000 meters) |
Audible noise at 1 meter from surface of unit | 53.00 dBA |
Online Thermal Dissipation | 344.00 BTU/hr |
Output | |
Output Power Capacity | 4.0 KWatts / 5.0 kVA |
Max Configurable Power | 4.0 KWatts / 5.0 kVA |
Nominal Output Voltage | 208V |
Output Voltage Distortion | Less than 5% at full load |
Waveform Type | Sine wave |
Output Connections | (2) NEMA L6-20R (Battery Backup), (2) NEMA L6-30R (Battery Backup) |
Input | |
Nominal Input Voltage | 208V |
Input Frequency | 50/60 Hz +/- 3 Hz (auto sensing) |
Input Connections | NEMA L6-30P |
Cord Length | 8 feet (2.44 meters) |
Input voltage range for main operations | 141 - 255 V |
Batteries & Runtime | |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time | 3 hour(s) |
Replacement Battery | RBC55 |
RBC Quantity | 2 |
Communications & Management | |
Interface Port(s) | DB-9 RS-232 , SmartSlot |
Available SmartSlot Interface Quantity | - |
Control panel | Multi-function LCD status and control console |
Audible Alarm | Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) | Optional |
Surge Protection and Filtering | |
Surge energy rating | 480 Joules |
Filtering | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Conformance | |
Regulatory Approvals | CSA, FCC Part 15 Class A, UL 1778 |
Standard Warranty | 2 years repair or replace (excluding battery) |
Equip[ment Protection Policy | Lifetime: $150,000 |
Environmental Compliance | RoHS, PEP, EOLI |
The APC Smart-UPS are intelligent and efficient network power protection from entry level to scalable runtime. Ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software , Rack Mounting support rails , Smart UPS signalling RS-232 cable , User Manual , Web/SNMP Management Card
]]>APC NetShelter WX Enclosures | Front Door | Height | Depth* | Rails | Width* |
APC AR100 | Glass | 13U | 24" | 19" EIA | 23" |
APC AR100HD | Vented | 13U | 24" | 19" EIA | 23" |
At Server Racks Online all of our Apple Xserve Compatible Rack Enclosures are user customizable insuring that you get the best server equipment rack for your needs. Just click on the size depth of server rack you need, select the height and options you would like in the cabinet, and which rack mount accessories you need. It's that easy! We will build, paint, and configure your premium server rack to your exact specification and ship it to you - usually within a few days of placing your order with us.
Apple Xserver Compatible Rack Mount Cabinet Accessories
Our Server Racks have multiple options for Front Doors including Solid Steel, Louvered, Plexiglas, Perforated Steel, and Perforated Steel with Plexiglas insert. All doors are lockable and secure. We offer solid and removable side panels for your convenience. All Server Rack Doors are full length for added security. We also offer multiple power strips that fit behind the rails so they don't take up any additional rack space. An exhaust fan can also be added to any Server Rack for ventilation.
Apple Xserver Compatible Rack Mount Cabinet Specifications
Our Server Racks are made with .060 (16 Gauge) CRS steel and you have your choice of colors (IBM blue, Black, Pearl White, Light and Dark Gray)
Apple Xserver Compatible Rack Mount Cabinet Dimensions
All of our Server Racks are 19" EIA-310-D Compliant Rack Mount Standard Width. You have your choice of heights from 76" to 90" and depths of 32" or 36".
Apple's Xserve servers will also securely mount in our Premium Two-Post Telco / Relay Racks. Our 2-Post Relay Racks also comply to Apple's requirement for EIA-310-D mounting rails, and Apply ships their Xserve along with center mount brackets to facilitate easy mounting to 2-Post Racks.
With an equipment load capacity over 1,000 lbs, these premium Two-Post Telco / Relay Racks will securely handle your Apple Xserve needs.
Reference to Apple's computer equipment is for identification purposes only. Apple does not manufacture nor is Apple in any way affiliated with the manufacture or sale of the computer cabinets mentioned herein. All computer cabinets mentioned herein are manufactured to fit Apple computer equipment.
]]>External Dimensions: | 23" W x 32" D x 76" H |
Internal Dimensions: | 19" W x 30.25"D x 70" H |
Rack Units: | 40U |
Weight Capacity: | 2,000 LBS |
Our Apple Xserve Server Racks, are configured to be compatible with your Apple Xserve rack mount equipment and most network equipment and computer server manufacturer's equipment.
]]>External Dimensions: | 23" W x 36" D x 76" H |
Internal Dimensions: | 19" W x 34.25" D x 70" H |
Rack Units: | 40U |
Weight Capacity: | 2,000 LBS |
Our Apple Xserve Server Racks, are configured to be compatible with your Apple Xserve rack mount equipment and most network equipment and computer server manufacturer's equipment.
]]>External Dimensions: | 23" W x 32" D x 83" H |
Internal Dimensions: | 19" W x 30.25"D x 77" H |
Rack Units: | 44U |
Weight Capacity: | 2,000 LBS |
Our Apple Xserve Server Racks, are configured to be compatible with your Apple Xserve rack mount equipment and most network equipment and computer server manufacturer's equipment.
]]>External Dimensions: | 23" W x 36" D x 83" H |
Internal Dimensions: | 19" W x 34.25" D x 77" H |
Rack Units: | 44U |
Weight Capacity: | 2,000 LBS |
Our Apple Xserve Server Racks, are configured to be compatible with your Apple Xserve rack mount equipment and most network equipment and computer server manufacturer's equipment.
]]>External Dimensions: | 23" W x 32" D x 90" H |
Internal Dimensions: | 19" W x 30.25"D x 84" H |
Rack Units: | 48U |
Weight Capacity: | 2,000 LBS |
Our Apple Xserve Server Racks, are configured to be compatible with your Apple Xserve rack mount equipment and most network equipment and computer server manufacturer's equipment.
]]>External Dimensions: | 23" W x 36" D x 90" H |
Internal Dimensions: | 19" W x 34.25" D x 84" H |
Rack Units: | 48U |
Weight Capacity: | 2,000 LBS |
Our Apple Xserve Server Racks, are configured to be compatible with your Apple Xserve rack mount equipment and most network equipment and computer server manufacturer's equipment.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 10 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (10) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 10 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (1.7"H x 17.4"W x 10.6"D) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 10.1 lbs |
Gross Weight | 11.2 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 10 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (10) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (10) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 10 x C19 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.2 in W x 24.8 in D x 3.5 in H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 10 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (10) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (10) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 10 x C19 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 10 x NEMA |
Local Meter | 3-digital LED current meter |
Overload Protection | 15-amp circuit breaker for NEMA 5-15P inlet |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 43.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 4.6 kg / 10.1 lb |
Gross Weight | 5.1 kg / 11.2 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 10 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 10 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 10 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 10 x NEMA 5-20R |
Local Meter | 3-digital LED current meter |
Overload Protection | 20-amp circuit breaker for NEMA L5-20P inlet |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 43.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 4.6 kg / 10.1 lb |
Gross Weight | 5.1 kg / 11.2 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 12 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 12 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (12) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 12 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (1.7"H x 17.4"W x 10.6"D) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 10.1 lbs |
Gross Weight | 11.2 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 12 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (12) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (12) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 12 x C19 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.2 in W x 24.8 in D x 3.5 in H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 12 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (12) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 12 x C19 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 12 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 12 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 12 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A (12A de-rated) |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 12 x NEMA 5-20R |
Local Meter | Field replaceable 1.8" color LCD |
Overload Protection | Hydraulic-magnetic Miniature Circuit Breaker (MCB) |
Transfer Time | 10ms Typical |
Electrical Endurance | 1 x 10^6 Operations |
PHYSICAL | |
Product (W x D x H) | 1.7"H x 17.4"W x 10.6"D |
Packing (W x D x H) | 5.9"H x 21.3"W x 21.3"D |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
ISO | 9001/14001 |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 12 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 12 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 12 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 12 x NEMA 5-20R |
Local Meter | 3-digital LED current meter |
Overload Protection | 20-amp circuit breaker for NEMA L5-20P inlet |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 87.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 5.5 kg / 12.1 lb |
Gross Weight | 6.8 kg / 15 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 16 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (16) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (16) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 16 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.2 in W x 24.8 in D x 3.5 in H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 16 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (16) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (16) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 16 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 30A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 16 x C13 2 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (16) C13 (2) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (16) C13 (2) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets |
|
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.2 in W x 24.8 in D x 3.5 in H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 16 x C13 2 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (16) C13 (2) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (16) C13 (2) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 2 x C19, 16 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 16 x C13 4 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (16) C13 (4) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (16) C13 (4) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets |
|
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.2 in W x 24.8 in D x 3.5 in H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 16 x C13 4 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (16) C13 (4) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (16) C13 (4) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 4 x C19, 16 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 16 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 16 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 16 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 12 x NEMA 5-15R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | 15A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 87.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 16 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 16 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 16 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 16 x NEMA |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 87.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 16 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 16 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 16 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 16 x NEMA 5-20R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 437.5 (W) x 300 (D) x 88.9 (H) mm |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 1 x 20A NEMA L6-20R connector with 3.3ft 12AWG H05V V-F cordset |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (1) 20A NEMA L6-20R connector with 3.3ft 12AWG H05V V-F cordset |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (1) 20A NEMA L6-20R connector with 3.3ft 12AWG H05V V-F cordset |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 1 x 30A NEMA L6-30R connector with 3.3ft 4.0inch sq. H05V V-F cordset |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 30A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (1) 30A NEMA L6-30R connector with 3.3ft 10AWG H05V V-F cordset |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (1) 30A NEMA L6-30R connector with 3.3ft 10AWG H05V V-F cordset |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 30A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 20 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (20) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (20) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 20 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.2 in W x 24.8 in D x 3.5 in H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 20 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (20) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (20) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 16 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 30A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 20 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 20 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 20 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 20 x NEMA 5-20R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | 15A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 87.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
ISO | 9001 / 14001 |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 20 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 20 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 20 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 20 x NEMA 5-20R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 87.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 0~95%, non-condensing |
Storage Humidity | 0~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
ISO | 9001 / 14001 |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 20 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 20 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 20 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 20 x NEMA 5-20R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 437.5 (W) x 300 (D) x 88.9 (H) mm |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 24 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (24) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (24) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 24 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.2 in W x 24.8 in D x 3.5 in H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 24 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (24) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (24) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 24 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 24 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-15P |
Outlets | 24 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 24 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 15A |
Input Frequency | 50/60Hz |
Inlet | 2 x 5-15P |
Outlets | 24 x NEMA 5-20R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | 15A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 87.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
ISO | 9001 / 14001 |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 24 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 24 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 24 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-20P |
Outlets | 24 x NEMA 5-20R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 442 x 270 x 87.5 mm ( W x D x H ) |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC & CE certified |
Safety | LVD Certified |
ISO | 9001 / 14001 |
Environment | RoHS2 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 24 x 5-20R |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 24 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 21 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 24 x 5-20R |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22.0 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L5-30P |
Outlets | 24 x NEMA 5-20R |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | 437.5 (W) x 300 (D) x 88.9 (H) mm |
Packing (W x D x H) | 540 x 540 x 150 mm ( W x D x H ) |
Net Weight | 6.5 kg / 14.3 lb |
Gross Weight | 7.0 kg / 15.4 lb |
Chassis Color | Dark |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 6 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 6 x C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (6) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 6 x C19 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (1.7"H x 17.4"W x 10.6"D) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 10.1 lbs |
Gross Weight | 11.2 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 8 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (8) C13 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 8 x C13 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (1.7"H x 17.4"W x 10.6"D) |
Packing (W x D x H) | 19.7"W x 21.3"D x 5.9"H) |
Net Weight | 10.1 lbs |
Gross Weight | 11.2 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 8 x C13 1 x C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (8) C13 (1) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (1.7"H x 17.4"W x 10.6"D) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 10.1 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 2 x C19 8 x C13 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 8 x C13 2 x C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (8) C13 (1) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (1.7"H x 17.4"W x 10.6"D) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 10.1 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 110V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 8 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 12.5 lbs |
Gross Weight | 13.6 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 8 x C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | (8) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 1.7"H) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 15.4 lbs |
Gross Weight | 16.5 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 20A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-20P |
Outlets | 8 x C19 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (1) 20A hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (1.7"H x 17.4"W x 10.6"D) |
Packing (W x D x H) | (19.7"W x 21.3"D x 5.9"H) |
Net Weight | 10.1 lbs |
Gross Weight | 11.2 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 8 x C19 |
Local Meter | 1.8 color LCD |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 11.8"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 16.7 lbs |
Gross Weight | 17.8 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (8) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS ( iATS ) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | (8) C19 |
Local Meter | 2.0” color LCD with touchscreen |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 17.7"D x 3.4"H) |
Packing (W x D x H) | (21.7"W x 21.7"D x 5.9"H) |
Net Weight | 20.9 lbs |
Gross Weight | 22 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | Tested to UL standard |
Environment | RoHS3 & REACH compliant |
Most data centers provide power source redundancy to ensure critical devices have no power-related downtime. Many rackmount IT devices, however, are not designed to take advantage of power redundancy. For single-corded devices, ATS is a perfect fit to provide power failover. Intelligent ATS (iATS) also allows users to switch power input over IP, provide accurate time power monitoring, and helps users with power capacity planning.
]]>ELECTRICAL | |
Nominal Input Voltage | 208V |
Acceptable Input Voltage | ±10% Nominal |
Amperage | 30A |
Input Frequency | 50/60Hz |
Inlet | 2 x L6-30P |
Outlets | 8 x C19 |
Local Meter | 3-digit LED ammeter measuring input load current |
Overload Protection | (2) 16A single pole hydraulic MCB |
Transfer Time | 10 - 16ms typical |
Electrical Endurance | 1 x 10^5 Operations |
PHYSICAL | |
Product (W x D x H) | (17.4"W x 10.6"D x 3.4"H) |
Packing (W x D x H) | (21.3"W x 21.3"D x 5.9"H) |
Net Weight | 14.3 lbs |
Gross Weight | 15.4 lbs |
Chassis Color | Black |
Chassis Material | Steel |
ENVIRONMENTAL | |
Operating Temperature | 23 to 140°F (-5 to 60°C) |
Storage Temperature | 13 to 149°F (-25 to 65°C) |
Operating Humidity | 8~95%, non-condensing |
Storage Humidity | 8~95%, non-condensing |
COMPLIANCE | |
EMC | FCC Part 15 Subpart B |
Safety | |
Environment | RoHS3 & REACH compliant |
InfraPower Metered Automatic Transfer Switch with dual power input provides reliable and redundant power for single-corded equipment. By the input preference switch, users can define the preferred power source. If the primary source is unavailable, the ATS will seamlessly source power from the secondary source without power interruption and downtime. The entire ATS series are designed with a local current meter to easily observe power status and device load.
]]>Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
InfraGuard provides an environmental monitoring solution to secure high levels of data center operational stability and flexibility. It also gives a free integrated platform for today’s data centers. User can remotely manage the environment and conditions in racks via IP. This can help reducing manpower and travel costs by negating the need for staff to actually be at the rack location.
]]>Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Benefits and Features
Avocent DPDU101-001 Direct PDU Power Strip Diagram
Avocent DPDU101-001 Specifications:
Mechanical | |
Height | 2.21 in. (5.61 cm.) |
Width | 23 in. (58.42 cm.) |
Depth | 1.5 in. (3.81 cm.) |
Weight | 4.2 lb. (1.91 kg.) |
Mounting | Vertical |
Input | |
Input Voltage | 15A |
Max. branch circuit rating | 115V |
Input Connector | NEMA 5-15P |
Output | |
Max. output current per outlet | 15A |
Output Connector | NEMA 5-15/20r |
Interfaces | |
Serial Port | N |
Network Port | 10/100 |
Environmental | |
Operating Temperature | 32-104F |
Storage Temperature | 5-122F |
Certifications | FCC, UL, cUL, CE, C-Tick |
The Avocent DPDU101-001 is a Direct_PDU power strip that is designed for small to medium businesses, and provides IT administrators with a simple and cost effective way to remotely manage the power requirements of their IT infrastructure. Direct_PDU power strips have an on-board web interface for direct access over any IP network. Other features include individual power "On/Off" control, power consumption metering, overload protection, and 0U and 1U mounting options. The power strip has built-in alarms to notify the administrator when user-defined thresholds are reached via SNMP traps and e-mail notification. The Direct_PDU power strip is available in 8 and 16 port vertical mount (0U), and 8 port horizontal mount (1U) units.]]>
Avocent DPDU102-001 Direct PDU Power Strip Diagram
Avocent DPDU102-001 Specifications:
Mechanical | |
Height | 2.21 in. (5.61 cm.) |
Width | 49.02 in. (124.51 cm.) |
Depth | 1.74 in. (4.42 cm.) |
Weight | 8.4 lb. (3.82 kg.) |
Mounting | Vertical |
Input | |
Input Voltage | 20A |
Max. branch circuit rating | 115V |
Input Connector | NEMA 5-20P |
Output | |
Max. output current per outlet | 20A |
Output Connector | NEMA 5-15/20r |
Interfaces | |
Serial Port | N |
Network Port | 10/100 |
Environmental | |
Operating Temperature | 32-104F |
Storage Temperature | 5-122F |
Certifications | FCC, UL, cUL, CE, C-Tick |
The Avocent DPDU102-001 is a Direct_PDU power strip that is designed for small to medium businesses, and provides IT administrators with a simple and cost effective way to remotely manage the power requirements of their IT infrastructure. Direct_PDU power strips have an on-board web interface for direct access over any IP network. Other features include individual power "On/Off" control, power consumption metering, overload protection, and 0U and 1U mounting options. The power strip has built-in alarms to notify the administrator when user-defined thresholds are reached via SNMP traps and e-mail notification. The Direct_PDU power strip is available in 8 and 16 port vertical mount (0U), and 8 port horizontal mount (1U) units.]]>
Avocent DPDU103-001 Direct PDU Power Strip Diagram
Avocent DPDU103-001 Specifications:
Mechanical | |
Height | 1.74 in. (4.42 cm.) |
Width | 17.01 in. (43.21 cm.) |
Depth | 3.55 in. (9.02 cm.) |
Weight | 5.08 lb. (2.31 kg.) |
Mounting | Vertical |
Input | |
Input Voltage | 15A |
Max. branch circuit rating | 115V |
Input Connector | NEMA 5-15/20r |
Output | |
Max. output current per outlet | 15A |
Output Connector | NEMA 5-15/20r |
Interfaces | |
Serial Port | N |
Network Port | 10/100 |
Environmental | |
Operating Temperature | 32-104F |
Storage Temperature | 5-122F |
Certifications | FCC, UL, cUL, CE, C-Tick |
The Avocent DPDU103-001 is a Direct_PDU power strip that is designed for small to medium businesses, and provides IT administrators with a simple and cost effective way to remotely manage the power requirements of their IT infrastructure. Direct_PDU power strips have an on-board web interface for direct access over any IP network. Other features include individual power "On/Off" control, power consumption metering, overload protection, and 0U and 1U mounting options. The power strip has built-in alarms to notify the administrator when user-defined thresholds are reached via SNMP traps and e-mail notification. The Direct_PDU power strip is available in 8 and 16 port vertical mount (0U), and 8 port horizontal mount (1U) units.]]>
Avocent DPDU201-001 Direct PDU Power Strip Diagram
Avocent DPDU201-001 Specifications:
Mechanical | |
Height | 2.21 in. (5.61 cm.) |
Width | 23 in. (58.42 cm.) |
Depth | 1.5 in. (3.81 cm.) |
Weight | 4.2 lb. (1.91 kg.) |
Mounting | Vertical |
Input | |
Input Voltage | 16A |
Max. branch circuit rating | 230V |
Input Connector | IEC 320 |
Output | |
Max. output current per outlet | 10A |
Output Connector | C13r |
Interfaces | |
Serial Port | N |
Network Port | 10/100 |
Environmental | |
Operating Temperature | 32-104F |
Storage Temperature | 5-122F |
Certifications | FCC, UL, cUL, CE, C-Tick |
The Avocent DPDU201-001 is a Direct_PDU power strip that is designed for small to medium businesses, and provides IT administrators with a simple and cost effective way to remotely manage the power requirements of their IT infrastructure. Direct_PDU power strips have an on-board web interface for direct access over any IP network. Other features include individual power "On/Off" control, power consumption metering, overload protection, and 0U and 1U mounting options. The power strip has built-in alarms to notify the administrator when user-defined thresholds are reached via SNMP traps and e-mail notification. The Direct_PDU power strip is available in 8 and 16 port vertical mount (0U), and 8 port horizontal mount (1U) units.]]>
Avocent DPDU202-001 Direct PDU Power Strip Diagram
Avocent DPDU202-001 Specifications:
Mechanical | |
Height | 2.21 in. (5.61 cm.) |
Width | 49.02 in. (124.51 cm.) |
Depth | 1.74 in. (4.42 cm.) |
Weight | 8.4 lb. (3.82 kg.) |
Mounting | Vertical |
Input | |
Input Voltage | 16A |
Max. branch circuit rating | 230V |
Input Connector | IEC 320 |
Output | |
Max. output current per outlet | 10A |
Output Connector | C13r |
Interfaces | |
Serial Port | N |
Network Port | 10/100 |
Environmental | |
Operating Temperature | 32-104F |
Storage Temperature | 5-122F |
Certifications | FCC, UL, cUL, CE, C-Tick |
The Avocent DPDU202-001 is a Direct_PDU power strip that is designed for small to medium businesses, and provides IT administrators with a simple and cost effective way to remotely manage the power requirements of their IT infrastructure. Direct_PDU power strips have an on-board web interface for direct access over any IP network. Other features include individual power "On/Off" control, power consumption metering, overload protection, and 0U and 1U mounting options. The power strip has built-in alarms to notify the administrator when user-defined thresholds are reached via SNMP traps and e-mail notification. The Direct_PDU power strip is available in 8 and 16 port vertical mount (0U), and 8 port horizontal mount (1U) units.]]>
Avocent DPDU203-001 Direct PDU Power Strip Diagram
Avocent DPDU203-001 Specifications:
Mechanical | |
Height | 1.74 in. (4.42 cm.) |
Width | 17.01 in. (43.21 cm.) |
Depth | 3.55 in. (9.02 cm.) |
Weight | 5.08 lb. (2.31 kg.) |
Mounting | Horizontal |
Input | |
Input Voltage | 16A |
Max. branch circuit rating | 230V |
Input Connector | IEC 320 |
Output | |
Max. output current per outlet | 10A |
Output Connector | C13r |
Interfaces | |
Serial Port | N |
Network Port | 10/100 |
Environmental | |
Operating Temperature | 32-104F |
Storage Temperature | 5-122F |
Certifications | FCC, UL, cUL, CE, C-Tick |
The Avocent DPDU203-001 is a Direct_PDU power strip that is designed for small to medium businesses, and provides IT administrators with a simple and cost effective way to remotely manage the power requirements of their IT infrastructure. Direct_PDU power strips have an on-board web interface for direct access over any IP network. Other features include individual power "On/Off" control, power consumption metering, overload protection, and 0U and 1U mounting options. The power strip has built-in alarms to notify the administrator when user-defined thresholds are reached via SNMP traps and e-mail notification. The Direct_PDU power strip is available in 8 and 16 port vertical mount (0U), and 8 port horizontal mount (1U) units.]]>
Avocent PM2001H-401 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US single phase 208-240VAC 2W + PE 60HZ |
Input Current | 24A |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 8A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM2001H-401 is a 1U Horizontal 1-ph 24A 208V, fixed cord with L6-30, 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM2001H-401 Application Diagram
Avocent PM2001V-401 Close-Up View
Avocent PM2001V-401 Features:
Avocent PM2001V-401 Application Diagram
Avocent PM2001V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US single phase 208-240VAC 2W + PE 60HZz |
Input Current | 24A |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 8A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM2001V-401 is a 0U Vertical 1-ph 24A 208V with L6-30, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM2002H-401 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM2002H-401 is a 1U Horizontal 3-ph 24A 208V, fixed cord with L15-30, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM2002H-401 Application Diagram
Avocent PM2002V-401 Close-Up View
Avocent PM2002V-401 Features:
Avocent PM2002V-401 Application Diagram
Avocent PM2002V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 12A per bank.
The Avocent PM2002V-401 is a 0U Vertical 3-ph 24A 208V with L15-30, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM2005H-403 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 40A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 32A |
Listed Branch Circuit Protection | 50A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 13A per bank.
The Avocent PM2005H-403 is a 1U Horizontal 3-ph 40A 208V, with Hubbell CS8365C, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM2005H-403 Application Diagram
]]>Avocent PM2005H-404 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 48A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 27.71A |
Listed Branch Circuit Protection | 60A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 23A per bank.
The Avocent PM2005H-404 is a 1U Horizontal 3-ph 48A 208V, with IEC 309 60A, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM2005H-404 Application Diagram
]]>Avocent PM2005V-403 Close-Up View
Avocent PM2005V-403 Features:
Avocent PM2005V-403 Application Diagram
Avocent PM2005V-403 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 40A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 32A |
Listed Branch Circuit Protection | 50A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 13A per bank.
The Avocent PM2005V-403 is a 0U Vertical 3-ph 40A 208V with Hubbell CS8365C, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM2005V-404 Close-Up View
Avocent PM2005V-404 Features:
Avocent PM2005V-404 Application Diagram
Avocent PM2005V-404 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 48A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 27.71A |
Listed Branch Circuit Protection | 60A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 23A per bank.
The Avocent PM2005V-404 is a 0U Vertical 3-ph 48A 208V with IEC 309 60A, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM2006H-401 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM2006H-401 is a 1U Horizontal 3-ph 24A 208V, fixed cord with L21-30, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM2006H-401 Application Diagram
]]>Avocent PM2006V-401 Close-Up View
Avocent PM2006V-401 Features:
Avocent PM2006V-401 Application Diagram
Avocent PM2006V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 12A per bank.
The Avocent PM2006V-401 is a 0U Vertical 3-ph 24A 208V with L21-30, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM3001V-401 Close-Up View
Avocent PM3001V-401 Features:
Avocent PM3001V-401 Application Diagram
Avocent PM3001V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US single phase 208-240VAC 2W + PE 60HZz |
Input Current | 24A |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 8A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM3001V-401 is a 0U Vertical 1-ph 24A 208V with L6-30, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM3002H-401 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM3002H-401 is a 1U Horizontal 3-ph 24A 208V, fixed cord with L15-30, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM3002H-401 Application Diagram
]]>Avocent PM3002V-401 Close-Up View
Avocent PM3002V-401 Features:
Avocent PM3002V-401 Application Diagram
Avocent PM3002V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 12A per bank.
The Avocent PM3002V-401 is a 0U Vertical 3-ph 24A 208V with L15-30, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM3005H-403 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 40A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 32A |
Listed Branch Circuit Protection | 50A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 13A per bank.
The Avocent PM3005H-403 is a 1U Horizontal 3-ph 40A 208V, with Hubbell CS8365C, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM3005H-403 Application Diagram
]]>Avocent PM3005H-404 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 48A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 27.71A |
Listed Branch Circuit Protection | 60A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 23A per bank.
The Avocent PM3005H-404 is a 1U Horizontal 3-ph 48A 208V, with IEC 309 60A, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM3005H-404 Application Diagram
]]>Avocent PM3005V-403 Close-Up View
Avocent PM3005V-403 Features:
Avocent PM3005V-403 Application Diagram
Avocent PM3005V-403 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 40A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 32A |
Listed Branch Circuit Protection | 50A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 13A per bank.
The Avocent PM3005V-403 is a 0U Vertical 3-ph 40A 208V with Hubbell CS8365C, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM3005V-404 Close-Up View
Avocent PM3005V-404 Features:
Avocent PM3005V-404 Application Diagram
Avocent PM3005V-404 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 48A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 32A* |
Bank Max Balanced Current | 27.71A |
Listed Branch Circuit Protection | 60A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 32A, the other two banks shall not exceed 23A per bank.
The Avocent PM3005V-404 is a 0U Vertical 3-ph 48A 208V with IEC 309 60A, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM3006H-401 Specifications:
Mechanical | |
Height | 1.719 in. (4.4 cm.) |
Width | 17 in. (43.2 cm.) |
Depth | 8.272 in. (21 cm.) |
Weight | 7.3 lbs. (3.3 kg.) *without power cord |
Form Factor | 1U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM3006H-401 is a 1U Horizontal 3-ph 24A 208V, fixed cord with L21-30, 6 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
Avocent PM3006H-401 Application Diagram
]]>Avocent PM3006V-401 Close-Up View
Avocent PM3006V-401 Features:
Avocent PM3006V-401 Application Diagram
Avocent PM3006V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8.0 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66.0 in. (167.6 cm.) |
Weight | 14.8 lbs. (6.71 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US three phase Delta 208- 240 VAC 3W + PE 60Hz |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 12A per bank.
The Avocent PM3006V-401 is a 0U Vertical 3-ph 24A 208V with L21-30, 21 C13 & 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM1001V-401 Application Diagram
Avocent PM1001V-401 Features:Avocent PM1001V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66 in. (167.6 cm.) |
Weight | 14.8 lbs. (3.3 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US single phase 208-240VAC 2W + PE 60HZ |
Input Current | 24A |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 8A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM1001V-401 is a 0U Vertical 1-ph 24A 208V, fixed cord with L6-30, 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM1002V-401 Application Diagram
Avocent PM1002V-401 Features:Avocent PM1002V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66 in. (167.6 cm.) |
Weight | 14.8 lbs. (3.3 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US 3 phase 208-240VAC 2W + PE 60HZ |
Input Current | 24A |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 8A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM1002V-401 is a 0U Vertical 3-ph 24A 208V, fixed cord with L21-30, 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM1003V-401 Application Diagram
Avocent PM1003V-401 Features:Avocent PM1003V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66 in. (167.6 cm.) |
Weight | 14.8 lbs. (3.3 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US 3 phase Delta 208-240VAC 3W + PE 60HZ |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM1003V-401 is a 0U Vertical 3-ph 40A 208V, fixed cord with L21-30, 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM1004V-401 Application Diagram
Avocent PM1004V-401 Features:Avocent PM1004V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66 in. (167.6 cm.) |
Weight | 14.8 lbs. (3.3 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US 3 phase Delta 208-240VAC 3W + PE 60HZ |
Input Current | 24A per phase |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A (C19) 12A (C13) |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 13.85A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM1004V-401 is a 0U Vertical 3-ph 48A 208V, fixed cord with IEC309, 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>Avocent PM1008V-401 Application Diagram
Avocent PM1008V-401 Features:Avocent PM1008V-401 Specifications:
Mechanical | |
Height | 3.15 in. (8 cm.) |
Width | 2.2 in. (5.6 cm.) |
Depth | 66 in. (167.6 cm.) |
Weight | 14.8 lbs. (3.3 kg.) *without power cord |
Form Factor | 0U |
Environmental | |
Operating Temperature | 10-50ºC |
Storage Temperature | -40-65ºC |
Relative Humidity | 20 to 80 percent operating, 5 to 95 percent non-operating |
Input | |
Input Voltage | US 3 phase Delta 208-240VAC 3W + PE 60HZ |
Input Current | 24A |
Output | |
Output Voltage | 208-240VAC 60Hz |
Current | |
Outlet Max Current | 16A |
Bank Max Unbalanced Current | 16A* |
Bank Max Balanced Current | 8A |
Listed Branch Circuit Protection | 30A |
Network Connection | Number 1 |
Safety Markings and Approvals | UL, FCC, cUL, CE, VCCI, C-Tick, CB |
NOTES:
*When one bank is at a maximum 16A, the other two banks shall not exceed 8A total.
The Avocent PM1008V-401 is a 0U Vertical 3-ph 24A 208V, fixed cord with L15-30, 3 C19 ports Power Management PDU. This intelligent Power Distribution unit (IPDU) supports outlet level metering and switching capability to provide datacenter professionals the tools they need to monitor, reduce, and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow datacenter teams to know before problems occur and minimize downtime caused by overloaded circuits.
The ability to integrate with the DSView3 management software enables IT managers to have a consolidated interface to access and manage their IT equipment and also the supporting power infrastructure. The optional DSView 3 Power Manager further enhances this by allowing historical reporting to track power consumption, capacity and cost across individual PDUs, racks, rows of racks, or entire data centers.
]]>For local metering, view our Metered PDU selection. If you require remote monitoring and metering, browse our Monitored PDU selection. For more robust remote monitoring and/or remote reboot functionality, please see our Switched PDU selection. For even more detailed metering, monitoring and reboot functionality at the outlet-level, try Outlet-Level Intelligent PDUs.
Browse some of the more popular Basic rack PDUs below by input voltage, or call Server Racks Online at 1-866-722-5776 to speak to a PDU expert about your server rack power needs.
jump to: 120V Input
208V Input
110/240V Input
208-240V 3-Phase Input
Manufacturer | Input Plug | Form Factor | Nominal Power | Outlets | Image | More Info |
15 AMP - Derated to 12 AMPs | ||||||
APC AP9567 | 5-15P | 0U | 1.4 kW | 14 x 5-15 | ||
Eaton ePBZ75 | 5-15P | 0U | 1.4 kW | 14 x 5-15R | ||
Tripp Lite PDUV15 | 5-15P | 0U | 1.4 kW | 14 x 5-15R | ||
Tripp Lite PDU1415 | 5-15P | 0U | 1.9 kW | 14 x 5-15R | ||
Eaton ePBZ89 | C14 | 0U | 1.4 kW | 16 x C13 | ||
Eaton ePBZ73 | 5-15P | 0U | 1.4 kW | 18 x 5-15R | ||
Eaton EPBZ98 | 5-15P | 0U | 1.4 kW | 18 x 5-15R | ||
APC AP9562 | 5-15P | 1U | 1.4 kW | 10 x 5-15 | ||
Eaton ePBZ83 | 5-15P | 1U | 1.4 kW | 12 x 5-15R | ||
Eaton ePBZ86 | 5-15P | 1U | 1.4 kW | 12 x 5-15R | ||
Tripp Lite PDU1215 | 5-15P | 1U | 1.9 kW | 13 x 5-15R | ||
20 AMP - Derated to 16 AMPs | ||||||
APC AP9551 | L5-20P | 0U | 1.9 kW | 14 x 5-15 | ||
Eaton ePBZ74 | 5-20P/L5-20P | 0U | 1.9 kW | 14 x 5-20R | ||
Tripp Lite PDU1420T | L5-20P | 0U | 2.4 kW | 14 x 5-20R | ||
Tripp Lite PDUV20 | 5-20P/L5-20P | 0U | 1.9 kW | 14 x 5-20R | ||
Eaton ePBZ72 | 5-20P/L5-20P | 0U | 1.9 kW | 18 x 5-20R | ||
APC AP7530 | L5-20P | 0U | 1.9 kW | 24 x 5-20 | ||
Eaton ePBZ77 | L5-20P | 0U | 1.9 kW | 24 x 5-20R | ||
Eaton EPBZ96 | L5-20P | 0U | 1.9 kW | 24 x 5-20R | ||
Eaton EPBZ97 | 5-20P | 0U | 1.9 kW | 24 x 5-20R | ||
Eaton ePBZ71 | 5-20P/L5-20P | 0U | 1.9 kW | 30 x 5-20R | ||
Tripp Lite PDU40TDUAL | 5-20P/L5-20P | 0U | 1.9 kW | 40 x 5-20R | ||
APC AP9563 | 5-20P | 1U | 1.9 kW | 10 x 5-20 | ||
APC AP9564 | L5-20P | 1U | 1.9 kW | 10 x 5-20 | ||
Server Tech CB-12H1-C20 | L6-20P, 5-15P, 5-20P or L5-20P | 1U | 1.9 kW | 12 x 5-20R | ||
Eaton ePBZ82 | L5-20P/5-20P | 1U | 1.9 kW | 12 x 5-20R | ||
Eaton ePBZ85 | 5-20P | 1U | 1.9 kW | 12 x 5-20R | ||
Eaton ePBZ99 | L5-20P | 1U | 1.9 kW | 12 x 5-20R | ||
Eaton PW103BA1U405 | C20 | 1U | 1.9 kW | 12 x 5-20R | ||
Eaton ePBZ88 | C20 | 1U | 1.9 kW | 10 x C13 2 x C19 | ||
Tripp Lite PDU1220 | 5-20P | 1U | 2.4 kW | 13 x 5-20R | ||
Tripp Lite PDU1220T | L5-20P | 1U | 2.4 kW | 13 x 5-20R | ||
30 AMP - Derated to 24 AMPs | ||||||
Eaton ePBZ90 | L5-30P | 0U | 2.9 kW | 24 x 5-20R | ||
APC AP7532 | L5-30P | 0U | 2.9 kW | 24 x 5-20 | ||
Eaton ePBZ84 | L5-30P | 1U | 2.9 kW | 10 x 5-20R | ||
APC AP9560 | L5-30P | 1U | 2.9 kW | 10 x 5-20 | ||
Server Tech CB-12H1-L530 | L5-30P | 1U | 2.9 kW | 12 x 5-20R | ||
Eaton ePBZ78 | L5-30P | 1U | 2.9 kW | 20 x 5-20R | ||
Tripp Lite PDU2430 | L5-30P | 1U | 2.9 kW | 24 x 5-15R | ||
APC AP7583 | L14-30P | 2U | 2.9 kW | 4 x L5-20 | ||
APC AP7580 | L14-30P | 2U | 2.9 kW | 4 x L5-30 | ||
Eaton PW105BA2U422 | L14-30P | 2U | 2.9 kW | 12 x 5-20R |
Manufacturer | Input Plug | Form Factor | Nominal Power | Outlets | Image | More Info | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
15 AMP - Derated to 12 AMPs | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Eaton ePBZ89 | C14 | 0U | 2.5 kW | 16 x C13 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 AMP - Derated to 16 AMPs | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
APC AP9572 | IEC C20 | 0U | 3.3 kW | 15 x C13 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
APC AP7540 | L6-20P | 0U | 3.3 kW | 20 x C13 4 x C19 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Eaton EPBZ93 | L6-20P | 0U | 3.3 kW | 20 x C13 4 x C19 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
APC AP9559 | C20 | 1U | 3.3 kW | 10 x C13 2 x C19 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
APC AP9566 | L6-20P | 1U | 3.3 kW | 12 x C13 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Belkin 2-Post & 4-Post Server Racks
Belkin Wall Mount 2-Post Relay Racks
Belkin Rackmount AccessoriesBelkin offers an array of rackmount accessories which include rackmount shelves, cable management, casters, blanking panels, rackmount fans and power distribution units.
|
Belkin Wallmount Cabinet | Height | Depth* | Rails | Width* |
Belkin RK1003 | 12U | 24" | 19" EIA | 21" |
Belkin Rack Enclosures | Height | Depth* | Rails | Width* |
Belkin RK1002 | 24U | 42" | 19" EIA | 24" |
Belkin Rack Enclosures | Height | Depth* | Rails | Width* |
Belkin RK1004 | 13U | 32" | 19" EIA | 24" |
The Belkin F4D144 is a 19" Wall Mount Swing-Away Relay Rack which swings open to give you easy access to your components. Easy installation and ideal for space limited environments.
Dimensions: 24"H x 12"D
Features:
Dimensions: 36"H x 18"D
Features:
Dimensions: 48"H x 18"D
Features:
Belkin Relay Racks | Height | Depth* | Rails | Width* |
Belkin RK2001 | 24U | 3.5" | 19" EIA | 20.3" |
Belkin RK2000 | 42U | 3.5" | 19" EIA | 20.3" |
External Dimensions: 80"Hx 24"Wx 42"D
Rackmount Width: EIA 19"
The Belkin RK1000 provides added security for your critical networking equipment. Engineered to be exceptionally sturdy, it has been strength-tested to hold up to 2,200 pounds. Adjustable mounting rails accommodate equipment of varying depths, and horizontal channel markings ensure accurate rail adjustment. The RK1000 enclosure also includes lockable doors and side panels that can be removed for convenient equipment access.
Belkin RK1000 Advantages:
Belkin RK1000 Specifications:
w/ Mesh doors and solid side panels
]]>The Belkin RK1002 provides added security for your critical networking equipment. Engineered to be exceptionally sturdy, it has been strength-tested to hold up to 2,000 pounds. Adjustable mounting rails accommodate equipment of varying depths, and horizontal channel markings ensure accurate rail adjustment. The RK1002 enclosure also includes lockable doors and side panels that can be removed for convenient equipment access.
Belkin RK1002 Advantages:
Belkin RK1002 Specifications:
Plexiglas locking front door, adjustable depth
]]>Belkin RK1003 Specifications:
Belkin RK1003 Package Includes:
Note: Wall mount hardware not included.
]]>Plexiglas locking front door, adjustable depth
]]>Belkin RK1004 Specifications:
The Belkin RK2000 is an open 2-Post Racks that provides an economical, stable, and durable solution for securing patch panels, switches, cabling, and other rack-mountable networking equipment.
Belkin RK2000 Advantages:
Belkin RK2000 Specifications:
Belkin RK2001 Specifications:
The Belkin RK4000 4-Post Rack is designed to securely hold heavier rack-mountable computer and data-storage equipment such as servers.
Belkin RK4000 Advantages:
Belkin RK4000 Specifications:
The Belkin RK5004 is a replacement top panel for Belkin Enclosure models RK1000 and RK1001 and features three 3-inch muffin fans for enhanced cooling.
Dimensions: 4"H x 14"W x 22"D
Fan Size: 3" Diameter
Color: Black
Features:
The Belkin RK5005 is a replacement top panel for Belkin enclosure models RK1000 and RK1001 which features a single 10-inch fan for enhanced cooling.
Dimensions: 4"H x 14"W x 22"D
Fan Size: 10" Diameter
Color: Black
Features:
Belkin RK5006 Specifications:
Dimensions | |
Height | 4 in.(101 mm.) |
Width | 14 in. (355 mm.) |
Depth | 22 in.(558 mm.) |
Shipping Dimensions | |
Height | 5 in. (127 mm.) |
Width | 15 in. (381 mm.) |
Depth | 23 in.(584 mm.) |
Shipping weight | 16 lbs. |
Color | Black |
Number of fans | 2 |
Airflow | 1100 CFM |
Fan Diamenter | 10 in. (254 mm.) |
Warranty | Lifetime, standard |
The Belkin RK5007 is a Fan Unit for Wall-mount Enclosures which features Two 3-inch muffin-fan cooling unit designed especially for the cooling requirements of our Wall-Mount Enclosure.
Dimensions: 3"H x 7.5"W x 16"D
Fan Size: 3" Diameter
Color: Black
Features:
The Belkin RK5012 is a 1U Double-Sided Horizontal Cable Manager which provides pathways for routing patch cables to network equipment. It ensures a neater and more organized cable routing within the network application.
Dimensions: 1.75"H x 19"W x 4.5"D
Color: Black
Features:
The Belkin RK5013 double sided 2U cable manager mounts horizontally within an EIA 19" enclosure. This cable manager provides pathways for guiding and routing patch cables to network equipment. The unit ensures neater and organized cable routing within the network application of your data center. This unit comes with a standard lifetime warranty.
Belkin RK5013 Specifications:
Dimensions | |
Height | 2U, 3.5 in.(88.9 mm.) |
Width | 19 in. (482 mm.) |
Depth | 4.5 in.(114.3 mm.) |
Shipping Dimensions | |
Height | 19 in. (482 mm.) |
Width | 3.75 in. (95.2 mm.) |
Depth | 5.5 in.(139.7 mm.) |
Shipping weight | 3 lbs. |
Color | Black |
Warranty | Lifetime, standard |
Dimensions: 84"H x 8"W x 6"D
Color: Black
Features:
Dimensions: 1.75"H x 19"W x 2"D
Rack Units: 1U
Rack Size: 19"
Color: Black
Features:
Belkin RK5017 Specifications:
Shipping Dimensions | |
Height | 2.28 in. (57.9 mm.) |
Width | 6.5 in. (165 mm.) |
Depth | 20 in.(508 mm.) |
Shipping weight | 2 lbs. |
Color | Black |
Warranty | Lifetime, standard |
Features:
The Belkin RK5019 is a 32" deep Sliding Rackmount Shelf which is designed to support up to 110 pounds in the Belkin Enclosure or 4-Post Rack. This shelf slides out for easy access to equipment.
Features:
Features:
Dimensions: 4.25"H x 20"W x 18"D
Rack Size: 19"
Color: Black
Features:
Dimensions: 3.5"H x 20"W x 18"D
Rack Size: 19"
Color: Black
Features:
The Belkin RK5026 is an 30" deep Double-Sided 2-Post Shelves. These Rackmount Shelves provide a way to store non-rack-mountable equipment within a 2-post rack.
Dimensions: 3.5"H x 20"W x 30"D
Rack Size: 19"
Color: Black
Features:
Dimensions: 4.5"H x 20"W x 21.25"D
Rack Size: 19"
Features:
The Belkin RK5030 blanking panel set comes with 6 panels to fill unused space in your enclosure. This set includes 2 filler panels in each of the following sizes: 1U, 2U and 3U. These units mount horizontally within an EIA 19" server rack. Blanking panels block hot air from flowing to the front of your server rack enclosure, keeping your data center equipment clean, organized, and prevents overheating. This unit comes with a standard lifetime warranty.
Belkin RK5030 Specifications:
Dimensions | |
Height | 1U, 2U and 3U |
Width | 19 in. (482 mm.) |
Shipping Dimensions | |
Packaged quantity | 6 |
Height | 1 in. (25.4 mm.) |
Width | 5 in. (127 mm.) |
Depth | 2.5 in.(63.5 mm.) |
Shipping weight | 9 lbs. |
Color | Black |
Warranty | Lifetime, standard |
Belkin RK5031 Specifications:
Dimensions | |
Height | 1.75 in. (44.45 mm.) |
Width | 19 in. (482 mm.) |
Shipping Dimensions | |
Packaged quantity | 2 |
Shipping weight | 2.1 lbs. |
Color | Black |
Warranty | Lifetime, standard |
The Belkin RK5032 blanking panel set comes with 2 panels which are used to fill unused space in your enclosure. This set includes 2U size filler panels. These units mount horizontally within an EIA 19" server rack. Blanking panels block hot air from flowing to the front of your server rack enclosure, keeping your data center equipment clean, organized, and prevents overheating. This unit comes with a standard lifetime warranty.
Belkin RK5032 Specifications:
Dimensions | |
Height | 3.5 in. (88.9 mm.) |
Width | 19 in. (482 mm.) |
Shipping Dimensions | |
Packaged quantity | 2 |
Depth | 21.5 in.(546 mm.) |
Shipping weight | 4 lbs. |
Color | Black |
Warranty | Lifetime, standard |
Features:
The Belkin RK5035 is a set of 4 heavy-duty encolsure casters and are made to use with all Belkin 42U Enclosures.
NOTE: Not compatible with 2 and 4 Post Racks
Features:
The Belkin RK5001 is a Horizontal Cable Manager which provides a pathway for routing patch cables within a Belkin Enclosure. Mounts to the inner top of the Enclosure. Provides for a neater and more organized cable routing within the network application.
Dimensions: 6.05"H x 16"W x 3.5"D
Color: Black
The Belkin RK5029 is a Heavy-Duty Carbon-Steel Concrete Anchor Kit, which works with all 2- and 4-post racks and all enclosures, is designed to secure your network rack.
Features:
The Belkin RK5042 is a set of 4 heavy-duty casters for use with the Belkin RK1004 Enclosure.
Features:
Belkin Rack Enclosures | Height | Depth* | Rails | Width* |
Belkin RK1003 | 12U | 25 | 19" EIA | 21 |
Belkin Wall Mount Open Frame Racks |
Belkin Wall Mount Open Frame Racks | Height | Depth* | Rails |
Belkin F4D144 | 24" | 12" | 19" EIA |
Belkin F4D147 | 36" | 18" | 19" EIA |
Belkin F4D148 | 48" | 18" | 19" EIA |
Blanking panels (also known as filler panels or rack spacer blanks) are installed in server racks to maintain proper airflow. Using a rack without blanking panels results in improper cooling which can lead to thermal damage. If any of the vertical space in a server cabinet remains open, the gaps between rack mount equipment causes a change in airflow through the rack and across the components. Blanking panels are available in many sizes from 1U to 6U. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Great Lakes Blanking Panels | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
APC Blanking Panels | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Eaton Tool-less Blanking Panels | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Liebert Tool-less Blanking Panels | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Our premium quality Sun server compatible Server Rack comes fully configured with Sun mounting rails, Front & Rear Perforated Doors, Solid Side Panels, a Top Panel with Cut-outs for cable runs, and Levelers.
Sun Server Rack Mount Cabinet FeaturesSun Server Rack Mount Cabinet Specifications
Included with the Sun Server Rack Mount Cabinet:
Are you over over paying for 15 amp cords - most devices requiring C14 to C13 power cords draw less than 10 amps. A 10amp cable is rated to support 1100 watt server at 110volts & well over 1500 watts (2200 watts) at 220 volts. Consult your owner’s manual specifications to confirm a 10 amp cord is more than sufficient and save!
For colored power cords other than black, find your length below and click on the image to choose your color.
]]>Chatsworth 10822-012:
Chatsworth 10822-018:
Chatsworth 10822-109:
Chatsworth 10822-112:
Chatsworth 10822-118:
Chatsworth 10822-209:
Chatsworth 10822-212:
Chatsworth 10822-218:
Chatsworth 10822-709:
Chatsworth 10822-712:
Chatsworth 10822-718:
Chatsworth 10822-E09:
Chatsworth 10822-E12:
Chatsworth 10822-E18:
Universal Cable Runway
Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lb/ft (59.9 kg).
Part Number & Color | Width | Length | |||
Gray | Beige | Black | White | ||
Quick Ship Kit - UPS Shipping | |||||
12170-106 | 12170-206 | 12170-706 | 12170-E06 | 6" | 2 x 4' 6" |
12170-109 | 12170-209 | 12170-709 | 12170-E09 | 10" | 2 x 4' 6" |
12170-112 | 12170-212 | 12170-712 | 12170-E12 | 12" | 2 x 4' 6" |
Standard Lead - Freight | |||||
10250-104 | 10250-204 | 10250-704 | 10250-E04 | 4" | 9' 11.5" |
10250-106 | 10250-206 | 10250-706 | 10250-E06 | 6" | 9' 11.5" |
10250-109 | 10250-209 | 10250-709 | 10250-E09 | 9" | 9' 11.5" |
10250-112 | 10250-212 | 10250-712 | 10250-E12 | 12" | 9' 11.5" |
10250-115 | 10250-215 | 10250-715 | 10250-E15 | 15" | 9' 11.5" |
10250-118 | 10250-218 | 10250-718 | 10250-E18 | 18" | 9' 11.5" |
10250-124 | 10250-224 | 10250-724 | 10250-E24 | 24" | 9' 11.5" |
10250-131 | 10250-231 | 10250-731 | 10250-E31 | 30" | 9' 11.5" |
10250-137 | 10250-237 | 10250-737 | 10250-E37 | 36" | 9' 11.5" |
Ladder Cable Retaining Post
Provides extra cable depth to existing 1-1/2” cable runway installation. Mounts onto Cable Runway side stringers. Post are 1/2” x 1” x .065” wall rectangular steel tubing; bracket is 1046 steel.
Part Number & Color | Post Height | ||||
Gold | Gray | Beige | Black | White | |
10596-006 | 10596-106 | 10596-206 | 10596-706 | 10596-E06 | 6" |
10596-008 | 10596-108 | 10596-208 | 10596-708 | 10596-E08 | 8" |
10596-010 | 10596-110 | 10596-210 | 10596-710 | 10596-E10 | 10" |
10596-056 | 10596-156 | 10596-256 | 10596-756 | 10596-E56 | 6", Pack of 50 |
10596-058 | 10596-158 | 10596-258 | 10596-758 | 10596-E58 | 8", Pack of 50 |
10596-050 | 10596-150 | 10596-250 | 10596-750 | 10596-E50 | 10", Pack of 50 |
Movable Ladder Cross Member
Permits the dropping of cables at any point between cross members of 9", 12" or 18"W Cable Runways. Combine with the recommended Cable Runway Radius Drop.
Part Number & Color | Ladder Width | |||
Gray | Beige | Black | White | |
12115-109 | 12115-209 | 12115-709 | 12115-E09 | 9" |
12115-112 | 12115-212 | 12115-712 | 12115-E12 | 12" |
12115-118 | 12115-218 | 12115-718 | 12115-E18 | 18" |
Ladder Cable Pathway Dividers
Pathway Dividers divide Cable Runway into multiple cable pathways in order to organize cables according to media type or destination. By organizing horizontal cables by destination according to route or zone, technicians can better manage cables when additional cables are added or when the cable path through the building changes due to building renovations.
Part Number & Color | Description | |
Black | White | |
13392-711 | 13392-E11 | Divider, Pack of 5 |
13392-712 | 13392-E12 | Divider, Pack of 25 |
Radius Drop - Cross Member
Mounts to the cross member of a CPI Cable Runway to help maintain proper Category 5e/6/6a or fiber bend radius.
Part Number & Color | Cable Spools | Ladder Width | |||
Gray | Beige | Black | White | ||
12100-106 | 12100-206 | 12100-706 | 12100-E06 | 2 ea. | 6" |
12100-109 | 12100-209 | 12100-709 | 12100-E09 | 2 ea. | 9" |
12100-112 | 12100-212 | 12100-712 | 12100-E12 | 3 ea. | 12" |
12100-118 | 12100-218 | 12100-718 | 12100-E18 | 3 ea. | 18" |
Radius Drop - Adjustable Stringer
Mounts to the side stringer of a CPI Cable Runway to help maintain proper Category 5e/6/6a or fiber bend radius.
Part Number & Color | Cable Spools | Product Width | |||
Gray | Beige | Black | White | ||
12101-111 | 12101-211 | 12101-711 | 12101-E11 | 2 ea. | 10.3" |
Cable Ladder Runway Tray
For use with Universal Cable Runways. Material is .032" thick sheet aluminum. Length is 9' 11-1/2".
Part Number & Color | Ladder Width | |||
Gray | Beige | Black | White | |
10606-106 | 10606-206 | 10606-706 | 10606-E06 | 6" |
10606-109 | 10606-209 | 10606-709 | 10606-E09 | 9" |
10606-112 | 10606-212 | 10606-712 | 10606-E12 | 12" |
10606-115 | 10606-215 | 10606-715 | 10606-E15 | 15" |
10606-118 | 10606-218 | 10606-718 | 10606-E18 | 18" |
10606-124 | 10606-224 | 10606-724 | 10606-E24 | 24" |
Protective Ladder End Caps
Covers and protects exposed ends of cable runway. Reduces chances of personal injury and equipment damage.
Part Number | Description |
10642-001 | Protective End Cap, Pair of 2 |
Ladder End Bar Kit
Used to close an unspliced end of Cable Runway. Made of 3/8" x 1-1/2" x .065" thick rectangular steel tubing.
Touch-Up Paint - Spray Can
Air dry lacquer for touching up finish. Matches color and gloss of CPI’s textured paint; air dries to hard finish in minutes.
Part Number & Color | Description | |||
Gray | Off-White / Beige | Black | White | |
25400-100 | 25400-200 | 25400-700 | 25400-E00 | 12 oz. (340g) Spray Can |
Touch-Up Paint - Bottle
Air dry waterborne paint for touching up finish. Matches color and gloss of CPI’s textured paint.
Part Number & Color | Description | |||
Gray | Off-White / Beige | Black | White | |
25401-100 | 25401-200 | 25401-700 | 25401-E00 | 1 oz. (30g) Bottle |
CAT6a Antibacterial/Antimicrobial Shielded Patch Cord Datasheet (PDF)
CAT6a Antibacterial/Antimicrobial Shielded Patch Cord Datasheet (PDF)
CAT6a Antibacterial/Antimicrobial Shielded Patch Cord Datasheet (PDF)
CAT6a Antibacterial/Antimicrobial Shielded Patch Cord Datasheet (PDF)
CAT6a Antibacterial/Antimicrobial Shielded Patch Cord Datasheet (PDF)
CAT6a Antibacterial/Antimicrobial Shielded Patch Cord Datasheet (PDF)
CAT6a Antibacterial/Antimicrobial Shielded Patch Cord Datasheet (PDF)
The 4UTELECOMRKIT is a rack mounting kit that contains two metal brackets that mount one 4U size Vertiv Liebert GXT4 UPS or Battery Cabinet into a 19 in. 2-post telecom/relay rack.
The 2UTELECOMRKIT is a rack mounting kit that contains two metal brackets that mount one 2U size Vertiv Liebert GXT2, GXT3, GXT4, or GXT5 UPS System or Battery Cabinet into a 19-In 2-post telecom/relay rack.
OVERVIEW | |
UPC Code | 037332226112 |
Product Type | Multi-Device Charger |
Charging Form Factor | Mobile Cart |
Functions | Charge; Secure |
Device Compatibility | Chromebook; Laptop |
Device Slots | 21 |
INPUT | |
Nominal Input Voltage(s) Supported | 120V AC |
Voltage Compatibility (VAC) | 120 |
Input Frequency | 60 Hz |
Input Plug Type | NEMA 5-15P |
Input Cord Length(ft) | 10 |
CHARGING | |
Number of Charging Ports | 21 |
Charging Method | AC |
Charging Port Type | NEMA 5-15R |
Charging Port Details | Pass through |
Charging Portts/Amps | (21) 12A |
Overcharge Protection | No |
PHYSICAL | |
Color | Black |
Material | Steel |
Shipping Dimensions(hwd/in.) | 46.85 x 26.77 x 29.13 |
Slot Dimensions-Bottom(hwd/in.) | 10.11 x 1.2 x 15.58 |
Slot Dimensions-Middle/Top(hwd/in.) | 10.13 x 1.2 x 15.58 |
Unit Dimensions (hwd / in) | 43.050 x 26.040 x 28.840 (with handle installed) |
Unit Weight (lbs) | 110.23 |
Number of Shelves | 3 |
FEATURES & SPECIFICATIONS | |
Cable Management | Yes |
EMI/RFI Line Noise Protection | No |
Locking | Yes |
Lock Type | Key |
Built-In Circuit Breaker | Yes |
Overcurrent Protection | Yes |
Flow-Through Ventilation | Yes |
UV Sterilization | No |
STANDARDS & COMPLIANCE | |
Certifications | UL 60950-1 (Power Component); CAN/CSA 22.2 No. 60950-1 (Power Component) |
Approvals | RoHS |
NOM (Mexico) | Tested to NOM (Mexico) |
OVERVIEW | |
UPC Code | 037332226105 |
Product Type | Multi-Device Charger |
Charging Form Factor | Mobile Cart |
Functions | Charge; Secure |
Device Compatibility | Chromebook; Laptop |
Device Slots | 27 |
INPUT | |
Nominal Input Voltage(s) Supported | 120V AC |
Voltage Compatibility (VAC) | 120 |
Input Frequency | 60 Hz |
Input Plug Type | NEMA 5-15P |
Input Cord Length(ft) | 10 |
CHARGING | |
Number of Charging Ports | 27 |
Charging Method | AC |
Charging Port Type | NEMA 5-15R |
Charging Port Details | Pass through |
Charging Portts/Amps | (27) 12A |
Overcharge Protection | No |
PHYSICAL | |
Color | Black |
Material | Steel |
Shipping Dimensions(hwd/in.) | 46.85 x 26.77 x 29.13 |
Slot Dimensions-Bottom(hwd/in.) | 10.11 x 1.2 x 15.58 |
Slot Dimensions-Middle/Top(hwd/in.) | 10.13 x 1.2 x 15.58 |
Unit Dimensions (hwd / in) | 43.050 x 26.040 x 28.840 (with handle installed) |
Unit Weight (lbs) | 110.23 |
Number of Shelves | 3 |
FEATURES & SPECIFICATIONS | |
Cable Management | Yes |
EMI/RFI Line Noise Protection | No |
Locking | Yes |
Lock Type | Key |
Built-In Circuit Breaker | Yes |
Overcurrent Protection | Yes |
Flow-Through Ventilation | Yes |
UV Sterilization | No |
STANDARDS & COMPLIANCE | |
Certifications | UL 60950-1 (Power Component); CAN/CSA 22.2 No. 60950-1 (Power Component) |
Approvals | RoHS |
NOM (Mexico) | Tested to NOM (Mexico) |
OVERVIEW | |
UPC Code | 037332191809 |
Product Type | Multi-Device Charger |
Charging Form Factor | Mobile Cart |
Functions | Charge; Secure |
Device Compatibility | Chromebook; Laptop |
Device Slots | 32 |
INPUT | |
Nominal Input Voltage(s) Supported | 120V AC |
Voltage Compatibility (VAC) | 120 |
Input Frequency | 50 / 60 Hz |
Input Plug Type | NEMA 5-15P |
Input Cord Length(ft) | 10 |
CHARGING | |
Number of Charging Ports | 32 |
Charging Method | AC |
Charging Port Type | NEMA 5-15R |
Charging Port Details | Pass through |
Charging Portts/Amps | (32) 12A |
Overcharge Protection | No |
PHYSICAL | |
Color | Black |
Material | Steel |
Shipping Dimensions(hwd/in.) | 45.08 x 22.83 x 33.66 |
Shipping Weight(lbs.) | 166 |
Slot Dimensions-Bottom(hwd/in.) | 10.5 x 1.5 x 15.4 |
Unit Dimensions (hwd / in) | 42.3 x 34.8 x 21.6 (with handle installed) |
Unit Weight (lbs) | 130.67 |
Number of Shelves | 2 |
FEATURES & SPECIFICATIONS | |
Cable Management | Yes |
EMI/RFI Line Noise Protection | No |
Locking | Yes |
Lock Type | Key |
Built-In Circuit Breaker | Yes |
Overcurrent Protection | Yes |
Flow-Through Ventilation | Yes |
UV Sterilization | No |
STANDARDS & COMPLIANCE | |
Certifications | Tested to EIA-310-E, FCC & IEC Class B, UL 1363 (Power Component) |
Approvals | RoHS |
NOM (Mexico) | Tested to NOM (Mexico) |
OVERVIEW | |
UPC Code | 037332200488 |
Product Type | Multi-Device Charger |
Charging Form Factor | Mobile Cart |
Functions | Charge; Secure |
Device Compatibility | Chromebook; Laptop |
Device Slots | 36 |
INPUT | |
Nominal Input Voltage(s) Supported | 120V AC |
Voltage Compatibility (VAC) | 120 |
Input Frequency | 60 Hz |
Input Plug Type | NEMA 5-15P |
Input Cord Length(ft) | 10 |
CHARGING | |
Number of Charging Ports | 36 |
Charging Method | AC |
Charging Port Type | NEMA 5-15R |
Charging Port Details | Pass through |
Charging Portts/Amps | (36) 12A |
Overcharge Protection | No |
PHYSICAL | |
Color | Black |
Material | Steel |
Shipping Dimensions(hwd/in.) | 46.85 x 26.77 x 29.13 |
Shipping Weight(lbs) | 188.00 |
Slot Dimensions-Bottom(hwd/in.) | 10.11 x 1.5 x 15.58 |
Slot Dimensions-Middle/Top(hwd/in.) | 10.13 x 1.5 x 15.58 |
Unit Dimensions (hwd / in) | 36.1 x 34.8 x 21.6 (with handle installed) |
Unit Weight (lbs) | 110.23 |
Number of Shelves | 3 |
FEATURES & SPECIFICATIONS | |
Cable Management | Yes |
EMI/RFI Line Noise Protection | No |
Locking | Yes |
Lock Type | Key |
Built-In Circuit Breaker | Yes |
Overcurrent Protection | Yes |
Flow-Through Ventilation | Yes |
UV Sterilization | No |
STANDARDS & COMPLIANCE | |
Certifications | UL 60950-1 (Power Component); CAN/CSA 22.2 No. 60950-1 (Power Component) |
Approvals | RoHS |
NOM (Mexico) | Tested to NOM (Mexico) |
OVERVIEW | |
UPC Code | 037332240149 |
Product Type | Multi-Device Charger |
Charging Form Factor | Mobile Cart |
Functions | Charge; Secure |
Device Compatibility | Charge; Secure; Sync; Sanitize |
Device Slots | 32 |
INPUT | |
Nominal Input Voltage(s) Supported | 120V AC |
Voltage Compatibility (VAC) | 120 |
Input Frequency | 50 / 60 Hz (auto-select) |
Input Plug Type | NEMA 5-15P |
Input Cord Length(ft) | 10 |
CHARGING | |
Number of Charging Ports | 32 |
Charging Method | AC |
Charging Port Type | NEMA 5-15R |
Charging Port Details | Pass through |
Charging Portts/Amps | (32) 12A |
Overcharge Protection | No |
PHYSICAL | |
Color | White |
Material | Steel |
Antimicrobial | Yes |
Shipping Dimensions(hwd/in.) | 45.08 x 22.83 x 33.66 |
Slot Dimensions(hwd/in.) | 10.5 x 1.5 x 15.4 |
Unit Dimensions (hwd / in) | 42.3 x 34.8 x 21.6 (with handle installed) |
Unit Weight (lbs) | 130.67 |
Number of Shelves | 2 |
FEATURES & SPECIFICATIONS | |
Cable Management | Yes |
EMI/RFI Line Noise Protection | No |
Locking | Yes |
Lock Type | Key; Padlock (User Supplied) |
Built-In Circuit Breaker | Yes |
Overcurrent Protection | Yes |
Flow-Through Ventilation | Yes |
UV Sterilization | Yes |
STANDARDS & COMPLIANCE | |
Certifications | Tested to EIA-310-E, FCC & IEC Class B, UL 1363 (Power Component) |
Approvals | RoHS |
NOM (Mexico) | Tested to NOM (Mexico) |
OVERVIEW | |
UPC Code | 037332226082 |
Product Type | Multi-Device Charger |
Charging Form Factor | Mobile Cart |
Functions | Charge; Secure |
Device Compatibility | Chromebooks; Laptops |
Device Slots | 45 |
INPUT | |
Nominal Input Voltage(s) Supported | 120V AC |
Voltage Compatibility (VAC) | 120 |
Input Frequency | 60 Hz |
Input Plug Type | NEMA 5-15P |
Input Cord Length(ft) | 10 |
CHARGING | |
Number of Charging Ports | 45 |
Charging Method | AC |
Charging Port Type | NEMA 5-15R |
Charging Port Details | Pass through |
Charging Portts/Amps | (45) 12A |
Overcharge Protection | No |
PHYSICAL | |
Color | Black |
Material | Steel |
Shipping Dimensions(hwd/in.) | 46.85 x 26.77 x 29.13 |
Slot Dimensions-Bottom(hwd/in.) | 10.11 x 1.14 x 15.58 |
Slot Dimensions-Top/Middle(hwd/in.) | 10.13 x 1.14 x 15.58 |
Unit Dimensions (hwd / in) | 43.050 x 26.040 x 28.840 (with handle installed) |
Unit Weight (lbs) | 110.23 |
Number of Shelves | 3 |
FEATURES & SPECIFICATIONS | |
Cable Management | Yes |
EMI/RFI Line Noise Protection | No |
Locking | Yes |
Lock Type | Key |
Built-In Circuit Breaker | Yes |
Overcurrent Protection | Yes |
Flow-Through Ventilation | Yes |
UV Sterilization | No |
STANDARDS & COMPLIANCE | |
Certifications | UL 60950-1 (Power Component); CAN/CSA 22.2 No. 60950-1 (Power Component) |
Approvals | RoHS |
NOM (Mexico) | Tested to NOM (Mexico) |
OVERVIEW | |
UPC Code | 037332226075 |
Product Type | Multi-Device Charger |
Charging Form Factor | Mobile Cart |
Functions | Charge; Secure |
Device Compatibility | Chromebook; Laptop |
Device Slots | 48 |
INPUT | |
Nominal Input Voltage(s) Supported | 120V AC |
Voltage Compatibility (VAC) | 120 |
Input Frequency | 60 Hz |
Input Plug Type | NEMA 5-15P |
Input Cord Length(ft) | 10 |
CHARGING | |
Number of Charging Ports | 48 |
Charging Method | AC |
Charging Port Type | NEMA 5-15R |
Charging Port Details | Pass through |
Charging Portts/Amps | (48) 12A |
Overcharge Protection | No |
PHYSICAL | |
Color | Black |
Material | Steel |
Shipping Dimensions(hwd/in.) | 46.85 x 26.77 x 29.13 |
Slot Dimensions-Bottom(hwd/in.) | 10.11 x 1.05 x 15.58 |
Slot Dimensions-Middle/Top(hwd/in.) | 10.13 x 1.05 x 15.58 |
Unit Dimensions (hwd / in) | 43.050 x 26.040 x 28.840 (with handle installed) |
Unit Weight (lbs) | 110.23 |
Number of Shelves | 3 |
FEATURES & SPECIFICATIONS | |
Cable Management | Yes |
EMI/RFI Line Noise Protection | No |
Locking | Yes |
Lock Type | Key |
Built-In Circuit Breaker | Yes |
Overcurrent Protection | Yes |
Flow-Through Ventilation | Yes |
UV Sterilization | No |
STANDARDS & COMPLIANCE | |
Certifications | UL 60950-1 (Power Component); CAN/CSA 22.2 No. 60950-1 (Power Component) |
Approvals | RoHS |
NOM (Mexico) | Tested to NOM (Mexico) |
Ordering this item will not result in a sale.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its length. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>*NOTE: This product must be shipped via Freight due to its lenght. Please contact us or call a sales representative at 866-722-5776 to order this product.
]]>Chatsworth 10596-006:
Chatsworth 10596-008:
Chatsworth 10596-010:
Chatsworth 10596-050:
Chatsworth 10596-056:
Chatsworth 10596-058:
Chatsworth 10596-106:
Chatsworth 10596-108:
Chatsworth 10596-110:
Chatsworth 10596-150:
Chatsworth 10596-156:
Chatsworth 10596-158:
Chatsworth 10596-206:
Chatsworth 10596-208:
Chatsworth 10596-210:
Chatsworth 10596-250:
Chatsworth 10596-256:
Chatsworth 10596-258:
Chatsworth 10596-706:
Chatsworth 10596-708:
Chatsworth 10596-710:
Chatsworth 10596-750:
Chatsworth 10596-756:
Chatsworth 10596-758:
Chatsworth 10596-E06:
Chatsworth 10596-E08:
Chatsworth 10596-E10:
Chatsworth 10596-E50:
Chatsworth 10596-E56:
Chatsworth 10596-E58:
Chatsworth 10606-718 is a Cable Ladder Runway Tray (Black) for use with 18"W Universal Cable Runways. Material is .032" thick sheet aluminum. Length is 9' 11-1/2".
]]>Chatsworth 10723-012:
Chatsworth 10723-024:
Chatsworth 10723-106:
Chatsworth 10723-109:
Chatsworth 10723-112:
Chatsworth 10723-115:
Chatsworth 10723-118:
Chatsworth 10723-120:
Chatsworth 10723-124:
Chatsworth 10723-206:
Chatsworth 10723-209:
Chatsworth 10723-212:
Chatsworth 10723-215:
Chatsworth 10723-218:
Chatsworth 10723-220:
Chatsworth 10723-224:
Chatsworth 10723-706:
Chatsworth 10723-709:
Chatsworth 10723-712:
Chatsworth 10723-715:
Chatsworth 10723-718:
Chatsworth 10723-720:
Chatsworth 10723-724:
Chatsworth 10723-E06:
Chatsworth 10723-E09:
Chatsworth 10723-E12:
Chatsworth 10723-E15:
Chatsworth 10723-E18:
Chatsworth 10723-E20:
Chatsworth 10723-E24:
Chatsworth 10724-006:
Chatsworth 10724-009:
Chatsworth 10724-012:
Chatsworth 10724-015:
Chatsworth 10724-018:
Chatsworth 10724-020:
Chatsworth 10724-024:
Chatsworth 10724-106:
Chatsworth 10724-109:
Chatsworth 10724-112:
Chatsworth 10724-115:
Chatsworth 10724-118:
Chatsworth 10724-120:
Chatsworth 10724-124:
Chatsworth 10724-206:
Chatsworth 10724-209:
Chatsworth 10724-212:
Chatsworth 10724-215:
Chatsworth 10724-218:
Chatsworth 10724-220:
Chatsworth 10724-224:
Chatsworth 10724-706:
Chatsworth 10724-709:
Chatsworth 10724-712:
Chatsworth 10724-715:
Chatsworth 10724-718:
Chatsworth 10724-720:
Chatsworth 10724-724:
Chatsworth 10724-E06:
Chatsworth 10724-E09:
Chatsworth 10724-E12:
Chatsworth 10724-E15:
Chatsworth 10724-E18:
Chatsworth 10724-E20:
Chatsworth 10724-E24:
The cabinet system is certified to an 800 lb equipment load in a seismic environment. The Seismic Frame Cabinet has built-in cable management via an aluminum top panel with four edge protected punch-out ports. Three inches of space between the side panel and interior cabinet houses two vertical cabling ring sections which accommodate interior cable management. In data centers using raised floor cable routing, the Seismic Frame's open base easily addresses the maintenance of cables for entry and exit while providing optimal top to bottom ventilation for the interior cabinet. For maximum thermal management, the cabinet features a vented plexiglass front door and a perforated metal rear door. Ships fully assembled.
Note: The Seismic Frame Cabinet System can accommodate up to four vertical cabling ring sections if requirements necessitate extensive cable management.
Seismic Frame Cabinet Includes:
Cabinet & Frame Specifications:
The cabinet system is certified to an 800 lb equipment load in a seismic environment. The Seismic Frame Cabinet has built-in cable management via an aluminum top panel with four edge protected punch-out ports. Three inches of space between the side panel and interior cabinet houses two vertical cabling ring sections which accommodate interior cable management. In data centers using raised floor cable routing, the Seismic Frame's open base easily addresses the maintenance of cables for entry and exit while providing optimal top to bottom ventilation for the interior cabinet. For maximum thermal management, the cabinet features a vented plexiglass front door and a perforated metal rear door. Ships fully assembled.
Note: The Seismic Frame Cabinet System can accommodate up to four vertical cabling ring sections if requirements necessitate extensive cable management.
]]>
Seismic Frame Cabinet Includes:
Cabinet & Frame Specifications:
The cabinet system is certified to an 800 lb equipment load in a seismic environment. The Seismic Frame Cabinet has built-in cable management via an aluminum top panel with four edge protected punch-out ports. Three inches of space between the side panel and interior cabinet houses two vertical cabling ring sections which accommodate interior cable management. In data centers using raised floor cable routing, the Seismic Frame's open base easily addresses the maintenance of cables for entry and exit while providing optimal top to bottom ventilation for the interior cabinet. For maximum thermal management, the cabinet features a vented plexiglass front door and a perforated metal rear door. Ships fully assembled.
Note: The Seismic Frame Cabinet System can accommodate up to four vertical cabling ring sections if requirements necessitate extensive cable management.
Seismic Frame Cabinet Includes:
Cabinet & Frame Specifications:
Chatsworth 12100-106:
Chatsworth 12100-109:
Chatsworth 12100-112:
Chatsworth 12100-118:
Chatsworth 12100-206:
Chatsworth 12100-209:
Chatsworth 12100-212:
Chatsworth 12100-218:
Chatsworth 12100-706:
Chatsworth 12100-709:
Chatsworth 12100-712:
Chatsworth 12100-718:
Chatsworth 12100-E06:
Chatsworth 12100-E09:
Chatsworth 12100-E12:
Chatsworth 12100-E18:
Chatsworth 12101-111:
Chatsworth 12101-211:
Chatsworth 12101-711:
Chatsworth 12101-E11:
Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry-standard features you have come to expect. With the runway supported every 5' (1.5 m), maximum load with minimal deflection is 132 lbs per ft (59.9 kg).
Note, this is a Quick Ship product designed to meet UPS requirements without additional charges. Packaged one kit per box.
]]>Color: Black
Chatsworth Relay Rack Bracing Kit Diagram
Chatsworth 12495-719 Features: Fits 19" wide 4 post cabinets, Made of strong light weight aluminum, Shelf supports up to 200lbs., Keyboard tray fits up to 19.25"W x 8"D keyboards, Keyboard tray and mouse pad shelf store inside monitor shelf, Mouse pad is 7"W x 7"D, Requires only 2U of rackmount space.
]]>
Chatsworth 12796-501 45 degree Mounting Bracket attaches to the interior rear panel of a Cube-IT Plus rack for mounting additional equipment such as patch panels, cable managers and power strips.
Chatsworth 13286-501 is a pair of Vertical Mounting Brackets for creating an extra 2U of vertical rack-mount space within a rack. The vertical equipment brackets mount equipment on rack rails in a vertical orientation. The maximum load per pair of brackets is 75 pounds.
Chatsworth 13286-502 is a pair of Vertical Mounting Brackets for creating an extra 3U of vertical rack-mount space within a rack. The vertical equipment brackets mount equipment on rack rails in a vertical orientation. The maximum load per pair of brackets is 75 pounds.
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
The Fan Top Panel Kit is used to replace the standard top panel and provides additional exhaust airflow through the top of the cabinet. Two fan housings are mounted on the bottom of the panel. Each fan housing has two 4.5" (114 mm) diameter fans capable of 100 CFM (170 CMH) each and an IEC C14 connector.
The kit includes a detachable 15'L (5 m) power cord with dual C13 connectors for the fan housings and a molded NEMA 5-15P plug (115 VAC) or C14 (230 VAC) connector. Order two C13 power cords separately if different power connections are required. Select to match local voltage and the width and depth of the cabinet.]]>
Finish: Zinc
Kit of four 3/8" thread components:
Standard Rack Kit consists of:
Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Specifications
The rack is delivered unassembled in a compact carton. The Universal Rack is easy to assemble and components bolt together with included hardware, assembly takes approximately 10 minutes. Assembly holes in the rack uprights are threaded and the Two-post rack must be secured to the building structure. However, the pre-punched base angles make it easy to attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
Ships in standard BLACK - Also available in gray, computer beige or glacier white. For these color options please call 1-866-722-5776.
]]>Key Features and Benefits
For decades, the Chatsworth Standard 2-Post Relay Rack have set industry standards. Priced competitively, the Standard Equipment Rack represents the best value in racks today.
For decades, the Chatsworth Standard 2-Post Relay Rack have set industry standards. Priced competitively, the Standard Equipment Rack represents the best value in racks today.
For decades, the Chatsworth Standard 2-Post Relay Rack have set industry standards. Priced competitively, the Standard Equipment Rack represents the best value in racks today.
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11840-224:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11840-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11840-248:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11840-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11840-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11840-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11890-224:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11890-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11890-248:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11890-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11890-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11890-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11900-224:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11900-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11900-248:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11900-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11900-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11900-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11901-224:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11901-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11901-248:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11901-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11901-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11901-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>The newly enhanced CUBE-iT PLUS Wall-mount Cabinet has been redesigned to deliver exceptional strength and rigidity in a swing-out wall-mount enclosure system. The new rear panel and hinge design contribute to an impressive 200 lb load rating. The patent-pending hinges facilitate quick and easy installation. Either left- or right-handed installations are possible with the same cabinet.
Chatsworth CPI 11996-224:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11996-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11996-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11996-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11996-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 11996-E48:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 12419-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Solid Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 12419-248:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 12419-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 12419-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Solid Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 12419-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
This is the replacement for the CPI: 12419-224 CUBE-iT Wallmount Cabinet.
]]>White, Front Door - Solid Tempered Glass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 12419-E24:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13265-224:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13265-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13265-248:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13265-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13265-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13265-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13275-224:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13275-236:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13275-248:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13275-724:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Requires 7-10 business day lead time.
Chatsworth CPI 13275-736:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Wallmount Cabinet Key Features:
Depths for Wall-Mounted Cabinets in (mm) | ||||
Cabinet Depth | 13 (330) | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 11.8 (300) | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13275-748:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13491-260:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13491-272:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13491-760:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13491-772:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13492-260:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13492-272:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13492-760:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13492-772:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13493-260:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13493-272:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13493-760:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Metal Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13493-772:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13494-260:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13494-272:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13494-760:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13494-772:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13495-260:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13495-272:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13495-760:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13495-772:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13496-260:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
White, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13496-272:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13496-760:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
CUBE-iT Swing-out Cabinet Key Features:
Depths for Cube-iT 33U & 40U Cabinets In (mm) | |||
Cabinet Depth | 18 (460) | 24 (610) | 30 (760) |
Maximum Usable Depth | 16.8 (427) | 22.8 (579) | 28.8 (732) |
Black, Front Door - Plexiglass Door, Rear Door - Wall Mount Panel, Top Panel - Solid, Sides - Yes
]]>Chatsworth CPI 13496-772:
Download the
CUBE-iT Product Datasheet (PDF)
CUBE-iT FAQ (PDF)
12U - Swing-out Wallmount Cabinets | ||||
Part Number & Color | Door Style | Depth | Width | |
White | Black | |||
13265-224 | 13265-724 | Solid | 13" | 24" |
13275-224 | 13275-724 | Plexi | 13" | 24" |
11890-224 | 11890-724 | Solid | 18" | 24" |
11901-224 | 11901-724 | Plexi | 18" | 24" |
11840-224 | 11840-724 | Solid | 24" | 24" |
11900-224 | 11900-724 | Plexi | 24" | 24" |
11996-224 | 11996-724 | Solid | 30" | 24" |
12419-224 | 12419-724 | Plexi | 30" | 24" |
18U - Swing-out Wallmount Cabinets | ||||
Part Number & Color | Door Style | Depth | Width | |
White | Black | |||
13265-236 | 13265-736 | Solid | 13" | 24" |
13275-236 | 13275-736 | Plexi | 13" | 24" |
11890-236 | 11890-736 | Solid | 18" | 24" |
11901-236 | 11901-736 | Plexi | 18" | 24" |
11840-236 | 11840-736 | Solid | 24" | 24" |
11900-236 | 11900-736 | Plexi | 24" | 24" |
11996-236 | 11996-736 | Solid | 30" | 24" |
12419-236 | 12419-736 | Plexi | 30" | 24" |
26U - Swing-out Wallmount Cabinets | ||||
Part Number & Color | Door Style | Depth | Width | |
White | Black | |||
13265-248 | 13265-748 | Solid | 13" | 24" |
13275-248 | 13275-748 | Plexi | 13" | 24" |
11890-248 | 11890-748 | Solid | 18" | 24" |
11901-248 | 11901-748 | Plexi | 18" | 24" |
11840-248 | 11840-748 | Solid | 24" | 24" |
11900-248 | 11900-748 | Plexi | 24" | 24" |
11996-248 | 11996-748 | Solid | 30" | 24" |
12419-248 | 12419-748 | Plexi | 30" | 24" |
Chatsworth 33U & 40U Swing-out Racks |
33U - Swing-out Floor-supported Cabinets | ||||
Part Number & Color | Door Style | Depth | Width | |
White | Black | |||
13491-260 | 13491-760 | Solid | 18" | 27.3" |
13494-260 | 13494-760 | Plexi | 18" | 27.3" |
13492-260 | 13492-760 | Solid | 24" | 27.3" |
13495-260 | 13495-760 | Plexi | 24" | 27.3" |
13493-260 | 13493-760 | Solid | 30" | 27.3" |
13496-260 | 13496-760 | Plexi | 30" | 27.3" |
40U - Swing-out Floor-supported Cabinets | ||||
Part Number & Color | Door Style | Depth | Width | |
White | Black | |||
13491-272 | 13491-772 | Solid | 18" | 27.3" |
13494-272 | 13494-772 | Plexi | 18" | 27.3" |
13492-272 | 13492-772 | Solid | 24" | 27.3" |
13495-272 | 13495-772 | Plexi | 24" | 27.3" |
13493-272 | 13493-772 | Solid | 30" | 27.3" |
13496-272 | 13496-772 | Plexi | 30" | 27.3" |
Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A300-EB Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 42.3 in. (1074 mm.) |
Frame Depth, At Base, No Doors2 | 41.3 in. (1050 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 36.6 in. (929 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A320 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 42.3 in. (1074 mm.) |
Frame Depth, At Base, No Doors2 | 41.3 in. (1050 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 36.6 in. (929 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A400 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 48.4 in. (1229 mm.) |
Frame Depth, At Base, No Doors2 | 47.2 in. (1200 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 42.5 in. (1079 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A401 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 48.4 in. (1229 mm.) |
Frame Depth, At Base, No Doors2 | 47.2 in. (1200 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 42.5 in. (1079 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A402 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 48.4 in. (1229 mm.) |
Frame Depth, At Base, No Doors2 | 47.2 in. (1200 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 42.5 in. (1079 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A420 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 48.4 in. (1229 mm.) |
Frame Depth, At Base, No Doors2 | 47.2 in. (1200 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 36.6 in. (929 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A421 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 48.4 in. (1229 mm.) |
Frame Depth, At Base, No Doors2 | 47.2 in. (1200 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 36.6 in. (929 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1A421 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 23.6 in. (600 mm.) |
Frame Opening, Front | 20.0 in. (508 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 48.4 in. (1229 mm.) |
Frame Depth, At Base, No Doors2 | 47.2 in. (1200 mm.) |
Min./Max. Rail Depth3 | 7.2 in. (183 mm.) / 36.6 in. (929 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1B300 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 29.5 in. (750 mm.) |
Frame Opening, Front | 25.9 in. (658 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 42.3 in. (1074 mm.) |
Frame Depth, At Base, No Doors2 | 41.3 in. (1050 mm.) |
Min./Max. Rail Depth3 | 6.8 (173) / 42.0 (1068) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Features:
Doors/Latches:
Side Panels:
Top Panel:
Equipment Support:
Grounding/Bonding:
PDU Brackets:
Chatsworth GF-1B320 Specifications:
Height | |
Overall Height (on casters) | 79.3 in. (2013 mm.) |
Frame Opening, Front | 73.9 in. (1876 mm.) |
Nominal Width | |
Overall Width | 29.56 in. (750 mm.) |
Frame Opening, Front | 25.9 in. (658 mm.) |
Panel Width | 19” EIA (482.6 mm) |
Nominal Depth | |
Overall Depth with Doors1 | 42.3 in. (1074 mm.) |
Frame Depth, At Base, No Doors2 | 41.3 in. (1050 mm.) |
Min./Max. Rail Depth3 | 6.8 in. (173 mm.) / 42.0 in. (1068 mm.) |
Load Capacity | |
Static Load | 3000 lb. (1360 kg.) |
"Rolling" Load on Casters | 2250 lb. (1020 kg.) |
Material | Steel |
Construction | Welded/bolted frame, mounting rails bolt to frame |
Finish | Epoxy-polyester hybrid powder coat in black |
Certifications | UL Listed 60950, NWIN, File #E227626 |
Dimension Notes:
1. Doors add approximately 1.0” (25 mm) to the frame depth of the cabinet. The front door is 2.2”D (56 mm) and adds approximately 1” (25 mm) to the frame depth. The rear door is approximately 1.0”D (25 mm) and does not add to the frame depth. See note 2.
2. Depth at the base of the cabinet frame is 2.5” (64 mm) more than depth at the frame uprights. There is a 1.25” (32 mm) threshold on the front and rear of the cabinet that provides easy access to leveling feet. When installed, the front and rear doors cover this threshold. Frame uprights (corner posts) are approximately 2.9” (74 mm) deep.
3. When adjusted to maximum depth, mounting rails wrap around the frame uprights (corner posts). Note: Cable Ring Kits cannot be attached to the rails when they are set to maximum depth.
Includes:
NOTE: This GlobalFrame server cabinet has a standard lead time of 2 to 3 weeks.
Click here or scroll to the bottom of this page to view the features and specifications for this Server Rack
]]>Chatsworth's GF-Series GlobalFrame™ Cabinet System is an easy-to-use, cost effective, computer and network equipment storage cabinet that complies with data center, computer room and premise network equipment room requirements. Several popular frame sizes are available now in stock for quick shipment. High load ratings and a wide variety of accessories ensure a complete solution for your application.
Chatsworth Global Frame Features:
For a larger selection of sizes as well as additional accessories, including vertical exhaust duct chimneys, cable management, filler panels and seal kits, or power strips that are not part of the quick ship program, please give us a call at 866-722-5776.
]]>E-Series ISP Co-Location Cabinet – for environments that need separate, secure equipment compartments for multiple users
| Seismic Frame® Cabinet – meeting Zone 4 seismic requirements
|
Contact us to configure a Chatsworth MegaFrame server cabinet for you today!
]]>Chatsworth offers an Optional Support Arm (12759-701). This support arm provides an additional set of arms that can be used to secure the top of the front panel on larger servers.
]]>
The Chatsworth Seismic Frame Two-Post Rack Concrete Floor Anchor Kit attaches the Seismic Frame Two-Post rack to a concrete slab floor.
Features:
Contact us to configure a Chatsworth T-Series server cabinet for you today!
Chatsworth T-Series Features:
The F-Series TeraFrame Cabinet System features an infinite number of configurations, exceptional thermal and cable management, UL Listed. You can select from up to 612 sizes to create a custom cabinet that arrives quickly to meet your busy schedule.
Features:
The N-Series TeraFrame Network Cabinets allow you to manage side-to-side airflow in a hot aisle/cold aisle data center environment - Cisco and Juniper compatible.
Features:]]>
External Dimensions: | 23" W x 83" H x 30" D |
Internal Compartment Dimensions: | 19" W x 36" H x 28.25" D |
Number of Compartments: | 2 |
Rack Units in Each Compartment: | 21U |
Our 2-Compartment Colo Rack Cabinets, come standard with (2) Independent Plexi Front Doors and (2) Independent Rear Doors with 235 CFM Fans each front & rear pair with uniquely keyed locks, solid non-removable Top Panel with Cable Access hole, (2) pair of EIA 10-32 Tapped Mounting Rails per compartment, solid Side Panels, and Secure Cable Access between compartments. Each compartment is configured to be compatible with most network equipment. For some servers you may need to consider our Universal Mounting Rail Options.
]]>External Dimensions: | 23" W x 83" H x 32" D |
Internal Compartment Dimensions: | 19" W x 36" H x 30.25" D |
Number of Compartments: | 2 |
Rack Units in Each Compartment: | 21U |
Our 2-Compartment Colo Rack Cabinets, come standard with (2) Independent Plexi Front Doors and (2) Independent Rear Doors with 235 CFM Fans each front & rear pair with uniquely keyed locks, solid non-removable Top Panel with Cable Access hole, (2) pair of EIA 10-32 Tapped Mounting Rails per compartment, solid Side Panels, and Secure Cable Access between compartments. Each compartment is configured to be compatible with most network equipment. For some servers you may need to consider our Universal Mounting Rail Options.
]]>External Dimensions: | 23" W x 83" H x 36" D |
Internal Compartment Dimensions: | 19" W x 36" H x 34.25" D |
Number of Compartments: | 2 |
Rack Units in Each Compartment: | 21u |
Our 2-Compartment Colo Rack Cabinets, come standard with (2) Independent Plexi Front Doors and (2) Independent Rear Doors with 235 CFM Fans each front & rear pair with uniquely keyed locks, solid non-removable Top Panel with Cable Access hole, (2) pair of EIA 10-32 Tapped Mounting Rails per compartment, solid Side Panels, and Secure Cable Access between compartments. Each compartment is configured to be compatible with most network equipment. For some servers you may need to consider our Universal Mounting Rail Options.
]]>External Dimensions: | 23" W x 83" H x 40" D |
Internal Compartment Dimensions: | 19" W x 36" H x 38.25" D |
Number of Compartments: | 2 |
Rack Units in Each Compartment: | 21U |
Our 2-Compartment Colo Rack Cabinets, come standard with (2) Independent Plexi Front Doors and (2) Independent Rear Doors with 235 CFM Fans each front & rear pair with uniquely keyed locks, solid non-removable Top Panel with Cable Access hole, (2) pair of EIA 10-32 Tapped Mounting Rails per compartment, solid Side Panels, and Secure Cable Access between compartments. Each compartment is configured to be compatible with most network equipment. For some servers you may need to consider our Universal Mounting Rail Options.
]]>These Colo Rack Mount Cabinets, are compatible with most computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
Colo Rack Mount Cabinet Features
All Colo Rack Mount Cabinets feature a flexible modular concept with either 2, 3 or 4 compartment server cabinets. Other features include: Cable access provisions located on top and bottom, Grounding studs on doors, side panels, and base unit, Perimeter vented plexi front door and solid rear door with built in exhaust fan or Mesh front and rear doors.
Colo Rack Mount Cabinet Dimensions
All of the following server cabinets are 19" EIA Rack Mounts with external widths of 23" to 28". You have your choice of heights from 83" to 84" and depths from 30" to 48".
By using precise lengths, these ultra-flexible power cables allow smooth installation and increased airflow while saving significant cabinet space. TCS Color Coded Power Cables are all UL Listed and RoHS compliant.
1) Email us at info@server-rack-online.com
2) Call us toll free at 1-866-722-5776
3) Join us on Live Chat
4) Use the following contact form
Chatsworth GlobalFrame Racks | Height | Depth* | Rails | Width* |
Chatsworth GF-1A320 | 42U | 41.3" | 19" EIA | 24" |
Chatsworth GF-1A300 | 42U | 41.3" | 19" EIA | 24" |
Chatsworth GF-1B320 | 42U | 41.3" | 19" EIA | 30" |
Chatsworth GF-1B300 | 42U | 41.3" | 19" EIA | 30" |
Chatsworth GlobalFrame Server Racks | Height | Depth* | Rails | Width* |
Chatsworth GF- 1A320 - with sides | 42U | 41" | 19" EIA | 24" |
Chatsworth GF-1A300 - w/out sides | 42U | 41" | 19" EIA | 24" |
Chatsworth GF-1B320 - with sides | 42U | 41" | 19" EIA | 30" |
Chatsworth GF-1B300 - w/out sides | 42U | 41" | 19" EIA | 30" |
Chatsworth GF-1A420 - with sides | 42U | 48" | 19" EIA | 30" |
Chatsworth GF-1A400 - w/out sides | 42U | 48" | 19" EIA | 30" |
Chatsworth GF-1A421 - with sides | 42U | 48" | 19" EIA | 24" |
Chatsworth GF-1A401 - w/out sides | 42U | 48" | 19" EIA | 24" |
Chatsworth GF-1A422 - with sides | 42U | 48" | 19" EIA | 24" |
Chatsworth GF-1A402 - w/out sides | 42U | 48" | 19" EIA | 24" |
Chatsworth Relay Racks | Height | Depth | Rails | Width |
Chatsworth 55053-503 - Aluminum | 45U | 15" | 19" EIA | 20.31" |
Chatsworth 55053-703 - Black | 45U | 15" | 19" EIA | 20.31" |
Chatsworth 55053-715 | 51U | 15" | 19" EIA | 20.31" |
Chatsworth 55053-708 | 58U | 15" | 19" EIA | 20.31" |
Chatsworth Seismic Relay Racks | Height | Depth | Rails | Width |
Chatsworth 13886-703 | 44U | 15" | 19" EIA | 23" |
Chatsworth 13855-703 | 44U | 15" | 19" EIA | 19" |
Chatsworth 13856-703 | 44U | 15" | 19" EIA | 19" |
Chatsworth 23" EIA Relay Racks | Height | Depth | Rails | Width |
Chatsworth 48383-731 | 17U | 20" | 23" EIA | 23" |
Chatsworth 48383-720 | 24U | 20" | 23" EIA | 23" |
Chatsworth 48383-719 | 31U | 20" | 23" EIA | 23" |
Chatsworth 48383-700 | 34U | 20" | 23" EIA | 23" |
Chatsworth 48383-701 | 38U | 20" | 23" EIA | 23" |
Chatsworth 48383-702 | 41U | 20" | 23" EIA | 23" |
Chatsworth 48383-703 | 45U | 20" | 23" EIA | 23" |
Chatsworth 48383-705 | 48U | 20" | 23" EIA | 23" |
Chatsworth 48383-715 | 51U | 20" | 23" EIA | 23" |
Chatsworth 48383-717 | 55U | 20" | 23" EIA | 23" |
Chatsworth 48383-708 | 58U | 20" | 23" EIA | 23" |
Custom Rack Design:
We offer design assistance utilizing AutoCAD and CAD/Cam programming custom sheet metal fabricator and have helped customers in many industries including telecommunications, information technology, military and aerospace. If your requirements call for a unique height, width, depth, or a specialized application such as water or dust proofing, or a shock resistant rack, please complete our Rack Project Evaluation form or call us at 1-866-722-5776.
Server Racks Online has thousands of products on our website. Many of them can be "custom configured" to meet most application's requirements. Some applications require advanced rack cooling or power installations which require a system engineer to design and configure. For more details on how our expert engineers can design an advanced cooling or power infrastructure for you, please complete our Rack Project Evaluation form or call us at 1-866-722-5776.
]]>RK-1d / RK-1t Rackmount Desktop Keyboard offers its users a flexible, space saving, cost effective method of managing multiple servers from a single unit, either locally within the data center, or remotely Over-IP via the World Wide Web an optional integrated KVM.
MAC OS Keys
RK-1M Rackmount MAC Keyboard offers its users a flexible, space saving, cost effective method of managing multiple servers from a single unit, either locally within the data center, or remotely Over-IP via the World Wide Web an optional integrated KVM.
SUN Keys
RK-2d / RK-2t short depth rackmount Desktop Keyboard offers its users a flexible, space saving, cost effective method of managing multiple servers from a single unit locally within the data center.
MAC OS Keys
RK-2M short depth, rackmount MAC Keyboard offers its users a flexible, space saving, cost effective method of managing multiple servers from a single unit, locally within the data center.
SUN Keys
Quad Display LCD Drawer Panel Views
RP-117QD Specifications:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.4 in. (442 mm.) |
Depth | 23.6 in. (600 mm.) |
Weight | 26 lbs. (12 kg.) |
Samsung LCD Monitor | |
4:3 Screen Size | 17" |
Display Type | Active Matrix TFT |
Native Resolution | 1280 x 1024 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 1000 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1.3 / Tf=3.7 |
Pixel Pitch (H x V) | 0.264 / 0.264 |
The RP-117QD is a 1U Rackmount LCD Monitor with 17" Samsung Quad Display LCD.
RP-117QD Features & Benefits:
Quad Display LCD Drawer Panel Views
RP-119QD Specifications:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.4 in. (442 mm.) |
Depth | 23.6 in. (600 mm.) |
Weight | 29 lbs. (13 kg.) |
Samsung LCD Monitor | |
4:3 Screen Size | 19" |
Display Type | Active Matrix TFT |
Native Resolution | 1280 x 1024 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 1000 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1.3 / Tf=3.7 |
Pixel Pitch (H x V) | 0.294 / 0.294 |
RP-119QD Features & Benefits:
RP-120 Specifications:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.4 in. (442 mm.) |
Depth | 25.6 in. (650 mm.) |
Weight | 31 lbs. (14 kg.) |
Samsung LCD Monitor | |
4:3 Screen Size | 20" |
Display Type | Active Matrix TFT |
Native Resolution | 1600 x 1200 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 800 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1 / Tf=4 |
Pixel Pitch (H x V) | 0.255 / 0.255 |
RP-120 Features & Benefits:
NOTE: If interested in a Quad Display visit the RP-120QD page.
]]>
Quad Display LCD Drawer Panel Views
RP-120QD Specifications:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.4 in. (442 mm.) |
Depth | 25.6 in. (650 mm.) |
Weight | 31 lbs. (14 kg.) |
Samsung LCD Monitor | |
4:3 Screen Size | 20" |
Display Type | Active Matrix TFT |
Native Resolution | 1600 x 1200 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 800 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1 / Tf=4 |
Pixel Pitch (H x V) | 0.255 / 0.255 |
The RP-120QD is a 1U Rackmount LCD Monitor with 19" Samsung Quad Display LCD.
RP-120QD Features & Benefits:
Mechanical | |
Height | 12.2 in. (31.1 cm.) |
Width | 18.9 in. (48 cm.) |
Depth | 2.1 in. (5.3 cm.) |
Weight | 13.4 lbs. (6.1 kg.) |
Package Dimensions (HxWxD) | 4.9 x 20.8 x 19.5 in. (12.4 x 52.8 x 49.5 cm.) |
Package Weight | 18 lbs. (8.2 kg.) |
Environmental | |
Operating Temperature | 0 to 50°C Degree |
Storage Temperature | -5 to 60°C Degree |
Relative Humidity | 5~90%, non-condensing |
Shock | 10G acceleration (11ms duration) |
Vibration | 5~500Hz 1G RMS random vibration |
Power | Auto-sensing 100 to 240VAC, 50 / 60Hz |
LCD Screen | |
Display Size | 17" TFT |
Resolution | 1280x1024 |
Brightness (cd/m2) | 250 |
Colors | 16.7 M |
Contrast Ratio (typ) | 1000:1 |
Viewing angle (H/V) | 160° x 160° |
Active area (mm) | 338x270 |
Signal Input | VGA or DVI-D |
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
RP717 Features:
Mechanical | |
Height | 14 in. (35.5 cm.) |
Width | 18.9 in. (48 cm.) |
Depth | 2.1 in. (5.3 cm.) |
Weight | 12.5 lbs. (5.7 kg.) |
Package Dimensions (HxWxD) | 5.1 x 21.2 x 20.8 in. (12.9 x 53.8 x 52.8 cm.) |
Package Weight | 17.6 lbs. (8 kg.) |
Environmental | |
Operating Temperature | 0 to 50°C Degree |
Storage Temperature | -5 to 60°C Degree |
Relative Humidity | 5~90%, non-condensing |
Shock | 10G acceleration (11ms duration) |
Vibration | 5~500Hz 1G RMS random vibration |
Power | Auto-sensing 100 to 240VAC, 50 / 60Hz |
LCD Screen | |
Display Size | 19" TFT |
Resolution | 1280x1024 |
Brightness (cd/m2) | 250 |
Colors | 16.7 M |
Contrast Ratio (typ) | 1000:1 |
Viewing angle (H/V) | 170° x 160° |
Active area (mm) | 376x301 |
Signal Input | VGA or DVI-D |
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
RP819 Features:
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
]]>Mechanical | |
Height | 15.7 in. (39.8 cm.) |
Width | 18.9 in. (48 cm.) |
Depth | 2.5 in. (6.3 cm.) |
Weight | 18.5 lbs. (8.4 kg.) |
Package Dimensions (HxWxD) | 4.9 x 23 x 20.8 in. (12.4 x 58.4 x 52.8 cm.) |
Package Weight | 23.5 lbs. (10.7 kg.) |
Environmental | |
Operating Temperature | 0 to 50°C Degree |
Storage Temperature | -5 to 60°C Degree |
Relative Humidity | 5~90%, non-condensing |
Shock | 10G acceleration (11ms duration) |
Vibration | 5~500Hz 1G RMS random vibration |
Power | Auto-sensing 100 to 240VAC, 50 / 60Hz |
LCD Screen | |
Display Size | 20.1" TFT |
Resolution | 1600x1200 |
Brightness (cd/m2) | 300 |
Colors | 16.7 M |
Contrast Ratio (typ) | 800:1 |
Viewing angle (H/V) | 178° x 178° |
Active area (mm) | 408x306 |
Signal Input | VGA or DVI-D |
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
RP920 Features:
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
]]>Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
]]>Display Features
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
]]>Display Features
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
]]>RP-W119 Specifications:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.4 in. (442 mm.) |
Depth | 25.6 in. (650 mm.) |
Weight | 29 lbs. (13 kg.) |
Samsung LCD Monitor | |
Widescreen Size | 19" |
Display Type | Active Matrix TFT |
Native Resolution | 1440 x 900 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 1000 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1.3 / Tf=3.7 |
Pixel Pitch (H x V) | 0.284 / 0.284 |
RP-W119 Features & Benefits:
*NOTE: With a touch screen option, the height of the unit will be changed from 1U to 1.5U
]]>
Quad Display LCD Drawer Panel Views
RP-W119QD Specifications:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.5 in. (445 mm.) |
Depth | 25.6 in. (650 mm.) |
Weight | 29 lbs. (13 kg.) |
Samsung LCD Monitor | |
Widescreen Size | 19" |
Display Type | Active Matrix TFT |
Native Resolution | 1440 x 900 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 1000 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1.3 / Tf=3.7 |
Pixel Pitch (H x V) | 0.284 / 0.284 |
RP-W119QD Features & Benefits:
Mechanical | |
Height | 12.2 in. (31.1 cm.) |
Width | 18.9 in. (48 cm.) |
Depth | 2.3 in. (5.8 cm.) |
Weight | 13 lbs. (6.1 kg.) |
Package Dimensions (HxWxD) | 20.8 x 4.9 x 19.5 inch(529 x 124 x 495 mm) |
Package Weight | 18 lbs. (8.2 kg.) |
Environmental | |
Operating Temperature | 0 to 55°C Degree |
Storage Temperature | -5 to 60°C Degree |
Relative Humidity | 5~90%, non-condensing |
Shock | 10G acceleration (11ms duration) |
Vibration | 5~500Hz 1G RMS random vibration |
Power | Auto-sensing 100 to 240VAC, 50 / 60Hz |
LCD Screen | |
Display Size | 19" Widescreen TFT |
Resolution | 1440 x 900 |
Brightness (cd/m2) | 300 |
Colors | 16.7 M |
Contrast Ratio (typ) | 1000:1 |
Viewing angle (H/V) | 160° x 160° |
Active area (mm) | 408 x 255 |
Signal Input | VGA or DVI-D |
Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
]]>Available upgrades include:
For Multi-display control, DC power, SDI, and touchscreen options please call 1-866-722-5776.
]]>The AH SK-1 is a 1U, 21.7" deep rackmount keyboard drawer. The 104-key keyboard is SUN compatible and supports the SUN hot keys (Stop, Cut, Paste, Compose, etc.).
Features:
Specifications:
The AH SK-1601 is a 1U rackmount keyboard drawer with 16-port USB KVM Switch. The 104-key keyboard is SUN compatible and includes the SUN hot keys (Stop, Cut, Paste, Compose, etc.). The SK-1601 comes with the 16 CB-6 KVM cables needed for the KVM switch.
Features:
Specifications:
The AH SK-2 is a 1U, 14.6" deep rackmount keyboard drawer. The 104-key keyboard is SUN compatible and supports the SUN hot keys (Stop, Cut, Paste, Compose, etc.).
Features:
Specifications:
The AH SK-801 is a 1U rackmount keyboard drawer with 8-port USB KVM Switch. The 104-key keyboard is SUN compatible and includes the SUN hot keys (Stop, Cut, Paste, Compose, etc.). The SK-801 comes with the 8 CB-6 KVM cables needed for the KVM switch.
Features:
Specifications:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.4 in. (442 mm.) |
Depth | 23.6 in. (600 mm.) |
Weight | 26 lbs. (12 kg.) |
Samsung LCD Monitor | |
4:3 Screen Size | 17" |
Display Type | Active Matrix TFT |
Native Resolution | 1280 x 1024 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 1000 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1.3 / Tf=3.7 |
Pixel Pitch (H x V) | 0.264 / 0.264 |
SP-117 Features & Benefits:
Mechanical | |
Height | 1.73 in. (44 mm.) |
Width | 17.4 in. (442 mm.) |
Depth | 23.6 in. (600 mm.) |
Weight | 29 lbs. (13 kg.) |
Samsung LCD Monitor | |
4:3 Screen Size | 19" |
Display Type | Active Matrix TFT |
Native Resolution | 1280 x 1024 |
Brightness (cd/m2) | 300 |
Contrast Ratio | 1000 : 1 |
Viewing Angle (H x V) | 160 / 160 |
Display Color | 16.7M |
Response Time | Tr=1.3 / Tf=3.7 |
Pixel Pitch (H x V) | 0.294 / 0.294 |
SP-119 Features & Benefits:
The RK-401d is a combination keyboard, trackball and 4-Port KVM Switch in a drawer with adjustable brackets. The SR-1 conveniently fits in 1U of rack space allowing you to better utilize space in your server rack. and control up to 4 PC's.
1U Keyboard Drawer w/Trackball, lock and Gel Wrist Pad, 4 Port KVM Comes with 4-Port KVM Switch. Comes with Four 6' KVM Cables
]]>Specifications:
1024 x 768
| Power supply
182cm |
Specifications:
1080 x 1024
| Power supply
182cm |
AH RP615 Specifications | |
LCD | |
Panel | Samsung 15" LCD Panel |
Screen Type | TFT |
Display Area | 304.1(H) x 228.1(V) mm |
Contrast Ratio | 300:1 |
Viewing Angle | 140 ° (H) x 120 ° (V) (Typ.) |
Resolution | 1024 x 768 |
Pixel pitch | 0.297(H) x 0.297(W) mm |
Response Time | Tr=5ms, Tf=20ms (Typ.) |
Brightness | 450 cd/m2 |
Panel Color | 16.2M |
Back Light | 4 CCFTs (Cold Cathode Fluorescent tube) |
Video | |
Horizontal Synchronization | 48 - 60 KHz (Typ.) |
Vertical Synchronization | 60-75 Hz (Typ.) |
Input Signal | Analog RGB 0.7Vp-p |
Power Management | VESA DPMS |
Control | |
OSD Control | Brightness, Contrast, Colour, Clock,
|
External Connection | |
Power Input | 12V/5A DC adapter |
Video Input | 15-pin D-Sub connector |
Product dimension | 48(W) x 26.5(H) x 4(D)cm |
Packing dimension | 42(L) x 57(W) x 21(H)cm |
Net / gross weight | 11.023 lb / 15.432 lb 5kg / 7kg |
The iBootBar reboot power strip allows you to control each outlet independently from Web, Telnet, SNMP and have network access plus out-of-band control via serial port and internal modem with both data and DTMF tone dial control. iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets, which can be switched in pairs for redundant systems, or individually for higher current devices.
The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or reboot functions. Telephone users are guided with voice prompts and status information. This remote reboot unit continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Alarms are delivered both by email and SNMP traps.
Dataprobe iBootBar Reboot Power Strip Backside
The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface. Multiple users, each with administrator assigned rights only see the outlets they are responsible for. Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies. In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP.
Dataprobe iBootBar Web Interface
Dataprobe iBootBar Remote Reboot Features:
Dataprobe iBB-2N15 Specifications:
Mechanical | |
Height | 1.75 in. (4.5 cm.) |
Width | 19.0 in. (48.25 cm.) |
Depth | 6.00 in. (15.25 cm.) |
Weight | 7 lbs. (3.25 kg.) |
Rackmount Units | 1U |
Environmental | |
Operating Temperature | 0 to 40o C |
Storage Temperature | -10 to 85o C |
Relative Humidity | 0 to 95% Non-Condensing |
A/C Input | NEMA 5-15 Linecord 115VAC 15 Amps combined total switched per Linecord Supplied with NEMA 5-15 Linecord, attached |
Network | 10/100 Ethernet Web, Telnet, SNMP, SMTP Port Assignable for Web and Telnet. SSL on Web control |
Serial Port | D9 Serial, configured as DCE. to 115.2Kbps |
Internal Modem Option | 56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF) control |
Switched Outlets | 8 x NEMA 5-15 Receptacle, 12 Amps Max per Receptacle, 15 Amps Max Total per Linecord |
Compliance | UL / cUL Listed CE Marked RoHS / WEEE Compliant FCC Part 15 Class B |
The iBootBar reboot power strip allows you to control each outlet independently from Web, Telnet, SNMP and have network access plus out-of-band control via serial port and internal modem with both data and DTMF tone dial control. iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets, which can be switched in pairs for redundant systems, or individually for higher current devices.
The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or reboot functions. Telephone users are guided with voice prompts and status information. This remote reboot unit continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Alarms are delivered both by email and SNMP traps.
Dataprobe iBootBar Reboot Power Strip Backside
The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface. Multiple users, each with administrator assigned rights only see the outlets they are responsible for. Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies. In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP.
Dataprobe iBootBar Web Interface
Dataprobe iBootBar Remote Reboot Features:
Dataprobe iBB-2N15-M Specifications:
Mechanical | |
Height | 1.75 in. (4.5 cm.) |
Width | 19.0 in. (48.25 cm.) |
Depth | 6.00 in. (15.25 cm.) |
Weight | 7 lbs. (3.25 kg.) |
Rackmount Units | 1U |
Environmental | |
Operating Temperature | 0 to 40o C |
Storage Temperature | -10 to 85o C |
Relative Humidity | 0 to 95% Non-Condensing |
A/C Input | NEMA 5-15 Linecord 115VAC 15 Amps combined total switched per Linecord Supplied with NEMA 5-15 Linecord, attached |
Network | 10/100 Ethernet Web, Telnet, SNMP, SMTP Port Assignable for Web and Telnet. SSL on Web control |
Serial Port | D9 Serial, configured as DCE. to 115.2Kbps |
Internal Modem Option | 56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF) control |
Switched Outlets | 8 x NEMA 5-15 Receptacle, 12 Amps Max per Receptacle, 15 Amps Max Total per Linecord |
Compliance | UL / cUL Listed CE Marked RoHS / WEEE Compliant FCC Part 15 Class B |
The iBootBar reboot power strip allows you to control each outlet independently from Web, Telnet, SNMP and have network access plus out-of-band control via serial port and internal modem with both data and DTMF tone dial control. iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets, which can be switched in pairs for redundant systems, or individually for higher current devices.
The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or reboot functions. Telephone users are guided with voice prompts and status information. This remote reboot unit continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Alarms are delivered both by email and SNMP traps.
Dataprobe iBootBar Reboot Power Strip Backside
The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface. Multiple users, each with administrator assigned rights only see the outlets they are responsible for. Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies. In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP.
Dataprobe iBootBar Web Interface
Dataprobe iBootBar Remote Reboot Features:
Dataprobe iBB-2N20 Specifications:
Mechanical | |
Height | 1.75 in. (4.5 cm.) |
Width | 19.0 in. (48.25 cm.) |
Depth | 6.00 in. (15.25 cm.) |
Weight | 7 lbs. (3.25 kg.) |
Rackmount Units | 1U |
Environmental | |
Operating Temperature | 0 to 40o C |
Storage Temperature | -10 to 85o C |
Relative Humidity | 0 to 95% Non-Condensing |
A/C Input | NEMA 5-20 Linecord 115VAC 20 Amps combined total switched per Linecord Supplied with NEMA 5-20 Linecord, attached |
Network | 10/100 Ethernet Web, Telnet, SNMP, SMTP Port Assignable for Web and Telnet. SSL on Web control |
Serial Port | D9 Serial, configured as DCE. to 115.2Kbps |
Internal Modem Option | 56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF) control |
Switched Outlets | 8 x NEMA 5-15 Receptical, 12 Amps Max per Receptical, 20 Amps Max Total per Linecord |
Compliance | UL / cUL Listed CE Marked RoHS / WEEE Compliant FCC Part 15 Class B |
The iBootBar reboot power strip allows you to control each outlet independently from Web, Telnet, SNMP and have network access plus out-of-band control via serial port and internal modem with both data and DTMF tone dial control. iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets, which can be switched in pairs for redundant systems, or individually for higher current devices.
The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or reboot functions. Telephone users are guided with voice prompts and status information. This remote reboot unit continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Alarms are delivered both by email and SNMP traps.
Dataprobe iBootBar Reboot Power Strip Backside
The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface. Multiple users, each with administrator assigned rights only see the outlets they are responsible for. Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies. In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP.
Dataprobe iBootBar Web Interface
Dataprobe iBootBar Remote Reboot Features:
Dataprobe iBB-N15 Specifications:
Mechanical | |
Height | 1.75 in. (4.5 cm.) |
Width | 19.0 in. (48.25 cm.) |
Depth | 6.00 in. (15.25 cm.) |
Weight | 7 lbs. (3.25 kg.) |
Rackmount Units | 1U |
Environmental | |
Operating Temperature | 0 to 40o C |
Storage Temperature | -10 to 85o C |
Relative Humidity | 0 to 95% Non-Condensing |
A/C Input | NEMA 5-15 Linecord 115VAC 15 Amps combined total switched per Linecord Supplied with NEMA 5-15 Linecord, attached |
Network | 10/100 Ethernet Web, Telnet, SNMP, SMTP Port Assignable for Web and Telnet. SSL on Web control |
Serial Port | D9 Serial, configured as DCE. to 115.2Kbps |
Internal Modem Option | 56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF) control |
Switched Outlets | 8 x NEMA 5-15 Receptacle, 12 Amps Max per Receptacle, 15 Amps Max Total per Linecord |
Compliance | UL / cUL Listed CE Marked RoHS / WEEE Compliant FCC Part 15 Class B |
The iBootBar reboot power strip allows you to control each outlet independently from Web, Telnet, SNMP and have network access plus out-of-band control via serial port and internal modem with both data and DTMF tone dial control. iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets, which can be switched in pairs for redundant systems, or individually for higher current devices.
The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or reboot functions. Telephone users are guided with voice prompts and status information. This remote reboot unit continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Alarms are delivered both by email and SNMP traps.
Dataprobe iBootBar Reboot Power Strip Backside
The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface. Multiple users, each with administrator assigned rights only see the outlets they are responsible for. Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies. In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP.
Dataprobe iBootBar Web Interface
Dataprobe iBootBar Remote Reboot Features:
Dataprobe iBB-N15-M Specifications:
Mechanical | |
Height | 1.75 in. (4.5 cm.) |
Width | 19.0 in. (48.25 cm.) |
Depth | 6.00 in. (15.25 cm.) |
Weight | 7 lbs. (3.25 kg.) |
Rackmount Units | 1U |
Environmental | |
Operating Temperature | 0 to 40o C |
Storage Temperature | -10 to 85o C |
Relative Humidity | 0 to 95% Non-Condensing |
A/C Input | NEMA 5-15 Linecord 115VAC 15 Amps combined total switched per Linecord Supplied with NEMA 5-15 Linecord, attached |
Network | 10/100 Ethernet Web, Telnet, SNMP, SMTP Port Assignable for Web and Telnet. SSL on Web control |
Serial Port | D9 Serial, configured as DCE. to 115.2Kbps |
Internal Modem Option | 56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF) control |
Switched Outlets | 8 x NEMA 5-15 Receptacle, 12 Amps Max per Receptacle, 15 Amps Max Total per Linecord |
Compliance | UL / cUL Listed CE Marked RoHS / WEEE Compliant FCC Part 15 Class B |
Network managers can have remote reboot at the click of a mouse with the iBootBar. Each iBootBar supports eight servers, routers or other A/C powered devices for reboot, security shutdown or energy management. Control each outlet independently with web browser, telnet, SNMP manager. You are in control of your critical systems anywhere, anytime.
Link up to 16 iBootBars together to manage 128 outlets from a single web page. Monitor power usage, with automatic notification of critical conditions.
Automatically monitor critical components and auto reboot them if they are unavailable. You entire data center is protected from downtime.
Additional models are available with an internal modem that can be contacted through a data call or from any tone dial handset for instant DTMF tone commands.
Dataprobe iBootBar Reboot Power Strip Backside
The web browser interface provides the easiest means of managing multiple outlets. One master unit can be connected to 15 expansion units, managing 128 outlets from a single web page interface. Multiple users, each with administrator assigned rights only see the outlets they are responsible for. Outlets can be linked together in logical groups, even across managed units, to allow simultaneous power control or reboot with a single command. Groups can also be used to link pairs of outlets together to reboot devices with dual redundant power supplies. In addition to the Web interface, the outlets can also be controlled via Telnet, Serial, and SNMP.
Dataprobe iBootBar Web Interface
Dataprobe iBootBar Remote Reboot Features:
Dataprobe iBB-N20 Specifications:
Mechanical | |
Height | 1.75 in. (4.5 cm.) |
Width | 19.0 in. (48.25 cm.) |
Depth | 6.00 in. (15.25 cm.) |
Weight | 7 lbs. (3.25 kg.) |
Rackmount Units | 1U |
Environmental | |
Operating Temperature | 0 to 40o C |
Storage Temperature | -10 to 85o C |
Relative Humidity | 0 to 95% Non-Condensing |
A/C Input | NEMA 5-20 Linecord 115VAC 20 Amps combined total switched per Linecord Supplied with NEMA 5-20 Linecord, attached |
Network | 10/100 Ethernet Web, Telnet, SNMP, SMTP Port Assignable for Web and Telnet. SSL on Web control |
Serial Port | D9 Serial, configured as DCE. to 115.2Kbps |
Internal Modem Option | Not available on this model. |
Switched Outlets | 8 x NEMA 5-15 Receptical, 12 Amps Max per Receptical, 20 Amps Max Total per Linecord |
Compliance | UL / cUL Listed CE Marked RoHS / WEEE Compliant FCC Part 15 Class B |
Dataprobe iBoot uses international standard IEC320 Connections and is autosensing for worldwide use. Line cord and Output Cord are included for North America. iBoot handles circuits up to 12 Amps (10 Amps at 230VAC).
Simple Web browser control makes iBoot easy to operate from anywhere.
Use Dataprobe iBoot for:
Dataprobe iBoot Features and Benefits:
Version 2.0 Now Released New Features Include | |
Auto Ranging Power Supply | Auto sensing power supply removes 115/230VAC switch. Just plug it in! |
Improved 10/100 Hubbing | New 10/100 hub auto detects uplink/downlink. Plus better 100base-T throughput on busy networks. |
Heartbeat Detector | Auto-Ping in reverse. Send a periodic TCP message to iBoot from your server, kiosk or other device. When the heartbeat fails, iBoot will automatically reboot the system. Free software tools and developer assistance. |
iBoot Control Center Software | Control an unlimited number of iBoots from one software application. Group iBoots for simultaneous actions. Schedule time of day activities like reboot or shutdown every night. |
iBoot Tools | ||
Operations Manuals | Installation and Operations Instructions
| Download Ver 1.5 Download Ver 2.0 |
Catalog Sheet | Two page sales brochure on iBoot | Download .pdf |
Reset and IP Address Utility | Set IP address, Reset lost passwords and factory defaults | Download Now |
TCP/IP Control Protocol | Operate iBoot directly via UDP Messages. Integrate iBoot into your network management software or script | Download Now |
iBoot Control Program | Windows Utility to Operate iBoot | Download Program |
iBoot Control Center | Windows Program to operate multiple iBoots. Group and Time of Day functions | Beta Release Only Download Now |
The following are for Version 2.0 and above | ||
Heartbeat Protocol | Integrate iBoot's Heartbeat Detector into your software | Download Now |
Heartbeat Generator | Windows Program to send Heartbeats | Download Now |
Dataprobe iBoot Specifications:
Power | 105-240 VAC Auto Ranging |
Connectors: Power Input | IEC 320 Plug. Linecord for North America Included |
Power Out | IEC 320 Receptacle. Extension Cord for N.America Included |
Switching: | Up to 12 Amps at 105-125 VAC, 10 Amps at 210-240 VAC |
Communication | Dual 10/100base-T, Built in Hub |
Cat5 Cable Provided | |
Protocols | IP Addressable. HTTP Web Server built-in |
TCP Messaging Protocol Auto-Ping TCP Protocol Heartbeat Detector Protocol | |
Browser Requirements | Form Processing Browser Required Netscape 3.0 or IE 3.0 or greater |
Security | Dual Password Protected |
Physical | Height 2.25 in.Width 4.50 in. Depth 6.00 in.Weight 1.25 lb. |
Dataprobe iBoot-DC Specifications
Power | 5 - 48 VDC Auto Ranging +VDC and -VDC Systems Supported | |
Power Switching | 5 Amps up to -29.9 to 29.9 VDC. 2 Amps -48 to -30 VDC 2 Amps +30 to +48 VDC Positive Terminal Switched. Negative Switched Available on Special Order | |
Power Connectors | Power Inlet: Screw Terminals Power Outlet: Screw Terminals | |
Network | 10/100base-T, Auto sensing Uplink/Downlink | |
Protocols | IP Addressable. DHCP or Static HTTP Web Server built-in, Port Assignable Telnet Server built-in, Port Assignable DxP Messaging Protocol, Port Assignable Auto-Ping TCP Protocol Heartbeat Detector Protocol | |
Browser | Form Processing Browser Required Mozilla 3.0 or IE 3.0 or greater | |
Security | Dual Password Protected, User and Admin | |
Physical | H x W x D: 2.0" x 3.2" x 4.2" (60mm x 82mm x 107mm) Operating Temperature 0 to 50 Deg. C | |
Reliability | MTBF 360,000 Hours Operating Cycles 10,000,000 Mechanical. 100,000 at Maximum Load | |
Compliance | RoHS WEEE FCC Part 15 Class B |
Dataprobe iBoot-G2 Application Diagram
Dataprobe iBoot-G2 Specifications:
Mechanical | |
Width | 3.25 in. (8.3 cm.) |
Height | 2.00 in. (5.08 cm.) |
Depth | 4.25 in. (10.8 cm.) |
Network | 10/100 |
Switching | 110-240 VAC 12 Amps Max |
Features | Web, Telnet, AutoPing = up to 4 IP Addresses DxP Protocol, Real Time Scheduling, Heartbeat |
Physical | Wall and DIN Mountable |
Temperature | 0 to 50 Deg C |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1000VA / 770 Watts Input Voltage: 120V 50/60 Hz Input Connection: 5-15P Outlets: (8) 5-15R Form Factor: Tower The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1000VA / 770 Watts Input Voltage: 120V, 50/60 Hz Input Connection: 5-15P Outlets: (5) 5-15R Form Factor: 1U Rackmount The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1440VA / 1100 Watts Input Voltage: 120V 50/60 Hz Input Connection: 5-15P Outlets: (8) 5-15R Form Factor: Tower The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1440VA / 1100 Watts Input Voltage: 120V, 50/60 Hz Input Connection: 5-15P Outlets: (5) 5-15R Form Factor: 1U Rackmount The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1440VA / 1440 Watts Input Voltage: 120V, 50/60 Hz Input Connection: 5-15P Outlets: (8) 5-15R Form Factor: 2U Rackmount or Tower UPS The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1550VA / 1100 Watts Input Voltage: 208 or 230V 50/60 Hz Input Connection: C14 Outlets: (8) C13 Form Factor: Tower The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1550VA / 1100 Watts Input Voltage: 208 or 230V 50/60 Hz Input Connection: C14 Outlets: (6) C13 Form Factor: 1U Rackmount The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 1950VA / 1920 Watts Input Voltage: 120V, 50/60 Hz Input Connection: 5-20P Outlets: (8) 5-15R Form Factor: 2U Rackmount or Tower UPS The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 3000VA / 2700 Watts Input Voltage: 120V, 50/60 Hz Input Connection: L5-30P Outlets: (6) 5-20R, (1) L5-30R Form Factor: 2U Rackmount or Tower UPS The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 550VA / 420 Watts Input Voltage: 120V, 50/60 Hz Input Connection: 5-15P Outlets: (5) 5-15R Form Factor: 1U Rackmount The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 750VA / 600 Watts Input Voltage: 120V 50/60 Hz Input Connection: 5-15P Outlets: (8) 5-15R Form Factor: Tower The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 750VA / 600 Watts Input Voltage: 120V, 50/60 Hz Input Connection: 5-15P Outlets: (5) 5-15R Form Factor: 1U Rackmount The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 850VA / 600 Watts Input Voltage: 208 or 230V 50/60 Hz Input Connection: C14 Outlets: (6) C13 Form Factor: Tower The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: Eaton Series 5 UPSs are most effective against five power problems: power failures, power sags, power surges, under-voltage and over-voltage. They also offer a degree of protection against other power problems. Some of the damages you risk by not using a Series 5 UPS include premature hardware failure, data loss and corruption, data errors, keyboard lockup, storage loss and system lockup. Series 5 UPSs are recommended for everything from small network systems to enterprise networking environments. ]]>Power Rating: 850VA / 600 Watts Input Voltage: 208 or 230V 50/60 Hz Input Connection: C14 Outlets: (4) C13 Form Factor: 1U Rackmount The Eaton 5P Line-Interactive UPS delivers reliable enterprise class backup power with impressive power efficiency - 20% more wattage compared to traditional UPSs, 50% increase in battery life, and a power rating of up to 99%. A graphical LCD Display allows viewing UPS status in a single glance. When paired with Intelligent Power Software Suite, the 5P allows you to seamlessly manage your connected equipment remotely. Learn More: 5P Accessories by Model]]>Included Gigabit Network Interface Offers 24/7 Remote AccessThe NETWORK-M2 network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions. Optional Gigabit Network Interface Offers 24/7 Remote Access The NETWORK-M2 network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. NEMA 5-15R Outlets Protect Your Connected ComponentsEight managed NEMA 5-15R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads. Rotating LCD Interface and LED Status Bar keep you informed at a glance. The high-contrast front-panel LCD provides detailed alarms and notifications to help diagnose any issues. The lower tri-color LED bar monitors UPS status: a blue light means all is well, a yellow light means your attention is needed, and a red light indicates a critical issue that demands immediate action. The interface rotates to accommodate both rack-mount and tower configurations. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). ]]> Input Voltage: 120V 50/60 Hz Input Connection:NEMA 5-15P Outlets: (8) 5-15R ]]> Input Voltage: 120V 50/60 Hz Input Connection:NEMA 5-15P Outlets: (8) 5-15R ]]> Included Gigabit Network Interface Offers 24/7 Remote AccessThe NETWORK-M2 network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions. Optional Gigabit Network Interface Offers 24/7 Remote Access The NETWORK-M2 network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. C13 Outlets Protect Your Connected ComponentsEight managed C13 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads. Rotating LCD Interface and LED Status Bar keep you informed at a glance. The high-contrast front-panel LCD provides detailed alarms and notifications to help diagnose any issues. The lower tri-color LED bar monitors UPS status: a blue light means all is well, a yellow light means your attention is needed, and a red light indicates a critical issue that demands immediate action. The interface rotates to accommodate both rack-mount and tower configurations. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). ]]> Input Voltage: 120 V 50/60 Hz Input Connection:NEMA 5-15P Outlets: (8) 5-15R ]]> Optional Gigabit Network Interface Offers 24/7 Remote AccessThe NETWORK-M2 network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. NEMA 5-15R Outlets Protect Your Connected ComponentsEight managed 5-15R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Rotating LCD Interface and LED Status Bar keep you informed at a glance.The high-contrast front-panel LCD provides detailed alarms and notifications to help diagnose any issues. The lower tri-color LED bar monitors UPS status: a blue light means all is well, a yellow light means your attention is needed, and a red light indicates a critical issue that demands immediate action. The interface rotates to accommodate both rack-mount and tower configurations. Advanced Communications Ports Allow for Automatic Saves and ShutdownsRS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). Features
Input Voltage: 120V 50/60 Hz Input Connection: 5-15P Outlets: (8) 5-15R ]]> Input Voltage: 120V 50/60 Hz Input Connection: 5-15P Outlets: (8) 5-15R ]]> EATON 5PX G2Introducing the latest addition to Eaton's 5 series UPS line, the Eaton 5PX G2 rackmount and tower UPS provides the maximum power possible at each power rating. The 5PX G2 UPS has power ratings ranging from 1 to 3 kVA, with low and high voltage options and offers up to four optional external battery modules for extra runtime. With select 2 and 3 kVA models, the 5PX G2 UPS offers a reduced depth that conserves space for high density wallmount rack installations.
|
*Available on some models
]]>Power distribution is facilitated through different pieces of equipment that take the power conditioned by your uninterruptible power supply (UPS) and send it to your IT equipment. Power distribution solutions can manage and even control energy consumption in smaller environments as well as large data center applications. Distributing power efficiently results in reduced operating costs and increased reliability.Whether you need integrated power distribution within a few racks or power throughout your data center, there are many solutions to consider when building out your power infrastructure. Understanding your environment and power needs allows you to begin right-sizing your distribution equipment.
]]>Eaton 3S (350-750 VA) Standby UPS - Tower UPS | Voltage | Capacity | Input | Output |
---|---|---|---|---|
Eaton 3S 350 | 120 V | 350VA / 200W | 5-15P (90°, 6ft cord) | (8) 5-15R |
Eaton 3S 550 | 120 V | 550VA / 330W | 5-15P (90°, 6ft cord) | (8) 5-15R |
Eaton 3S 750 | 120 V | 750VA / 450W | 5-15P (90°, 6ft cord) | (10) 5-15R |
Eaton 5P (750-3000 VA) Line Interactive - Tower UPS | Voltage | Capacity | Input | Output |
---|---|---|---|---|
Eaton 5P 750 | 120 V | 750VA / 600W | 5-15P | (8) 5-15R |
Eaton 5P 850G | 208 V | 850VA / 600W | C14 | (6) C13 |
Eaton 5P 1000 | 120 V | 1000VA / 770W | 5-15P | (8) 5-15R |
Eaton 5P 1500 | 120 V | 1440VA / 1100W | 5-15P | (8) 5-15R |
Eaton 5P 1550G | 208 V | 1550VA / 1100W | C14 | (8) C13 |
Eaton 5P 1500RT | 120 V | 1440VA / 1400W | 5-15P | (8) 5-15R |
Eaton 5P 2200RT | 120 V | 1950VA / 1920W | 5-20P | (8) 5-15R |
Eaton 5P 3000RT | 120 V | 3000VA / 2700W | L5-30P | (6) 5-20R, (1) L5-30R |
Eaton 5P (550-3000 VA) Line Interactive - Rackmount UPS | Voltage | Capacity | Input | Output |
---|---|---|---|---|
Eaton 5P 550R | 120 V | 550VA / 420W | 5-15P | (5) 5-15R |
Eaton 5P 750R | 120 V | 750VA / 600W | 5-15P | (5) 5-15R |
Eaton 5P 850GR | 208 V | 850VA / 600W | C14 | (4) C13 |
Eaton 5P 1000R | 120 V | 1000VA / 770W | 5-15P | (5) 5-15R |
Eaton 5P 1500R | 120 V | 1440VA / 1100W | 5-15P | (5) 5-15R |
Eaton 5P 1550GR | 208 V | 1550VA / 1100W | C14 | (6) C13 |
Eaton 5P 1500RT | 120 V | 1440VA / 1400W | 5-15P | (8) 5-15R |
Eaton 5P 2200RT | 120 V | 1950VA / 1920W | 5-20P | (8) 5-15R |
Eaton 5P 3000RT | 120 V | 3000VA / 2700W | L5-30P | (6) 5-20R, (1) L5-30R |
Eaton 5PX (1-3 kVA) Line Interactive - Rack/Tower UPS | Voltage | Capacity | Input | Output |
---|---|---|---|---|
Eaton 5PX 1000RT | 120 V | 1000VA / 1kW | 5-15P | (8) 5-15R |
Eaton 5PX 1500RT | 120 V | 1440VA / 1.44kW | 5-15P | (8) 5-15R |
Eaton 5PX 1500RTN - w/ Network Card | 120 V | 1440VA / 1.44kW | 5-15P | (8) 5-15R |
Eaton 5PX 1500iRT | 208 V | 1440VA / 1.44kW | C14-10A | (8) C13-10A |
Eaton 5PX 2200RT | 120 V | 1950VA / 1.92kW | 5-20P | (8) 5-20R |
Eaton 5PX 2200RTN - w/ Network Card | 120 V | 1950VA / 1.92kW | 5-20P | (8) 5-20R |
Eaton 5PX 2200iRT | 208 V | 1950VA / 1.92kW | C20-16A | (1) C19-16A, (8) C13-10A |
Eaton 5PX 3000RT2U | 120 V | 3000VA / 2.7kW | L5-30P | (1) L5-30R, (6) 5-20R |
Eaton 5PX 3000RTN - w/ Network Card | 120 V | 3000VA / 2.7kW | L5-30P | (6) 5-20R, (1) L5-30R |
Eaton 5PX 3000iRT2U | 208 V | 3000VA / 2.7kW | C20-16A | (1) C19-16A, (8) C13-10A |
Eaton 5PX 3000iRTN - w/ Network Card | 208 V | 3000VA / 2.7kW | C20 | (8) C13, (1) C19 |
Eaton 5PX 3000RT3U | 120 V | 3000VA / 2.7kW | L5-30P | (1) L5-30R, (6) 5-20R |
Powerware 9130 Rackmount UPS Power - Double Conversion | Voltage | Capacity | Input | Output |
---|---|---|---|---|
Powerware PW9130L700R-XL2U | 120 V | 700 VA / 630 W | 5-15P | (6) 5-15R |
Powerware PW9130L1000R-XL2U | 120 V | 1000 VA / 900W | 5-15P | (6) 5-15R |
Powerware PW9130L1500R-XL2U | 120 V | 1500 VA / 1350 W | 5-15P | (6) 5-15R |
Powerware PW9130L2000R-XL2U | 120 V | 2000 VA / 1800 W | 5-20P | (6) 5-20R, (1) L5-20R |
Powerware PW9130L2500R-XL2U | 120 V | 2500 VA / 2250 W | L5-30P | (6) 5-20R, (1) L5-30R |
Powerware PW9130L3000R-XL2U | 120 V | 3000 VA / 2700 W | L5-30P | (6) 5-20R, (1) L5-30R |
Eaton Powerware is a leading global provider of comprehensive power quality and backup power management solutions. Powerware solutions include the broadest range of UPS System products and services available today. Based on the parameters defined by your application, you can select an uninterruptible power system (UPS) from the series that best matched your power protection needs.
Series 3 UPS - Basic Solution
Eaton's Series 3 UPS primarily protects against three of the nine power problems including power failure, power sags, and power surges. This protection is necessary in order to prevent damage such as data loss, file corruption, flickering lights, hardware damage, and equipment shutoff.
Series 5 UPS - Intermediate Solution
The Powerware Series 5 UPSs are most effective against five power problems (power failures, power sags, power surges, under-voltage, and over-voltage) and offer a degree of protection against other power problems. The level of protection these UPSs give is necessary to prevent damage such as data loss and corruption, data error, keyboard lockup, storage loss, and system lockup. The Series 5 UPSs are recommended for small network systems to enterprise network environments.
Series 9 UPS - Advanced Enterprise Solution
Eaton's Series 9 UPSs protect against all nine power problems: power failures, power sags, power surges, under-voltage, electrical line noise, over-voltage, frequency variation, switching transients and harmonic distortion. Series 9 comprehensive protection minimizes the opportunity for component stress, burned circuit boards, data crashes and program failures. Series 9 UPSs offer the highest level of power protection available and are always recommended for mission-critical applications like server farms, hospitals and Voice-over-Internet-Protocol (VoIP) applications.
PW9125-2000 Specifications:
Mechanical | |
Height | 3.5 in. (89 mm.) |
Width | 17 in. (432 mm.) |
Depth | 19.4 in. (494 mm.) |
Weight | 50 lbs. (23 kg.) |
Power Rating | 2000 VA / 1400 Watt |
Input Connection | 5-20P |
Output Connections | (2) 5-15R, (4) 5-20R |
The Powerware PW9125 2000 20R is an uninterruptible power system (UPS) which resolves utility power problems and supplies continuous, conditioned power to all connected equipment. The Powerware 9125 is a double-conversion online UPS, which means it is constantly conditioning and controlling AC output during normal operating conditions. Unlike other commercially available technologies, a double-conversion online design assures that in the event of a utility power failure, there is zero delay transferring to backup power.
]]>Electrical Input | |
Voltage | 120Vac Nominal |
On Line Voltage Range | +20% for nominal voltage at full load |
Nominal Input Frequency | 45-65 Hz, 50/60 Hz; auto-sensing |
Input Protection | Reset-able circuit breaker |
Connection | 6 ft. cord w/5-I5P |
Electrical Output | |
Power Out | 500VA / 320W |
Online Regulation | -10%, +6% of nominal voltageNominal -10% to +8% |
On Battery Output Voltage | 115Vac +10% to -12%, 230Vac + 10% to -12% |
On Battery Frequency Regulation | +/-0.1 Hz of nominal frequency |
Voltage Wave Shape | Sine wave (during normal and battery operation) |
Indicators and Controls | |
Front Panel LEDs | Power on, on battery, overload, and battery fault |
Front Panel Buttons | On/Off and alarm silence/self-test |
Communications Port | DB9 female (UPS ships with communications cable); USB Interface Adapter is optional |
Power Factor | 0.64 |
Battery | |
Battery Type | Sealed, maintenance-free lead-acid; starved electrolyte |
Battery Description | (1) 12 V, 9 Ah |
Battery Recharge | < 3 hours to 90% capacity |
Battery Runtime | 5 minutes minimum |
Start-On-Battery | Startup with UPS batteries in absence of utility power |
General | |
Topology | Line-interactive |
Network Transient Protector | In and out RJ11 jack for telephone/modem protection (120 V models only) or RJ45 for 10Base-T network cable; UL497A tested |
Environmental and safety | |
Operating Temperature | 0oC to 40oC (32oF to 104oF) UL tested at 25oC (77oF) |
Safety Markings | UL, cUL, and CSA |
Safety Conformance | UL 1778, CAN/CSA C22.2, No. 107.1 |
EMC Markings | FCC Class B |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Immunity | IEC 801-2, -3, -4 |
Transit/Storage Temp. | -15oC to 55oC (5oF to 131oF) |
Audible Noise | < 45 dBA typical |
Relative Humidity | 5-95% non-condensing |
The Powerware PW5115-500 UPS offers excellent backup power protection and power quality management for PCs, small-office-home-office (SOHO) equipment, NT workstations, and small internet-working devices. Delivering basic surge protection and backup power, the Powerware PW5115-500 additionally offers the best UPS power protection against five of the nine common power quality problems.
PW5115-500 Features and Benefits:
Electrical Input | |
Voltage | 120 Vac Nominal |
On Line Voltage Range | +20% for nominal voltage at full load |
Nominal Input Frequency | 45-65 Hz, 50/60 Hz; auto-sensing |
Input Protection | Reset-able circuit breaker |
Connection | 6 ft. cord w/5-I5P |
Electrical Output | |
Power Levels | 750VA / 500W |
Online Regulation | -10%, +6% of nominal voltageNominal -10% to +8% |
On Battery Frequency Regulation | +/-0.1 Hz of nominal frequency |
Voltage Wave Shape | Sine wave (during normal and battery operation) |
Indicators and Controls | |
Front Panel LEDs | Power on, on battery, overload, and battery fault |
Front Panel Buttons | On/Off and alarm silence/self-test |
Communications Port | DB9 female (UPS ships with communications cable); USB Interface Adapter is optional |
Power Factor | 0.67 |
Battery | |
Battery Type | Sealed, maintenance-free lead-acid; starved electrolyte |
Battery Description | (2) 12 V, 7.2 Ah |
Battery Recharge | < 3 hours to 90% capacity |
Battery Runtime | 5 minutes minimum; See Battery Runtimes table |
Start-On-Battery | Startup with UPS batteries in absence of utility power |
General | |
Topology | Line-interactive |
Network Transient Protector | In and out RJ11 jack for telephone/modem protection (120 V models only) or RJ45 for 10Base-T network cable; UL497A tested |
Environmental and safety | |
Operating Temperature | 0oC to 40oC (32oF to 104oF) UL tested at 25oC (77oF) |
Safety Markings | UL, cUL, and CSA; 230V models also CE and TUV |
Safety Conformance | UL 1778, CAN/CSA C22.2, No. 107.1; 230 V models also EN 50091-1-1 and IEC 60950 |
EMC Markings | FCC Class B |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Immunity | IEC 801-2, -3, -4 |
Transit/Storage Temp. | -15oC to 55oC (5oF to 131oF) |
Audible Noise | < 45 dBA typical |
Relative Humidity | 5-95% non-condensing |
The Powerware PW5115-750 UPS offers excellent backup power protection and power quality management for PCs, small-office-home-office (SOHO) equipment, NT workstations, and small internet-working devices. Delivering basic surge protection and backup power, the Powerware PW5115-750 additionally offers the best UPS power protection against five of the nine common power quality problems.
PW5115-750 Features and Benefits:
Electrical Input | |
Voltage | 120 Vac Nominal |
On Line Voltage Range | +20% for nominal voltage at full load |
Nominal Input Frequency | 45-65 Hz, 50/60 Hz; auto-sensing |
Input Protection | Reset-able circuit breaker |
Connection | 6 ft. cord w/5-I5P |
Electrical Output | |
Power Out | 1000VA / 670W |
Online Regulation | -10%, +6% of nominal voltage |
On Battery Frequency Regulation | +/-0.1 Hz of nominal frequency |
Voltage Wave Shape | Sine wave (during normal and battery operation) |
Indicators and Controls | |
Front Panel LEDs | Power on, on battery, overload, and battery fault |
Front Panel Buttons | On/Off and alarm silence/self-test |
Communications Port | DB9 female (UPS ships with communications cable); USB Interface Adapter is optional |
Power Factor | 0.67 |
Battery | |
Battery Type | Sealed, maintenance-free lead-acid; starved electrolyte |
Battery Description | (2) 12 V, 9 Ah |
Battery Recharge | < 3 hours to 90% capacity |
Battery Runtime | 5 minutes minimum; See Battery Runtimes table |
Start-On-Battery | Startup with UPS batteries in absence of utility power |
General | |
Topology | Line-interactive |
Network Transient Protector | In and out RJ11 jack for telephone/modem protection (120 V models only) or RJ45 for 10Base-T network cable; UL497A tested |
Environmental and safety | |
Operating Temperature | 0oC to 40oC (32oF to 104oF) UL tested at 25oC (77oF) |
Safety Markings | UL, cUL, and CSA; 230V models also CE and TUV |
Safety Conformance | UL 1778, CAN/CSA C22.2, No. 107.1 |
EMC Markings | FCC Class B |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Immunity | IEC 801-2, -3, -4 |
Transit/Storage Temp. | -15oC to 55oC (5oF to 131oF) |
Audible Noise | < 45 dBA typical |
Relative Humidity | 5-95% non-condensing |
The Powerware PW5115-1000 UPS offers excellent backup power protection and power quality management for PCs, small-office-home-office (SOHO) equipment, NT workstations, and small internet-working devices. Delivering basic surge protection and backup power, the Powerware PW5115-1000 additionally offers the best UPS power protection against five of the nine common power quality problems.
PW5115-1000 Features and Benefits:
Electrical Input | |
Voltage | 120Vac Nominal |
On Line Voltage Range | +20% for nominal voltage at full load |
Nominal Input Frequency | 45-65 Hz, 50/60 Hz; auto-sensing |
Input Protection | Reset-able circuit breaker |
Connection | 6 ft. cord w/5-I5P |
Electrical Output | |
Power Out | 1400VA / 950W |
Online Regulation | -10%, +6% of nominal voltage |
On Battery Voltage Regulation | +/-5% of nominal voltage; -10% after low battery warning |
On Battery Frequency Regulation | +/-0.1 Hz of nominal frequency |
Voltage Wave Shape | Sine wave (during normal and battery operation) |
Connection | (6) 5-15R |
Indicators and Controls | |
Front Panel LEDs | Power on, on battery, overload, and battery fault |
Front Panel Buttons | On/Off and alarm silence/self-test |
Communications Port | DB9 female (UPS ships with communications cable); USB Interface Adapter is optional |
Power Factor | 0.68 |
Battery | |
Battery Type | Sealed, maintenance-free lead-acid; starved electrolyte |
Battery Description | (3) 12 V, 9 Ah |
Battery Recharge | < 3 hours to 90% capacity |
Battery Runtime | 5 minutes minimum |
Start-On-Battery | Startup with UPS batteries in absence of utility power |
General | |
Topology | Line-interactive |
Dimensions | 15.1x5.9x15.4 in. (380x150x390 mm.) |
Weight | 37.0 lbs. (16.8 kg.) |
Network Transient Protector | In and out RJ11 jack for telephone/modem protection (120 V models only) or RJ45 for 10Base-T network cable; UL497A tested |
Environmental and safety | |
Operating Temperature | 0oC to 40oC (32oF to 104oF) UL tested at 25oC (77oF) |
Safety Markings | UL, cUL, and CSA; 230V models also CE and TUV |
Safety Conformance | UL 1778, CAN/CSA C22.2, No. 107.1 |
EMC Markings | FCC Class B |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Immunity | IEC 801-2, -3, -4 |
Transit/Storage Temp. | -15oC to 55oC (5oF to 131oF) |
Audible Noise | < 45 dBA typical |
Relative Humidity | 5-95% non-condensing |
The Powerware PW5115-1400 UPS offers excellent backup power protection and power quality management for PCs, small-office-home-office (SOHO) equipment, NT workstations, and small internet-working devices. Delivering basic surge protection and backup power, the Powerware PW5115-1400 additionally offers the best UPS power protection against five of the nine common power quality problems.
PW5115-1400 Features and Benefits:
The Powerware PW9125 3000U is an uninterruptible power system (UPS) which resolves utility power problems and supplies continuous, conditioned power to all connected equipment. The Powerware 9125 is a double-conversion online UPS, which means it is constantly conditioning and controlling AC output during normal operating conditions. Unlike other commercially available technologies, a double-conversion online design assures that in the event of a utility power failure, there is zero delay transferring to backup power.
]]>Electrical Input | |
Nominal Voltage | 120 V Models are 110 V or 120 V user-selectable; 230 V models are 220 V, 230 V or 240 V user-selectable |
Input voltage ranges for user-selectable voltages | +20% for nominal voltage at full load |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Over Current Protection | Electronic current limit |
Communications | |
User Interface | LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models. |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network transient Protector | UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Optional Communication cards | ConnectUPS-X Web/SNMP/xHub Card; USB card ; Relay card |
Standard Communications | 1 x RS-232 Serial Port & 1 x xUSB Port |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries |
Battery Recharge | < 3 hours to 90% capacity |
Start-On-Battery | Allows UPS operation without utility input |
General | |
Diagnostics | Self-test @ power up |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes; 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40° C (32 to 104° F) |
Safety Markings | 120 V Models: UL; cUL 230 V Models: C-Tick; CE, TUV, cUL, UL |
Safety Conformance | 120 V Models: UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) 230 V Models: UL1778, UL 497A (data line only); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950 |
EMC Markings | 120 V Models: FCC Part 15 subpart J Class A, ICES-003; 230 V Models: EN 50091-2. FCC Part 15 subpart J Class A, ICES-003 |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Audible Noise | < 40 dBA typical |
Altitude | Up to 3000M (10,000 ft) without derating |
The Powerware PW5115-500-RM Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware PW5115-500-RM Rackmount UPS additionally offers great UPS power protection against five of the nine common power quality problems.
PW5115-500-RM Features and Benefits:
Electrical Input | |
Nominal Voltage | 120 V Models are 110 V or 120 V user-selectable; 230 V models are 220 V, 230 V or 240 V user-selectable |
Input voltage ranges for user-selectable voltages | +20% for nominal voltage at full load |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Over Current Protection | Electronic current limit |
Communications | |
User Interface | LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models. |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network transient Protector | UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Optional Communication cards | ConnectUPS-X Web/SNMP/xHub Card; USB card ; Relay card |
Standard Communications | 1 x RS-232 Serial Port & 1 x xUSB Port |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries |
Battery Recharge | < 3 hours to 90% capacity |
Start-On-Battery | Allows UPS operation without utility input |
General | |
Diagnostics | Self-test @ power up |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes; 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40° C (32 to 104° F) |
Safety Markings | 120 V Models: UL; cUL 230 V Models: C-Tick; CE, TUV, cUL, UL |
Safety Conformance | 120 V Models: UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) 230 V Models: UL1778, UL 497A (data line only); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950 |
EMC Markings | 120 V Models: FCC Part 15 subpart J Class A, ICES-003; 230 V Models: EN 50091-2. FCC Part 15 subpart J Class A, ICES-003 |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Audible Noise | < 40 dBA typical |
Altitude | Up to 3000M (10,000 ft) without derating |
The Powerware PW5115-750-RM Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware PW5115-750-RM Rackmount UPS additionally offers great UPS power protection against five of the nine common power quality problems.
PW5115-750-RM Features and Benefits:
Powerware PW5115-1000-RM Specifications:
Electrical Input | |
Nominal Voltage | 120 V Models are 110 V or 120 V user-selectable; 230 V models are 220 V, 230 V or 240 V user-selectable |
Input voltage ranges for user-selectable voltages | +20% for nominal voltage at full load |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Over Current Protection | Electronic current limit |
Communications | |
User Interface | LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models. |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network transient Protector | UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Optional Communication cards | ConnectUPS-X Web/SNMP/xHub Card; USB card ; Relay card |
Standard Communications | 1 x RS-232 Serial Port & 1 x xUSB Port |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries |
Battery Recharge | < 3 hours to 90% capacity |
Start-On-Battery | Allows UPS operation without utility input |
General | |
Diagnostics | Self-test @ power up |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes; 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40° C (32 to 104° F) |
Safety Markings | 120 V Models: UL; cUL 230 V Models: C-Tick; CE, TUV, cUL, UL |
Safety Conformance | 120 V Models: UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) 230 V Models: UL1778, UL 497A (data line only); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950 |
EMC Markings | 120 V Models: FCC Part 15 subpart J Class A, ICES-003; 230 V Models: EN 50091-2. FCC Part 15 subpart J Class A, ICES-003 |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Audible Noise | < 40 dBA typical |
Altitude | Up to 3000M (10,000 ft) without derating |
The Powerware PW5115-1000-RM Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware PW5115-1000-RM Rackmount UPS additionally offers great UPS power protection against five of the nine common power quality problems.
PW5115-1000-RM Features and Benefits:
Electrical Input | |
Nominal Voltage | 120 V Models are 110 V or 120 V user-selectable; 230 V models are 220 V, 230 V or 240 V user-selectable |
Input voltage ranges for user-selectable voltages | +20% for nominal voltage at full load |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Over Current Protection | Electronic current limit |
Communications | |
User Interface | LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models. |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network transient Protector | UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Optional Communication cards | ConnectUPS-X Web/SNMP/xHub Card; USB card ; Relay card |
Standard Communications | 1 x RS-232 Serial Port & 1 x xUSB Port |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries |
Battery Recharge | < 3 hours to 90% capacity |
Start-On-Battery | Allows UPS operation without utility input |
General | |
Diagnostics | Self-test @ power up |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes; 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40° C (32 to 104° F) |
Safety Markings | 120 V Models: UL; cUL 230 V Models: C-Tick; CE, TUV, cUL, UL |
Safety Conformance | 120 V Models: UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) 230 V Models: UL1778, UL 497A (data line only); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950 |
EMC Markings | 120 V Models: FCC Part 15 subpart J Class A, ICES-003; 230 V Models: EN 50091-2. FCC Part 15 subpart J Class A, ICES-003 |
Surge Suppression | ANSI C62.41 Category A (formerly IEEE 587) |
Audible Noise | < 40 dBA typical |
Altitude | Up to 3000M (10,000 ft) without derating |
The Powerware PW5115-1500-RM Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware PW5115-1500-RM Rackmount UPS additionally offers great UPS power protection against five of the nine common power quality problems.
PW5115-1500-RM Features and Benefits:
The Powerware PW3105-500 Standby UPS is a system device that was designed to deliver the best UPS power management solution for your small office or home office. Ready to switch to UPS battery power any time it detects a power problem within the utility, the pw3105-500 UPS delivers reliable power quality and UPS backup power for wireless phones, small office PBX or key phone systems, home office workstations, small office desktop servers, small network nodes, point-of-sale systems, and computer peripheral devices.
PW3105-500 Features and Benefits:
The Powerware PW3105-700 Standby UPS is a system device that was designed to deliver the best UPS power management solution for your small office or home office. Ready to switch to UPS battery power any time it detects a power problem within the utility, the pw3105-700 UPS delivers reliable power quality and UPS backup power for wireless phones, small office PBX or key phone systems, home office workstations, small office desktop servers, small network nodes, point-of-sale systems, and computer peripheral devices.
PW3105-700 Features and Benefits:
The Powerware PW5110-500 uninterruptible power system (UPS) was designed to provide the best UPS power protection against the threats that lurk in public utilities. This line-interactive UPS system delivers the ultimate in power quality, constantly safeguarding your equipment from power outages, surges, sags, brownouts, and over-voltage conditions'while also providing varying degrees of power management for additional threats. If utility power is interrupted, even briefly, the Powerware 5110 transfers to UPS battery power.
PW5110-500 Features and Benefits:
Voltage | |
Capacity | 1000VA/600W |
Dimensions (hxwxd) | 10.6x3.4x10.2 in |
Weight | 28.0 lbs. |
Input Connection | 6’ Line cord with 90 deg.5-15P |
Output Connection | (8) 5-15R Outlets (4 Battery Backup & Surge Protection; 4 Surge Protection only) |
Operation | |
Input Voltage Range | 120Vac |
Output Voltage Range | Nominal -10% to +8% |
Frequency | 50/60 Hz auto sensing |
Lightning / Surge Protection | 320 joules |
Safety | UL 1778, Designed to meet UL497A, CAN/CSAOC22.2 No107.1/IEC 6240-1-1: CE low voltage directive |
EMI | FCC Class B |
Transfer Time to Battery/AC | 2-6 msec. typical |
Battery Type | Sealed, maintenance free lead-acid battery |
Typical Backup Time | 3-4 minutes at full rated load |
Internet / Phone / Fax Protection | RJ11/RJ45 |
Short Circuit Protection | Circuit Breaker |
Communication Port | USB |
Environmental | |
Operation Temperature | 0°C ~ 40°C |
Operation Relative Humidity | 0-95%non-condensing |
Storage Temperature | -15°C ~ 50°C |
Software | Powerware LanSafe Software is included free of charge. |
The Powerware PW5110-1000 uninterruptible power system (UPS) was designed to provide the best UPS power protection against the threats that lurk in public utilities. Th Line-interactive UPS system delivers the ultimate in power quality, constantly safeguarding your equipment from power outages, surges, sags, brownouts, and over-voltage conditions'while also providing varying degrees of power management for additional threats. If utility power is interrupted, even briefly, the Powerware 5110 transfers to UPS battery power.
PW5110-1000 Features and Benefits:
Voltage | |
Capacity | 1440VA/900W |
Dimensions (hxwxd) | 10.6x3.4x15.1 in |
Weight | 28.0 lbs. |
Input Connection | 6’ Line cord with 90 deg.5-15P |
Output Connection | (8) 5-15R Outlets (4 Battery Backup & Surge Protection; 4 Surge Protection only) |
Operation | |
Input Voltage Range | 120Vac |
Output Voltage Range | Nominal -10% to +8% |
Frequency | 50/60 Hz auto sensing |
Lightning / Surge Protection | 320 joules |
Safety | UL 1778, Designed to meet UL497A, CAN/CSAOC22.2 No107.1/IEC 6240-1-1: CE low voltage directive |
EMI | FCC Class B |
Transfer Time to Battery/AC | 2-6 msec. typical |
Battery Type | Sealed, maintenance free lead-acid battery |
Typical Backup Time | 3-4 minutes at full rated load |
Internet / Phone / Fax Protection | RJ11/RJ45 |
Short Circuit Protection | Circuit Breaker |
Communication Port | USB |
Environmental | |
Operation Temperature | 0°C ~ 40°C |
Operation Relative Humidity | 0-95%non-condensing |
Storage Temperature | -15°C ~ 50°C |
Software | Powerware LanSafe Software is included free of charge. |
The Powerware PW5110-1500 uninterruptible power system (UPS) was designed to provide the best UPS power protection against the threats that lurk in public utilities. This Line-interactive UPS system delivers the ultimate in power quality, constantly safeguarding your equipment from power outages, surges, sags, brownouts, and over-voltage conditions'while also providing varying degrees of power management for additional threats. If utility power is interrupted, even briefly, the Powerware 5110 transfers to UPS battery power.
PW5110-1500 Features and Benefits:
The Powerware PW9125 3000 GH is an uninterruptible power system (UPS) which resolves utility power problems and supplies continuous, conditioned power to all connected equipment. The Powerware 9125 is a double-conversion online UPS, which means it is constantly conditioning and controlling AC output during normal operating conditions. Unlike other commercially available technologies, a double-conversion online design assures that in the event of a utility power failure, there is zero delay transferring to backup power.
]]>Eaton 3S750 Standby UPS Specifications
Voltage | |
Capacity (VA\Watts) | 700VA / 420W |
Dimensions (H x W x D) | 3.4 x 6.7 x 13.2 in. |
Weight | 9.7 lb |
Input Connection | 6’ Line cord with 90 deg. 5-15P |
Output Connection | 10 x 5-15R Outlets (5 Battery Backup & Surge Protection; 5 Surge Protection only) |
Operation | |
Input Voltage Range | 89-151Vac |
Output Voltage Range | 102 -132 Vac |
On Battery Output Voltage | Nominal -10% to +6% |
Frequency Regulation | 0.1Hz |
Surge Protection | ANSI C62.41 Category A (formerly IEEE 587) |
Safety Conformance | UL 1778; UL497A; cUL |
EMC Markings | FCC Part 15 subpart B Class A |
Transfer Time to Battery/AC | 1-4 msec. typical |
Battery Type | Sealed, lead-acid; maintenance free |
Typical Backup Time | 2 minutes at 450W rated load 11 min @ 225W |
Internet / Phone / Fax Protection | RJ11/ RJ45 |
Communication Port | USB |
Environmental | |
Opration Temperature | 0°C ~ 40°C |
Relative Humidity | 20-93% non-condensing |
Storage Temperature | -25°C ~ 50°C |
Software | Eaton UPS Companion: Provides safe system shutdown for SOHO, small business and residential users looking for an easy way to enhance the protection capabilities of their Eaton UPS |
Liebert 3S750 UPS:
Power Rating: 750VA / 4500Watt
Input Voltage: 120V
Input Connection: NEMA 5-15P (6ft cord)
Output Receptacles: 10 x 5-15R (5 x surge protection, 5 x battery backup and surge protection)
Form Factor: Standalone or wall-mount
The sleek, savvy and sophisticated 3S750 delivers premium battery backup and surge protection for up to 10 home and office devices. EcoControl functionality provides up to 30 percent greater energy savings than typical battery backups, and plug-and-play compatibility enables automatic integration. The slim 3S fits neatly under a desk, in an entertainment center or on the wall.
Learn More:
Eaton 3S Brochure (PDF)
Eaton 3S Technical Specifications (PDF)
Mechanical | |
Height | 66 in. (1676 mm.) |
Width | 1.89 in. (48 mm.) |
Depth | 2 in. (51 mm.) |
Weight | 15 lbs. (7 kg.) |
U Height | 0U |
Mounting Style | Adjustable |
Color | Black |
Input | |
Max kVA | 5.76 |
Plug | L14-30P (2-Phase Locking 120/240VAC 30A Plug) |
Cable Length | 9 ft. (2.7 m.) |
Voltage | Split Phase 120/240 |
Current | 24A |
Phase | Split Phase (L1, L2, N, G) |
Cable Gauge | NA |
Cable Jacket | SOOW |
Frequency | 50-60 HZ |
Output | |
Outlets | (2) 5-20R (1-Phase 120VAC 20A Outlet) (24) IEC 60320 C13 (1-Phase 100-240VAC 15A Outlet) (4) IEC 60320 C19 (1-Phase 100-240VAC 20A Outlet) |
Protection & Filtering | |
Spike/Surge Suppression | None |
EMI/RFI Filter | None |
Control & Interface | |
Ports | RJ45 [2x Temperature], RJ45 [Ethernet - Web + Telnet + SNMP] |
Approvals | UL Listed |
Eaton's PDUs are now fully configurable and customizable. If you are interested in this line of PDUs, please contact us at 1-866-722-5776.
The Eaton PW105MI0U255 is a 0U, 5.76kVA, (2) 5-20R, (4) IEC 60320 C19, (24) IEC 60320 C13, L14-30P, Monitored PDU.
Eaton Monitored Network PDU Features:
Mechanical | |
Height | 66 in. (1676 mm.) |
Width | 1.89 in. (48 mm.) |
Depth | 2 in. (51 mm.) |
Weight | 15 lbs. (7 kg.) |
U Height | 0U |
Mounting Style | Adjustable |
Color | Black |
Input | |
Max kVA | 5.76 |
Plug | L21-20P (3-Phase Locking 120/208VAC 20A Plug) |
Cable Length | 9 ft. (2.7 m.) |
Voltage | 3-Phase 120/208 (WYE) |
Current | 16A |
Phase | Three Phase WYE (X, Y, Z, N, G) |
Cable Gauge | NA |
Cable Jacket | SOOW |
Frequency | 50-60 HZ |
Output | |
Outlets | (6) 5-20R (1-Phase 120VAC 20A Outlet) (24) IEC 60320 C13 (1-Phase 100-240VAC 15A Outlet) (3) IEC 60320 C19 (1-Phase 100-240VAC 20A Outlet) |
Protection & Filtering | |
Spike/Surge Suppression | None |
EMI/RFI Filter | None |
Control & Interface | |
Ports | RJ45 [2x Temperature], RJ45 [Ethernet - Web + Telnet + SNMP] |
Approvals | UL Listed |
Eaton's PDUs are now fully configurable and customizable. If you are interested in this line of PDUs, please contact us at 1-866-722-5776.
The Eaton PW306MI0U243 is a 0U, 5.76kVA, (6) 5-20R, (3) IEC 60320 C19, (24) IEC 60320 C13, L21-20P, Monitored PDU.
Eaton Monitored Network PDU Features:
Mechanical | |
Dimensions (HxWxD) | 9.45 x 6.38 x 15.79 in. (240 x 162 x 401 mm.) |
Weight | 34.3 lbs. (15.6 kg.) |
Electrical Input | |
Power Rating | 1000VA / 700W |
Nominal Voltage | 120 Vac |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Connections | |
Input Connections | 5-15P, 6 ft line cord |
Output Receptacles | (6) 5-15R |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Interface | RS-232 Single Serial Card (standard), other options available: See available Options Chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Diagnostics | Full system self-test on power up |
UPS Bypass | No Bypass, Internal Bypass |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | 480 Joules |
Audible Noise | Less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
]]>
The Powerware PW5125-1000 Line-interactive Tower UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 3.5 x 17.0 x 19.4 in. (89 x 432 x 494 mm.) |
Weight | 61 lbs. (27.67 kg.) |
Electrical Input | |
Power Rating | 1000VA / 900W |
Nominal Voltage | 120, 208 and 230 Vac |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-54 hz for 50 hz; 56-64 hz for 60 hz |
Connections | |
Input Connections | 5-15P, 6 ft line cord |
Output Receptacles | (6) 5-15R |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
Communication Ports | see Communications Slot |
Communication Slot | RS-232 single serial module (standard) options available, see options chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Electrical Power Module Replcmnt | No |
Diagnostics | Full system self-test on power up |
UPS Bypass | No Bypass |
Transfer Time | 4ms typical, 6ms max |
Overload (normal operation) | 110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | high-energy 6500 A peak |
Audible Noise | less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-1000-RM rackmount line-interactive UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 9.84 x 6.38 x 18.39 in. (250 x 162 x 467 mm.) |
Weight | 50.7 lbs. (23.0 kg.) |
Electrical Input | |
Power Rating | 1440VA / 1050W |
Nominal Voltage | 120 Vac |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Connections | |
Input Connections | 5-15P, 6 ft line cord |
Output Receptacles | (6) 5-15R |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Interface | RS-232 Single Serial Card (standard), other options available: See available Options Chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Diagnostics | Full system self-test on power up |
UPS Bypass | No Bypass, Internal Bypass |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | 480 Joules |
Audible Noise | Less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
]]>
The Powerware PW5125-1500 Line-interactive Tower UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 3.5 x 17.0 x 19.4 in. (89 x 432 x 494 mm.) |
Weight | 61 lbs. (27.67 kg.) |
Electrical Input | |
Power Rating | 1440VA / 1340W |
Nominal Voltage | 120, 208 and 230 Vac |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-54 hz for 50 hz; 56-64 hz for 60 hz |
Connections | |
Input Connections | 5-15P, 6 ft line cord |
Output Receptacles | (6) 5-15R |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
Communication Ports | see Communications Slot |
Communication Slot | RS-232 single serial module (standard) options available, see options chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Electrical Power Module Replcmnt | No |
Diagnostics | Full system self-test on power up |
UPS Bypass | No Bypass |
Transfer Time | 4ms typical, 6ms max |
Overload (normal operation) | 110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | high-energy 6500 A peak |
Audible Noise | less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-1500-RM rackmount line-interactive UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 9.84 x 8.07 x 19.41 in. (250 x 205 x 493 mm.) |
Weight | 68.3 lbs. (31.0 kg.) |
Electrical Input | |
Power Rating | 1920VA / 1600W |
Nominal Voltage | 120 Vac |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Connections | |
Input Connections | 5-20P, 6 ft line cord |
Output Receptacles | (6) 5-15R, (2) 5-20R |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Interface | RS-232 Single Serial Card (standard), other options available: See available Options Chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Diagnostics | Full system self-test on power up |
UPS Bypass | No Bypass, Internal Bypass |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | 480 Joules |
Audible Noise | Less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-2200 Line-interactive Tower UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 9.84 x 8.07 x 19.41 in. (250 x 205 x 493 mm.) |
Weight | 68.3 lbs. (31.0 kg.) |
Electrical Input | |
Power Rating | 2080VA / 1600W |
Nominal Voltage | 208 Vac |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-65 Hz |
Connections | |
Input Connections | IEC-320-15A, inlet (Includes (2) each IEC interconnect cables.) |
Output Receptacles | (9) IEC-320-10A (C13) |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
X-Slot Interface | RS-232 Single Serial Card (standard), other options available: See available Options Chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Diagnostics | Full system self-test on power up |
UPS Bypass | No Bypass, Internal Bypass |
Transfer Time | 2-4ms typical |
Overload (normal operation) | 110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | 480 Joules |
Audible Noise | Less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-2200b Line-interactive Tower UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 3.5 x 19.0 x 24.5 in. (89 x 482.6 x 622.3 mm.) |
Weight | 89 lbs. (40.40 kg.) |
Electrical Input | |
Power Rating | 2400VA / 2250W |
Nominal Voltage | 120, 208 and 230 Vac2 |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-54 hz for 50 hz; 56-64 hz for 60 hz |
Connections | |
Input Connections | L5-30P, (12' attached) |
Output Receptacles | (1) L5-30R, (6) 5-15R |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
Communication Ports | see Communications Slot |
Communication Slot | RS-232 single serial module (standard) options available, see options chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Electrical Power Module Replacement | Yes, hot-swap |
Diagnostics | Full system self-test on power up |
UPS Bypass | Internal Bypass |
Transfer Time | 4ms typical, 6ms max |
Overload (normal operation) | 100-102 % indefinite |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | high-energy 6500 A peak |
Audible Noise | less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-2400-RM rackmount line-interactive UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 3.5 x 19.0 x 24.5 in. (89 x 482.6 x 622.3 mm.) |
Weight | 89 lbs. (40.40 kg.) |
Electrical Input | |
Power Rating | 2880VA / 2700W |
Nominal Voltage | 120, 208 and 230 Vac2 |
Input Voltage Ranges (for user-selectable voltages) | Low voltage: 77-152 V; High voltage: 154-288 V |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-54 hz for 50 hz; 56-64 hz for 60 hz |
Connections | |
Input Connections | L5-30P, (12' attached) |
Output Receptacles | (1) L5-30R, (6) 5-15R |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection) |
Communication Ports | see Communications Slot |
Communication Slot | RS-232 single serial module (standard) options available, see options chart |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Electrical Power Module Replacement | Yes, hot-swap |
Diagnostics | Full system self-test on power up |
UPS Bypass | Internal Bypass |
Transfer Time | 4ms typical, 6ms max |
Overload (normal operation) | 100-102 % indefinite |
Environmental | |
Operating Temperature | 0 to 40º C (32 to 104º F) |
Storage Temperature | -15 to 50º C (5 to 122º F) |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | high-energy 6500 A peak |
Audible Noise | less than 40 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-3000-RM rackmount line-interactive UPS delivers cost-effective power protection for PCs, workstations, and servers.
Mechanical | |
Dimensions (HxWxD) | 5.25 x 17.50 x 26.0 in. (133 x 445 x 661 mm.) |
Weight | 161 lbs. (73 kg.) |
Electrical Input | |
Power Rating | 5000VA / 4500W |
Nominal Voltage | 200/208, 220, 230 and 240 Vac2 |
Input Voltage Ranges (for user-selectable voltages) | 160-288 |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-54 hz for 50 hz; 56-64 hz for 60 hz |
Connections | |
Input Connections | (1) NEMA L6-30P |
Output Receptacles | IEC-320-C13(X 4) , NEMA L6-20R(X 2) , NEMA L6-30R(X 1) |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | No |
Communication Ports | Native USB and serial port |
Communication Slot | Web/SNMPxHub card factory installed; other options also available |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Electrical Power Module Replcmnt | yes, hot-swap |
Diagnostics | full system self-test on power up |
UPS Bypass | Internal Bypass |
Transfer Time | 4ms typical, 6ms max |
Overload (normal operation) | 110% overload for 30 seconds short circuit protected |
Environmental | |
Operating Temperature | 10°C to 40°C |
Storage Temperature | -25°C to 55°C |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | high-energy 6500 A peak |
Audible Noise | less than 45 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-5000 delivers a space-saving 3U rack height package and is the ideal high-density power protection solution for your servers, storage systems, network equipment and other critical devices. UPS Models ship with both black and beige front panels.
]]>Mechanical | |
Dimensions (HxWxD) | 5.25 x 17.50 x 26.0 in. (133 x 445 x 661 mm.) |
Weight | 161 lbs. (73 kg.) |
Electrical Input | |
Power Rating | 6000VA / 5400W |
Nominal Voltage | 200/208, 220, 230 and 240 Vac2 |
Input Voltage Ranges (for user-selectable voltages) | 160-288 |
Operating Frequency | 50/60 Hz, Auto-sensing |
Frequency Range | 46-54 hz for 50 hz; 56-64 hz for 60 hz |
Connections | |
Input Connections | Hardwired |
Output Receptacles | Hardwired, (4) C19, (4) C13 |
Battery | |
Battery Type | Sealed, lead-acid; maintenance free |
Battery Replacement | Hot-swappable internal batteries and external batteries modules |
Recharge Time | <3 hours to 90% usable capacity |
Start-On-Battery | Allows start of UPS without utility input |
Electrical Output | |
On Utility Voltage Regulation | -10% to +6% of nominal |
On Battery Voltage Regulation | ±5% RMS |
Voltage Wave Shape (on battery) | Sine Wave |
Output Protection | Short circuit protection |
Communications | |
User Interface | Front Control Panel |
Audible Alarms | For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault |
Network Transient Protector | No |
Communication Ports | Native USB and serial port |
Communication Slot | Web/SNMPxHub card factory installed; other options also available |
Cable | 6-foot communications cable included |
Power Management Software | Powerware Software Suite CD-ROM (bundled with UPS) |
General | |
Electrical Power Module Replcmnt | yes, hot-swap |
Diagnostics | full system self-test on power up |
UPS Bypass | Internal Bypass |
Transfer Time | 4ms typical, 6ms max |
Overload (normal operation) | 110% overload for 30 seconds short circuit protected |
Environmental | |
Operating Temperature | 10°C to 40°C |
Storage Temperature | -25°C to 55°C |
Relative Humidity | 0% to 95% non-condensing |
Lightning & Surge Protection | ANSI/IEEE C62.41 (IEEE 587), IEC61000-4-5 |
Surge Energy Rating | high-energy 6500 A peak |
Audible Noise | less than 45 dBA typical |
Altitude | 3000m (10,000 ft) without derating |
The Powerware PW5125-6000-HW Line-interactive UPS delivers a space-saving 3U rack height package and is the ideal high-density power protection solution for your servers, storage systems, network equipment and other critical devices. UPS Models ship with both black and beige front panels.
Eaton 5130 UPS with tower pedestals
Package Includes:
Eaton PW5130L1000-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.64 cm.) |
Width | 17.4 in. (44.2 cm.) |
Depth | 20 in. (51 cm.) |
Weight | 53.6 lbs. (24.3 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 218, Bat: 1,462 |
Audible Noise | Max 45 dBA |
Operating Temperature | 0˚C (32˚F) to +40˚C (104˚F) |
Storage Temperature | -15˚C (5˚F) to +50˚C (122˚F) |
Relative Humidity | 20–95% non-condensing |
Altitude | Up to 10,000 ft (3000M) without de-rating |
Electrical Input | |
Connection | 5-15P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 80-151V (* The high and low thresholds can be user adjusted using the downloadable UPS Configuration tool) |
Nominal Voltage | 120 VAC |
Frequency | 50/60 Hz (auto-sensing) |
Frequency Range | 47–70 Hz for 50 Hz operation 56.5–70 Hz for 60 Hz operation |
Nominal Current | 8.33 |
Breaker Ratings | 15A |
Electrical Output | |
Output Receptacles | (6) 5-15R |
On Utility Voltage Regulation | 102-132 Vac |
On Battery Voltage Regulation | -10%, +6% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Efficiency (on Battery) | 0.7 |
Frequency Regulation | 0.1 Hz |
Transfer Time | 1 to 4 ms, typical |
Load Crest Factor | 3:1 |
Load Segments | Two individually controlled output receptacles |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 12V/7.2 Ah; sealed, lead-acid; maintenance free |
Half Load Runtime (in mins) | 15 |
Full Load Runtime (in mins) | 5 |
Battery Replacement | Hot-swappable internal batteries |
Battery Voltage | 12V |
Start On Battery | Allows start of UPS without utility input |
Communications | |
LEDs | 13 status-indicating LEDs |
Communication Ports | Serial Port RS-232 (RJ45) ports; USB Port As standard (HID). RS-232 and USB 6-ft communication cables included |
Optional Communication Cards | ConnectUPS-MS network management card and ModBus |
Power Management Software | Eaton Software Suite CD-ROM (bundled with UPS) |
General | |
Topology | Line interactive |
Color | Black |
Rating (VA/Watts) | 1000/1000 |
Diagnostics | Full system self-test at power up |
Efficiency | >94% |
Rail Kit Included | Towers stands and 4-post rail kit included with all units |
Warranty | Three-year factory warranty with online product registration |
Remote Emergency Power off (REPO) | Rear deck emergency stop connector (for remote on/off and power off) |
Standards | |
Safety markings | UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) |
EMC Markings | FCC Part 15 subpart B Class A |
Markings | UL; cUL |
The Eaton Powerware PW5130L1000-XL2U is a 2U, 120V, 50/60 Hz rack mount Line-Interactive UPS.
The Eaton 5130 Rack/Tower UPS provides line-interactive backup power and scalable runtimes for servers, storage systems, VoIP gear and network equipment. With a two-in-one rack/tower form factor, the 5130 UPS packs up to three kVA of power into only 2U of rack space. The 5130 UPS provides additional battery runtime with 2U extended battery modules. To enhance compatibility with modern IT loads, the 5130 UPS is designed with a 0.9 power factor.
]]>
Eaton 5130 UPS with tower pedestals
Package Includes:
Eaton PW5130L1500-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.64 cm.) |
Width | 17.4 in. (44.2 cm.) |
Depth | 20 in. (51 cm.) |
Weight | 58.6 lbs. (26.6 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 305, Bat: 2,047 |
Audible Noise | Max 45 dBA |
Operating Temperature | 0˚C (32˚F) to +35°C (95˚F) |
Storage Temperature | -15˚C (5˚F) to +50˚C (122˚F) |
Relative Humidity | 20–95% non-condensing |
Altitude | Up to 10,000 ft (3000M) without de-rating |
Electrical Input | |
Connection | 5-15P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 80-151V (* The high and low thresholds can be user adjusted using the downloadable UPS Configuration tool) |
Nominal Voltage | 120 VAC |
Frequency | 50/60 Hz (auto-sensing) |
Frequency Range | 47–70 Hz for 50 Hz operation 56.5–70 Hz for 60 Hz operation |
Nominal Current | 12.5 |
Breaker Ratings | 15A |
Electrical Output | |
Output Receptacles | (6) 5-20R |
On Utility Voltage Regulation | 102-132 Vac |
On Battery Voltage Regulation | -10%, +6% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Efficiency (on Battery) | 0.7 |
Frequency Regulation | 0.1 Hz |
Transfer Time | 1 to 4 ms, typical |
Load Crest Factor | 3:1 |
Load Segments | Two individually controlled output receptacles |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 12V/9 Ah; sealed, lead-acid; maintenance free |
Half Load Runtime (in mins) | 9 |
Full Load Runtime (in mins) | 3 |
Battery Replacement | Hot-swappable internal batteries |
Battery Voltage | 12V |
Start On Battery | Allows start of UPS without utility input |
Communications | |
LEDs | 13 status-indicating LEDs |
Communication Ports | Serial Port RS-232 (RJ45) ports; USB Port As standard (HID). RS-232 and USB 6-ft communication cables included |
Optional Communication Cards | ConnectUPS-MS network management card and ModBus |
Power Management Software | Eaton Software Suite CD-ROM (bundled with UPS) |
General | |
Topology | Line interactive |
Color | Black |
Rating (VA/Watts) | 1500/1400 |
Diagnostics | Full system self-test at power up |
Efficiency | >94% |
Rail Kit Included | Towers stands and 4-post rail kit included with all units |
Warranty | Three-year factory warranty with online product registration |
Remote Emergency Power off (REPO) | Rear deck emergency stop connector (for remote on/off and power off) |
Standards | |
Safety markings | UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) |
EMC Markings | FCC Part 15 subpart B Class A |
Markings | UL; cUL |
The Eaton Powerware PW5130L1500-XL2U is a 2U, 120V, 1500VA / 1400W, 50/60 Hz, (6) 5-15R outlet Line-Interactive rack mount UPS.
The Eaton 5130 Rack/Tower UPS provides line-interactive backup power and scalable runtimes for servers, storage systems, VoIP gear and network equipment. With a two-in-one rack/tower form factor, the 5130 UPS packs up to three kVA of power into only 2U of rack space. The 5130 UPS provides additional battery runtime with 2U extended battery modules. To enhance compatibility with modern IT loads, the 5130 UPS is designed with a 0.9 power factor.
]]>
Eaton 5130 UPS with tower pedestals
Package Includes:
Eaton PW5130L2200-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.64 cm.) |
Width | 17.4 in. (44.2 cm.) |
Depth | 25 in. (64 cm.) |
Weight | 74.5 lbs. (33.8 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 418, Bat: 2,184 |
Audible Noise | Max 45 dBA |
Operating Temperature | 0˚C (32˚F) to +35°C (95˚F) |
Storage Temperature | -15˚C (5˚F) to +50˚C (122˚F) |
Relative Humidity | 20–95% non-condensing |
Altitude | Up to 10,000 ft (3000M) without de-rating |
Electrical Input | |
Connection | 5-20P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 80-151V (* The high and low thresholds can be user adjusted using the downloadable UPS Configuration tool) |
Nominal Voltage | 120 VAC |
Frequency | 50/60 Hz (auto-sensing) |
Frequency Range | 47–70 Hz for 50 Hz operation 56.5–70 Hz for 60 Hz operation |
Nominal Current | 16.25 |
Breaker Ratings | 30A |
Electrical Output | |
Output Receptacles | (8) 5-20R |
On Utility Voltage Regulation | 102-132 Vac |
On Battery Voltage Regulation | -10%, +6% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Efficiency (on Battery) | 0.75 |
Frequency Regulation | 0.1 Hz |
Transfer Time | 1 to 4 ms, typical |
Load Crest Factor | 3:1 |
Load Segments | Two individually controlled output receptacles |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 12V/7.2 Ah; sealed, lead-acid; maintenance free |
Half Load Runtime (in mins) | 11 |
Full Load Runtime (in mins) | 3 |
Battery Replacement | Hot-swappable internal batteries |
Battery Voltage | 12V |
Start On Battery | Allows start of UPS without utility input |
Communications | |
LEDs | 13 status-indicating LEDs |
Communication Ports | Serial Port RS-232 (RJ45) ports; USB Port As standard (HID). RS-232 and USB 6-ft communication cables included |
Optional Communication Cards | ConnectUPS-MS network management card and ModBus |
Power Management Software | Eaton Software Suite CD-ROM (bundled with UPS) |
General | |
Topology | Line interactive |
Color | Black |
Rating (VA/Watts) | 2200/1920 |
Diagnostics | Full system self-test at power up |
Efficiency | >94% |
Rail Kit Included | Towers stands and 4-post rail kit included with all units |
Warranty | Three-year factory warranty with online product registration |
Remote Emergency Power off (REPO) | Rear deck emergency stop connector (for remote on/off and power off) |
Standards | |
Safety markings | UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) |
EMC Markings | FCC Part 15 subpart B Class A |
Markings | UL; cUL |
The Eaton Powerware PW5130L2200-XL2U is a 2U, 120V, 2200VA / 1920W, 50/60 Hz, (8) 5-20R outlet Line-Interactive rack mount UPS.
The Eaton 5130 Rack/Tower UPS provides line-interactive backup power and scalable runtimes for servers, storage systems, VoIP gear and network equipment. With a two-in-one rack/tower form factor, the 5130 UPS packs up to three kVA of power into only 2U of rack space. The 5130 UPS provides additional battery runtime with 2U extended battery modules. To enhance compatibility with modern IT loads, the 5130 UPS is designed with a 0.9 power factor.
]]>
Eaton 5130 UPS with tower pedestals
Package Includes:
Eaton PW5130L3000-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.64 cm.) |
Width | 17.4 in. (44.2 cm.) |
Depth | 25 in. (64 cm.) |
Weight | 74.5 lbs. (33.8 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 588, Bat: 3,071 |
Audible Noise | Max 45 dBA |
Operating Temperature | 0˚C (32˚F) to +35°C (95˚F) |
Storage Temperature | -15˚C (5˚F) to +50˚C (122˚F) |
Relative Humidity | 20–95% non-condensing |
Altitude | Up to 10,000 ft (3000M) without de-rating |
Electrical Input | |
Connection | L5-30P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 80-151V (* The high and low thresholds can be user adjusted using the downloadable UPS Configuration tool) |
Nominal Voltage | 120 VAC |
Frequency | 50/60 Hz (auto-sensing) |
Frequency Range | 47–70 Hz for 50 Hz operation 56.5–70 Hz for 60 Hz operation |
Nominal Current | 25.4 A |
Breaker Ratings | 30A |
Electrical Output | |
Output Receptacles | (6) 5-20R, (1) L5-30R |
On Utility Voltage Regulation | 102-132 Vac |
On Battery Voltage Regulation | -10%, +6% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Efficiency (on Battery) | 0.75 |
Frequency Regulation | 0.1 Hz |
Transfer Time | 1 to 4 ms, typical |
Load Crest Factor | 3:1 |
Load Segments | Two individually controlled output receptacles |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 12V/9 Ah; sealed, lead-acid; maintenance free |
Half Load Runtime (in mins) | 10 |
Full Load Runtime (in mins) | 3 |
Battery Replacement | Hot-swappable internal batteries |
Battery Voltage | 12V |
Start On Battery | Allows start of UPS without utility input |
Communications | |
LEDs | 13 status-indicating LEDs |
Communication Ports | Serial Port RS-232 (RJ45) ports; USB Port As standard (HID). RS-232 and USB 6-ft communication cables included |
Optional Communication Cards | ConnectUPS-MS network management card and ModBus |
Power Management Software | Eaton Software Suite CD-ROM (bundled with UPS) |
General | |
Topology | Line interactive |
Color | Black |
Rating (VA/Watts) | 2880/2700 |
Diagnostics | Full system self-test at power up |
Efficiency | >94% |
Rail Kit Included | Towers stands and 4-post rail kit included with all units |
Warranty | Three-year factory warranty with online product registration |
Remote Emergency Power off (REPO) | Rear deck emergency stop connector (for remote on/off and power off) |
Standards | |
Safety markings | UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) |
EMC Markings | FCC Part 15 subpart B Class A |
Markings | UL; cUL |
The Eaton Powerware PW5130L3000-XL2U is a 2U, 120V, 2880VA / 2700W, 50/60 Hz, (6) 5-20R, (1) L5-30R outlet Line-Interactive rack mount UPS.
The Eaton 5130 Rack/Tower UPS provides line-interactive backup power and scalable runtimes for servers, storage systems, VoIP gear and network equipment. With a two-in-one rack/tower form factor, the 5130 UPS packs up to three kVA of power into only 2U of rack space. The 5130 UPS provides additional battery runtime with 2U extended battery modules. To enhance compatibility with modern IT loads, the 5130 UPS is designed with a 0.9 power factor.
]]>Eaton 5130 Series Features:
Eaton 5130 UPS with tower pedestals
Package Includes:
Eaton PW5130L3000-XL2U Specifications:
Mechanical | |
Height | 5.1 in. (13.0 cm.) |
Width | 17.4 in. (44.2 cm.) |
Depth | 19.1 in. (48.5 cm.) |
Weight | 75.6 lbs. (34.3 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 588, Bat: 3,071 |
Audible Noise | Max 45 dBA |
Operating Temperature | 0˚C (32˚F) to +35°C (95˚F) |
Storage Temperature | -15˚C (5˚F) to +50˚C (122˚F) |
Relative Humidity | 20–95% non-condensing |
Altitude | Up to 10,000 ft (3000M) without de-rating |
Electrical Input | |
Connection | L5-30P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 80-151V (* The high and low thresholds can be user adjusted using the downloadable UPS Configuration tool) |
Nominal Voltage | 120 VAC |
Frequency | 50/60 Hz (auto-sensing) |
Frequency Range | 47–70 Hz for 50 Hz operation 56.5–70 Hz for 60 Hz operation |
Nominal Current | 25.4 A |
Breaker Ratings | 30A |
Electrical Output | |
Output Receptacles | (6) 5-20R, (1) L5-30R |
On Utility Voltage Regulation | 102-132 Vac |
On Battery Voltage Regulation | -10%, +6% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Efficiency (on Battery) | 0.75 |
Frequency Regulation | 0.1 Hz |
Transfer Time | 1 to 4 ms, typical |
Load Crest Factor | 3:1 |
Load Segments | Two individually controlled output receptacles |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 12V/9 Ah; sealed, lead-acid; maintenance free |
Half Load Runtime (in mins) | 10 |
Full Load Runtime (in mins) | 3 |
Battery Replacement | Hot-swappable internal batteries |
Battery Voltage | 12V |
Start On Battery | Allows start of UPS without utility input |
Communications | |
LEDs | 13 status-indicating LEDs |
Communication Ports | Serial Port RS-232 (RJ45) ports; USB Port As standard (HID). RS-232 and USB 6-ft communication cables included |
Optional Communication Cards | ConnectUPS-MS network management card and ModBus |
Power Management Software | Eaton Software Suite CD-ROM (bundled with UPS) |
General | |
Topology | Line interactive |
Color | Black |
Rating (VA/Watts) | 2880/2700 |
Diagnostics | Full system self-test at power up |
Efficiency | >94% |
Rail Kit Included | Towers stands and 4-post rail kit included with all units |
Warranty | Three-year factory warranty with online product registration |
Remote Emergency Power off (REPO) | Rear deck emergency stop connector (for remote on/off and power off) |
Standards | |
Safety markings | UL 1778; UL497A; cUL (CAN/CSA C22.2, No. 107.1) |
EMC Markings | FCC Part 15 subpart B Class A |
Markings | UL; cUL |
The Eaton Powerware PW5130L3000-XL3U is a 3U, 120V, 2880VA / 2700W, 50/60 Hz, (6) 5-20R, (1) L5-30R outlet Line-Interactive rack mount UPS.
The Eaton 5130 Rack/Tower UPS provides line-interactive backup power and scalable runtimes for servers, storage systems, VoIP gear and network equipment. With a two-in-one rack/tower form factor, the 5130 UPS packs up to three kVA of power into only 3U of rack space. The 5130 UPS provides additional battery runtime with 3U extended battery modules. To enhance compatibility with modern IT loads, the 5130 UPS is designed with a 0.9 power factor.
]]>
Eaton 9130 UPS mounting in server rack
Package Includes:
Eaton PW9130L1000R-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.6 cm.) |
Width | 17.2 in. (43.7 cm.) |
Depth | 17.7 in. (45.0 cm.) |
Weight | 35.3 lbs. (16.0 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 500, Bat: 674 |
Audible Noise | <50 dB |
Operating Temperature | -20˚C (-4˚F) to +40˚C (104˚F) with batteries and -25˚C (-13˚F) to +55˚C (131 ˚F) without batteries |
Storage Temperature | -20°C (-4°F) to +40°C (104°F) with batteries and -25°C (-13°F) to +55°C (131 °F) without batteries |
Relative Humidity | 5–90% non-condensing |
Electrical Input | |
Connection | 5-15P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 90-138 Vac |
Nominal Voltage | 120V |
Frequency | 50/60 Hz |
Frequency Range | 45–65 Hz |
Nominal Current | 5.8 A |
Breaker Ratings | 15A |
Generator Compatability | Yes |
Electrical Output | |
Output Receptacles | (6) 5-15R |
On Utility Voltage Regulation | ±3% of nominal |
On Battery Voltage Regulation | ±3% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Frequency Regulation | ±3% Hz online |
Load Crest Factor | 3 to 1 |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 36 Vdc; (3) 12V, 9 Ah |
Half Load Runtime (in mins) | 24 |
Full Load Runtime (in mins) | 10 |
Battery Replacement | Hot-swappable internal and external batteries |
Start On Battery | Allows start of UPS without utility input |
Recharge Time | Internal batteries: 3 hours. 1 EBM: 9 hours; 2 EBM: 15 hours; 3 EBM: 21 hours; 4 EBM: 27 hours |
Communications | |
User Interface | Graphical LCD with blue backlight and text in English, French, German, Russian and Spanish |
LEDs | Four status-indicating LEDs |
Communication Ports | (1) USB, (1) RS-232 serial, Relay output (common alarm standard) |
Communications Slot | Optional communication slots (BD Slot) |
Optional Communication Cards | SNMP/Web card for direct control and monitoring in SNMP-based networks, monitoring of UPS status and meters through Web browser interface Relay card for integration to industrial environment and building management systems, remote shutdown for IBM AS/400 systems |
Power Management Software | Bundled software suite CD |
General | |
Topology | Online, double-conversion |
Configuration | Rackmount |
Color | Black |
Rating (VA/Watts) | 1000/900 |
Diagnostics | Full system self-test |
Efficiency | >95% in high-efficiency mode; >86% in online mode |
UPS Bypass | Automatic bypass |
Rail Kit Included | Included with all rackmount units |
Warranty | Two-year factory warranty |
Remote Emergency Power off (REPO) | Emergency shutdown control through the REPO port |
Standards | |
Safety markings | UL, cUL, VCCI |
EMC Markings | FCC Class B, EN55022 Class B |
RoHS Compliance | Yes |
The Eaton Powerware PW9130L1000R-XL2U is a 2U, 120V, 1000VA / 900W, 50/60 Hz, (6) 5-15R outlet, Online, double-conversion rack mount UPS.
The Eaton 9130 Rackmount UPS delivers online power quality and scalable battery runtimes for rack servers, voice and data networks, storage systems and other IT equipment. With an efficiency rating of >95%, the 9130 UPS cuts energy costs while packing up to three kVA of power into only 2U of rack space. The 9130 UPS significantly extends battery service life with ABM technology and also has a bright LCD user interface to simplify monitoring.
Eaton's UPSs are now fully configurable and customizable. If you are interested in customizing this line of UPSs, please Contact Us.
]]>
Eaton 9130 UPS mounting in server rack
Package Includes:
Eaton PW9130L1000R-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.6 cm.) |
Width | 17.2 in. (43.7 cm.) |
Depth | 17.7 in. (45.0 cm.) |
Weight | 43 lbs. (20 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 750, Bat: 1011 |
Audible Noise | <50 dB |
Operating Temperature | -20˚C (-4˚F) to +40˚C (104˚F) with batteries and -25˚C (-13˚F) to +55˚C (131 ˚F) without batteries |
Storage Temperature | -20°C (-4°F) to +40°C (104°F) with batteries and -25°C (-13°F) to +55°C (131 °F) without batteries |
Relative Humidity | 5–90% non-condensing |
Electrical Input | |
Connection | 5-15P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 90-138 Vac |
Nominal Voltage | 120V |
Frequency | 50/60 Hz |
Frequency Range | 45–65 Hz |
Nominal Current | 12.5 A |
Breaker Ratings | 15A |
Generator Compatability | Yes |
Electrical Output | |
Output Receptacles | (6) 5-15R |
On Utility Voltage Regulation | ±3% of nominal |
On Battery Voltage Regulation | ±3% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Frequency Regulation | ±3% Hz online |
Load Crest Factor | 3 to 1 |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 48 Vdc; (4) 12V, 9 Ah |
Half Load Runtime (in mins) | 18 |
Full Load Runtime (in mins) | 7 |
Battery Replacement | Hot-swappable internal and external batteries |
Start On Battery | Allows start of UPS without utility input |
Recharge Time | Internal batteries: 3 hours. 1 EBM: 9 hours; 2 EBM: 15 hours; 3 EBM: 21 hours; 4 EBM: 27 hours |
Communications | |
User Interface | Graphical LCD with blue backlight and text in English, French, German, Russian and Spanish |
LEDs | Four status-indicating LEDs |
Communication Ports | (1) USB, (1) RS-232 serial, Relay output (common alarm standard) |
Communications Slot | Optional communication slots (BD Slot) |
Optional Communication Cards | SNMP/Web card for direct control and monitoring in SNMP-based networks, monitoring of UPS status and meters through Web browser interface Relay card for integration to industrial environment and building management systems, remote shutdown for IBM AS/400 systems |
Power Management Software | Bundled software suite CD |
General | |
Topology | Online, double-conversion |
Configuration | Rackmount |
Color | Black |
Rating (VA/Watts) | 1500/1350 |
Diagnostics | Full system self-test |
Efficiency | >95% in high-efficiency mode; >86% in online mode |
UPS Bypass | Automatic bypass |
Rail Kit Included | Included with all rackmount units |
Warranty | Two-year factory warranty |
Remote Emergency Power off (REPO) | Emergency shutdown control through the REPO port |
Standards | |
Safety markings | UL, cUL, VCCI |
EMC Markings | FCC Class B, EN55022 Class B |
RoHS Compliance | Yes |
The Eaton Powerware PW9130L1500R-XL2U is a 2U, 120V, 1500VA / 1350W, 50/60 Hz, (6) 5-15R outlet, Online, double-conversion rack mount UPS.
The Eaton 9130 Rackmount UPS delivers online power quality and scalable battery runtimes for rack servers, voice and data networks, storage systems and other IT equipment. With an efficiency rating of >95%, the 9130 UPS cuts energy costs while packing up to three kVA of power into only 2U of rack space. The 9130 UPS significantly extends battery service life with ABM technology and also has a bright LCD user interface to simplify monitoring.
Eaton's UPSs are now fully configurable and customizable. If you are interested in customizing this line of UPSs, please Contact Us.
]]>
Eaton 9130 UPS mounting in server rack
Package Includes:
Eaton PW9130L2000R-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.6 cm.) |
Width | 17.2 in. (43.7 cm.) |
Depth | 23.6 in. (59.9 cm.) |
Weight | 63.9 lbs. (29.0 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 838, Bat: 1348 |
Audible Noise | <50 dB |
Operating Temperature | -20˚C (-4˚F) to +40˚C (104˚F) with batteries and -25˚C (-13˚F) to +55˚C (131 ˚F) without batteries |
Storage Temperature | -20°C (-4°F) to +40°C (104°F) with batteries and -25°C (-13°F) to +55°C (131 °F) without batteries |
Relative Humidity | 5–90% non-condensing |
Electrical Input | |
Connection | 5-20P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 90-138 Vac |
Nominal Voltage | 120V |
Frequency | 50/60 Hz |
Frequency Range | 45–65 Hz |
Nominal Current | 16.7 A |
Breaker Ratings | 20A |
Generator Compatability | Yes |
Electrical Output | |
Output Receptacles | (6) 5-20R, (1) L5-20R |
On Utility Voltage Regulation | ±3% of nominal |
On Battery Voltage Regulation | ±3% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Frequency Regulation | ±3% Hz online |
Load Crest Factor | 3 to 1 |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 72 Vdc; (6) 12V, 9 Ah |
Half Load Runtime (in mins) | 26 |
Full Load Runtime (in mins) | 9 |
Battery Replacement | Hot-swappable internal and external batteries |
Start On Battery | Allows start of UPS without utility input |
Recharge Time | Internal batteries: 3 hours. 1 EBM: 9 hours; 2 EBM: 15 hours; 3 EBM: 21 hours; 4 EBM: 27 hours |
Communications | |
User Interface | Graphical LCD with blue backlight and text in English, French, German, Russian and Spanish |
LEDs | Four status-indicating LEDs |
Communication Ports | (1) USB, (1) RS-232 serial, Relay output (common alarm standard) |
Communications Slot | Optional communication slots (BD Slot) |
Optional Communication Cards | SNMP/Web card for direct control and monitoring in SNMP-based networks, monitoring of UPS status and meters through Web browser interface Relay card for integration to industrial environment and building management systems, remote shutdown for IBM AS/400 systems |
Power Management Software | Bundled software suite CD |
General | |
Topology | Online, double-conversion |
Configuration | Rackmount |
Color | Black |
Rating (VA/Watts) | 2000/1800 |
Diagnostics | Full system self-test |
Efficiency | >95% in high-efficiency mode; >86% in online mode |
UPS Bypass | Automatic bypass |
Rail Kit Included | Included with all rackmount units |
Warranty | Two-year factory warranty |
Remote Emergency Power off (REPO) | Emergency shutdown control through the REPO port |
Standards | |
Safety markings | UL, cUL, VCCI |
EMC Markings | FCC Class A, EN55022 Class A |
RoHS Compliance | Yes |
The Eaton Powerware PW9130L2000R-XL2U is a 2U, 120V, 2000VA / 1800W, 50/60 Hz, (6) 5-20R, (1) L5-20R outlet, Online, double-conversion rack mount UPS.
The Eaton 9130 Rackmount UPS delivers online power quality and scalable battery runtimes for rack servers, voice and data networks, storage systems and other IT equipment. With an efficiency rating of >95%, the 9130 UPS cuts energy costs while packing up to three kVA of power into only 2U of rack space. The 9130 UPS significantly extends battery service life with ABM technology and also has a bright LCD user interface to simplify monitoring.
Eaton's UPSs are now fully configurable and customizable. If you are interested in customizing this line of UPSs, please Contact Us.
]]>
Eaton 9130 UPS mounting in server rack
Package Includes:
Eaton PW9130L2500R-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.6 cm.) |
Width | 17.2 in. (43.7 cm.) |
Depth | 23.6 in. (59.9 cm.) |
Weight | 65 lbs. (29 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 1047, Bat: 1463 |
Audible Noise | <50 dB |
Operating Temperature | -20˚C (-4˚F) to +40˚C (104˚F) with batteries and -25˚C (-13˚F) to +55˚C (131 ˚F) without batteries |
Storage Temperature | -20°C (-4°F) to +40°C (104°F) with batteries and -25°C (-13°F) to +55°C (131 °F) without batteries |
Relative Humidity | 5–90% non-condensing |
Electrical Input | |
Connection | L5-30P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 90-138 Vac |
Nominal Voltage | 120V |
Frequency | 50/60 Hz |
Frequency Range | 45–65 Hz |
Nominal Current | 20.8 A |
Breaker Ratings | 30A |
Generator Compatability | Yes |
Electrical Output | |
Output Receptacles | (6) 5-20R, (1) L5-30R |
On Utility Voltage Regulation | ±3% of nominal |
On Battery Voltage Regulation | ±3% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Frequency Regulation | ±3% Hz online |
Load Crest Factor | 3 to 1 |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 72 Vdc; (6) 12V, 9 Ah |
Half Load Runtime (in mins) | 17 |
Full Load Runtime (in mins) | 7 |
Battery Replacement | Hot-swappable internal and external batteries |
Start On Battery | Allows start of UPS without utility input |
Recharge Time | Internal batteries: 3 hours. 1 EBM: 9 hours; 2 EBM: 15 hours; 3 EBM: 21 hours; 4 EBM: 27 hours |
Communications | |
User Interface | Graphical LCD with blue backlight and text in English, French, German, Russian and Spanish |
LEDs | Four status-indicating LEDs |
Communication Ports | (1) USB, (1) RS-232 serial, Relay output (common alarm standard) |
Communications Slot | Optional communication slots (BD Slot) |
Optional Communication Cards | SNMP/Web card for direct control and monitoring in SNMP-based networks, monitoring of UPS status and meters through Web browser interface Relay card for integration to industrial environment and building management systems, remote shutdown for IBM AS/400 systems |
Power Management Software | Bundled software suite CD |
General | |
Topology | Online, double-conversion |
Configuration | Rackmount |
Color | Black |
Rating (VA/Watts) | 2500/2250 |
Diagnostics | Full system self-test |
Efficiency | >95% in high-efficiency mode; >86% in online mode |
UPS Bypass | Automatic bypass |
Rail Kit Included | Included with all rackmount units |
Warranty | Two-year factory warranty |
Remote Emergency Power off (REPO) | Emergency shutdown control through the REPO port |
Standards | |
Safety markings | UL, cUL, VCCI |
EMC Markings | FCC Class A, EN55022 Class A |
RoHS Compliance | Yes |
The Eaton Powerware PW9130L2500R-XL2U is a 2U, 120V, 2500VA / 2250W, 50/60 Hz, (6) 5-20R, (1) L5-30R outlet, Online, double-conversion rack mount UPS.
The Eaton 9130 Rackmount UPS delivers online power quality and scalable battery runtimes for rack servers, voice and data networks, storage systems and other IT equipment. With an efficiency rating of >95%, the 9130 UPS cuts energy costs while packing up to three kVA of power into only 2U of rack space. The 9130 UPS significantly extends battery service life with ABM technology and also has a bright LCD user interface to simplify monitoring.
Eaton's UPSs are now fully configurable and customizable. If you are interested in customizing this line of UPSs, please Contact Us.
]]>
Eaton 9130 UPS mounting in server rack
Package Includes:
Eaton PW9130L3000R-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.6 cm.) |
Width | 17.2 in. (43.7 cm.) |
Depth | 23.6 in. (59.9 cm.) |
Weight | 65 lbs. (29 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 1257, Bat: 1755 |
Audible Noise | <50 dB |
Operating Temperature | -20˚C (-4˚F) to +40˚C (104˚F) with batteries and -25˚C (-13˚F) to +55˚C (131 ˚F) without batteries |
Storage Temperature | -20°C (-4°F) to +40°C (104°F) with batteries and -25°C (-13°F) to +55°C (131 °F) without batteries |
Relative Humidity | 5–90% non-condensing |
Electrical Input | |
Connection | L5-30P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 90-138 Vac |
Nominal Voltage | 120V |
Frequency | 50/60 Hz |
Frequency Range | 45–65 Hz |
Nominal Current | 25 A |
Breaker Ratings | 30A |
Generator Compatability | Yes |
Electrical Output | |
Output Receptacles | (6) 5-20R, (1) L5-30R |
On Utility Voltage Regulation | ±3% of nominal |
On Battery Voltage Regulation | ±3% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Frequency Regulation | ±3% Hz online |
Load Crest Factor | 3 to 1 |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 72 Vdc; (6) 12V, 9 Ah |
Half Load Runtime (in mins) | 13 |
Full Load Runtime (in mins) | 5 |
Battery Replacement | Hot-swappable internal and external batteries |
Start On Battery | Allows start of UPS without utility input |
Recharge Time | Internal batteries: 3 hours. 1 EBM: 9 hours; 2 EBM: 15 hours; 3 EBM: 21 hours; 4 EBM: 27 hours |
Communications | |
User Interface | Graphical LCD with blue backlight and text in English, French, German, Russian and Spanish |
LEDs | Four status-indicating LEDs |
Communication Ports | (1) USB, (1) RS-232 serial, Relay output (common alarm standard) |
Communications Slot | Optional communication slots (BD Slot) |
Optional Communication Cards | SNMP/Web card for direct control and monitoring in SNMP-based networks, monitoring of UPS status and meters through Web browser interface Relay card for integration to industrial environment and building management systems, remote shutdown for IBM AS/400 systems |
Power Management Software | Bundled software suite CD |
General | |
Topology | Online, double-conversion |
Configuration | Rackmount |
Color | Black |
Rating (VA/Watts) | 3000/2700 |
Diagnostics | Full system self-test |
Efficiency | >95% in high-efficiency mode; >86% in online mode |
UPS Bypass | Automatic bypass |
Rail Kit Included | Included with all rackmount units |
Warranty | Two-year factory warranty |
Remote Emergency Power off (REPO) | Emergency shutdown control through the REPO port |
Standards | |
Safety markings | UL, cUL, VCCI |
EMC Markings | FCC Class A, EN55022 Class A |
RoHS Compliance | Yes |
The Eaton Powerware PW9130L3000R-XL2U is a 2U, 120V, 3000VA / 2700W, 50/60 Hz, (6) 5-20R, (1) L5-30R outlet, Online, double-conversion rack mount UPS.
The Eaton 9130 Rackmount UPS delivers online power quality and scalable battery runtimes for rack servers, voice and data networks, storage systems and other IT equipment. With an efficiency rating of >95%, the 9130 UPS cuts energy costs while packing up to three kVA of power into only 2U of rack space. The 9130 UPS significantly extends battery service life with ABM technology and also has a bright LCD user interface to simplify monitoring.
Eaton's UPSs are now fully configurable and customizable. If you are interested in customizing this line of UPSs, please Contact Us.
]]>
Eaton 9130 UPS mounting in server rack
Package Includes:
Eaton PW9130L700R-XL2U Specifications:
Mechanical | |
Height | 3.4 in. (8.6 cm.) |
Width | 17.2 in. (43.7 cm.) |
Depth | 17.7 in. (45.0 cm.) |
Weight | 35.3 lbs. (16.0 kg.) |
Environmental | |
Heat Dissipation (BTU) | Line: 350, Bat: 554 |
Audible Noise | <50 dB |
Operating Temperature | -20˚C (-4˚F) to +40˚C (104˚F) with batteries and -25˚C (-13˚F) to +55˚C (131 ˚F) without batteries |
Storage Temperature | -20°C (-4°F) to +40°C (104°F) with batteries and -25°C (-13°F) to +55°C (131 °F) without batteries |
Relative Humidity | 5–90% non-condensing |
Electrical Input | |
Connection | 5-15P |
Input Cord | 6 ft. (1.8 m) |
Input Voltage Range | 90-138 Vac |
Nominal Voltage | 120V |
Frequency | 50/60 Hz |
Frequency Range | 45–65 Hz |
Nominal Current | 5.8 A |
Breaker Ratings | 15A |
Generator Compatability | Yes |
Electrical Output | |
Output Receptacles | (6) 5-15R |
On Utility Voltage Regulation | ±3% of nominal |
On Battery Voltage Regulation | ±3% of nominal |
Voltage Wave Shape (On Battery) | Sine wave |
Power Factor | 0.9 |
Frequency Regulation | ±3% Hz online |
Load Crest Factor | 3 to 1 |
Battery | |
Maximum Number of Battery Packs | 4 |
Battery Type | 36 Vdc; (3) 12V, 9 Ah |
Half Load Runtime (in mins) | 32 |
Full Load Runtime (in mins) | 14 |
Battery Replacement | Hot-swappable internal and external batteries |
Start On Battery | Allows start of UPS without utility input |
Recharge Time | Internal batteries: 3 hours. 1 EBM: 9 hours; 2 EBM: 15 hours; 3 EBM: 21 hours; 4 EBM: 27 hours |
Communications | |
User Interface | Graphical LCD with blue backlight and text in English, French, German, Russian and Spanish |
LEDs | Four status-indicating LEDs |
Communication Ports | (1) USB, (1) RS-232 serial, Relay output (common alarm standard) |
Communications Slot | Optional communication slots (BD Slot) |
Optional Communication Cards | SNMP/Web card for direct control and monitoring in SNMP-based networks, monitoring of UPS status and meters through Web browser interface Relay card for integration to industrial environment and building management systems, remote shutdown for IBM AS/400 systems |
Power Management Software | Bundled software suite CD |
General | |
Topology | Online, double-conversion |
Configuration | Rackmount |
Color | Black |
Rating (VA/Watts) | 700/630 |
Diagnostics | Full system self-test |
Efficiency | >95% in high-efficiency mode; >86% in online mode |
UPS Bypass | Automatic bypass |
Rail Kit Included | Included with all rackmount units |
Warranty | Two-year factory warranty |
Remote Emergency Power off (REPO) | Emergency shutdown control through the REPO port |
Standards | |
Safety markings | UL, cUL, VCCI |
EMC Markings | FCC Class B, EN55022 Class B |
RoHS Compliance | Yes |
The Eaton Powerware PW9130L700R-XL2U is a 2U, 120V, 700VA / 630W, 50/60 Hz, (6) 5-15R outlet, Online, double-conversion rack mount UPS.
The Eaton 9130 Rackmount UPS delivers online power quality and scalable battery runtimes for rack servers, voice and data networks, storage systems and other IT equipment. With an efficiency rating of >95%, the 9130 UPS cuts energy costs while packing up to three kVA of power into only 2U of rack space. The 9130 UPS significantly extends battery service life with ABM technology and also has a bright LCD user interface to simplify monitoring.
Eaton's UPSs are now fully configurable and customizable. If you are interested in customizing this line of UPSs, please Contact Us.
]]>Eaton PW101BA1U140 Basic ePDU:
Current: 12A (1.44 kW)
Voltage: 110-125V
Input Plug: 5-15P, 9ft Chord
Outlets: (12) 5-15R
Circuit Breakers: (1) 15A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW101MI1U221 Monitored ePDU:
Current: 12A (1.44 kW)
Voltage: 110-125V
Input Plug: 5-15P, 9ft Chord
Outlets: (12) 5-15R
Circuit Breakers: (1) 15A
Mounting: 1U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>Eaton PW101MI1U403 Monitored ePDU:
Current: 16A (1.92 kW)
Voltage: 110-125V
Input Plug: 5-15P, 9ft Chord
Outlets: (12) 5-20R
Circuit Breakers: (1) 20A
Mounting: 1U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW101SW0U224 Switched ePDU:
Current: 12A (1.44 kW)
Voltage: 110-125V
Input Plug: 5-15P, 9ft Chord
Outlets: (16) 5-15R
Circuit Breakers: None
Mounting: 0U Vertical
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>Eaton PW102BA1U158 Basic ePDU:
Current: 16A (1.92 kW)
Voltage: 110-125V
Input Plug: 5-20P, 9ft Chord
Outlets: (12) 5-20R
Circuit Breakers: (1) 20A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW102BA1U159 Basic ePDU:
Current: 16A (1.92 kW)
Voltage: 110-125V
Input Plug: L5-20P, 9ft Chord
Outlets: (12) 5-20R
Circuit Breakers: (1) 20A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW102MI1U160 Monitored ePDU:
Current: 16A (1.92 kW)
Voltage: 110-125V
Input Plug: L5-20P, 9ft Chord
Outlets: (12) 5-20R
Circuit Breakers: (1) 20A
Mounting: 1U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW102SW0U150 Switched ePDU:
Current: 16A (1.92 kW)
Voltage: 110-125V
Input Plug: L5-20P, 9ft Chord
Outlets: (8) 5-15R
Circuit Breakers: None
Mounting: 0U Vertical
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW102SW0U151 Switched ePDU:
Current: 16A (1.92 kW)
Voltage: 110-125V
Input Plug: L5-20P, 9ft Chord
Outlets: (24) 5-15R
Circuit Breakers: None
Mounting: 0U Vertical
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>Eaton PW103BA0U237 Basic ePDU:
Current: 16A (3.33 kW)
Voltage: 208-240V
Input Plug: L6-20P, 9ft Chord
Outlets: (24) C13 & (4) C19
Circuit Breakers: None
Mounting: 0U Vertical
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW103BA0U257 Basic ePDU:
Current: 24A (2.88 kW)
Voltage: 110-125V
Input Plug: L5-30P, 9ft Chord
Outlets: (24) 5-20R
Circuit Breakers: (2) 20A
Mounting: 0U Vertical
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW103BA1U190 Basic ePDU:
Current: 24A (2.88 kW)
Voltage: 110-125V
Input Plug: L5-30P, 9ft Chord
Outlets: (12) 5-20R
Circuit Breakers: (2) 20A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW103BA1U191 Basic ePDU:
Current: 16A (3.33 kW)
Voltage: 208-240V
Input Plug: L6-20P, 9ft Chord
Outlets: (12) C13
Circuit Breakers: (1) 20A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW103BA1U406 Basic ePDU:
Current: 24A (3.33 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (16) C13
Circuit Breakers: (2) 15A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW103MI1U161 Monitored ePDU:
Current: 24A (2.88 kW)
Voltage: 110-125V
Input Plug: L5-30P, 9ft Chord
Outlets: (12) 5-20R
Circuit Breakers: (2) 20A
Mounting: 1U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>Eaton PW103MI1U162 Monitored ePDU:
Current: 16A (3.33 kW)
Voltage: 208-240V
Input Plug: L6-20P, 9ft Chord
Outlets: (12) C13
Circuit Breakers: (1) 20A
Mounting: 1U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW103SW0U153 Switched ePDU:
Current: 16A (3.33 kW)
Voltage: 208-240V
Input Plug: L6-20P, 10ft Chord
Outlets: (24) C13
Circuit Breakers: None
Mounting: 0U Vertical
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>Eaton Powerware IPC3401-NET Specifications:
Mechanical | |
Height | 1.7 in. (4.3 cm.) |
Width | 19 in. (48 cm.) |
Depth | 9.5 in. (24 cm.) |
Weight | 12 lbs. (5.4 kg.) |
U Height | 1U |
Mounting Style | Horizontal |
Color | Black |
Input | |
Max kVA | 3.84 (Standard Power) |
Plug | IEC 60320 C20 (1-Phase 100-240VAC 20A Plug) |
Cable Length | NA |
Voltage | 1-Phase 100-240 |
Current | 16A |
Phase | Single Phase (L, N, G or L, L, G) |
Frequency | 50-60 HZ |
Output | |
Outlets | (8) IEC 60320 C13 (1-Phase 100-240VAC 15A Outlet) |
Protection & Filtering | |
Circuit Breaker(s) | 2P 20A |
Spike/Surge Suppression | Yes |
EMI/RFI Filter | Yes (010-0317) |
Control & Interface | |
Ports | DB9 (Serial) RJ45 (Ethernet- Web + Telnet) RJ45 (Strapping) |
Files | |
Manuals & Guidelines | Manual (right click & choose save link as to download) |
Approvals | FCC GS UL Listed |
The Eaton IPC3401-NET (PW103SW2U413) is an 8 outlet Switched PDU. It is designed for data centers, remote site management; the switched ePDU provides remote power monitoring of both voltage and current. The current is also displayed on a local two-digit current meter. Employing multiple configurations, available in 42" or 70" vertical lengths, providing individual on/off/reboot control of 8 to 24 AC power receptacles. The control interface is highly customizable with multiple functions and flexibility, allowing setup to send either SNMP traps or e-mail alerts.
]]>Eaton Powerware IPC3402-NET Specifications:
Mechanical | |
Height | 1.7 in. (4.3 cm.) |
Width | 19 in. (48 cm.) |
Depth | 9.5 in. (24 cm.) |
Weight | 12 lbs. (5.4 kg.) |
U Height | 1U |
Mounting Style | Horizontal |
Color | Black |
Input | |
Max kVA | 1.92 (Standard Power) |
Plug | IEC 60320 C20 (1-Phase 100-240VAC 20A Plug) |
Cable Length | NA |
Voltage | 1-Phase 110-125 |
Current | 16A |
Phase | Single Phase (L, N, G or L, L, G) |
Frequency | 50-60 HZ |
Output | |
Outlets | (8) IEC 60320 C13 (1-Phase 100-240VAC 15A Outlet) |
Protection & Filtering | |
Circuit Breaker(s) | 1P 20A |
Spike/Surge Suppression | Yes |
EMI/RFI Filter | Yes (010-0317) |
Control & Interface | |
Ports | DB9 (Serial) RJ45 (Ethernet- Web + Telnet) RJ45 (Strapping) |
Files | |
Manuals & Guidelines | Manual (right click & choose save link as to download) |
Approvals | FCC GS UL Listed |
The Eaton IPC3402-NET is an 8 outlet Switched PDU. It is designed for data centers, remote site management; the switched ePDU provides remote power monitoring of both voltage and current. The current is also displayed on a local two-digit current meter. Employing multiple configurations, available in 42" or 70" vertical lengths, providing individual on/off/reboot control of 8 to 24 AC power receptacles. The control interface is highly customizable with multiple functions and flexibility, allowing setup to send either SNMP traps or e-mail alerts.
]]>Eaton PW105BA0U239 Basic ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (24) C13 & (4) C19
Circuit Breakers: (2) 20A
Mounting: 0U Vertical
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW105BA0U412 Basic ePDU:
Current: 24A (4.99 kW)
Voltage: 120/240V Split Phase
Input Plug: L14-30P, 6ft Chord
Outlets: (12) 5-15R
Circuit Breakers: (6) 15A
Mounting: 0U Vertical
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW105BA0U421 Basic ePDU:
Current: 24A (4.99 kW)
Voltage: 120/240V Split Phase
Input Plug: L14-30P, 9ft Chord
Outlets: (24) 5-20R
Circuit Breakers: (4) 2 Pole 20A
Mounting: 0U Vertical
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW105BA1U163 Basic ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (12) C13
Circuit Breakers: (2) 15A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW105BA1U192 Basic ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (8) C13 & (4) C19
Circuit Breakers: (2) 15A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW105BA1U404 Basic ePDU:
Current: 24A (4.99 kW)
Voltage: 120/240V Split Phase
Input Plug: L14-30P, 9ft Chord
Outlets: (12) 5-15R
Circuit Breakers: (2) 15A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW105BA2U422 Basic ePDU:
Current: 30A (4.99 kW)
Voltage: 120/240V Split Phase
Input Plug: L14-30P, 9ft Chord
Outlets: (4) L6-20R
Circuit Breakers: (4) 2 Pole 20A
Mounting: 2U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW105MI1U164 Monitored ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (12) C13
Circuit Breakers: (2) 15A
Mounting: 1U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>Eaton PW105MI1U165 Monitored ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (6) C13 & (4) C19
Circuit Breakers: (2) 15A
Mounting: 1U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>Eaton PW105MI2U402 Monitored ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 15ft Chord
Outlets: (20) C13
Circuit Breakers: (2) 20A
Mounting: 2U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW105SW2U223 Switched ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (20) C13
Circuit Breakers: (2) 20A
Mounting: 2U Horizontal
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW105SW2U415 Switched ePDU:
Current: 24A (4.99 kW)
Voltage: 208-240V
Input Plug: L6-30P, 9ft Chord
Outlets: (20) C13 & (4) C19
Circuit Breakers: (2) 20A
Mounting: 2U Horizontal
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW306SW0U155 Switched ePDU:
Current: 16A (5.76 kW)
Voltage: 120/208V 3-Ph Wye
Input Plug: L21-20P, 9ft Chord
Outlets: (24) 5-15R
Circuit Breakers: None
Mounting: 0U Vertical
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>Eaton PW309BA0U409 Basic ePDU:
Current: 24A (8.65 kW)
Voltage: 120/208V 3-Phase Wye
Input Plug: L21-30P, 9ft Chord
Outlets: (24) 5-20R
Circuit Breakers: (3) 20A
Mounting: 0U Vertical
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW314BA1U193 Basic ePDU:
Current: 50A (14.4 kW)
Voltage: 208V 3-Phase Delta
Input Plug: CS8365, 9ft Chord
Outlets: (6) C19
Circuit Breakers: (6) 20A
Mounting: 1U Horizontal
The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
]]>Eaton PW317MI2U141 Monitored ePDU:
Current: 48A (17.29 kW)
Voltage: 208V 3-Ph Delta
Input Plug: IEC30960 460P9W, 10ft Chord
Outlets: (12) C19
Circuit Breakers: (6) 20A
Mounting: 2U Horizontal
Eaton Monitored ePDUs provide remote current-draw monitoring of individual sections worldwide via Ethernet or serial communication. This capability, combined with state-of-the-art software allows you to aggregate circuit and ePDU-level information from hundreds of PDUs in one location. All Monitored ePDUs also include the Easy-Read digital LED ammeter for easy start-up and provisioning of servers.
]]>*optional sensors:
SENSOR-T1-10 - (1) Temperature sensor, 10ft
SENSOR-T2-10 - (2) Temperature sensor, 10ft
SENSOR-T1H1-10 - (1) Temperature sensor, (1) Humidity sensor, 10ft
SENSOR-T2H1-10 - (2) Temperature sensor, (1) Humidity sensor, 10ft
Eaton Switched PDU Features:
Eaton PW317SW0U400 Switched ePDU:
Current: 48A (17.29 kW)
Voltage: 120/208V 3-Ph Delta
Input Plug: IEC 60309P 460P9W, 12ft Chord
Outlets: (18) C13 & (6) C19
Circuit Breakers: (6) 20A
Mounting: 0U Vertical
Eaton Switched PDU series provides individual on/off/reboot control of up to 36 receptacles. Designed for data centers needing remote site management, Eaton Switched PDUs also provide remote monitoring of voltage, current, temperature*, and humidity*, via the network. Power current is also displayed on a local two-digit current meter. The control interface is highly customizable with multiple functions and flexibility to send either SNMP traps or e-mail alerts.
]]>*Available on some models
]]>Eaton offers a wide variety of open frame racks, server racks and enclosures for small, medium and enterprise data centers.
]]>
Eaton RSANCB is a black Rack Anchor Kit (including hardware) for Eaton RS-series server racks. Anchor brackets attach to the front and rear of the enclosure for anchoring the rack to the data center floor.
]]>Eaton RSANCW is a white Rack Anchor Kit (including hardware) for Eaton RS-series server racks. Anchor brackets attach to the front and rear of the enclosure for anchoring the rack to the data center floor.
]]>Eaton RSBAYKITW is a white Enclosure Baying Kit, with hardware and filler, for Eaton RS-series server racks. The baying kit includes a spare set of baying brackets (all enclosures come standard with a baying kit) and a black filler strip which can be used when mounting enclosures on 24" spacing to fill the gap between the racks.
]]>Eaton RSBB42 is a 42U tall Electrical Grounding Buss bar with mounting hardware.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4281B is a 42U H x 31.5"W (800mm) x 43.31"D (1100mm) Black RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4281B Includes
Comparable Racks: APC AR3140
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4281W is a 42U H x 31.5"W (800mm) x 43.31"D (1100mm) White RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4281W Includes
Comparable Racks: APC AR3140W
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4282B is a 42U H x 31.5"W (800mm) x 47.25"D (1200mm) Black RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4282B Includes
Comparable Racks: APC AR3340
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4282W is a 42U H x 31.5"W (800mm) x 47.25"D (1200mm) White RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4282W Includes
Comparable Racks: APC AR3340W
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4861B is a 48U H x 23.63"W (600mm) x 43.31"D (1100mm) Black RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4861B Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4861W is a 48U H x 23.63"W (600mm) x 43.31"D (1100mm) White RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4861W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4862B is a 48U H x 23.63"W (600mm) x 47.25"D (1200mm) Black RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4862B Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4862W is a 48U H x 23.63"W (600mm) x 47.25"D (1200mm) White RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4862W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4881B is a 48U H x 31.5"W (800mm) x 43.31"D (1100mm) Black RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4881B Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4881W is a 48U H x 31.5"W (800mm) x 43.31"D (1100mm) White RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4881W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4882B is a 48U H x 31.5"W (800mm) x 47.25"D (1200mm) Black RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4882B Includes
Comparable Racks: APC AR3347
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSN4882W is a 48U H x 31.5"W (800mm) x 47.25"D (1200mm) White RS-Series Server Rack (Network Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSN4882W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4260B is a 42U H x 23.63"W (600mm) x 39.38"D (1000mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4260B Includes
Comparable Racks: Tripplite SR2000, Tripplite SR42UBMD, Chatsworth GF1A220
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4261B is a 42U H x 23.63"W (600mm) x 43.31"D (1100mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4261B Includes
Comparable Racks: APC AR3100, APC AR3100TAA, Tripplite SR2400, Tripplite SR42UB, Chatsworth GF1A320
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4261W is a 42U H x 23.63"W (600mm) x 43.31"D (1100mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4261W Includes
Comparable Racks: APC AR3100W, Tripplite SR42UW
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4262W is a 42U H x 23.63"W (600mm) x 47.25"D (1200mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4262W Includes
Comparable Racks: APC AR3300W
]]>Eaton RSCMBFT42U62 is a 2" x 6" Vertical Cable Flextray with Mounting Hardware for 42U Eaton Racks.
Eaton RSCMPWR11 is a 11U Cable Management Bar for Power Cord / PDU Management in Eaton RS Racks. Install tool-less device power cable management bar to rack rail. This bar, along with the use of cable ties, helps to effectively manage power cords of installed equipment within enclosure.
]]>Dimensional Drawings:
]]>Eaton RSHDLC is a Combination Lock Handle Kit for Eaton RS-series rack doors.
]]>With the Administration Suite, you can administer, document and protect access to all racks. One has full control over all cabinets and enclosures secured with HFID Locks by DIRAK systems, while at the same time having a high degree of flexibility. The Administration Suite software offers many features: comprehensive alarm management, the ability to manage systems in different time zones, administration of different facilities from one user interface and the documented XML interface, which enables data to be imported and exported.
The integrated Web Client makes it possible for any number of users to connect remotely to the Administration Suite server via a simple web browser. Any device with a browser function (iPad, tablet PC, iPhone, Blackberry, etc.) can be used to access the Administration Suite without having to install additional software on the device.
]]>* Bottom Panel Configuration: For use in configurations with rails recessed greater than 100 mm.
]]>* Bottom Panel Configuration: For use in configurations with rails recessed greater than 100 mm.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4280W is a 42U H x 31.5"W (800mm) x 39.38"D (1000mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4280W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4281B is a 42U H x 31.5"W (800mm) x 43.31"D (1100mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4281B Includes
Comparable Racks: APC AR3150, Tripplite SR42UBWD, Tripplite SR42UBWDTAA, Chatsworth GF1B320, Chatsworth GF1C320
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4281W is a 42U H x 31.5"W (800mm) x 43.31"D (1100mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4281W Includes
Comparable Racks: APC AR3150W
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4282B is a 42U H x 31.5"W (800mm) x 47.25"D (1200mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4282B Includes
Comparable Racks: APC AR3350, Chatsworth GF1B420, Chatsworth GF1C420
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4282W is a 42U H x 31.5"W (800mm) x 47.25"D (1200mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4282W Includes
Comparable Racks: APC AR3350W
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4861W is a 48U H x 23.63"W (600mm) x 43.31"D (1100mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4861W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4862B is a 48U H x 23.63"W (600mm) x 47.25"D (1200mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4862B Includes
Comparable Racks: APC AR3307, Tripplite SR48UBDP, Chatsworth GF3A420
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4881B is a 48U H x 31.5"W (800mm) x 43.31"D (1100mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4881B Includes
Comparable Racks: APC AR3157, Tripplite SR48UBWD, Chatsworth GF3B320, Chatsworth GF3C320
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4881W is a 48U H x 31.5"W (800mm) x 43.31"D (1100mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4881W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4882B is a 48U H x 31.5"W (800mm) x 47.25"D (1200mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4882B Includes
Comparable Racks: APC AR3357, Tripplite SR48UBDPWD, Chatsworth GF3B420, Chatsworth GF3C420
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4882W is a 48U H x 31.5"W (800mm) x 47.25"D (1200mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4882W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSPDU9MTGB is an 90-Degree ePDU Mounting Bracket (black). 90-Degree ePDU Mounting Brackets are used to mount PDUs into a rack by attaching a bracket behind one of the rack rails.
]]>Eaton RSPDU9MTGW is an 90-Degree ePDU Mounting Bracket (white). 90-Degree ePDU Mounting Brackets are used to mount PDUs into a rack by attaching a bracket behind one of the rack rails.
]]>Eaton RSPDULMTGB is an extended ePDU Mounting Bracket (black) with Cable Management slots. Extended ePDU Mounting Brackets are used to mount PDUs in a variety of locations within a rack by attaching a bracket to the rack frame.
]]>Eaton RSPDULMTGW is an extended ePDU Mounting Bracket (white) with Cable Management slots. Extended ePDU Mounting Brackets are used to mount PDUs in a variety of locations within a rack by attaching a bracket to the rack frame.
]]>Eaton RSPDUMTGB is a standard ePDU Mounting Bracket (black) with Cable Management slots. ePDU Mounting Brackets are used to mount PDUs in a variety of locations within a rack by attaching a bracket to the rack frame.
]]>Eaton RSPDUMTGW is a standard ePDU Mounting Bracket (white) with Cable Management slots. ePDU Mounting Brackets are used to mount PDUs in a variety of locations within a rack by attaching a bracket to the rack frame.
]]>Eaton RSPDURTNKITB is a retainer kit for PDUs within a rack
]]>Eaton RSSTUDKIT100 is a kit of 100 tool-less 'Rackstuds'. Rackstuds are tool-less Cagenuts that do not require any seperate screws or tools. No more falling screws during installation, having to deal with finding specific screw types, or fiddling with a set of screw drivers!
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4260W is a 42U H x 23.63"W (600mm) x 39.38"D (1000mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4260W Includes
All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4262B is a 42U H x 23.63"W (600mm) x 47.25"D (1200mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4262B Includes
Comparable Racks: APC AR3300, Tripplite SR42UBED, Chatsworth GF1A420
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4280B is a 42U H x 31.5"W (800mm) x 39.38"D (1000mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4280B Includes
Comparable Racks: Chatsworth GF1B220, Chatsworth GF1C220
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4861B is a 48U H x 23.63"W (600mm) x 43.31"D (1100mm) Black RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4861B Includes
Comparable Racks: APC AR3107, APC AR3107TAA, Tripplite SR4861B, Chatsworth GF3A320
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Eaton RSV4862W is a 48U H x 23.63"W (600mm) x 47.25"D (1200mm) White RS-Series Server Rack (Server Configuration). From network closets to multi-tenant data centers, the RS Enclosure provides a highly configurable and energy efficient solution for equipment storage. RS features tool-less configuration, optimized power distribution, flexible cable management solutions and security provisions.
Eaton RSV4862W Includes
Comparable Racks: APC AR3307W
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
Black. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>All Eaton RS models are TAA Compliant & Made in USA
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
To help reduce installation time, RS supports tool-less configuration of all key enclosure components.
Today’s increasing power densities require flexible ePDU rack power distribution mounting and cable management solutions.
Full range of airflow management options including brush and grommet top and bottom panels, side air dams and blanking panels.
Security is a key consideration for many customers, including MTDC’s.
Eaton RS Racks feature a weight capacity of 3000 lbs. static loading; 2000 lbs. dynamic loading.
UL 2416 for data center applications (includes UL 60950), Seismic Anchorage, EIA-310, & CE.
5 Years.
Learn More:
Eaton RS-Series Brochure (PDF)
PN | Color | Height | Width | Depth | Description |
RS Server Configuration | |||||
RSV4260B | Black | 42U | 600mm (23.63in) | 1000mm (39.38in) | Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSV4260W | White | ||||
RSV4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4261W | White | ||||
RSV4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4262W | White | ||||
RSV4280B | Black | 42U | 800mm (31.5in) | 1000mm (39.38in) | |
RSV4280W | White | ||||
RSV4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4281W | White | ||||
RSV4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4282W | White | ||||
RSV4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSV4861W | White | ||||
RSV4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSV4862W | White | ||||
RSV4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSV4881W | White | ||||
RSV4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSV4882W | White | ||||
RS Network Configuration | |||||
RSN4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Key-lock door handle & vertical cable managers in front + rear. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSN4261W | White | ||||
RSN4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4262W | White | ||||
RSN4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4281W | White | ||||
RSN4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4282W | White | ||||
RSN4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSN4861W | White | ||||
RSN4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSN4862W | White | ||||
RSN4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSN4881W | White | ||||
RSN4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSN4882W | White | ||||
RS Colocation Configuration | |||||
RSC4261B | Black | 42U | 600mm (23.63in) | 1100mm (43.31in) | Combination-lock door handle & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters. |
RSC4261W | White | ||||
RSC4262B | Black | 42U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4262W | White | ||||
RSC4281B | Black | 42U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4281W | White | ||||
RSC4282B | Black | 42U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4282W | White | ||||
RSC4861B | Black | 48U | 600mm (23.63in) | 1100mm (43.31in) | |
RSC4861W | White | ||||
RSC4862B | Black | 48U | 600mm (23.63in) | 1200mm (47.25in) | |
RSC4862W | White | ||||
RSC4881B | Black | 48U | 800mm (31.5in) | 1100mm (43.31in) | |
RSC4881W | White | ||||
RSC4882B | Black | 48U | 800mm (31.5in) | 1200mm (47.25in) | |
RSC4882W | White |
White. Key-lock door handle, Dual PDU bracket kit & flush mounted rails. Includes dual PDU bracket kit, rails, networking top w/ cable grommets, perforated doors, & casters.
]]>Temperature Sensor | |
Temp. Range | 5°F to 150°F |
Accuracy | +/- 2°F typical, +/- 4°F max |
Cable | 10ft, RJ45 Connector |
Sensor Enclosure | Polycarbonate Tubing |
Compliance | RoHS |
Eaton SENSOR-T1-10:
(1) Temperature Sensor, 10ft
Temperature Sensor | |
Range | 5°F to 150°F |
Accuracy | +/- 2°F typical, +/- 4°F max |
Cable | 10ft, RJ45 Connector |
Sensor Enclosure | Polycarbonate Tubing |
Humidity Sensor | |
Range | 0% to 100%, Non-condensing |
Accuracy* | 0 to 60%, +/- 7%, 60 to 100%, +/- 10% |
Cable | 10ft, RJ45 Connector |
Sensor Enclosure | Polycarbonate Tubing |
Compliance | RoHS |
*NOTE: Do not expose sensor to condensing environments. Humidity readings will be 0% until the condensation evaporates.
]]>Eaton SENSOR-T1H1-10:
(2) Temperature Sensor, 10ft
(1) Humidity Sensor, 10ft
Temperature Sensor | |
Temp. Range | 5°F to 150°F |
Accuracy | +/- 2°F typical, +/- 4°F max |
Cable | 10ft, RJ45 Connector |
Sensor Enclosure | Polycarbonate Tubing |
Compliance | RoHS |
Eaton SENSOR-T2-10:
(2) Temperature Sensor, 10ft
Temperature Sensor | |
Range | 5°F to 150°F |
Accuracy | +/- 2°F typical, +/- 4°F max |
Cable | 10ft, RJ45 Connector |
Sensor Enclosure | Polycarbonate Tubing |
Humidity Sensor | |
Range | 0% to 100%, Non-condensing |
Accuracy* | 0 to 60%, +/- 7%, 60 to 100%, +/- 10% |
Cable | 10ft, RJ45 Connector |
Sensor Enclosure | Polycarbonate Tubing |
Compliance | RoHS |
*NOTE: Do not expose sensor to condensing environments. Humidity readings will be 0% until the condensation evaporates.
]]>Eaton SENSOR-T2H1-10:
(2) Temperature Sensor, 10ft
(1) Humidity Sensor, 10ft
Adapters to enable equipment with disparate input/output receptacles to work together.
Standard lead time for this product is 3 weeks.
]]>This unit is the recommended replacement for the Eaton PW101BA1U140.
]]>The Eaton Basic ePDU product line is designed to provide high reliability power distribution to critical power loads. These units feature a small form factor and lightweight chassis that is easy to mount. Rackmount models feature a rotating mounting bracket that allows for vertical mounting. Vertical models offer blind mount bracket and keyhole button mounting options. The high outlet density and a variety of plug/receptacle configurations make it easy to find a configuration that meets your needs.
LEAD TIME: 6-8 Weeks
]]>Eaton is a leading provider of backup power UPS, or uninterruptible power supply. Eaton UPSs deliver high quality, reliable backup power for everything from network closets and server rooms to enterprise and colocation data centers.
]]>For more information see:
Eaton Environmental Rack Monitor (ERM) continuously monitors environmental conditions at the rack level, providing an extra level of security for critical assets. This compact, full-featured unit can monitor conditions in high density data centers, laboratories, hospitals, warehouses, libraries, museums and any other indoor location where the environment must be maintained within acceptable levels.
Part Number | Model |
---|---|
103005775 | Environmental Rack Monitor, NEMA 5-20, 120V 2-pin power input |
103005912 | Environmental Rack Monitor, C13/C14, 100-250V, 3-pin power input |
Part Number | Model |
---|---|
103005822 | Temperature and Humidity (TH) Module, individual |
103005780 | Water Leak Detector, 3 ft |
103005894 | Water Leak Detector, 12 ft |
103005781 | Door Contact Sensor |
103005782 | Vibration Sensor |
103005779 | Smoke Detector/Alarm (220 VAC, IEC C-13) |
103005890 | Smoke Detector/Alarm (110 VAC, NEMA 5-15) |
Part Number | Model |
---|---|
103005783 | Power Supply, NEMA 5-20, 120V |
103005895 | Power Supply, C13/C14 adapter cable, 100-250V |
CPU | 16-bit micro control |
Memory | 2 Mb Static RAM 2 Mb Flash ROM |
Serial Communication | Two asynchronous serial ports |
LAN Chip | Auto-Sense 10/100 Mbps Fast Ethernet controller |
Network Connection | 10/100 TX RJ-45 jack connector |
Network Protocol | SNMP over UDP/IP HTTP over TCP/IP ARP, TFTP, and ICMP |
Operating Temperature | 0–40°C (32–104°F) |
Operating Humidity | 10–80%, noncondensing |
Power Input | 12V DC unregulated |
Power Consumption | 3.0 Watts Maximum |
Size (L x W x H) | 5.3” x 3.4” x 1.1" (13.4 cm x 8.6 cm x 2.7 cm) |
Weight | 170 g (6 oz) |
EMC Statements | Class B: FCC Part 15, ICES-003, CE |
Server rack enclosure fans are used to help facilitate air flow within the rack by adding ventilation where it is needed most. Rack fans can be mounted in cabinet doors, cabinet sides, and cabinet roofs. Some manufacturers also make rack mount fan trays that sit directly in open rack space. When adding enclosure fans to your server rack, be sure to use blanking panels for any gaps to maximize airflow.
Most enclosure manufacturers design fans specific to their server racks. Server Racks Online carries a wide variety of cabinet specific fans. If you don't see a suitable fan below, please contact us to find the right fan for your server rack.
Enclosure Fans | Rack Space | Fans / Airflow | Image | Mounting / Compatibility |
Enclosure Fan - Ultra Quiet | N/A | (1) x 78 CFM | 4.7"W x 4.7"D x 1.52"H | |
Enclosure Fan - High Speed | N/A | (1) x 115 CFM | 4.7"W x 4.7"D x 1.52"H | |
Enclosure Triple Fan Kit | N/A | (3) x 115 CFM | 3 RMU | |
10" Enclosure Fan | N/A | (1) x 550 CFM | 10" Diameter x 3" Depth | |
Door Fan Panel - Front Inside / Rear Outside Mount | N/A | (9) x 108 CFM | Any Enclosure > 32RMU | |
Door Fan Panel - Front Outside / Rear Inside Mount | N/A | (9) x 108 CFM | Any Enclosure > 32RMU | |
Door Intelligent Variable Speed Fan - Front Inside / Rear Outside Mount | N/A | (9) x 108 CFM | Any Enclosure > 32RMU | |
Door Intelligent Variable Speed Fan - Front Outside / Rear Inside Mount | N/A | (9) x 108 CFM | Any Enclosure > 32RMU | |
Rackmount Fan Trays - 19"EIA | Rack Space | Fans / Airflow | Image | Mounting / Compatibility |
3 Fan, Rackmount Fan Assembly | 2U | (3) x 75 CFM | 19" EIA Server Racks | |
3 Fan, Adjustable Fan Tray | 2U | (3) x 75 CFM | 19" EIA Server Racks | |
6 Fan, Adjustable Fan Tray | 2U | (6) x 75 CFM | 19" EIA Server Racks | |
Basic Fan Panel | 1U | (6) x 108 CFM | 19" EIA Server Racks | |
Intelligent Variable Speed Fan Panel | 1U | (6) x 108 CFM | 19" EIA Server Racks | |
9 Fan, Adjustable Fan Tray | 2U | (9) x 75CFM | 19" EIA Server Racks | |
Basic Fan Panel | 1U | (9) x 108 CFM | 19" EIA Server Racks | |
Intelligent Variable Speed Fan Panel | 1U | (9) x 108 CFM | 19" EIA Server Racks | |
Rack Air Distribution Unit - 120V | 2U | (2) x 252 CFM | 19" EIA-310-D Enclosures | |
Rack Air Distribution Unit - 208V | 2U | (2) x 210 CFM | 19" EIA-310-D Enclosures | |
Rack Side Air Distribution - 120V | 2U | ( 2) x 130CFM | 19" EIA-310-D Enclosures | |
Rack Side Air Distribution - 208V | 2U | (2) x 130 CFM | 19" EIA-310-D Enclosures | |
Fan Controllers | Image | Mounting / Compatibility | ||
Fan Thermostat Controller - 50°-90°F / 10°-30°C Range | - Any fan with a standard US plug (5-15 / 1-15) | |||
Variable Fan Speed Controller - 60 - 100% Speed | - For use with variable speed fans |
APC Rack Fans | Rack Space | Fans / Airflow | Image | Compatibility |
Rack Air Distribution Unit - 120V | 2U | (2) x 252 CFM | 19" EIA-310-D Enclosures | |
Rack Air Distribution Unit - 208V | 2U | (2) x 210 CFM | 19" EIA-310-D Enclosures | |
Rack Side Air Distribution - 120V | 2U | ( 2) x 130CFM | 19" EIA-310-D Enclosures | |
Rack Side Air Distribution - 208V | 2U | (2) x 130 CFM | 19" EIA-310-D Enclosures | |
Netshelter SX Roof Fan - 115V (600mm Enclosure) | 0U | (4) x 110 CFM | Netshelter SX Enclosures | |
Netshelter SX Roof Fan - 115V (750mm Enclosure) | 0U | (4) x 110 CFM | Netshelter SX Enclosures | |
Netshelter SX Roof Fan - 208V (600mm Enclosure) | 0U | (4) x 110 CFM | Netshelter SX Enclosures | |
Netshelter SX Roof Fan - 208V (750mm Enclosure) | 0U | (4) x 110 CFM | Netshelter SX Enclosures | |
Netshelter WX Roof Fan - 115V | 1U | (2) x 110 CFM | Netshelter WX Enclosures | |
Netshelter WX Roof Fan - 208V | 1U | (2) x 110 CFM | Netshelter WX Enclosures | |
NetShelter SX Booster Fan | 0U | NetShelter SX 18U, 24U, or 38U |
Great Lakes Rack Fans | Rack Space | Fans / Airflow | Image | Compatibility |
Fan Assembly with Guards | N/A | (2) x 75 CFM | 10" Diameter x 3" Depth | |
3 Fan, Rackmount Fan Assembly | 2U | (3) x 75 CFM | 19" EIA Server Racks | |
3 Fan, Adjustable Fan Tray | 2U | (3) x 75 CFM | 19" EIA Server Racks | |
6 Fan, Adjustable Fan Tray | 2U | (6) x 75 CFM | 19" EIA Server Racks | |
9 Fan, Adjustable Fan Tray | 2U | (9) x 75CFM | 19" EIA Server Racks | |
Air Manager Fan Tray - 24" Enclosure | 1U | (2) x 300 CFM | Requires - an Air Manager Assembly | |
Air Manager Fan Tray - 30" Enclosures | 1U | (2) x 300 CFM | Requires - an Air Manager Assembly | |
Air Manager Assembly | 1U | N/A | ES Series Enclosures | |
NEMA 12 Fan Assembly and Exhaust Filter | N/A | (1) x 230 CFM | Great Lakes NEMA 12 Enclosures | |
NEMA 12 Fan Assembly and Exhaust Filter | N/A | (1) x 295 CFM | Great Lakes NEMA 12 Enclosures | |
NEMA 12 Fan Assembly and Exhaust Filter | N/A | (1) x 368 CFM | Great Lakes NEMA 12 Enclosures | |
NEMA 12 Fan Assembly and Exhaust Filter | N/A | (1) x 38 CFM | Great Lakes Wall Mount NEMA 12 Enclosures | |
Exhaust Chimney Fan Tray - 42" Enclosures | 0U | (2) x 600 CFM | 42" ES Series Racks w/ Optional Chimney | |
Exhaust Chimney Fan Tray - 48" Enclosures | 0U | (2) x 600 CFM | 48" ES Series Racks w/ Optional Chimney | |
High Capacity Exhaust Chimney Fan Tray - 48" Enclosures | 0U | (2) x 1130 CFM | 48" ES Series Racks w/ Optional Chimney | |
Fan Thermostat Controller - 50°-90°F / 10°-30°C Range | - Any fan with a standard US plug (5-15 / 1-15) | |||
Variable Fan Speed Controller - 60 - 100% Speed | - For use with variable speed fans |
Even small server rooms can benefit from environmental monitoring devices. Proper server room monitoring can provide warning of impending disaster that threatens availability and up-time. Temperature sensors can alert IT professionals of over-heating situations, humidity sensors can alert to overly dry/moist conditions, fluid detection sensors can alert to flooding conditions, and intrusion/security sensors can help protect data and valuable IT investments from theft.
Server Rack Online monitoring products provide robust standalone server room monitoring solutions. For smaller spaces with limited future expandability needs. The Netbotz 320 provides integrated environmental monitoring (temperature, humidity, dew point, airflow, door, and audio) with a web interface that provides immediate sensor readings, real-time camera images, and immediate configuration. While the NetBotz 420 offers similar functions for small to medium-sized spaces that require comprehensive monitoring with moderate expandability potential. For larger server room spaces, the docked camera pods and sensor pods of the WallBotz 500 can be placed up to 340 feet from a base station, allowing coverage of multiple rooms or cabinets. An add-on CCTV adapter allows a CCTV camera to be used as well.
Temperature Monitoring
Probably the most widely monitored metric, proper operating temperature plays a crucial role in server availability and up-time. When a cooling failure happens, it does not take long for temperatures to rise and mission-critical equipment to fail. With real-time monitoring, IT professionals can be instantly alerted via e-mail, audible alarm, or other advanced alarm notification system to take immediate action.
Humidity Monitoring
While temperature is closely watched, humidity is often over looked in the server room. Of concern to IT managers are dry conditions that can lead to a build up of static electricity, as well as overly humid conditions that can lead to condensation buildup. To combat electrostatic discharge, cooling systems often add moisture to the conditioned air. Add too much water vapor, though, and IT equipment will collect condensation that may lead to rust and electrical shorts. Real-time monitoring can provide IT professionals and facility managers the information to get the balance right.
Fluid Detection
Little needs to be said about the dangers that fluids pose to IT equipment, yet many small server rooms ignore this ever present danger. Safe from flooding on the third floor? Not from the burst pipe on the fourth. Properly placed fluid detection systems can provide advanced warning of liquid infiltration, allowing ample time for mission-critical systems to be protected.
Security/Intrusion Monitoring
Physical security is paramount to any serious data security program. Beyond external building security, server rack intrusion detection and server floor monitoring offer another level of security that is just as important as firewalls and virus protection. If an intruder can physically access the servers, no data is safe. Intrusion detection systems and camera monitoring solutions can provide another deterrent to data and equipment theft.
Server Room Monitoring Available for All Budgets
Stand-alone sensors need not require huge initial investments and can actually reduce IT expense in the long run when the replacement cost for expensive server room equipment is taken into account. Moreover, many of today's state of the art server room monitoring systems do not need additional computer hardware or software systems and can often be integrated into existing building management and network monitoring systems.
Upsite's EnergyLok Environmental Monitoring Systems (EMS) provides cost-effective monitoring solutions that can be installed across network closets, server rooms, and enterprise data centers.
]]>Server room monitoring is an integral part of any data center management strategy. Real-time monitoring of temperature, humidity, pressure, and security allows ample warning time for server room managers regarding potential threats to availability and up-time. Beyond up-time security, however, server room monitoring systems lead to insights on improving server room efficiency that allows IT professionals to continually optimize their facilities reducing operating costs.
| |||||
| |||||
| |||||
|
Horizontal server / equipment support rails are designed to replace a variety of server rails including OEM rails for Dell, HP, IBM, and Apple servers. They can also be used to mount a variety of other equipment such as computers, KVM switches, medical equipment, UPS backup systems, data backup systems, and custom made equipment. *To mount devices with smaller width onto a flat or vented surface, use server rack shelves. Horizontal equipment rails are typically compatible with any standard 19"EIA rack that supports the minimum mounting depth of the rail kit. Some models also feature native compatibility with 23"EIA and 30"EIA server racks. Equipment rails come in two different types:
| |
10 to 31.75"D Mounting | 28 to 30"D Mounting |
| |||
| |||
| |||
| |||
| |||
|
Most Vertical Server Rack Rails are proprietary, and exclusive to a series of racks or an individual rack. There aren't many universally compatible vertical rails available, however a lot of rack rails can be 'gerry rigged' to fit non-compatible racks with custom drilled holes - please only attempt this with a professional or at your own discretion. To find the specific rails for your rack, please contact us.
Server Enclosure Exhaust Chimney's | Adj. Height | Compatibility |
Great Lakes GL-EC-42-1832 - up to 1200 CFM | 18"- 32" | 42"D Great Lakes ES Server Enclosure |
Great Lakes GL-EC-42- 3246 - up to 1200 CFM | 32"- 46" | 42"D Great Lakes ES Server Enclosure |
Great Lakes GL-EC-48-1832 - up to 1200 CFM | 18"- 32" | 48"D Great Lakes ES Server Enclosure |
Great Lakes GL-ECHF-48-1832 - up to 2260 CFM | 18"- 32" | 48"D Great Lakes ES Server Enclosure |
Great Lakes GL-EC-48-3246 - up to 1200 CFM | 32"- 46" | 48"D Great Lakes ES Server Enclosure |
Great Lakes GL-ECHF-48-3246 - up to 2260 CFM | 32"- 46" | 48"D Great Lakes ES Server Enclosure |
APC AR7751 | 20" - 33.5" | 23"W (600mm) APC NetShelter SX Enclosure |
APC AR7752 | 33.5" - 60" | 23"W (600mm) APC NetShelter SX Enclosure |
APC AR7753 | 20" - 33.5" | 30"W (750mm) APC NetShelter SX Enclosure |
APC AR7754 | 33.5" - 60" | 30"W (750mm) APC NetShelter SX Enclosure |
Server Enclosure Flexible Exhaust Chimney's | Height | Compatibility |
Great Lakes ECD48 - up to 1200 CFM | Up to 5 ft | 48"D Great Lakes ES Server Enclosure |
Great Lakes ECDHF48 - up to 2260 CFM | Up to 5 ft | 48"D Great Lakes ES Server Enclosure |
Mechanical | |
Height | 44mm |
Width | 470mm |
Depth | 660mm |
Weight | 8kgs |
Color | Black |
2U Front flush or center mount 2 post rack mounting kit; 4 piece design
Plexi door, solid sides
]]>This wall mount cabinet is a custom item. Please call 1-866-722-5776 for pricing.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Plexi door, vented sides
]]>This wall mount cabinet is a custom item. Please call 1-866-722-5776 for pricing.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, solid sides
]]>This wall mount cabinet is a custom item. Please call 1-866-722-5776 for pricing.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, vented sides
]]>This wall mount cabinet is a custom item. Please call 1-866-722-5776 for pricing.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Server Rack, Mesh Front & Split Fan Rear Doors, Solid Top and
]]>The Great Lakes ES-Series GL780ES-2448MSFS is a 42U x 24"W x 48"D server rack enclosure.
Dimensions: 78.00″H x 24.00″W x 48.00″D
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers, bolted to floor, or on casters
Shipping Weight: 480 lbs.
Included:
Features:
Server Rack, Mesh Front & Split Mesh Rear Doors, Solid Top an
]]>The Great Lakes ES-Series GL780ES-2448MSS is a 42U x 24"W x 48"D server rack enclosure.
Dimensions: 78.00″H x 24.00″W x 48.00″D
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers, bolted to floor, or on casters
Shipping Weight: 480 lbs.
Included:
Features:
NOTE: The filler panel is made-to-order. Please call 1-866-722-5776 for pricing and lead time.
]]>The Great Lakes 19SRB is a 1RMU heavy duty utility cable strain relief bar consist of a metal bar that mounts to the front or rear of a standard EIA 19" rack to support and maintain proper cable strain of cables, including cables exiting from a patch panel. Cables shall be secured with integrated adjustable clips, hook and loop strips or cable ties.
]]>Dimensions: 84"H x 20.25"W x 14"D
Rack Spaces: 45U, 19" EIA 310-D compliant
Great Lakes GLRR-1984 Features:
Great Lakes GLRR-1984BA Features:
Great Lakes Wall Mount Racks | Height | Depth | Features |
Great Lakes WM Series Wall Mount Cabinets | 12U, 19U, & 25U | 24.5" | center swing-out, simple finger "push-pull" type catch |
Great Lakes NEMA 12 Wall Mount Enclosures | 12U, 19U, & 26U | 24" | Front and rear sections lock independently |
Great Lakes WS Series Wall Mount Cabinets | 11U, 18U, 25U, 38U | 24" | Swings open left or right - no sides |
Great Lakes E-Series Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes GL480E-2432F | 24U | 32" | 19" EIA | 24" |
Great Lakes 4801e-2432 | 24U | 32" | 19" EIA | 24" |
Great Lakes 6001e-2432 | 31U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2432 | 37U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2436 | 37U | 36" | 19" EIA | 24" |
Great Lakes 7201e-2932 | 37U | 32" | 19" EIA | 29" |
Great Lakes 7201e-2936 | 37U | 36" | 19" EIA | 29" |
Great Lakes 7801e-2432 | 41U | 32" | 19" EIA | 29" |
Great Lakes GL780ES-3042MS | 41U | 42" | 19" EIA | 30" |
Great Lakes GL780ES-3042MSS | 41U | 42" | 19" EIA | 30" |
Great Lakes GL780ES-3042MSFS | 41U | 42" | 19" EIA | 30" |
Great Lakes GL780ES-2442MS | 41U | 42" | 19" EIA | 24" |
Great Lakes GL780ES-2442MSS | 41U | 42" | 19" EIA | 24" |
Great Lakes GL780ES-2442MSFS | 41U | 42" | 19" EIA | 24" |
NOTE: The filler panel is made-to-order. Please call 1-866-722-5776 for pricing and lead time.
]]>base unit w/ two pair of M6 rails
]]>Dimensions: 30.00"H x 24.00"W x 32.00"D
Rack Spaces: 13 RMU, 19" EIA 310-D Compliant
Weight Capacity: 300 lbs.
Great Lakes 3001E-2432 Base unit Features:
Great Lakes E-Series Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes 3001e-2432 | 13U | 32" | 19" EIA | 24" |
Great Lakes GL480E-2432F | 24U | 32" | 19" EIA | 24" |
Great Lakes 4801e-2432 | 24U | 32" | 19" EIA | 24" |
Great Lakes 6001e-2432 | 31U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2432 | 37U | 32" | 19" EIA | 24" |
Great Lakes 7201e-2932 | 37U | 32" | 19" EIA | 29" |
Great Lakes 8401e-2432 | 44U | 32" | 19" EIA | 24" |
Great Lakes 8401e-2932 | 44U | 32" | 19" EIA | 29" |
Great Lakes 8401e-2936 | 44U | 32" | 19" EIA | 29" |
Great Lakes ES-Series Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes GL840ES-2442MS | 44U | 42" | 19" EIA | 24" |
Great Lakes 8401es-2442 | 44U | 42" | 19" EIA | 24" |
The Great Lakes CMR-84 is a 45U, 19" EIA 310-D compliant 2 post Cable Management Rack.
Dimensions: 85.50"H x 24.938"W x 15.50"D
Rack Spaces: 45U, 19" EIA 310-D compliant
Weight Capacity: 1,000 lbs.
Great Lakes CMR-84 Features:
base unit w/ two pair of M6 rails
]]>Dimensions: 48.00"H x 24.00"W x 32.00"D
Rack Spaces: 24 RMU, 19" EIA 310-D Compliant
Weight Capacity: 600 lbs.
Great Lakes 4801E-2432 Base Unit Features:
Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together. ES enclosures that are 29" wide will only require a reduced door clearance of 14.25", with the 24" wide enclosures needing only 11.75".
Door Sets come standard with a swing handle and three point latching. Optional handles available (see accessories below).
]]>Dimensions: 80.50″H x 20.60″W x 29.00″D
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant mounting
Weight Capacity: 2000 lbs.; 750 lbs. on casters
Construction: 12 gauge CRS with black powder coat finish
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
NOTE: The filler panel is made-to-order. Please call 1-866-722-5776 for pricing and lead time.
]]>base unit w/ two pair of M6 rails
]]>Dimension: 60"H x 24"W x 32"D
Rack Spaces: 31 RMU, 19" EIA 310-D Compliant
Weight Capacity: 600 lbs.
**Product pictured is with optional accessories added including doors and sides.
Great Lakes 6001E-2432 Base Unit Features:
base unit w/ two pair of M6 rails
]]>Dimension: 72"H x 24"W x 32"D
Rack Spaces: 37 RMU 19" EIA 310-D Compliant
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
Great Lakes 7201E-2432 Base Unit Features:
base unit w/ two pair of M6 rails
]]>Dimension: 72"H x 24"W x 36"D
Rack Spaces: 37 RMU 19" EIA 310-D Compliant
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
Great Lakes 7201E-2436 Base Unit Features:
base unit w/ two pair of M6 rails
]]>Dimension: 72"H x 29"W x 32"D
Rack Spaces: 37 RMU 19" EIA 310-D Compliant
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
Great Lakes 7201E-2932 Base Unit Features:
base unit w/ two pair of M6 rails
]]>Dimension: 72"H x 29"W x 36"D
Rack Spaces: 37 RMU 19" EIA 310-D Compliant
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
Great Lakes 7201E-2936 Base Unit Features:
NOTE: This server rack shelf is made-to-order. Please call 1-866-722-5776 for pricing and lead time.
]]>NOTE: The server rack shelf is made-to-order. Please call 1-866-722-5776 for pricing and lead time.
]]>Great Lakes 7206-PKB-MT Pivoting Keyboard Tray 20.625"W x 9.50"D - 19" Rack Mounting
The Great Lakes 7207-BT is a 20.75"D Stationary Rackmount Shelf for 23" mounting in a server rack.
The Great Lakes 7207-FR-AHD is a 22.25"D Stationary Rackmount Shelf for 23" mounting in a server rack.
The Great Lakes 7207-FRSL-AHD is a 22"D Sliding Rackmount Shelf for 23" mounting in a server rack.
The Great Lakes 7209-N is a set of four adjustable levelers that are 2.50"H.
]]>No. of Receptacles: 16
Type of Receptacles: 5-15R
Type of Plug: 5-15P
Surge: No
Receptacles | Plug |
No. of Receptacles: 16
Type of Receptacles: 5-20R
Type of Plug: 5-20P
Surge: No
Receptacles | Plug |
No. of Receptacles: 16
Type of Receptacles: 5-20R
Type of Plug: L5-20P
Surge: No
Receptacles | Plug |
No. of Receptacles: 24
Type of Receptacles: 5-20R
Type of Plug: L5-30P
Surge: No
Receptacles | Plug |
No. of Receptacles: 16
Type of Receptacles: 5-15R
Type of Plug: 5-15P
Surge: Yes
Receptacles | Plug |
The Great Lakes 7217ECS is a rackmount 220 CFM airflow cooling fan. The ECS enclosure blower features a durable, light weight polymer housing and fits in the bottom of standard EIA-310 compliant cabinets. It draws cool air from beneath the floor and optimally delivers the coldest available air directly to server fronts. The Delphi ECS cooling fan improves air distribution reducing cabinet hotspots up to 15°F, extending server life and minimizing down time. Computational Fluid Dynamics (CFD) modeling reveals dramatic reduction in server air temperatures using the Delphi ECS Enclosure Blower. The unit requires only 2 RMU (or less) of mounting space, allowing remaining space to be used by mission-critical equipment.
]]>These replacement filters are to be used in conjunction with the Delphi Enclosure Blower Filter Assembly Kit.
]]>This Great Lakes rack mount fan tray features (9) 75 CFM Fans and is adjustable front and rear in a 19" EIA server rack.
Rack Space: 2RMU
No. of Receptacles: 8
Type of Receptacles: 5-15R
Type of Plug: 5-15P
Surge: No
NOTE: 16 receptacle model shown for product image
Receptacles | Plug |
Mounting | Rack Mount |
AC Rating Frequency-Hz. | 50/60 HZ |
AC Rating Volts | 125 |
AC Rating Amps. | 15 |
AC Rating Watts. | 1800 |
Circuit Breaker | Green |
On/Off Switch | None |
Over Current Protection | CB |
Power Cable AWG | 14/3 SJT |
Power Cable Length | 15 ft. |
Plug Type | NEMA 5-15P |
Receptacle Type | NEMA 5-15R |
Receptacle Style | Single |
Receptacle Quantity | 6 |
Max. Output per Powerstrip | 15 Amp |
Joule Rating | N/A |
UL Rating | 60950-1 |
Product Warranty-GLCC | 1 year | Certification/Agency Approvals | UR & CSA Approved |
Unit Weight lbs | 5 |
Manufacturered | USA |
No. of Receptacles: 6
Type of Receptacles: 5-15R
Type of Plug: 5-15P
Surge: No
Receptacles | Plug |
No. of Receptacles: 6
Type of Receptacles: 5-20R
Type of Plug: 5-20P
Surge: No
Receptacles | Plug |
No. of Receptacles: 6 front, 8 back
Type of Receptacles: 5-15R
Type of Plug: 5-15P
Surge: Yes
Receptacles | Plug |
Door Sets come standard with a swing handle and three point latching. Optional handles available.
Features:
The Great Lakes 7802EN-32SM is a split mesh steel front / rear door option for 32"W x 78"H (42U) Great Lakes EN-Series server rack enclosures. Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together.
]]>The Great Lakes 7802EN-40SM is a split mesh steel front / rear door option for 40"W x 78"H (42U) Great Lakes EN-Series server rack enclosures. Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together.
]]>Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together. ES enclosures that are 29" wide will only require a reduced door clearance of 14.25", with the 24" wide enclosures needing only 11.75".
Door Sets come standard with a swing handle and three point latching. Optional handles available (see accessories below).
]]>Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together. ES enclosures that are 29" wide will only require a reduced door clearance of 14.25", with the 24" wide enclosures needing only 11.75".
Door Sets come standard with a swing handle and three point latching. Optional handles available (see accessories below).
]]>base unit w/ two pair of M6 rails
]]>Dimensions: 84.00"H x 24.00"W x 32.00"D
Rack Spaces: 44U 19" EIA 310-D Compliant
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
Features:
base unit w/ two pair of M6 rails
]]>Dimensions: 84.00"H x 24.00"W x 36.00"D
Rack Spaces: 44U 19" EIA 310-D Compliant
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
Features:
base unit w/ two pair of M6 rails
]]>Dimension: 84"H x 29"W x 36"D
Rack Spaces: 44 RMU 19" EIA 310-D Compliant
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
Great Lakes 8401E-2936 Base Unit Features:
base unit w/ three pairs of M6 rails
]]>Dimensions: 84.00"H x 24.00"W x 42.00"D
Rack Spaces: 44U 19" EIA 310-D Compliant
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
Features:
base unit w/ two pair of M6 rails
]]>Great Lakes 8401S2-2432 S2 Series Base unit with M6 mounting rails and a package or mounting screws.
Dimensions: 84"H x 22.25"W x 30.375"D
Rack Spaces: 45U 19" EIA 310-D Compliant
Weight Capacity: 1200 lbs.
Features:
NOTE: The server enclosure is made-to-order. Please call 1-866-722-5776 for pricing and lead time.
]]>base unit w/ two pair of tapped 10/32 rails
]]>Great Lakes 8401S2-2436 S2 Series Base unit with tapped 10/32 rails and a package or mounting screws.
Dimensions: 84"H x 22.25"W x 34.375"D
Rack Spaces: 45U 19" EIA 310-D Compliant
Weight Capacity: 1200 lbs.
Features:
NOTE: The server enclosure is made-to-order. Please call 1-866-722-5776 for pricing and lead time.
]]>The Great Lakes 8402EN-32SM is a split mesh steel front / rear door option for 32"W x 84"H (45U) Great Lakes EN-Series server rack enclosures. Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together.
]]>Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together. ES enclosures that are 29" wide will only require a reduced door clearance of 14.25", with the 24" wide enclosures needing only 11.75".
Door Sets come standard with a swing handle and three point latching. Optional handles available (see accessories below).
]]>Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together. ES enclosures that are 29" wide will only require a reduced door clearance of 14.25", with the 24" wide enclosures needing only 11.75".
Door Sets come standard with a swing handle and three point latching. Optional handles available (see accessories below).
]]>Great Lakes E-Series Rack Enclosures | Height | Depth* | Rails | Width* |
Great Lakes 3001e-2432 | 13U | 32" | 19" EIA | 24" |
The Great Lakes 9102EN-32SM is a split mesh steel front / rear door option for 32"W x 91"H (48U) Great Lakes EN-Series server rack enclosures. Split doors require a smaller swing clearance, allowing enclosure aisles to be placed closer together.
]]>The Air Manager uses the Great Lakes concept of "Accelerated Ambient Cooling" to improve the efficiency of the conditioned air available to cool equipment mounted within the enclosure, while nearly eliminating bypass air flow outside the enclosure.
]]>The Air Manager uses the Great Lakes concept of "Accelerated Ambient Cooling" to improve the efficiency of the conditioned air available to cool equipment mounted within the enclosure, while nearly eliminating bypass air flow outside the enclosure.
]]>NOTE: Although equipment may physically fit into a Great Lakes enclosure, with or without brackets, customers must also review and comply with the equipment manufacturer's installation and other requirements. For example, the E and ES Series Enclosures, when in an open frame configuration, can physically support the installation of a Cisco 7018 Series switch; however, the E and ES Series Enclosure frame designs do not provide the airflow space clearance required by Cisco.
NOTE: Great Lakes' EN (Enhanced Networking) Series of enclosures is designed to support the installation of Cisco switches and other side-to-side airflow equipment. The EN Series has the airflow space clearances that are currently required and has accessories (including baffle kits) that are designed to support proper operational conditions. For more information, please contact us.
NOTE: When any equipment or accessory is installed in a Great Lakes product, the installation procedures, recommendations and product warranty requirements of the equipment manufacturer must be followed. Great Lakes will not be responsible for any losses or claims arising from a customer's installation of electrical, electronic or other third party products in any Great Lakes enclosure, unless caused solely by a written configuration prepared by Great Lakes for that customer or by a configuration provided by Great Lakes' website, any configuration relies on complete and accurate information from the customer.
]]>Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
7000 Series | |||||||||
70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
9500 Series | |||||||||
9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
6800 Series | |||||||||
6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
6500 Series | |||||||||
6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
4500 Series | |||||||||
4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch |
The following are the bottom panel options for the Great Lakes cabinet series: (Listed in order shown above)
Bottom Panel, Filtered, 13"W x 16"D w/rear solid panel
Brush Grommet w/rear solid panel
Bottom Panel, Solid, 13"W x 16"D w/rear solid panel
The CH-02 Door Handle features a low-profile, nested handle which contains a three-digit combination lock and master key - Handle may be opened individually via either method. Great Lakes handles are universally interchangable with all Great Lakes E and ES Series doors.
]]>The Great Lakes CM-02 is an 1U Low Density Cable Organizer, 2 front vertical rings (1.80"W x 3.80"D).
]]>
CM-15 side view
The Great Lakes CMR-45U is a 45U, 19" EIA 310-D compliant 2 post Cable Management Rack.
Dimensions: 84"H x 24"W x 21"D
Rack Spaces: 45U, 19" EIA 310-D compliant
Weight Capacity: 1,000 lbs.
Great Lakes CMR-45U Features:
Eight (8) cable rings (2.5"x4")
allow for rotational mounting
Flexible Mounting Profile allows cable fingers (sold separately: ESC-K12-7)
and accessory installation without occupying RMU
Dimensions: 84"H x 24"W x 12"D
Rack Spaces: 45U, 19" and 23" EIA 310-D compliant
Weight Capacity: 2,500 lbs.
SKUs: CMR-45U12-B-1224 for black or CMR-45U12-W-1224 for White
]]>The Great Lakes CWE is a wrench for attaching/removing casters and levelers from a Great Lakes rack
]]>Exhasut chimneys assists in the removal of hot air from the top of 48"D Great Lakes enclosures, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional high capacity GL-ECFT48 fan tray offering 1200 CFM which will accelerate the amount of hot air removed from the enclosure.
Includes: 24" x 24" ceiling panel, high flow enclosure adapter, two 5' sections of double ply black polyester fabric hoses, and four duct collars.
]]>High capacity exhaust chimneys assists in the removal of hot air from the top of 48"D Great Lakes enclosures, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional high capacity GL-ECHFT48 fan tray offering 2260 CFM which will accelerate the amount of hot air removed from the enclosure.
Includes: 24" x 24" ceiling panel, enclosure adapter, two 5' sections of double ply black polyester fabric hoses, and four duct collars.
]]>Great Lakes ES-Series Enclosures |
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
7000 Series | |||||||||
70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
9500 Series | |||||||||
9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
6800 Series | |||||||||
6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
6500 Series | |||||||||
6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
4500 Series | |||||||||
4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch |
Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as Cisco. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side of the equipment. Kits are tool-less and easily attach to rails outside of the EIA mounting profile.
Compatible with Cisco 6500 Series (6506 (-E))
ENSAB11 w/ Cisco Catalyst 6506 Brochure (PDF)
ENSAB11 Technical Specifications (PDF)
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
7000 Series | |||||||||
70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
9500 Series | |||||||||
9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
6800 Series | |||||||||
6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
6500 Series | |||||||||
6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
4500 Series | |||||||||
4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch |
Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as Cisco. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side of the equipment. Kits are tool-less and easily attach to rails outside of the EIA mounting profile.
Compatible with Cisco 6500 Series (6509 (-E)), 9500 Series (9509), 4500 Series (4510R)
ENSAB14 w/ Cisco Catalyst 6509 Brochure (PDF)
ENSAB14 Technical Specifications (PDF)
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
7000 Series | |||||||||
70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
9500 Series | |||||||||
9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
6800 Series | |||||||||
6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
6500 Series | |||||||||
6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
4500 Series | |||||||||
4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch |
Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as Cisco. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side of the equipment. Kits are tool-less and easily attach to rails outside of the EIA mounting profile.
Compatible with Cisco 7000 Series (7009)
ENSAB14A w/ Cisco Nexus 7009 Brochure (PDF)
ENSAB14A Technical Specifications (PDF)
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
7000 Series | |||||||||
70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
9500 Series | |||||||||
9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
6800 Series | |||||||||
6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
6500 Series | |||||||||
6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
4500 Series | |||||||||
4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch |
Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as Cisco. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side of the equipment. Kits are tool-less and easily attach to rails outside of the EIA mounting profile.
Compatible with Cisco 9500 Series (9513)
ENSAB14D w/ Cisco Catalyst 9513 Brochure (PDF)
ENSAB14D Technical Specifications (PDF)
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
7000 Series | |||||||||
70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
9500 Series | |||||||||
9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
6800 Series | |||||||||
6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
6500 Series | |||||||||
6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
4500 Series | |||||||||
4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch |
Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as Cisco. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side of the equipment. Kits are tool-less and easily attach to rails outside of the EIA mounting profile.
Compatible with Cisco 6500 Series (Cisco Catalyst 6513(-E))
ENSAB19 w/ Cisco Catalyst 6513 Brochure (PDF)
ENSAB19 Technical Specifications (PDF)
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
7000 Series | |||||||||
70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
9500 Series | |||||||||
9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
6800 Series | |||||||||
6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
6500 Series | |||||||||
6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
4500 Series | |||||||||
4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch |
Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as Cisco. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side of the equipment. Kits are tool-less and easily attach to rails outside of the EIA mounting profile.
Compatible with Cisco 7000 Series (7018*) *1 Four post mounting is required with a rail placement of 24"
ENSAB25 w/ Cisco Nexus 7018 Brochure (PDF)
ENSAB25 Technical Specifications (PDF)
The Great Lakes FFKN12-A1 is a 230 CFM, 115V Fan Assembly (includes filter) and exhaust filter.
]]>Note: Filters are included
]]>Please Note: This price is for a single filter, not a 5 pack.
]]>Dimensions (HxWxD): 10 x 4.7 x 3.5in. (including mounting bracket)
Thermostat Fan Features:
Variable Speed Fan Features:
The exhaust chimney channels hot air from the top of the enclosure, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional fan tray offering 1200 CFM which will accelerate the amount of hot air removed from the enclosure.
]]>The exhaust chimney channels hot air from the top of the enclosure, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional fan tray offering 1200 CFM which will accelerate the amount of hot air removed from the enclosure.
]]>The exhaust chimney channels hot air from the top of the enclosure, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional fan tray offering 1200 CFM which will accelerate the amount of hot air removed from the enclosure.
]]>The exhaust chimney channels hot air from the top of the enclosure, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional fan tray offering 1200 CFM which will accelerate the amount of hot air removed from the enclosure.
]]>The exhaust chimney channels hot air from the top of the enclosure, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional high capacity fan tray offering 2260 CFM which will accelerate the amount of hot air removed from the enclosure.
]]>The exhaust chimney channels hot air from the top of the enclosure, virtually eliminating any recirculation. The energy efficiency offered can be further enhanced when the chimney is connected to a ducting system which returns hot air to the CRAC unit (creating a closed loop system) or when assisted by an optional high capacity fan tray offering 2260 CFM which will accelerate the amount of hot air removed from the enclosure.
]]>Plexiglas door, vented sides
]]>Dimensions: 24"H x 21.25"W x 18"D
Rack Space: 12U
Weight Capacity: 150 lbs.
Included Features:
Mesh door, vented sides
]]>Dimensions: 24"H x 21.25"W x 18"D
Rack Space: 12U
Weight Capacity: 150 lbs.
Included Features:
Solid door, vented sides
]]>Dimensions: 24"H x 21.25"W x 18"D
Rack Space: 12U
Weight Capacity: 150 lbs.
Included Features:
Great Lakes GL24SR Features:
Note: Mounts to most wall types with 5/16" hardware (not included)
]]>Dimensions: 24.00"H x 20.75"W x 24.00"D
Usable Depth: 22.00"
Rack Spaces: 12 RMU
Weight capacity: 100 lbs.
Shipping weight: 34 lbs.
The SRD Series of Swing Racks is designed to provide a deeper (at 24"D) 19" EIA 310-D compliant solution for the mounting of equipment in an area where physical security is not of issue. They feature a 180° positive stop and weight capacity of 100 lbs. Swing racks are easy to assemble, easy to install and accommodate a variety of accessories.
NOTE: #12-24 screws are included.
]]>Plexiglas door, 12-24 mounting rails
]]>Dimensions: 24"H x 24"W x 32.13"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Mesh door, 12-24 mounting rails
]]>Dimensions: 24"H x 24"W x 32.13"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Solid door, 12-24 mounting rails
]]>Dimensions: 24"H x 24"W x 32.13"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Plexiglas door, vented sides
]]>Dimensions: 24"H x 21.25"W x 24.50"D
Rack Space: 12U
Weight Capacity: 150 lbs.
Included Features:
Mesh door, vented sides
]]>Dimensions: 24"H x 21.25"W x 24.50"D
Rack Space: 12U
Weight Capacity: 150 lbs.
Included Features:
Solid door, vented sides
]]>Dimensions: 24"H x 21.25"W x 24.50"D
Rack Space: 12U
Weight Capacity: 150 lbs.
Included Features:
Mesh door, solid sides
]]>Great Lakes GL24WS-MS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 24"H x 24"W x 24"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Mesh door, vented sides
]]>Great Lakes GL24WS-MV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 24"H x 24"W x 24"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Plexi door, solid sides
]]>Great Lakes GL24WS-PS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 24"H x 24"W x 24"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Plexi door, vented sides
]]>Great Lakes GL24WS-PV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 24"H x 24"W x 24"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, solid sides
]]>Great Lakes GL24WS-SS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 24"H x 24"W x 24"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, vented sides
]]>Great Lakes GL24WS-SV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 24"H x 24"W x 24"D
Rack Spaces: 11U
Weight Capacity: 250 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Great Lakes GL36SR Features:
Note: Mounts to most wall types with 5/16" hardware (not included)
]]>Dimensions: 36.25"H x 20.75"W x 24.00"D
Usable Depth: 22.00"
Rack Spaces: 19 RMU
Weight capacity: 100 lbs.
Shipping weight: 44 lbs.
The SRD Series of Swing Racks is designed to provide a deeper (at 24"D) 19" EIA 310-D compliant solution for the mounting of equipment in an area where physical security is not of issue. They feature a 180° positive stop and weight capacity of 100 lbs. Swing racks are easy to assemble, easy to install and accommodate a variety of accessories.
NOTE: #12-24 screws are included.
]]>Plexiglas door, 12-24 mounting rails
]]>Dimensions: 36" H x 24" W x 32.13" D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Mesh door, 12-24 mounting rails
]]>Dimensions: 36" H x 24" W x 32.13" D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Solid door, 12-24 mounting rails
]]>Dimensions: 36" H x 24" W x 32.13" D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Plexiglas door, vented sides
]]>Dimensions: 36"H x 21.25"W x 24.50"D
Rack Space: 19U
Weight Capacity: 250 lbs.
Included Features:
Mesh door, vented sides
]]>Dimensions: 36"H x 21.25"W x 24.50"D
Rack Space: 19U
Weight Capacity: 250 lbs.
Included Features:
Solid door, vented sides
]]>Dimensions: 36"H x 21.25"W x 24.50"D
Rack Space: 19U
Weight Capacity: 250 lbs.
Included Features:
Mesh door, solid sides
]]>Great Lakes GL36WS-MS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 36"H x 24"W x24"D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Mesh door, vented sides
]]>Great Lakes GL36WS-MV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 36"H x 24"W x24"D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Plexi door, solid sides
]]>Great Lakes GL36WS-PS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 36"H x 24"W x24"D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Plexi door, vented sides
]]>Great Lakes GL36WS-PV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 36"H x 24"W x24"D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, solid sides
]]>Great Lakes GL36WS-SS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 36"H x 24"W x24"D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, vented sides
]]>Great Lakes GL36WS-SV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 36"H x 24"W x24"D
Rack Spaces: 18U
Weight Capacity: 300 lbs.
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Dimensions: 48.00″H x 24.00″W x 32.00″D
Rack Spaces: 24 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black, Advantage Gray, or Nitro Blue
Weight Capacity: 600 lbs.
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Included:
NOTE: Image shown with optional accessories
Great Lakes GL480E-2432F Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers and hardware.
]]>Dimensions: 48.00″H x 24.00″W x 42.00″D (40"D Usable)
Rack Spaces: 24 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL480ES-2442MS Features:
Great Lakes GL48SR Features:
Note: Mounts to most wall types with 5/16" hardware (not included)
]]>Dimensions: 48.50"H x 20.75"W x 24.00"D
Usable Depth: 22.00"
Rack Spaces: 26 RMU
Weight capacity: 100 lbs.
Shipping weight: 54 lbs.
The SRD Series of Swing Racks is designed to provide a deeper (at 24"D) 19" EIA 310-D compliant solution for the mounting of equipment in an area where physical security is not of issue. They feature a 180° positive stop and weight capacity of 100 lbs. Swing racks are easy to assemble, easy to install and accommodate a variety of accessories.
NOTE: #12-24 screws are included.
]]>plexiglas door, 12-24 mounting rails
]]>Dimensions: 48" H x 24" W x 32.13" D
Rack Spaces: 25U
Weight Capacity: 350 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Mesh door, 12-24 mounting rails
]]>Dimensions: 48" H x 24" W x 32.13" D
Rack Spaces: 25U
Weight Capacity: 350 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Solid door, 12-24 mounting rails
]]>Dimensions: 48" H x 24" W x 32.13" D
Rack Spaces: 25U
Weight Capacity: 350 lbs.
Maximum Usable Depth: 30"
Maximum Rail Spacing: 23"
Included Features:
Plexiglas door, vented sides
]]>Dimensions: 48"H x 21.25"W x 24.50"D
Rack Space: 25U
Weight Capacity: 300 lbs.
Included Features:
Mesh door, vented sides
]]>Dimensions: 48"H x 21.25"W x 24.50"D
Rack Space: 25U
Weight Capacity: 300 lbs.
Included Features:
Solid door, vented sides
]]>Dimensions: 48"H x 21.25"W x 24.50"D
Rack Space: 25U
Weight Capacity: 300 lbs.
Included Features:
Mesh door, solid sides
]]>Great Lakes GL48WS-MS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 48"H x 24"W x 24"D
Rack Spaces: 25U
Weight Capacity: 350 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Mesh door, vented sides
]]>Great Lakes GL48WS-MV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 48"H x 24"W x 24"D
Rack Spaces: 25U
Weight Capacity: 350 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Plexi door, solid sides
]]>Great Lakes GL48WS-PS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 48"H x 24"W x 24"D
Rack Spaces: 25U
Weight Capacity: 350 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Plexi door, vented sides
]]>Great Lakes GL48WS-PV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 48"H x 24"W x 24"D
Rack Spaces: 25U
Weight Capacity: 350 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, solid sides
]]>Great Lakes GL48WS-SS Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 48"H x 24"W x 24"D
Rack Spaces: 25U
Weight Capacity: 350 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Solid door, vented sides
]]>Great Lakes GL48WS-SV Wall Mount Enclosure provides 19" 310-D compliant mounting in a heavy-duty distribution enclosure. This durable wall mount enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375" deep center swing section. The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.
Note: Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure. Total width and depth including hinges is 24.875" W and 24.688" D. Casters add 3.625" to the total height.
Dimensions: 48"H x 24"W x 24"D
Rack Spaces: 25U
Weight Capacity: 350 lbs.*
Included Features:
*Maximum weight capacity at minimal deflection. Weight capacities are listed for Wall Mounting only.
]]>Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Mesh Front & Rear Doors, Solid Top & Sides
]]>The Great Lakes ES-Series GL780ES-2442MS is a 42U, 24"W, 42"D server rack enclosure with a solid top panel.
Dimensions: 78.00″H x 24.00″W x 42.00″D
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers, bolted to floor, or on casters
Shipping Weight: 375 lbs.
Included:
Features:
Mesh Front & Split Fan Rear Door, Solid Top & Sides
]]>The Great Lakes ES-Series GL780ES-2442MSFS is a 42U, 24"W server rack enclosure with a solid top panel.
Dimensions: 78.00″H x 24.00″W x 42.00″D
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers, bolted to floor, or on casters
Shipping Weight: 375 lbs.
Included:
Features:
Mesh Front & Split Mesh Rear Door, Solid Top & Sides
]]>The Great Lakes ES-Series GL780ES-2442MSS is a 42U, 24"W server rack enclosure with a solid top panel.
Dimensions: 78.00″H x 24.00″W x 42.00″D
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers, bolted to floor, or on casters
Shipping Weight: 375 lbs.
Included:
Features:
Server Rack, Mesh Front & Rear Doors, Solid Sides and Top
]]>The Great Lakes ES-Series GL780ES-2448MS is a 42U x 24"W x 48"D server rack enclosure.
Dimensions: 78.00″H x 24.00″W x 42.00″D
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers, bolted to floor, or on casters
Shipping Weight: 480 lbs.
Included:
Features:
Mesh Front & Rear Doors, Solid Top & Sides
]]>The Great Lakes ES-Series GL780ES-3042MS is a 42U x 30"W x 42"D server rack enclosure with a solid top panel.
Dimensions: 78.00"H x 30.00"W x 42.00"D
Rack Spaces: 42 RMU, 19" EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
Shipping Weight: 375 lbs.
Included:
Features:
Mesh Front and Split Fan Rear Doors, Solid Top and Sides
]]>The Great Lakes ES-Series GL780ES-3042MSFS is a 42U, 30"W, 42"D server rack enclosure with a solid top panel.
Dimensions: 78.00"H x 30.00"W x 42.00"D
Rack Spaces: 42 RMU, 19" EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
Shipping Weight: 375 lbs.
Included:
Features:
Mesh Front & Split Mesh Rear Door, Solid Top & Sides
]]>The Great Lakes ES-Series GL780ES-3042MSS is a 42U x 30"W x 42"D server rack enclosure with a solid top panel.
Dimensions: 78.00"H x 30.00"W x 42.00"D
Rack Spaces: 42 RMU, 19" EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
Shipping Weight: 375 lbs.
Included:
Features:
Mesh Front & Rear Doors, Solid Sides and Top
]]>The Great Lakes ES-Series GL780ES-3048MS is a 42U x 30"W x 48"D server rack enclosure.
Dimensions: 78.00"H x 30.00"W x 48.00"D
Rack Spaces: 42 RMU, 19" EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
Shipping Weight: 510 lbs.
Included:
Features:
Mesh Front and Split Fan Rear Doors, Solid Sides and Top
]]>The Great Lakes ES-Series GL780ES-3048MSFS is a 42U, 30"W, 48"D server rack enclosure.
Dimensions: 78.00"H x 30.00"W x 48.00"D
Rack Spaces: 42 RMU, 19" EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
Shipping Weight: 510 lbs.
Included:
Features:
Server Rack, Mesh Front & Split Mesh Rear Door, Solid Top and
]]>The Great Lakes ES-Series GL780ES-3048MSS is a 42U x 30"W x 48"D server rack enclosure.
Dimensions: 78.00"H x 30.00"W x 48.00"D
Rack Spaces: 42 RMU, 19" EIA 310-D Compliant
Stock Color: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
Shipping Weight: 510 lbs.
Included:
Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 24.00"W x 42.00"D (40"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-2442MS Features:
ES Server Enclosures:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Fan Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 24.00"W x 42.00"D (40"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-2442MSFS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 24.00"W x 42.00"D (40"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-2442MSS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 24.00"W x 48.00"D (46"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-2448MS Features:
ES Server Enclosures:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Fan Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 24.00"W x 48.00"D (46"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-2448MSFS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 24.00"W x 48.00"D (46"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-2448MSS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 30.00"W x 42.00"D (40"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-3042MS Features:
ES Server Enclosures:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Fan Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 30.00"W x 42.00"D (40"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-3042MSFS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 30.00"W x 42.00"D (40"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-3042MSS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 30.00"W x 48.00"D (46"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-3048MS Features:
ES Server Enclosures:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Fan Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 30.00"W x 48.00"D (46"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-3048MSFS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 79.00"H x 30.00"W x 48.00"D (46"D Usable)
Rack Spaces: 42 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Made In America
Included:
Great Lakes GL790ES-3048MSS Features:
Great Lakes GL8000VHA is a 8000 BTU, 14.7 amp Ice Qube AC unit with 120V power input. The GL8000VHA has been designed for high ambient applications.
Dimensions: 84.00″H x 30.00″W x 36.00″D
Raceway Dimensions: 44.38″H x 5.75″W x 2.75″D (dimensions of both raceways)
Rack Spaces: 21 RMU per compartment (2 compartments)
Weight capacity: 1500 lbs. on levelers, bolted to floor or on caster
Doors: Mesh front and rear doors
Co-Lo Enclosures Features:
Dimensions: 84.00″H x 28.00″W x 36.00″D
Raceway Dimensions: 44.38″H x 5.75″W x 2.75″D (dimensions of both raceways)
Rack Spaces: 21 RMU per compartment (2 compartments)
Weight capacity: 1500 lbs. on levelers, bolted to floor or on caster
Doors: Perimeter vented plexi front door and solid rear door with built in exhaust fan
Co-Lo Enclosures Features:
Dimensions: 84.00″H x 30.00″W x 36.00″D
Raceway Dimensions: 28.50″H x 5.75″W x 2.75″D (dimensions of left raceway), 54.50″H x 5.75″W x 2.75″D (dimensions of right raceway)
Rack Spaces: 14 RMU per compartment (3 compartments)
Weight capacity: 1500 lbs. on levelers, bolted to floor or on caster
Doors: Mesh front and rear doors
NOTE: Side panels are included with this enclosure.
Co-Lo Enclosures Features:
Dimensions: 84.00″H x 24.00″W x 36.00″D
Rack Spaces: 44 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black, Advantage Gray, or Nitro Blue
Weight Capacity: 1500 lbs. on levelers, bolted to floor, or on heavy duty casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Included:
NOTE: Product image shown with optional accessories
Great Lakes GL840E-2436MP Features:
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Dimensions: 84.00″H x 24.00″W x 42.00″D
Rack Spaces: 44 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Enclosure Includes
Great Lakes GL840ES-2442MS Features:
Dimensions: 84.00″H x 24.00″W x 48.00″D
Rack Spaces: 44 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL840ES-2448MS Features:
Dimensions: 84.00″H x 30.00″W x 48.00″D
Rack Spaces: 44 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL840ES-3048MS Features:
In the simplest of terms, the 840EZ Enclosure represents the Great Lakes' equivalent of a seismic rated version of our Enhanced Server (ES) series of enclosures. Now Great Lakes customers can have the same great performance they have come to expect from our ES Server Enclosures, in a Seismic certified package! Compliant, custom variations of this platform including different sizes are also available upon request.
]]>Seismic Zone 4 (GR-63-CORE) Server Rack with seismic sides and top, and Mesh Doors. Hardware Included.
]]>Includes
The Great Lakes GL840N12-2442 is a 45U NEMA Type 12 Server Rack Enclosure. Great Lakes' NEMA 12 Free Standing Enclosures are constructed to be compliant with the National Electrical Manufacturers Association's Type 12 standard. NEMA 12 enclosures are intended for indoor use to provide a degree of protection to the equipment inside the enclosure against dust, falling dirt, water and noncorrosive liquids. These enclosures are also intended to provide a degree of protection to personnel against access to hazardous parts which may be mounted within the enclosure.
Features:
Doors / Fan Exhaust Front & rear door are set up with gasketed gland plates that can be replaced with a NEMA 12 fan with filter on the front door and a filter for airflow on the rear door. Doors will have a heavy duty three point latching system.
Sides / AC Mounting Enclosures will be set up with removable side panel options. Enclosure part number will indicate side panel configuration.
Air Conditioners Optional air conditioners shall have the following standard features:
Full Specifications:
]]>Dust & Water Resistant - NEMA 12, Cable Access Knockouts, two Vertical Lacing Bars, optional Exhaust Fans, "A" Side Panels - mount optional 2500 to 6000 BTU AC Unit
]]>Features:
Doors / Fan Exhaust Front & rear door are set up with gasketed gland plates that can be replaced with a NEMA 12 fan with filter on the front door and a filter for airflow on the rear door. Doors will have a heavy duty three point latching system.
Sides / AC Mounting Enclosures will be set up with removable side panel options. Enclosure part number will indicate side panel configuration.
Air Conditioners Optional air conditioners shall have the following standard features:
Full Specifications:
]]>Dust & Water Resistant - NEMA 12, Cable Access Knockouts, two Vertical Lacing Bars, optional Exhaust Fans, "B" Side Panels - mount optional 8000 to 12,000 BTU AC Unit
]]>Features:
Doors / Fan Exhaust Front & rear door are set up with gasketed gland plates that can be replaced with a NEMA 12 fan with filter on the front door and a filter for airflow on the rear door. Doors will have a heavy duty three point latching system.
Sides / AC Mounting Enclosures will be set up with removable side panel options. Enclosure part number will indicate side panel configuration.
Air Conditioners Optional air conditioners shall have the following standard features:
Full Specifications:
]]>Dust & Water Resistant - NEMA 12, Cable Access Knockouts, two Vertical Lacing Bars, optional Exhaust Fans
]]>Features:
Doors / Fan Exhaust Front & rear door are set up with gasketed gland plates that can be replaced with a NEMA 12 fan with filter on the front door and a filter for airflow on the rear door. Doors will have a heavy duty three point latching system.
Sides / AC Mounting Enclosures will be set up with removable side panel options. Enclosure part number will indicate side panel configuration.
Air Conditioners Optional air conditioners shall have the following standard features:
Full Specifications:
]]>Dust & Water Resistant - NEMA 12, Cable Access Knockouts, two Vertical Lacing Bars, optional Exhaust Fans, "A" Side Panels - mount optional 2500 to 6000 BTU AC Unit
]]>Features:
Doors / Fan Exhaust Front & rear door are set up with gasketed gland plates that can be replaced with a NEMA 12 fan with filter on the front door and a filter for airflow on the rear door. Doors will have a heavy duty three point latching system.
Sides / AC Mounting Enclosures will be set up with removable side panel options. Enclosure part number will indicate side panel configuration.
Air Conditioners Optional air conditioners shall have the following standard features:
Full Specifications:
]]>Dust & Water Resistant - NEMA 12, Cable Access Knockouts, two Vertical Lacing Bars, optional Exhaust Fans, "B" Side Panels - mount optional 8000 to 12,000 BTU AC Unit
]]>Features:
Doors / Fan Exhaust Front & rear door are set up with gasketed gland plates that can be replaced with a NEMA 12 fan with filter on the front door and a filter for airflow on the rear door. Doors will have a heavy duty three point latching system.
Sides / AC Mounting Enclosures will be set up with removable side panel options. Enclosure part number will indicate side panel configuration.
Air Conditioners Optional air conditioners shall have the following standard features:
Full Specifications:
]]>Dust & Water Resistant - NEMA 12, Cable Access Knockouts, two Vertical Lacing Bars, optional Exhaust Fans
]]>Features:
Dimensions: 84.00″H x 28.00″W x 36.00″D
Raceway Dimensions: 28.50″H x 5.75″W x 2.75″D (dimensions of left raceway), 54.50″H x 5.75″W x 2.75″D (dimensions of right raceway)
Rack Spaces: 14 RMU per compartment (3 compartments)
Weight capacity: 1500 lbs. on levelers, bolted to floor or on caster
Doors: Perimeter vented plexi front door and solid rear door with built in exhaust fan
NOTE: Side panels are included with this enclosure
Co-Lo Enclosures Features:
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
No sides or Doors. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top & Sides, Mesh Front & Split Rear. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Cooling Options
Filler panels and brush grommet kits to prevent bypass airflow within the enclosure
Great Lakes Baffle Kits create proper airflow for switches, and side-to-side airflow equipment, as suggested by manufactures such as Cisco Nexus or Catalyst Switches. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side. Kits are tool-less and easily attach to rails outside of EIA mounting profile.
Ganged Enclosure
EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure.
Power & Grounding
Cable Management "Fingers"
Additional Cable Management
Optional Accessories include:
Solid Top, Mesh Front & Split Rear, No Sides. Includes: Levelers, Grounding Kit, and Cable Management Fingers
]]>EN Enclosures are designed with built-in features to manage high-density cable management applications of switches and servers. Knockouts and openings for top and bottom cable access. Repositionable finger sections along each rails. Features open side area to accommodate large bundles within and between ganged enclosures. The EN ships completely assembled and is ready for immediate use!
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 24.00″W x 42.00″D (40"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-2442MS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 24.00″W x 42.00″D (40"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-2442MSS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 24.00″W x 48.00″D (46"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-2448MS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 24.00″W x 48.00″D (46"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-2448MSS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 30.00″W x 42.00″D (40"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-3042MS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 30.00″W x 42.00″D (40"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-3042MSS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 30.00″W x 48.00″D (46"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-3048MS Features:
Rails
Frame
Cooling Solutions (Optional)
Cable Management Solutions (Optional)
Mesh Front, Split Mesh Rear, Solid Top, Solid Sides. Includes Levelers, PDU brackets, and hardware.
]]>Dimensions: 91.00″H x 30.00″W x 48.00″D (46"D Usable)
Rack Spaces: 48 RMU, 19″ EIA 310-D Compliant
Stock Colors: Black (optional white and custom colors available)
Weight Capacity: 2000 lbs. on levelers or bolted to floor, 1800 lbs. on casters
UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
Compliance: RoHS compliant
Included:
Great Lakes GL910ES-3048MSS Features:
The Great Lakes HDW-105-25 is a Package of 25 M6 Cage Nuts with Screws, 12mm screw length.
]]>The Great Lakes HDW-106-25 is a Package of 25 Cage Nuts with #10-32 Screws.
]]>Great Lakes Enhanced Series 13U to 45U, 30"D to 36"D cabinet leveler options:
Note: When casters & levelers are used together, 4" levelers are required.
Great Lakes Server Enclosures, 44U, 42"D leveler options:
Cable trays and ladder rack can easily be supported with Great Lakes fixed height ladder rack brackets. Brackets easily attach to the top of Great Lakes Enclosures (creating an even path across enclosures of the same height) to facilitate overhead cabling. No infrastructure changes or additional supports for the ceiling are needed, as traditionally found when hanging baskets from the ceiling. needed!
]]>Cable trays and ladder rack can easily be supported with Great Lakes adjustable height ladder rack brackets. Brackets easily attach to the top of Great Lakes Enclosures (creating an even path across enclosures of the same height) to facilitate overhead cabling. No infrastructure changes or additional supports for the ceiling are needed, as traditionally found when hanging baskets from the ceiling. needed!
]]>Cable trays and ladder rack can easily be supported with Great Lakes adjustable height ladder rack brackets. Brackets easily attach to the top of Great Lakes Enclosures (creating an even path across enclosures of the same height) to facilitate overhead cabling. No infrastructure changes or additional supports for the ceiling are needed, as traditionally found when hanging baskets from the ceiling. needed!
]]>Cable trays and ladder rack can easily be supported with Great Lakes fixed height ladder rack brackets. Brackets easily attach to the top of Great Lakes Enclosures (creating an even path across enclosures of the same height) to facilitate overhead cabling. No infrastructure changes or additional supports for the ceiling are needed, as traditionally found when hanging baskets from the ceiling. needed!
]]>Cable trays and ladder rack can easily be supported with Great Lakes adjustable height ladder rack brackets. Brackets easily attach to the top of Great Lakes Enclosures (creating an even path across enclosures of the same height) to facilitate overhead cabling. No infrastructure changes or additional supports for the ceiling are needed, as traditionally found when hanging baskets from the ceiling. needed!
]]>Cable trays and ladder rack can easily be supported with Great Lakes adjustable height ladder rack brackets. Brackets easily attach to the top of Great Lakes Enclosures (creating an even path across enclosures of the same height) to facilitate overhead cabling. No infrastructure changes or additional supports for the ceiling are needed, as traditionally found when hanging baskets from the ceiling. needed!
]]>Using two single-sided relay rack shelves together to create a more sturdy custom solution.
]]>
Use two single-sided relay rack shelves together to create a more sturdy custom solution.
]]>
Great Lakes 7206-FRSLA-300 Heavy Duty Sliding shelf - 19" Rack Mounting
Great Lakes Cable Management Relay Rack | Height | Depth | Rails | Width |
Great Lakes CMR-45U12 | 45U | 21" | 19" EIA | 12" |
Great Lakes Relay Racks | Height | Depth | Rails | Width |
Great Lakes glrr-1984 | 45U | 14" | 19" EIA | 20.25" |
Great Lakes glrr-1984ba | 45U | 15.5" | 19" EIA | 24.938" |
Great Lakes S2 Sound and Security enclosure series is designed for the broadcast, video, audio, security, networks, and communication industry.
]]>Great Lakes Side Airflow Plenum Kit (SAFPL) allows you to mount your servers and side-to-side airflow equipment with ease.Great Lakes’ Side Airflow Plenum Kit (SAFPL) utilizes brush grommet as air-dams along the front left & right rails. One vertical dam installs along the right rear to prevent recirculation of any hot air. Two verticals are installed on the top & bottom of the right side of the equipment, creating an intake channel on the right side to draw air directly from the cold aisle. The left vertical dam seals the left side of the cabinet, directing exhaust air toward the hot aisle, protecting against recirculation.
Side-to-Side cooled equipment is often found in today’s modern data center. This design type poses unique cooling challenges, especially in server cabinets. Most server cabinets are designed around front-to-back airflow in which cool air is taken from the front of the cabinet and the hot exhaust is ejected through the back of the enclosure. Side-to-side airflow requires a cool air intake from right to left.
Includes: 2 full-length air damns with brackets; 2 sectional vertical air-dams with brackers, 3 horizontal air damns (for air channels), and assembly hardware
]]>Great Lakes Side Airflow Plenum Kit (SAFPL) allows you to mount your servers and side-to-side airflow equipment with ease.Great Lakes’ Side Airflow Plenum Kit (SAFPL) utilizes brush grommet as air-dams along the front left & right rails. One vertical dam installs along the right rear to prevent recirculation of any hot air. Two verticals are installed on the top & bottom of the right side of the equipment, creating an intake channel on the right side to draw air directly from the cold aisle. The left vertical dam seals the left side of the cabinet, directing exhaust air toward the hot aisle, protecting against recirculation.
]]>
Both types of side panels from Great Lakes, Solid & Louvered, are locking lift-off panels and are only sold in pairs.
]]>The ES server enclosure is designed to accommodate high density cable management, cooling, and power needs. Great Lakes Vertical Cable Troughs are made for those cable management needs.
Formed from a single sheet of 14 gauge, cold rolled steel, the VCT-78 provides fingers and attachment points for additional cable management within the enclosure. When used with an 84"H x 48"D enclosure, up to three troughs can be mounted in each rear corner; two troughs in each corner when using 42"D enclosures. A combination of cable troughs and power strips can also be mounted.
Great Lakes also offers an easy-to-install 16 gauge VCT cover (VCT-78C) to provide a clean and seamless look to any enclosure.
]]>Great Lakes VCT-78C is an easy-to-install 16 gauge cover for the VCT-78 Vertical Cable Through to provide a clean and seamless look to any enclosure.
]]>The Great Lakes VCB-4836 is a Vertical Lacing Bar Kit for the 480ES enclosure - Includes 1 vertical and 2 horizontal lacing bars, and six, 12"L cinch straps). Vertical bars are independent of enclosure rails; adjustable, front to rear.
]]>The Great Lakes VLB-8436 is a Vertical Lacing Bar Kit for 840E-36 and 840ES enclosures - Includes 1 vertical and 2 horizontal lacing bars, and six, 12"L cinch straps). Vertical bars are independent of enclosure rails; adjustable, front to rear.
]]>Great Lakes Wall Mount Racks | Height | Depth | Features |
Great Lakes WE Series Wall Mount Racks | 10U | 20.5" | Server side mount wall mount cabinet |
Great Lakes WM Series Wall Mount Racks | 12U, 19U, & 25U | 24.5" | Center swing-out, simple finger "push-pull" type catch |
Great Lakes WD Series Wall Mount Racks | 11U, 18U, & 25U | 32" | Allows removal of the rear section for easy installation |
Great Lakes NEMA 12 Wall Mount Racks | 12U, 19U, & 26U | 24" | Front and rear sections lock independently |
Great Lakes Wall Mount Swing Racks | 12U, 19U, & 26U | 18" & 24" | Swings open left or right - no sides |
Great Lakes Wall Rack Mount Boxes | 2U & 4U | 21.63" | Center swing-out - 19" EIA 310-D compliant; optional casters |
WD Series Wall Mount Cabinet Features:
Great Lakes WD Series Wall Mount Cabinets | |||
Part Number | Height | Depth | Front Door |
GL24WD | 11U | 30" | Plexi |
GL24WDS | 11U | 30" | Solid |
GL24WDM | 11U | 30" | Mesh |
GL36WD | 18U | 30" | Plexi |
GL36WDS | 18U | 30" | Solid |
GL36WDM | 18U | 30" | Mesh |
GL48WD | 25U | 30" | Plexi |
GL48WDS | 25U | 30" | Solid |
GL48WDM | 25U | 30" | Mesh |
Mesh doors, servers side mount
]]>
Great Lakes GL24WE With Front Panel Closed
WM Series Wall Mount Rack Features:
Great Lakes WM Series Wall Mount Cabinets | |||
Part Number | Height | Depth | Front Door |
GL2418WM | 12U | 18" | Plexi |
GL2418WMS | 12U | 18" | Solid |
GL2418WMM | 12U | 18" | Mesh |
GL24WM | 12U | 24" | Plexi |
GL24WMS | 12U | 24" | Solid |
GL24WMM | 12U | 24" | Mesh |
GL36WM | 19U | 24" | Plexi |
GL36WMS | 19U | 24" | Solid |
GL36WMM | 19U | 24" | Mesh |
GL48WM | 25U | 24" | Plexi |
GL48WMS | 25U | 24" | Solid |
GL48WMM | 25U | 24" | Mesh |
Great Lakes WR2 Features:
Great Lakes WR4 Features:
Great Lakes WS Series of wall mount/swing-out enclosures provide 19" EIA 310-D compliant mounting in a heavy-duty distribution enclosure.
WS Series Features:
11U - Great Lakes WS Series Wall Mount Cabinets | ||||
Part Number | Height | Depth | Front Door | Side Panels |
GL24WS-SS | 11U | 24" | Solid | Solid |
GL24WS-SV | 11U | 24" | Solid | Vented |
GL24WS-PS | 11U | 24" | Plexi | Solid |
GL24WS-PV | 11U | 24" | Plexi | Vented |
GL24WS-MS | 11U | 24" | Mesh | Solid |
GL24WS-MV | 11U | 24" | Mesh | Vented |
18U - Great Lakes WS Series Wall Mount Cabinets | ||||
Part Number | Height | Depth | Front Door | Side Panels |
GL36WS-SS | 18U | 24" | Solid | Solid |
GL36WS-SV | 18U | 24" | Solid | Vented |
GL36WS-PS | 18U | 24" | Plexi | Solid |
GL36WS-PV | 18U | 24" | Plexi | Vented |
GL36WS-MS | 18U | 24" | Mesh | Solid |
GL36WS-MV | 18U | 24" | Mesh | Vented |
25U - Great Lakes WS Series Wall Mount Cabinets | ||||
Part Number | Height | Depth | Front Door | Side Panels |
GL48WS-SS | 25U | 24" | Solid | Solid |
GL48WS-SV | 25U | 24" | Solid | Vented |
GL48WS-PS | 25U | 24" | Plexi | Solid |
GL48WS-PV | 25U | 24" | Plexi | Vented |
GL48WS-MS | 25U | 24" | Mesh | Solid |
GL48WS-MV | 25U | 24" | Mesh | Vented |
Great Lakes new Zero-U Mounting Brackets allow you to mount your 19" power strips vertically to save RMU space! Set of two mounting brackets to allow the vertical mounting of 19" EIA equipment (such as power strips), cable organizers, and power strips. Brackets mount to Great Lakes flexible mounting profile, a series of holes outside of the EIA pattern.
]]>Great Lakes new Zero-U Mounting Brackets allow you to mount your 19" power strips vertically to save RMU space! Set of two mounting brackets to allow the vertical mounting of 19" EIA equipment (such as power strips), cable organizers, and power strips. Brackets mount to Great Lakes flexible mounting profile, a series of holes outside of the EIA pattern.
]]>Specifications
This 4ft Aluminum Black Relay Rack has a 19" EIA width and side rails are with EIA 12-24 tapped with countersunk spacing. It features heavy duty base angles and the dual purpose base angles can be bolted down, or installed free-standing.
Specifications:
This 4ft Aluminum Relay Rack has a 19" EIA width and side rails are with EIA 12-24 tapped with countersunk spacing. It features heavy duty base angles and the dual purpose base angles can be bolted down, or installed free-standing.
Specifications:
This 7ft Aluminum Black Relay Rack has a 19" EIA width and side rails are with EIA 12-24 tapped with countersunk spacing. It features heavy duty base angles and the dual purpose base angles can be bolted down, or installed free-standing.
Specifications:
Specifications:
Specifications:
Heavy Duty Base Angles | Dual Purpose Base Angles |
Adjustable from 24"-36" Deep |
This 24U (4ft), 4 post server rack can be mounted with all standard rack or cabinet mount shelves, panels, or cable management accessories. The width is fixed at 19" wide, and the depth is adjustable from 24" to 36" deep in 1" increments by loosening 4 screws.
Specifications:
Heavy Duty Base Angles | Dual Purpose Base Angles |
Adjustable from 24"-36" Deep |
Application Example
Features:
This rail kit includes:
Please note: the 34-102100 is also known as the 34-102100-GRU1K.
]]>Both 10-32 and 12-24 mounting screw kits are included to allow mounting on either thread pattern.
Application Example
Specifications:
Specifications:
NOTE: 2-piece shelf. Each piece is 10" deep, and fit together perfectly on a rack as a single 20" deep shelf. They are a heavy-duty design, and support the most load rating when properly mounted.
This shelf also goes by the MPN: 34-104410-MILL
]]>Dimensions: 19.25" x 14" x 3.5"
Maximum Load: 75 lbs
Specifications:
This shelf also goes my the MPN: 34-105010-MILL
]]>Specifications:
Mechanical | |
Height | 2 in. (51 mm.) |
Width | 19.25 in. (488.95 mm.) |
Depth | 8.5 in. (229 mm.) |
Rack Spaces | 1U |
Load Rating | 37 lbs. (17 kg.) |
Mechanical | |
Material | 14 AWG CSR Steel |
Finish | Satin Black |
Note: Hardware Pack Included- Both 10-32 and 12-24 Phillips Screws are included with protective washers
]]>This keyboard shelf will fit all standard 19" EIA upright relay racks. Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern. The shelf occupies 2 Rack Spaces. The shelves are made from premium 16 gauge steel finished in a satin black industrial coating. The mouse pad includes a satin textured pad finish surface and can be mounted on either the left or right side. The keyboard shelf slides are ball self lubricating ball bearing and include a positive click stop upon extension which prevents the shelf from unwanted retracting.
This unit is made of up two shelf surfaces:
Dimensions: 19.25" x 14" x 3.5"
Maximum Load: 50 lbs
This 19" x 14" keyboard shelf fits onto racks and cabinets and provides a retractable mounting tray for both a keyboard and mouse. Allows easy access to both a keyboard and mouse, plus it comes with both 10-32 and 12-24 mounting screw kits. Provides space for both a standard mouse and keyboard.
Also known as the Gruber 34-105040-GRU1K
]]>Dimensions: 19.25" x 14" x 3.5"
Maximum Load Rating: 50 lbs
This shelf will fit all standard 19" EIA upright relay racks or cabinets. Both 10-32 and 12-24 mounting screw kits are included allowing mount on either thread pattern. The shelf occupies 2 Rack Spaces. The shelves are made from premium 16 gauge steel finished in a satin black industrial coating.
Dimensions: 19.25" x 19" x 3.5"
Maximum Load Rating: 75 lbs
Specifications:
34-105410-GRU1M was formerly known as the 34-105410-Mill.
]]>Applications include shelf mounting heat sensitive hardware such as:
Dimensions: 19.25" x 19" x 3.5"
Maximum Load Rating: 75 lbs
Mechanical | |
Height | 3.5 in. (88.9 mm.) |
Width | 19.25 in. (488.95 mm.) |
Depth | 24 - 36 in. (610 - 914 mm.) |
Rack Spaces | 2U |
Load Rating | 200 lbs. (91 kg.) |
Mechanical | |
Material | 16 AWG CSR Steel |
Finish | Satin Black |
Note: Hardware Pack Included- Both 10-32 and 12-24 Phillips Screws are included with protective washers
]]>Adjustable Mounting Section Detail- This shelf will adjust from 18" deep to 24" deep four post mounting rails | Fully Retracted Position- The shelf slides are ball self lubricating ball bearing style providing smooth and solid shelf extension and retraction |
Specifications:
Mechanical | |
Height | 1.75 in. (44.45 mm.) |
Width | 19 in. (483 mm.) |
Depth | 18 - 24 in. (457 - 610 mm.) |
Rack Spaces | 1U |
Load Rating | 100 lbs. (45 kg.) |
Mechanical | |
Material | 14 AWG CSR Steel |
Finish | Satin Black |
Note: Hardware Pack Included- Both 10-32 and 12-24 Phillips Screws are included with protective washers.
Please Note: Part Number 34-105800 is temporarily unavailable.
]]>This pair of swinging patch panel mount hinges allow access to the back of the patch panel or other lightweight equipment on both 19" and 23" racks. A full set of both 10-32 and 12-24 hardware is included to ensure compatibility with your rack.
Product Specifications:
Mechanical | |
Height | 3.5 in. (8.9 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 8 in. (20 cm.) |
Rack Units | 2U |
Cable Capacity | 200 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
Mechanical | |
Height | 3.5 in. (8.9 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 4 in. (10 cm.) |
Rack Units | 2U |
Cable Capacity | 200 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
Mechanical | |
Height | 1.75 in. (4.45 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 4 in. (10 cm.) |
Rack Units | 1U |
Cable Capacity | 60 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
Mechanical | |
Height | 3.5 in. (8.9 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 8 in. (20 cm.) |
Rack Units | 2U |
Cable Capacity | 600 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
**Based on average cable diameter or 0.225"
]]>**Based on average cable diameter or 0.225"
]]>**Based on average cable diameter or 0.225"
]]>**Based on average cable diameter or 0.225"
]]>**Based on average cable diameter or 0.225"
]]>**Based on average cable diameter or 0.225"
]]>Mechanical | |
Height | 3.5 in. (8.9 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 8 in. (20 cm.) |
Rack Units | 2U |
Cable Capacity | 300 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
Mechanical | |
Height | 1.75 in. (4.45 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 4 in. (10 cm.) |
Rack Units | 1U |
Cable Capacity | 150 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
Mechanical | |
Height | 1.75 in. (4.45 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 4 in. (10 cm.) |
Rack Units | 1U |
Cable Capacity | 150 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
Mechanical | |
Height | 3.5 in. (8.9 cm.) |
Width | 19.25 in. (48.90 cm.) |
Depth | 8 in. (20 cm.) |
Rack Units | 2U |
Cable Capacity | 600 (Based on average cable diameter or 0.225") |
Mechanical | |
Material | CSR Steel |
Finish | Satin Black |
Features:
Features:
Battery Type | 12V, 10AH |
Capacity | |
20 hour rate (525mA) | 10Ah |
10 hour rate (980 mA) | 9.80Ah |
5 hour rate (1.79A) | 8.95Ah |
1 hour rate (6.59A) | 6.59Ah |
15 min rate (21A) | 5.25Ah |
Dimensions | |
Length | 151mm (5.95in) |
Width | 65mm (2.56in) |
Height | 111mm (4.37in) |
Total Height | 117mm (4.61in) |
Approx Weight | 7.06 Lbs.(3.20kg) |
Current | Maximum Discharge Current for 5 seconds: 150A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 22 mΩ |
Container Material | ABS |
Terminal | F2 |
Gruber 58AGPS-12-10-F2:
|
Battery Type | 12V, 12AH |
Capacity | |
20 hour rate (0.60A) | 12Ah |
10 hour rate (1.12A) | 11.20Ah |
5 hour rate (2.03A) | 10.20Ah |
3 hour rate (2.98A) | 8.90Ah |
1 hour rate (7.49A) | 7.49Ah |
Dimensions | |
Length | 151mm (5.95in) |
Width | 98mm (3.86in) |
Height | 95mm (3.74in) |
Total Height | 101mm (3.98in) |
Approx Weight | 8.38 Lbs.(3.80kg) |
Current | Maximum Discharge Current for 5 seconds: 180A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 14 mΩ |
Container Material | ABS |
Terminal | F2 |
Compatible UPS Units - Battery Cross Reference
Conext: 900 AVR Deltec: PRA 1000, PRC 1000, PRM 700, Fenton: PowerPal L1000, PowerPal L1000X, PowerPal L1400, PowerPal L1400X NCR: 4070-0700-7194S (700VA) | OptiUPS: 1000ES, 1000PS, 1400E, 650E, 650ES Parasystems: MBK 300, MPK 320, PRO 1000, PRO 2200R, PRO 700 Unisys: UP910 |
Gruber 58AGPS-12-12-F2:
|
Battery Type | 12V, 18AH |
Capacity | |
20 hour rate (900mA) | 18Ah |
10 hour rate (1.67A) | 16.7Ah |
5 hour rate (3.03A) | 15.1Ah |
3 hour rate (4.49A) | 13.5Ah |
1 hour rate (11.1A) | 1.11Ah |
Dimensions | |
Length | 181mm (7.14in) |
Width | 77mm (3.036in) |
Height | 167mm (6.59in) |
Approx Weight | 12.57 Lbs.(5.7kg) |
Current | Maximum Discharge Current for 5 seconds: 270A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 16 mΩ |
Container Material | ABS |
Terminal | F3 |
Compatible UPS Units - Battery Cross Reference
Alpha Technologies: UPS 1000, UPS 1500, UPS 2000, UPS 2200, UPS 600 APC: 3000UPS, 5000UPS Best: FE 1.8kVA, FE 3.1kVA, Fortress LI 1.3kVA, Fortress LI 1.42kVA, ME 1.8kVA Compaq: R6000 Data Shield: AT 800 (2), ST 450, ST 550 (2), ST 675, ST 900, Turbo 2+, Turbo 2-350, XT 300 | Deltec: PRA 1500, PRA 2000, PRM 600 Oneac: One600X (Battery Pack) Parasystems: CP10K, PRO 1400, PRO BP-RL (Battery Pack) Unisys: UP914 |
Battery Type | 12V, 6AH |
Capacity | |
20 hour rate (300mA) | 6Ah |
10 hour rate (558 mA) | 5.58Ah |
5 hour rate (1.01A) | 5.05Ah |
3 hour rate (1.47A) | 4.41Ah |
1 hour rate (3.64A) | 3.64Ah |
Dimensions | |
Length | 90mm (3.54in) |
Width | 70mm (2.76in) |
Height | 101mm (3.98in) |
Total Height | 107mm (4.21in) |
Approx Weight | 4.15 Lbs.(1.88kg) |
Current | Maximum Discharge Current for 5 seconds: 90A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 25 mΩ |
Container Material | ABS |
Terminal | F2 |
Compatible UPS Units - Battery Cross Reference
Belkin: R3000, F6H500 Best: Fortress LI 360, Fortress LI 460, Patriot Ferrups - F6H500 Clary Corp: DT1500 Compaq: UPS6000 Conext: CNB300, CNB500 CyberPower: CPS375-SL Deltec: ET 1500 Fenton: PowerOffice S300A, PowerPal L280, PowerPal L660 OptiUPS: 500PS | Parasystems: PRO 200 PowerVar: ABCE 350-11 Powerware: One-UPS, Prestige 2000, Prestige 3000, Prestige 6000, Prestige 650, Prestige 800 SL Waber: PowerHouse 250, PowerHouse 280, PowerHouse 320, PowerHouse 500, PowerHouse 550, PowerHouse 650, UPS 500 Toshiba: 1200VA TrippLite: BC 280 Unison: 600, DP400, DP600, DP800 UPSonic: PC Might 25 |
Gruber 58AGPS-12-6-F2:
|
Battery Type | 12V, 7AH |
Capacity | |
20 hour rate (350mA) | 7Ah |
10 hour rate (650 mA) | 6.50Ah |
5 hour rate (1.19A) | 5.95Ah |
1 hour rate (4.40A) | 4.40Ah |
15 min rate (13.7A) | 3.42Ah |
Dimensions | |
Length | 151mm (5.95in) |
Width | 65mm (2.54in) |
Height | 94mm (3.70in) |
Total Height | 10mm (3.90in) |
Approx Weight | 5.20 Lbs.(2.36kg) |
Current | Maximum Discharge Current for 5 seconds: 105A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 23 mΩ |
Container Material | ABS |
Terminal | F2 |
Compatible UPS Units - Battery Cross Reference
AT&T : AT&T Belkin: F6C800-UNV, F6H650, Pro F6C325, Pro F6C425, Pro F6C525, Pro F6C625, Pro F6C625 Best: Fortress II - LI 1020, Fortress II - LI 520, Fortress II - LI 720, Fortress Rack Mount - LI 750, Fortress LI 660, Fortress LI 675, Patriot Ferrups - F6C800-UNV, Patriot Ferrups - F6H650 Clary Corp: I1250VA, UPS1-1K-1G, UPS1-1k-1G Compaq: UPS3000 CyberPower: CPS500-SL, CPS575-SL, CPS585-AVR, CPS625-AVR, CPS650-SL, CPS700-AVR Data Shield: ST 360 Deltec: PRA 400, PRA 600, PRB 220, PRB 300, PRM 450, RS-21, RS-32 Fenton: M1000, M2000, M3000, PowerPal L425, PS60 Hewlett Packard: HP 1000, PowerWise 1000, PowerWise 1250, PowerWise L600, PowerWise L900 Intellipower: IQ 1100RM-2U Merich: 350, 400, 850C, M1200, UPS400 | NCR: 4071-0600-7194 (600VA) Oneac: ON1300, ON2000, ON900, ONe300D, ONe400D, One600X OptiUPS: 280ES, 350VS, 420E, 500VS, 800PS Parasystems: A300, A425, A750, CP1K, CP2K, MCP 6000, MPK 520, PML1250, PML600, PML900, PRO 1000R, PRO 1400R, PRO 280, PRO 320, PRO 420, PRO 520, PRO 650, PRO 700R PCM PowerCom: KIN-1000AP, KIN-625AP, UPS 1200A PK Electronics: Blackout Buster Powerware: PW 3115-300, PW 5105-450 SL Waber: PowerHouse 350 Sola: 0510-0900U, 600VA, N900, S1400R, S31000, S31000R, S3700, S3700R, S41000, S41000TRM, S41500TRM, S4700 Toshiba: 1000VA, 1500VA, 600VA, 800VA TrippLite: BC 400, BC PERS420 Unison: MPS1200, MPS1500, PS60 UPSonic: LAN 100, LAN 150, PC Might 35, PC Might 55, Staion 140, Staion 28, Staion 60 Zapotech: AT&T 515, RX-510N |
Gruber 58AGPS-12-7-F2:
|
Battery Type | 12V, 9AH |
Capacity | |
20 hour rate (450mA) | 9Ah |
10 hour rate (831 mA) | 8.31Ah |
5 hour rate (1.51A) | 7.55Ah |
1 hour rate (4.40A) | 4.40Ah |
Dimensions | |
Length | 151mm (5.95in) |
Width | 65mm (2.56n) |
Height | 94mm (3.70in) |
Total Height | 99mm (3.90in) |
Approx Weight | 5.40 Lbs.(2.45kg) |
Current | Maximum Discharge Current for 5 seconds: 135A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 17 mΩ |
Container Material | ABS |
Terminal | F2 |
Gruber 58AGPS-12-9-F2:
|
Battery Type | 6V, 12AH |
Capacity | |
20 hour rate (0.6A to 5.25V) | 12Ah |
10 hour rate (1.2A to 5.25V) | 12Ah |
5 hour rate (2.04A to 5.25V) | 10.2Ah |
Dimensions | |
Length | 151mm (5.94in) |
Width | 51mm (2.01in) |
Height | 94mm (3.70in) |
Total Height | 100mm (3.94in) |
Approx Weight | 3.97 Lbs.(1.80kg) |
Current | Maximum Discharge Current for 5 seconds: 180A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 15 mΩ |
Container Material | ABS |
Terminal | F2 |
Compatible UPS Units - Battery Cross Reference
Best: Fortress II - LI 2250, Fortress Rack Mount - LI 1800, Fortress Rack Mount - LI 2250, Fortress LI 1020, Fortress LI 2.25kVA, Fortress LI 950 Compaq: R3000, T1000, T1500, T2000 Data Shield: PC 200, ST 450, ST 550 (1) Deltec: PR 450, PRA 1000, PRA 2000, PRB 500, PRB 650, PRC 1000, PRC 3000-RM, PRK 450, PRK 600, PRM 1000 Oneac: ONe200D | OptiUPS: 1000E Parasystems: A1250, A500, A900 Powerware: PW 3110-650 Sola: 450VA, N-250, S32200, S32200R TrippLite: BC PERS500 Unisys: UP909 UPSonic: LAN 75 |
Gruber 58AGPS-6-12-F2:
|
Battery Type | 6V, 7AH |
Capacity | |
20 hour rate (350mA) | 7Ah |
10 hour rate (651mA) | 6.51Ah |
5 hour rate (1.19A) | 5.95Ah |
Dimensions | |
Length | 151mm (5.95in) |
Width | 34mm (1.34in) |
Height | 94mm (3.70in) |
Total Height | 100mm (3.94in) |
Approx Weight | 2.82 Lbs.(1.28kg) |
Current | Maximum Discharge Current for 5 seconds: 105A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 15 mΩ |
Container Material | ABS |
Terminal | F2 |
All batteries are not created equal. Gruber manufactured the 58AGPS-6-7-F specifically for electronic equipment and offers one of the longest shelf lives assuring your equipment long life and reliability.
Gruber 58AGPS-6-7-F2:
|
Battery Type | 12Volt, 103 Amp Hour |
Capacity | |
405.7 Watts/cell | 15min rate (1.67V/cell) |
103 AH | 20HR (1.80V/cell) |
Dimensions | |
Length | 325mm (12.8 inches) |
Width | 170mm (6.69 inches) |
Height | 213mm (8.39 inches) |
Total Height | 216mm (8.5 inches) |
Approx Weight | 69.2 Lbs.(31.4kg) |
Self Discharge | <3% of capacity declined per month at 25°C |
Current | Max. Discharge Currents(5s): 1650A Initial Charging Current: <33A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 3.6 mΩ |
Container Material | ABS |
Terminal | T8 |
All batteries are not created equal. Gruber manufactured the 58EGPS-12-103-I specifically for electronic equipment and offers one of the longest shelf lives assuring your equipment long life and reliability.
Gruber 58EGPS-12-103-I:Battery Type | 12Volt, 140 Amp Hour |
Capacity | |
490.9 Watts/cell | 15min rate (1.67V/cell) |
140 AH | 20HR (1.80V/cell) |
Dimensions | |
Length | 335mm (13.19in) |
Width | 172mm (6.77in) |
Height | 275mm (10.83in) |
Total Height | 278mm (10.94in) |
Approx Weight | 92.6Lbs.(42kg) |
Self Discharge | <3% of capacity declined per month at 25°C |
Current | Max. Discharge Currents(5s): 1848A Initial Charging Current: <42.6A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 3.2 mΩ |
Container Material | ABS |
Terminal | T8 |
Battery Type | Valve-Regulated, Absorbed Glass Mat |
Capacity | |
92.8 Watts/cell | 15min rate (1.67V/cell) |
27 AH | 20HR (1.80V/cell) |
Dimensions | |
Length | 164mm (6.46 inches) |
Width | 125mm (4.92 inches) |
Height | 172mm (6.77 inches) |
Total Height | 175mm (6.89 inches) |
Approx Weight | 7.90 kg (17.4 lbs) |
Self Discharge | <3% of capacity declined per month at 25°C |
Current | Max. Discharge Currents(5s): 540A Initial Charging Current: <8.1A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 12 mΩ |
Container Material | ABS |
Terminal | T12 |
All batteries are not created equal. Gruber manufactured the 58EGPS-12-26-I specifically for electronic equipment and offers one of the longest shelf lives assuring your equipment long life and reliability.
Gruber 58EGPS-12-26-I:Battery Type | Valve-Regulated, Absorbed Glass Mat |
Capacity | |
150 Watts/cell | 15min rate (1.67V/cell) |
35 AH | 20HR (1.80V/cell) |
Dimensions | |
Length | 195mm (7.68inches) |
Width | 130mm (5.12inches) |
Height | 164mm (6.46inches) |
Total Height | 167mm (6.57inches) |
Approx Weight | 10.2 kg (22.5 lbs) |
Self Discharge | <3% of capacity declined per month at 25°C |
Current | Max. Discharge Currents(5s): 630A Initial Charging Current: <10.5A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 7 mΩ |
Container Material | ABS |
Terminal | T6 |
All batteries are not created equal. Gruber manufactured the 58EGPS-12-35-I specifically for electronic equipment and offers one of the longest shelf lives assuring your equipment long life and reliability.
Gruber 58EGPS-12-35-I:Battery Type | 12Volt, 55 Amp Hour |
Capacity | |
221 Watts/cell | 15min rate (1.67V/cell) |
55 AH | 20HR (1.80V/cell) |
Dimensions | |
Length | 229mm (9.02 inches) |
Width | 138mm (5.43 inches) |
Height | 200mm (7.87 inches) |
Total Height | 203mm (7.99 inches) |
Approx Weight | 38.1Lbs.(17.3kg) |
Self Discharge | <3% of capacity declined per month at 25°C |
Current | Max. Discharge Currents(5s): 825A Initial Charging Current: <16.5A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 5 mΩ |
Container Material | ABS |
Terminal | T6 |
All batteries are not created equal. Gruber manufactured the 58EGPS-12-55-I specifically for electronic equipment and offers one of the longest shelf lives assuring your equipment long life and reliability.
Gruber 58EGPS-12-55-I:Battery Type | 12Volt, 80 Amp Hour |
Capacity | |
303 Watts/cell | 15min rate (1.67V/cell) |
80 AH | 20HR (1.80V/cell) |
Dimensions | |
Length | 259mm (10.2 inches) |
Width | 168mm (6.61 inches) |
Height | 208mm (8.19 inches) |
Total Height | 211mm (8.31 inches) |
Approx Weight | 54Lbs.(24.5kg) |
Self Discharge | <3% of capacity declined per month at 25°C |
Current | Max. Discharge Currents(5s): 1230A Initial Charging Current: <24.6A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 4.5 mΩ |
Container Material | ABS |
Terminal | T6 |
All batteries are not created equal. Gruber manufactured the 58EGPS-12-80-I specifically for electronic equipment and offers one of the longest shelf lives assuring your equipment long life and reliability.
Gruber 58EGPS-12-80-I:Battery Type | 12Volt, 93 Amp Hour |
Capacity | |
359 Watts/cell | 15min rate (1.67V/cell) |
93 AH | 20HR (1.80V/cell) |
Dimensions | |
Length | 305mm (12.0 inches) |
Width | 168mm (6.61 inches) |
Height | 207mm (8.15 inches) |
Total Height | 210mm (8.27 inches) |
Approx Weight | 63.1Lbs.(28.6kg) |
Self Discharge | <3% of capacity declined per month at 25°C |
Current | Max. Discharge Currents(5s): 1425A Initial Charging Current: <28.5A |
Operating Temp Range | |
Charge | 0°c(32°f) to 40°c (104°f) |
Discharge | -15°c(5°f) to 50°c (122°f) |
Storage | -15°c(5°f) to 40°c (104°f) |
Internal Resistance | Approx. 4 mΩ |
Container Material | ABS |
Terminal | T6 |
All batteries are not created equal. Gruber manufactured the 58EGPS-12-93-I specifically for electronic equipment and offers one of the longest shelf lives assuring your equipment long life and reliability.
Gruber 58EGPS-12-93-I:12 Port Cat5e patch panel features:
12 Port Cat6 patch panel features:
UP24-811 24-Port CAT5e patch panel features:
24 Port Cat6 patch panel features:
48 Port Cat5e patch panel features:
48 Port Cat6 patch panel features:
96 Port Cat5e patch panel features:
Educators must be equipped and trained as schools, colleges, and universities across the country integrate new technology. This growth in classroom technology also means You need to remain ahead of the curve for digital capacity, security, and accessibility. So work with us to plan projects for immediate needs and create the capacity for a regimented upgrade path that will save time and money in the future.
With the ever-growing focus on science, technology, engineering, and math to combat the growing skills gap in the labor force, STEM needs to be considered. Modern STEM students need technological tools to adapt and scale to the rigorous growing demands of their education. Let’s work to give them the best possible setup for their needs.
“In 2017, K-12 and higher-education institutions reported 455 cybersecurity incidents, with 73 resulting in data disclosures. In fact, five major universities experienced data breaches larger than the Sony hack.” You likely need to reconsider your cybersecurity in light of recent events. We are here to help with any IT infrastructure required to meet various cybersecurity goals.
As we become more connected, even physical security has become more reliant on IT infrastructure. For example, digital security cameras recordings need to be kept and managed en mass. Likewise, physical barriers require RFID and a master linked control, along with significant list reconciliation between data sets for user IDs and student registries. We can help you plan and price out these solutions.
Server Racks: Enclosures: Wallounts, Soundproof Racks, 2-post and 4-post racks, Inrow Cooling.
Also available: Universal Power Supply, Automatic Transfer Switches, Rack Air Distribution, Rackmount Shelves, Cable Management, Patch Panels, Blanking Panels, Environmental Monitoring, Power Strips & Power Distribution Units, Power Distribution Units Accessories, and Rack Accessories.
Available on Server Racks Online: Enclosures, Wall Mount Cabinets, 2 Post and 4 Post Racks, Two Post Relay Racks.
Available Server Racks Online. Racks built to facilitate server, colocation, and network solutions. Including Universal Power Supplies.
The Eaton PDU line including: Basic Power Distribution Units, Monitored Power Distribution Units, Switched/Outlet-Level Power Distribution Units, Rack Power Distribution Units.
Also Available: Environmental Rack Monitors, Rack Monitoring Products, Cable Management, Airflow Management, Server Rack Hardware & Mounting Brackets, Rack Top & Bottom Panels, Rack Side Panels, Rack Accessories, Environmental Monitoring Probe, Network Interface Card, Universal Power Supply Relay/Serial Interface Card, Mounting Rail Kits, Power & Extension Cords, Server Rack Management, Server Racks Power Distribution Units.
Available on Server Racks Online with cooling via air conditioning, fans, remote management Cabinets, and PDUs.
Available on Server Racks Online under the Liebert banner: Enclosures and Climate Controlled,
Also Available: Rack Power Distribution Units, Universal Power Supply, Maintenance Bypass, Power Output Distribution Boxes, Rack Doors, Monitoring Products, Side Panels, Rackmount Shelves, Blanking Panels, Roof Grommets, Cooling & Airflow Management, Mounting Brackets, and Rack Mounting Hardware.
If you’re shopping for government needs, you know that seeking GSA pricing is the fastest and most expedient way to ensure that you’re getting the best pricing for your project. That’s why 42U has connected with the proper channels to facilitate GSA pricing for your information technology needs.
If you know the materials you need, please fill out our GSA form with the details, and we will reach back to you quickly with more information on how to proceed with your deal.
If you wish to have some assistance working out the details of your project, please fill out our GSA form or call in: 1-866-722-5776, and our educated staff will help you complete your planning phase before moving forward.
]]>
H&H Custom Server Racks |
H&H 26U Server Racks | Height | Depth* | Rails | Width* |
H&H 26U3019 | 26U | 30" | 19" EIA | 23" |
H&H 26U3619 | 26U | 36" | 19" EIA | 23" |
H&H 36U Server Racks | Height | Depth* | Rails | Width* |
H&H 36U3019 | 36U | 30" | 19" EIA | 23" |
H&H 36U3619 | 36U | 36" | 19" EIA | 23" |
H&H 40U Server Racks | Height | Depth* | Rails | Width* |
H&H 40U3019 | 40U | 30" | 19" EIA | 23" |
H&H 40U3219 | 40U | 32" | 19" EIA | 23" |
H&H 40U3619 | 40U | 36" | 19" EIA | 23" |
H&H 40U4019 | 40U | 40" | 19" EIA | 23" |
H&H 44U Server Racks | Height | Depth* | Rails | Width* |
H&H 44U3019 | 44U | 30" | 19" EIA | 23" |
H&H 44U3219 | 44U | 32" | 19" EIA | 23" |
H&H 44U3619 | 44U | 36" | 19" EIA | 23" |
H&H 44U4019 | 44U | 40" | 19" EIA |
H&H 48U Server Racks | Height | Depth* | Rails | Width* |
H&H 48U3019 | 48U | 30" | 19" EIA | 23" |
H&H 48U3219 | 48U | 32" | 19" EIA | 23" |
H&H 48U3619 | 48U | 36" | 19" EIA | 23" |
H&H 2-Post Relay Rack |
H&H Relay Rack | Material | Height | Rails | Width* |
H&H ORBD44U19 | 12ga. steel | 44U | 19" EIA | 20.5" |
H&H Custom Wallmount Cabinets |
H&H Wallmount Cabinets | Height | Depth* | Rails | Width* |
H&H Wall-Mount-28 | 16U | 18" | 19" EIA | 23" |
H&H Wall-Mount-36 | 20U | 18" | 19" EIA | 23" |
H&H Colocation Server Cabinet |
H&H Colocation Cabinets | Height | # of Compartments | Depth* | Rails | Width* |
H&H Colo-Cabinet-230 | 42U | 2- 21U each | 30" | 19" EIA | 23" |
H&H Colo-Cabinet-232 | 42U | 2- 21U each | 32" | 19" EIA | 23" |
H&H Colo-Cabinet-236 | 42U | 2- 21U each | 36" | 19" EIA | 23" |
H&H Colo-Cabinet-240 | 42U | 2- 21U each | 40" | 19" EIA | 23" |
H&H Apple Xserve Compatible Racks |
H&H Apple Xserver Compatible Server Cabinets | Height | Depth* | Rails | Width* |
H&H Apple-Rack-32 | 40U | 32" | 19" EIA | 23" |
H&H Apple-Rack-44U32 | 44U | 32" | 19" EIA | 23" |
H&H Apple-Rack-48U32 | 48U | 32" | 19" EIA | 23" |
H&H Apple-Rack-36 | 40U | 36" | 19" EIA | 23" |
H&H Apple-Rack-44U36 | 44U | 36" | 19" EIA | 23" |
H&H Apple-Rack-48U36 | 48U | 36" | 19" EIA | 23" |
H&H Specialty Server Enclosures |
H&H Dust & Water Resistant Cabinet | Height | Depth* | Rails | Width* |
H&H WR44U3019 | 44U | 30" | 19" EIA | 23" |
H&H Seismic Resistant Server Cabinet | Height | Depth* | Rails | Width* |
H&H SZ44U3019 | 44U | 30" | 19" EIA | 23" |
The HH Server Racks, are configured to be compatible with most computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
* For ease in comparison, depth and width are shown here with rounded external rack dimensions. To see the specific dimensions, please view the individual rack page.
The SHKB1918 rackmount keyboard shelf features ball bearing slides with full length extension. Slide detent helps keep the shelf in closed position when not in use. A quick disconnect allows you to separate the shelf from the cabinet without the need to remove any screws if required.
Specifications:
We do not currently carry HP products on our website but do sell them via quotes. For HP specific product quotes or questions please Contact Us.
HP 10000 G2 Series Server Racks |
The HP 10000 G2 Series Racks provide a universal rack for all HP rackmount products. These racks feature enhancements to structural components, helping to make sure that your mounted devices are easy to access and receive more effective airflow. HP also offers a complete line of server rack accessories.
Mechanical | |
Height | 28.5 in. (72.4 cm.) |
Width | 23.6 in. (60 cm.) |
Depth | 39.69 in. (100 cm.) |
Weight | 135 lbs. (61 kg.) |
Load | |
Static | 600 lbs. (270 kg.) |
Dynamic | 500 lbs. (227 kg.) |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
Environment-friendly Products and Approach | |
End-of-life Management and Recycling | Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. |
The HP S10614 is a 14U server rack which leverages heavily off the design of the HP 10000 series rack family by incorporating features such as: 65% open perforated doors, graphite color, allows zero U mounting of options such as KVM switches or PDUs, U markings on the mounting rails, top and bottom cable routing, CTO ready and accommodating most rack options. In addition the HP server rack is rated to 500lbs dynamic (moving) and 600lbs static (non-moving). Ideal for onsite assembly of rack mounted ProLiant, Alpha 1 and Tandem servers, workstations, networking and StorageWorks products, in addition to most third party products.
Shipped with: front door, rear door, side panel
HP S10614 Features:
HP 10642 Specifications:
Mechanical | |
Height | 78.89 in. (2004 mm.) |
Width | 24 in. (597 mm.) |
Depth | 39.691 in. (1015 mm.) |
Weight | 253 lbs. (114.84 kg.) |
Load | |
Static | 3000 lbs. (1361 kg.) |
Dynamic | 2000 lbs. (908 kg.) |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
The HP 10000 G2 Series 10642 is a 42U, 40" deep server cabinet. The HP server racks are designed for easy access to devices mounted in the racks, as well as supporting heavy dynamic loads and allowing for increased airflow to pass from the front to the back of the rack. This server rack features the EIA standard 19" wide rackmount.
Shipped with: front door, rear door
NOTE: The side panels for this HP rack are sold separately visit the HP AF054A page for more details.
]]>HP 10636 Specifications:
Mechanical | |
Height | 68.6 in. (1735 mm.) |
Width | 24 in. (597 mm.) |
Depth | 39.691 in. (1015 mm.) |
Weight | 220 lbs. (100 kg.) |
Load | |
Static | 2000 lbs. (908 kg.) |
Dynamic | 1520 lbs. (690 kg.) |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
The HP 10000 G2 Series 10636 is a 36U server cabinet. The HP server racks are designed for easy access to devices mounted in the racks, as well as supporting heavy dynamic loads and allowing for increased airflow to pass from the front to the back of the rack. This server rack features the EIA standard 19" wide rackmount.
Shipped with: front door, rear door
]]>HP 10622 Specifications:
Mechanical | |
Height | 43 in. (1092.2 mm.) |
Width | 24 in. (609.6 mm.) |
Depth | 39.691 in. (1008.2 mm.) |
Weight | 176 lbs. (79.89 kg.) |
Load | |
Static | 2000 lbs. (908 kg.) |
Dynamic | 1045 lbs. (474 kg.) |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
fully enclosed
]]>The HP server racks are designed for easy access to devices mounted in the racks, as well as supporting heavy dynamic loads and allowing for increased airflow to pass from the front to the back of the rack. This server rack features the EIA standard 19" wide rackmount.
Shipped with: front door, rear door, side panel, stabiliser kit
]]>HP 10647 Specifications:
Mechanical | |
Height | 89.96 in. (2285 mm.) |
Width | 24 in. (609.6 mm.) |
Depth | 39.691 in. (1008.2 mm.) |
Weight | 245 lbs. (111 kg.) |
Load | |
Static | 3000 lbs. (1361 kg.) |
Dynamic | Do not ship with equipment installed |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
fully enclosed
]]>Shipped with: front door, rear door
This item is out of stock and no longer available.
]]>HP 10642 (1200mm deep) Specifications:
Mechanical | |
Height | 79 in. (2007 mm.) |
Width | 24 in. (600 mm.) |
Depth | 48.875 in. (1238 mm.) |
Weight | 250 lbs. (113 kg.) |
Load | |
Static | 3000 lbs. (1361 kg.) |
Dynamic | 2000 lbs. (908 kg.) |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
The HP 10000 G2 Series 10642 is a 42U, 49" deep server cabinet. The HP server racks are designed for easy access to devices mounted in the racks, as well as supporting heavy dynamic loads and allowing for increased airflow to pass from the front to the back of the rack. This server rack features the EIA standard 19" wide rackmount.
Shipped with: front door, rear door, rear extension (200 mm)
NOTE: The side panels for this HP rack are sold separately visit the HP AF054A page for more details.
]]>HP 10842 Specifications:
Mechanical | |
Height | 78.7 in. (1999 mm.) |
Width | 31.5 in. (800.1 mm.) |
Depth | 39.691 in. (1008.2 mm.) |
Weight | 295 lbs. (133.8 kg.) |
Load | |
Static | 2000 lbs. (908 kg.) |
Dynamic | 2000 lbs. (908 kg.) |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
The HP 10000 G2 Series 10842 is a 42U, 40" deep server cabinet. The 10842 G2 has a wider width of 31.5", however; it still features the EIA standard 19" wide rackmount. The HP server racks are designed for easy access to devices mounted in the racks, as well as supporting heavy dynamic loads and allowing for increased airflow to pass from the front to the back of the rack.
Shipped with: front door, rear door
]]>HP 10647 (1200mm deep) Specifications:
Mechanical | |
Height | 89.96 in. (2285 mm.) |
Width | 24 in. (610 mm.) |
Depth | 48.875 in. (1240 mm.) |
Weight | 260 lbs. (118 kg.) |
Load | |
Static | 3000 lbs. (1361 kg.) |
Dynamic | 2000 lbs. (908 kg.) |
Color | |
Doors | Graphite Metallic |
Frame | Carbon |
fully enclosed
]]>The HP 10000 G2 Series 10647 is a 47U, 49" deep server cabinet. The HP server racks are designed for easy access to devices mounted in the racks, as well as supporting heavy dynamic loads and allowing for increased airflow to pass from the front to the back of the rack. This server rack features the EIA standard 19" wide rackmount.
Shipped with: front door, rear door, rear extension (200 mm)
]]>The HP AF054A is a side panel kit (set of 2 panels) for the 42U HP 10000 G2 series server racks. This side panel kit is compatible with HP 10642 G2 server racks.
HP AF054A Features:
BW895A HP 636 1075mm Pallet Intelligent Series Rack
]]>The HH Server Cabinets, are configured to be compatible with most computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
Server Cabinet Features All Server Cabinets feature a steel frame for added stability. The Server Cabinet Doors have continuous hinges for flawless operation. The top panel is vented so a fan can be added for more ventilation. | Server Cabinet Specifications Our Server Cabinets are made with .060 (16 Gauge) CRS steel and you have your choice of colors (IBM blue, Black, Pearl White, Light and Dark Gray) | |
Server Cabinet Accessories Our Server Cabinets have multiple options for Front Doors including Solid Steel, Louvered, Plexiglas, Perforated Steel, and Perforated Steel with Plexiglas insert. All doors are lockable and secure. We offer solid and removable side panels for your convenience. All Server Cabinet Doors are full length for added security. We also offer multiple power strips that fit behind the rails so they don't take up any additional rack space. An exhaust fan can also be added to any Server Cabinet for ventilation. | Server Cabinet Dimensions All of our Server Cabinets are 19" EIA Rack Mount Standard Width. You have your choice of heights from 76" to 90" and depths from 30" to 40". |
The HH Computer Cabinets, are configured to be compatible with most computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
Computer Cabinet Features All Computer Cabinets feature a steel frame for added stability. The Computer Cabinet Doors have continuous hinges for flawless operation. The top panel is vented so a fan can be added for more ventilation. | Computer Cabinet Specifications Our Computer Cabinets are made with .060 (16 Gauge) CRS steel and you have your choice of colors (IBM blue, Black, Pearl White, Light and Dark Gray) | |
Computer Cabinet Accessories Our Computer Cabinets have multiple options for Front Doors including Solid Steel, Louvered, Plexiglas, Perforated Steel, and Perforated Steel with Plexiglas insert. All doors are lockable and secure. We offer solid and removable side panels for your convenience. All Computer Cabinet Doors are full length for added security. We also offer multiple power strips that fit behind the rails so they don't take up any additional rack space. An exhaust fan can also be added to any Computer Cabinet for ventilation. | Computer Cabinet Dimensions All of our Computer Cabinets are 19" EIA Rack Mount Standard Width. You have your choice of heights from 83" to 90" and depths from 30" to 40". |
The HH Server Racks, are configured to be compatible with most computer server manufacturer's equipment including: Compaq, Dell, HP, IBM, and Sun.
Server Rack Features All Server Racks feature a steel frame for added stability. The Server Rack Doors have continuous hinges for flawless operation. The top panel is vented so a fan can be added for more ventilation. | Server Rack Specifications Our Server Racks are made with .060 (16 Gauge) CRS steel and you have your choice of colors (IBM blue, Black, Pearl White, Light and Dark Gray) | |
Server Rack Accessories Our Server Racks have multiple options for Front Doors including Solid Steel, Louvered, Plexiglas, Perforated Steel, and Perforated Steel with Plexiglas insert. All doors are lockable and secure. We offer solid and removable side panels for your convenience. All Server Rack Doors are full length for added security. We also offer multiple power strips that fit behind the rails so they don't take up any additional rack space. An exhaust fan can also be added to any Server Rack for ventilation. | Server Rack Dimensions All of our Server Racks are 19" EIA Rack Mount Standard Width. You have your choice of heights from 90" to 90" and depths from 30" to 40". |
HotLok Blanking Panels reduce hotspots and bypass airflow by preventing equipment exhaust air or hot aisle air from circulating to the conditioned air-intake stream at the front of the cabinet.
New, patented Hybrid Brush Technology (HBT) offers exceptional sealing and airflow management, unsurpassed by other leading brush products on the market today. Hybrid Brush Sealing Technology automatically seals around cables with no additional maintenance or monitoring required.
Removable clip and threaded bolt system ensures panel is firmly fastened to the rack. Designed to complement the HotLok Solid Blanking Panel ensuring a tight seal when placed betwen a pullout switch, server or tray.
|
This new aluminum and Hybrid Brush Technology panel cost effectively controls airflow and particulates for optimized cooling effectiveness. Lab tested HotLok Pass Through Blanking Panels also perform better than any competitive product. Available in both 1U and 2U configurations
HotLok Blanking Panels reduce hotspots and bypass airflow by preventing equipment exhaust air or hot aisle air from circulating to the conditioned air-intake stream at the front of the cabinet.
New, patented Hybrid Brush Technology (HBT) offers exceptional sealing and airflow management, unsurpassed by other leading brush products on the market today. Hybrid Brush Sealing Technology automatically seals around cables with no additional maintenance or monitoring required.
Removable clip and threaded bolt system ensures panel is firmly fastened to the rack. Designed to complement the HotLok Solid Blanking Panel ensuring a tight seal when placed betwen a pullout switch, server or tray.
Dimensions & Usable Area | |
Length | 19" (482.5mm) |
Height | 3.5" (89mm) |
Usable Area | 42.75 sq. inches (1085 sq. mm) |
This new aluminum and Hybrid Brush Technology panel cost effectively controls airflow and particulates for optimized cooling effectiveness. Lab tested HotLok Pass Through Blanking Panels also perform better than any competitive product. Available in both 1U and 2U configurations
| ||||||||||
|
Note: Recommended installation requires Sealing Membrane Kit (sold separately).
]]>
| ||||||||||
|
The Upsite Hotlok 10134 is a server rack airflow management ("RAM") system designed to greatly reduce bypass and re-circulated airflow within your data center cabinet. Mounted vertically between the rails and the internal server cabinet wall, this vertical blanking panel also isolates exhausted airflow from the rear of the cabinet. This effective tool compliments sealing server cabinet space and increases usable cooling unit capacity, thereby maximizing cooling infrastructure efficiency. This versatile product is composed of Rigid PVC, which can be easily cut and shortened, allowing on-site customization.
Note: Recommended installation requires Sealing Membrane Kit (sold separately).
]]>Intelligence
HP Intelligent Series Rack enclosures with optional HP Location Discovery Services allow you to fine-tune workload placement with servers that self-identify and inventory themselves, allowing you to efficiently place workloads while removing manual, error prone asset management tasks.
Cooling
HP Thermal Discovery Services technology correlates server temperature and workload to reduce server fan power needed to cool servers efficiently, and an innovative 81% open perforation area on the door helps better cool servers.
Power
HP Power Discovery Services technology removes power configuration errors and precisely tracks power usage by rack and by server, therefore getting rid of manual record keeping.
Structural Integrity
Up to 3000 pounds of dynamic loading enables HP Intelligent Series racks to ship and be moved fully configured with all types of equipment.
Convenience
Unmatched cable management in the back of the rack provides tool-less operations and extra space for hot air to pass from the rack.
HP 842 Specifications:
Mechanical | |
Height | 79 in. (1999 mm.) |
Width | 31.3 in. (798 mm.) |
Depth | 44.3 in. (1125 mm.) |
Weight | 304 lbs. (138 kg.) |
Load | |
Static | 3000 lbs. (1360 kg.) |
Dynamic | 2500 lbs. (1134 kg.) |
Color | |
Doors | Black with silver extrusion |
Frame | Black |
Do you need better intelligence on your datacenter's power and cooling, and server location and identity? The HP Intelligent Series 842 Rack, with optional Location Discovery Services sends the rack identification number and precise U location to the servers. This provides important location information to iLO, HP OneView and Insight Control Software along with server power and temperature data, allowing you to place workloads more efficiently.
]]>F-1-6 Fan Tray | |
IP Remote Access | No |
Daisy Chain Level | None |
No. of Fans | 6 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 648 CFM |
Individual Fan On/Off | No |
Noise Level | 41 dB |
MTBF | 50,000 hrs |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 40W |
Casing Color | Black |
Mounting | 1U Rackmount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 18.9 x 18 x 1.71 inch (480 x 458.3 x 43.5 mm) 15.0 lbs. (6.8 kg) |
Packing | 21.7 x 21.7 x 4.7 inch (550 x 550 x 120 mm) 17.6 lbs. (8.0 kg) |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
]]>
F-1.9 Fan Tray | |
IP Remote Access | No |
Daisy Chain Level | None |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
Individual Fan On/Off | No |
Noise Level | 41 dB |
MTBF | 50,000 hrs |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 1U Rackmount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 18.9 x 24.5 x 1.71 inch (480 x 623.3 x 43.5 mm) 19.8 lbs. (9.0 kg) |
Packing | 21.7 x 28.7 x 4.7 inch (550 x 730 x 120 mm) 24.2 lbs. (11.0 kg) |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
]]>
** Take a look at the table below to determine appropriate Model
Model | Installation | Airflow | Purpose |
F-33-9A (This Unit) | Rear door outside → Front door inside → | Extract airflow → Intake airflow → | Exhaust air out from rack Cool air in from aisle |
F-33-9B | Front door outside → Rear door inside → | Intake airflow → Extract airflow → | Cool air in from aisle Exhaust air out from rack |
F-33.9 Specifications
F-33.9 Fan Panel | |
IP Remote Access | No |
Daisy Chain Level | None |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
Individual Fan On/Off | No |
MTBF | 50,000 hrs |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 33U door mount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 7.7 x 1.7 x 57.7 inch (195 x 42.9 x 1466 mm) 10.1 lbs. (4.6 kg) |
Packing | 11.8 x 5.5 x 59 inch (300 x 140 x 1500 mm) 15.2 lbs. (6.9 kg) |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
** Take a look at the table below to determine appropriate Model
Model | Installation | Airflow | Purpose |
F-33-9B (This Unit) | Front door outside → Rear door inside → | Intake airflow → Extract airflow → | Cool air in from aisle Exhaust air out from rack |
F-33-9A | Rear door outside → Front door inside → | Extract airflow → Intake airflow → | Exhaust air out from rack Cool air in from aisle |
F-33.9 Specifications
F-33.9 Fan Panel | |
IP Remote Access | No |
Daisy Chain Level | None |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
Individual Fan On/Off | No |
MTBF | 50,000 hrs |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 33U door mount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 7.7 x 1.7 x 57.7 inch (195 x 42.9 x 1466 mm) 10.1 lbs. (4.6 kg) |
Packing | 11.8 x 5.5 x 59 inch (300 x 140 x 1500 mm) 15.2 lbs. (6.9 kg) |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
MRF-1-6 Master IP Fan Tray | |
IP Remote Access | Yes |
Daisy Chain Level | 1st Level, cascade fan panel/tray 2nd - 16th |
No. of Fans | 6 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 648 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 40W |
Casing Color | Black |
Mounting | 1U Rackmount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 18.9 x 18 x 1.71 inch (480 x 458.3 x 43.5 mm) 15.0 lbs. (6.8 kg) |
Packing | 21.7 x 21.7 x 4.7 inch (550 x 550 x 120 mm) 17.6 lbs. (8.0 kg) |
The Master IP Fan Unit is bundled with internal IP dongle for connection to WAN. Hence, it is applied as the 1st chain, whereas a Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>MRF-1-9 Master IP Fan Tray | |
IP Remote Access | Yes |
Daisy Chain Level | 1st Level, cascade fan panel/tray 2nd - 16th |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 1U Rackmount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 18.9 x 24.5 x 1.71 inch (480 x 623.3 x 43.5 mm) 19.8 lbs. (9.0 kg) |
Packing | 21.7 x 28.7 x 4.7 inch (550 x 730 x 120 mm) 24.2 lbs. (11.0 kg) |
The Master IP Fan Unit is bundled with internal IP dongle for connection to WAN. Hence, it is applied as the 1st chain, whereas a Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>33U Door Mount Slave Fan Panel
33U Door Mount Master Fan Panel
** Take a look at the table below to determine appropriate Model
Model | Installation | Airflow | Purpose |
MRF-33-9A (This Unit) | Rear door outside → Front door inside → | Extract airflow → Intake airflow → | Exhaust air out from rack Cool air in from aisle |
MRF-33-9B | Front door outside → Rear door inside → | Intake airflow → Extract airflow → | Cool air in from aisle Exhaust air out from rack |
Product Features & Benefits
MRF-33.9 Specifications
MRF-33.9 Master IP Fan Panel | |
IP Remote Access | Yes |
Daisy Chain Level | 1st Level, cascade fan panel/tray 2nd - 16th |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 33U door mount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 7.7 x 1.7 x 57.7 inch (195 x 42.9 x 1466 mm) 11 lbs. (5.0 kg) |
Packing | 11.8 x 5.5 x 59 inch (300 x 140 x 1500 mm) 16.3 lbs. (7.4 kg) |
The Master IP Fan Unit is bundled with internal IP dongle for connection to WAN. Hence, it is applied as the 1st chain, whereas a Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>33U Door Mount Master Fan Panel
** Take a look at the table below to determine appropriate Model
Model | Installation | Airflow | Purpose |
MRF-33-9B (This Unit) | Front door outside → Rear door inside → | Intake airflow → Extract airflow → | Cool air in from aisle Exhaust air out from rack |
MRF-33-9A | Rear door outside → Front door inside → | Extract airflow → Intake airflow → | Exhaust air out from rack Cool air in from aisle |
Product Features & Benefits
MRF-33.9 Specifications
MRF-33.9 Master IP Fan Panel | |
IP Remote Access | Yes |
Daisy Chain Level | 1st Level, cascade fan panel/tray 2nd - 16th |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 33U door mount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 7.7 x 1.7 x 57.7 inch (195 x 42.9 x 1466 mm) 11 lbs. (5.0 kg) |
Packing | 11.8 x 5.5 x 59 inch (300 x 140 x 1500 mm) 16.3 lbs. (7.4 kg) |
The Master IP Fan Unit is bundled with internal IP dongle for connection to WAN. Hence, it is applied as the 1st chain, whereas a Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>RF-1-3 Remote IP Fan Tray | |
IP Remote Access | No |
Daisy Chain Level | From 2nd to 16th level |
No. of Fans | 3 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 324 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 20W |
Casing Color | Black |
Mounting | 1U Rackmount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 18.9 x 11.7 x 1.71 inch (480 x 298.3 x 43.5 mm) 8.8 lbs. (4.0 kg) |
Packing | 15 x 21.1 x 4.7 inch (380 x 535 x 120 mm) 11.0 lbs. (5.0 kg) |
Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>RF-1-6 Remote IP Fan Tray | |
IP Remote Access | No |
Daisy Chain Level | From 2nd to 16th level |
No. of Fans | 6 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 648 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 40W |
Casing Color | Black |
Mounting | 1U Rackmount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 18.9 x 18 x 1.71 inch (480 x 458.3 x 43.5 mm) 15.0 lbs. (6.8 kg) |
Packing | 15 x 21.1 x 4.7 inch (380 x 535 x 120 mm) 8.0 lbs. (17.6 kg) |
Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>RF-1-9 Remote IP Fan Tray | |
IP Remote Access | No |
Daisy Chain Level | From 2nd to 16th level |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 1U Rackmount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 18.9 x 24.5 x 1.71 inch (480 x 623.3 x 43.5 mm) 19.8 lbs. (9.0 kg) |
Packing | 21.7 x 28.7 x 4.7 inch (550 x 730 x 120 mm) 24.2 lbs. (11.0 kg) |
Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>33U Door Mount Slave Fan Panel
** Take a look at the table below to determine appropriate Model
Model | Installation | Airflow | Purpose |
RF-33-9A (This Unit) | Rear door outside → Front door inside → | Extract airflow → Intake airflow → | Exhaust air out from rack Cool air in from aisle |
RF-33-9B | Front door outside → Rear door inside → | Intake airflow → Extract airflow → | Cool air in from aisle Exhaust air out from rack |
Product Features & Benefits
RF-33.9 Specifications
RF-33.9 Remote Fan Panel | |
IP Remote Access | NO |
Daisy Chain Level | From 2nd to 16th level |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 33U door mount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 7.7 x 1.7 x 57.7 inch (195 x 42.9 x 1466 mm) 11 lbs. (5.0 kg) |
Packing | 11.8 x 5.5 x 59 inch (300 x 140 x 1500 mm) 16.3 lbs. (7.4 kg) |
Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>33U Door Mount Slave Fan Panel
33U Door Mount Slave Fan Panel
** Take a look at the table below to determine appropriate Model
Model | Installation | Airflow | Purpose |
RF-33-9B (This Unit) | Front door outside → Rear door inside → | Intake airflow → Extract airflow → | Cool air in from aisle Exhaust air out from rack |
RF-33-9A | Rear door outside → Front door inside → | Extract airflow → Intake airflow → | Exhaust air out from rack Cool air in from aisle |
Product Features & Benefits
RF-33.9 Specifications
RF-33.9 Remote Fan Panel | |
IP Remote Access | NO |
Daisy Chain Level | From 2nd to 16th level |
No. of Fans | 9 |
Individual Fan CFM | 108 CFM |
Unit CFM (approx.) | 972 CFM |
CFM Levels | Noraml/High/Max |
Individual Fan On/Off | Yes |
MTBF | 50,000 hrs |
Temperature Sensor | |
Temp Port | 1 x temp sensor port (sensor bundled) |
Measurement Range | 0 to 99.9°C |
Measurement Accuracy | +/- 1.5% |
Temperature Alarm | Yes |
Enviromental | |
Operating | 0 to 50°C |
Storage | -5 to 60°C |
Relative Humidity | 5~90%, non-condensing |
Shock | 50G peak acceleration (11ms, half-sine wave) |
Vibration | 58~100Hz / 0.98G (11ms /cycle) |
Power | |
Input | Auto-sensing, 100V or 240V AC at 50 or 60Hz via IEC type cord |
Consumption | 60W |
Casing Color | Black |
Mounting | 33U door mount |
Safety Regulatory | FCC & CE certified |
Enviroment | RoHS2 & REACH compliant by SGS |
Dimensions and Weight | |
Product | 7.7 x 1.7 x 57.7 inch (195 x 42.9 x 1466 mm) 11 lbs. (5.0 kg) |
Packing | 11.8 x 5.5 x 59 inch (300 x 140 x 1500 mm) 16.3 lbs. (7.4 kg) |
Remote Fan Unit without built-in IP dongle will be located to the 2nd to 16th fan unit levels
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP24C13-60A-WS Specifications:
Mechanical | |
Length | 55.12" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 4 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP24C13-60A-WS is: VP24C13-60A-WS/CR_EN/2B-1
]]>The InfraPower VP24C13-60A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>]]>
H12C13-20A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-20A-MD is: H12C13-20A-MD/CR_L620/3B-1
Similar ServerTech PDU model: C-12H0A113
]]>The InfraPower H12C13-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H12C13-20A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.7" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-20A-W is: H12C13-20A-W/CR_L620/3B-1
Similar ServerTech PDU model: CS-12HD2G454A3
]]>The InfraPower H12C13-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H12C13-20A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.8" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-20A-WS is: H12C13-20A-WS/CR_L620/3B-1
]]>
The InfraPower H12C13-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H12C13-20A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Depth | 13.78" |
Height | 1.75" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-20A-WSi is: H12C13-20A-WSi/CR_L620/3B-1
Similar ServerTech PDU model: C2WG12BM-0AJA2D0
]]>The InfraPower H12C13-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>H12C13-30A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-30A-MD is: H12C13-30A-MD/CR_L630/3B-1
]]>The InfraPower H12C13-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H12C13-30A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.7" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-30A-W is: H12C13-30A-W/CR_L630/3B-1
Similar ServerTech PDU model: CS-12HD2C454A3
]]>The InfraPower H12C13-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H12C13-30A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.8" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-30A-WS is: H12C13-30A-WS/CR_L630/3B-1
]]>
The InfraPower H12C13-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H12C13-30A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Depth | 13.78" |
Height | 1.75" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H12C13-30A-WSi is: H12C13-30A-WSi/CR_L630/3B-1
Similar ServerTech PDU model: C2WG12BM-2CJA2D0
]]>The InfraPower H12C13-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>For more information see:
H12US-20A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H12US-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>H12US-30A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 12 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
Similar ServerTech PDU model: C-12H1B211E7
]]>The InfraPower H12US-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>H16C13/4C19-20A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-20A-MD is: H16C13/4C19-20A-MD/CR_L620/3B-1
]]>The InfraPower H16C13/4C19-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H16C13/4C19-20A-W/CR_L620/3B-1 Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 13.7" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-20A-W is: H16C13/4C19-20A-W/CR_L620/3B-1
]]>The InfraPower H16C13/4C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H16C13/4C19-20A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 13.8" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-20A-WS is: H16C13/4C19-20A-WS/CR_L620/3B-1
]]>
The InfraPower H16C13/4C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H16C13/4C19-20A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Depth | 13.78" |
Height | 3.5" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-20A-WSi is: H16C13/4C19-20A-WSi/CR_L620/3B-1
]]>The InfraPower H16C13/4C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>H16C13/4C19-30A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-30A-MD is: H16C13/4C19-30A-MD/CR_L620/3B-1
]]>The InfraPower H16C13/4C19-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H16C13/4C19-30A-W/CR_L630/3B-1 Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 13.7" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-30A-W is: H16C13/4C19-30A-W/CR_L630/3B-1
]]>The InfraPower H16C13/4C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H16C13/4C19-30A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 13.8" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-30A-WS is: H16C13/4C19-30A-WS/CR_L630/3B-1
]]>
The InfraPower H16C13/4C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H16C13/4C19-30A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Depth | 13.78" |
Height | 3.5" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H16C13/4C19-30A-WSi is: H16C13/4C19-30A-WSi/CR_L630/3B-1
]]>The InfraPower H16C13/4C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>For more information see:
H20US-20A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 13.78" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H20US-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H20US-20A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower H20US-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H20US-20A-WSi Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower H20US-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>For more information see:
H20US-30A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 13.78" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H20US-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H20US-30A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower H20US-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H20US-30A-WSi Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower H20US-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>H24US-20A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H24US-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>H24US-30A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 3.5" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H24US-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>H8C13-20A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-20A-MD is: H8C13-20A-MD/CR_L620/3B-1
]]>The InfraPower H8C13-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H8C13-20A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.7" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-20A-W is: H8C13-20A-W/CR_L620/3B-1
]]>The InfraPower H8C13-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8C13-20A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.8" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-20A-WS is: H8C13-20A-WS/CR_L620/3B-1
Similar ServerTech PDU model: C1W08HC-0A002BAC
]]>The InfraPower H8C13-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8C13-20A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Depth | 13.78" |
Height | 1.75" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-20A-WSi is: H8C13-20A-WSi/CR_L620/3B-1
]]>The InfraPower H8C13-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>H8C13-30A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output)) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-30A-MD is: H8C13-30A-MD/CR_L630/3B-1
]]>The InfraPower H8C13-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H8C13-30A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.7" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-30A-W is: H8C13-30A-W/CR_L630/3B-1
]]>The InfraPower H8C13-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8C13-30A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 13.8" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-30A-WS is: H8C13-30A-WS/CR_L630/3B-1
Similar ServerTech PDU model: C1W08HC-2CBA2BAC
]]>The InfraPower H8C13-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8C13-30A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Depth | 13.78" |
Height | 1.75" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 8 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the H8C13-30A-WSi is: H8C13-30A-WSi/CR_L630/3B-1
Similar ServerTech PDU model: C2WG08HC-2CBA2DAC
]]>The InfraPower H8C13-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>H8US-20A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H8US-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H8US-20A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H8US-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8US-20A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
Similar ServerTech PDU model: C1W08HC-1ACA2BA5
]]>The InfraPower H8US-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8US-20A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 1.75" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower H8US-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>H8US-30A-MD Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 4.73" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H8US-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
H8US-30A-W Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower H8US-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8US-30A-WS Specifications:
Mechanical | |
Length | 17.23" |
Height | 1.75" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
Similar ServerTech PDU model: C1W08HC-1DCA2BA5
]]>The InfraPower H8US-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
H8US-30A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 1.75" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 8 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower H8US-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>For more information see:
HP12C13-6C19-20A-W Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" (2U) |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max.4 x C13 + 2 x C19 |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP12C13-6C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP12C13/6C19-20A-WS Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 4 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP12C13/6C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP12C13/6C19-20A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 4 x C13 + 2 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP12C13/6C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>For more information see:
HP12C13-6C19-30A-W Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" (2U) |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max.4 x C13 + 2 x C19 |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP12C13-6C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP12C13/6C19-30A-WS Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 4 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP12C13/6C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP12C13/6C19-30A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 4 x C13 + 2 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP12C13/6C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>HP18C13-20A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 6 x C13 |
Outlets | 18 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
HP18C13-20A-W Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" (2U) |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max.6 x C13 |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring. Image depicts 24 port version.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP18C13-20A-WS Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 11.6A max. 6 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP18C13-20A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 11.6A max. 6 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>HP18C13-30A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max. 6 x C13 |
Outlets | 18 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
HP18C13-30A-W Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" (2U) |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max.6 x C13 |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring. Image depicts 24-port version.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP18C13-30A-WS Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 17.3A max. 6 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP18C13-30A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 17.3A max. 6 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>HP18C13/6C19-20A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 6 x C13 + 2 x C19 |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13/6C19-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>HP18C13/6C19-30A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max. 6 x C13 + 2 x C19 |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP18C13/6C19-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>HP21C13/3C19-20A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 7 x C13 + 1 x C19 |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP21C13/3C19-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>HP21C13/3C19-30A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max. 7 x C13 + 1 x C19 |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP21C13/3C19-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>HP24C13-20A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 8 x C13 |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
HP24C13-20A-WSpecifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" (2U) |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max.8 x C13 |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP24C13-20A-WS Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 11.6A max. 8 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP24C13-20A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 11.6A max. 8 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>HP24C13-30A Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 10.63" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max. 8 x C13 |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
HP24C13-30A-WSpecifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" (2U) |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max.8 x C13 |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP24C13-30A-WS Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 17.3A max. 8 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 16 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
HP24C13-30A-WSi Specifications:
Mechanical | |
Width | 17.23" |
Height | 3.5" |
Depth | 14.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Phase Details (per phase) | Output 17.3A max. 8 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower HP24C13-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 16 PDUs, sold separately
]]>The patented IPD-02-S IP Dongle provides IP remote access to any intelligent InfraPower PDU equipped with the W meter via a network IP address. A single IP dongle allows remote access for up to 16 daisy chained PDUs - which not only saves the cost of additional IP dongles, but also the need for individual IP addresses for each PDU.
The hot-pluggable design facilitates dongle installation. Simply integrate the IP Dongle to the 1st PDU, then the entire daisy chain group can be remote managed over IP. Administrators can remotely access all the PDUs in the daisy chain group from one single IP address via the IP Dongle.
]]>The hot-pluggable design facilitates dongle installation. Simply integrate the IP Dongle to the 1st PDU, then the entire daisy chain group can be remote managed over IP. Administrators can remotely access all the PDUs in the daisy chain group from one single IP address via the IP Dongle.
The new stylish IPD-03-S Dual LAN dongle provides standard 10/100 & Gigabit Ethernet ports. In addition to dual LAN fail-over, the PDUs in the daisy chain can be set up for access via two independent networks or VLANs. With the optional WIFI kit (IPD-WIFI) attached to the USB port, the IPD-03-S will support 802.11 g/n/ac WIFI standards.
]]>The patented IPD-H02-S IP Dongle provides IP remote access to any intelligent InfraPower PDU equipped with the W meter via a network IP address. A single IP dongle allows remote access for up to 16 daisy chained PDUs - which not only saves the cost of additional IP dongles, but also the need for individual IP addresses for each PDU.
The hot-pluggable design facilitates dongle installation. Simply integrate the IP Dongle to the 1st PDU, then the entire daisy chain group can be remote managed over IP. Administrator can remotely access all PDUs in the daisy chain group from one single IP address via the IP Dongle.
]]>The patented IPD-H03-S IP Dongle provides IP remote access to any horizontal intelligent InfraPower PDU equipped with the W meter via a network IP address. A single IP dongle allows remote access for up to 32 daisy chained PDUs - which not only saves the cost of additional IP dongles, but also the need for individual IP addresses for each PDU.
The hot-pluggable design facilitates dongle installation. Simply integrate the IP Dongle to the 1st PDU, then the entire daisy chain group can be remote managed over IP. Administrators can remotely access all the PDUs in the daisy chain group from one single IP address via the IP Dongle.
The new stylish IPD-03-S Dual LAN dongle provides standard 10/100 & Gigabit Ethernet ports. In addition to dual LAN fail-over, the PDUs in the daisy chain can be set up for access via two independent networks or VLANs. With the optional WIFI kit (IPD-WIFI) attached to the USB port, the IPD-03-S will support 802.11 g/n/ac WIFI standards.
]]>]]>
Austin Hughes offers cost efficient PDU models with the most popular configurations in the market. In addition, custom PDU configurations are also available on request for flexibility & specific user requirements. With build to order system, Austin Hughes produces & delivers exactly what the customer needs.
V16C13-20A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-20A-MD is: V16C13-20A-MD/CR_L620/3B-1
]]>The InfraPower V16C13-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V16C13-20A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-20A-W is: V16C13-20A-W/CR_L620/3B-1
]]>The InfraPower V16C13-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13-20A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-20A-WS is: V16C13-20A-WS/CR_L620/3B-1
Similar ServerTech PDU model: C1W16VS-0AFA17AC
]]>The InfraPower V16C13-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13-20A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-20A-WSi is: V16C13-20A-WSi/CR_L620/3B-1
]]>The InfraPower V16C13-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V16C13-30A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-30A-MD is: V16C13-30A-MD/CR_L620/3B-1
]]>The InfraPower V16C13-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V16C13-30A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-30A-W is: V16C13-30A-W/CR_L630/3B-1
]]>The InfraPower V16C13-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13-30A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-30A-WS is: V16C13-30A-WS/CR_L630/3B-1
Similar ServerTech PDU model: C1W16VS-2CFA17AC
]]>The InfraPower V16C13-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13-30A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-30A-WSi is: V16C13-30A-WSi/CR_L630/3B-1
]]>The InfraPower V16C13-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V16C13/4C19-20A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-20A-MD is: V16C13/4C19-20A-MD/CR_L620/3B-1
]]>The InfraPower V16C13/4C19-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V16C13/4C19-20A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.5" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-20A-W is: V16C13/4C19-20A-W/CR_L620/3B-1
]]>The InfraPower V16C13/4C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13/4C19-20A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-20A-WS is: V16C13/4C19-20A-WS/CR_L620/3B-1
]]>
The InfraPower V16C13/4C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13/4C19-20A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-20A-WSi is: V16C13/4C19-20A-WSi/CR_L620/3B-1
]]>The InfraPower V16C13/4C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V16C13/4C19-30A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-30A-MD is: V16C13/4C19-30A-MD/CR_L620/3B-1
]]>The InfraPower V16C13/4C19-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V16C13/4C19-30A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.5" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-30A-W is: V16C13/4C19-30A-W/CR_L630/3B-1
]]>The InfraPower V16C13/4C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13/4C19-30A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-30A-WS is: V16C13/4C19-30A-WS/CR_L630/3B-1
]]>
The InfraPower V16C13/4C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16C13/4C19-30A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13/4C19-30A-WSi is: V16C13/4C19-30A-WSi/CR_L630/3B-1
]]>The InfraPower V16C13/4C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V16US-20A-MD Specifications:
Mechanical | |
Width | 2.13" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V16US-20A-MD 0U Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V16US-20A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 53.15" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V16US-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16US-20A-WS Specifications:
Mechanical | |
Width | 2.13" |
Height | 51.18" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
Similar ServerTech PDU model: C1W16VS-1AFA17A5
]]>The InfraPower v16US-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16US-20A-WSi Specifications:
Mechanical | |
Width | 2.13" |
Depth | 3.15" |
Height | 53.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 16 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
All Vertical InfraPower PDUs come with both button (VMS) and bracket (VMB) mounting hardware.
]]>The InfraPower V16US-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V16US-30A-MD Specifications:
Mechanical | |
Width | 2.13" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V16US-30A-MD Metered 0U Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V16US-30A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 53.15" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V16US-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16US-30A-WS Specifications:
Mechanical | |
Width | 2.13" |
Height | 51.18" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
Similar ServerTech PDU model: C1W16VS-1DFA17A5
]]>The InfraPower v16US-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V16US-30A-WSi Specifications:
Mechanical | |
Width | 2.13" |
Depth | 3.15" |
Height | 53.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 16 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
All Vertical InfraPower PDUs come with both button (VMS) and bracket (VMB) mounting hardware.
]]>The InfraPower V16US-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V18L13/18X19-20A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 74" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 18 x C13 18 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V18L13/18X19-20A-M/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>V18L13/18X19-30A-M/CR_L630/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 74" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 18 x C13 18 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V18L13/18X19-30A-M/CR_L630/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>V18L13/6X19-20A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.1" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 18 x C13 6 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V18L13/6X19-20A-M/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>V18L13/6X19-30A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.1" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 18 x C13 6 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V18L13/6X19-30A-M/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>V20C13-20A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-20A-MD is: V16C13-20A-MD/CR_L620/3B-1
]]>The InfraPower V20C13-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V20C13-20A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13-20A-W is: V20C13-20A-W/CR_L620/3B-1
]]>The InfraPower V20C13-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13-20A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13-20A-WS is: V20C13-20A-WS/CR_L620/3B-1
]]>
The InfraPower V20C13-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13-20A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13-20A-WSi is: V20C13-20A-WSi/CR_L620/3B-1
]]>The InfraPower V20C13-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V20C13-30A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V16C13-30A-MD is: V16C13-30A-MD/CR_L620/3B-1
]]>The InfraPower V20C13-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V20C13-30A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13-30A-W is: V20C13-30A-W/CR_L630/3B-1
]]>The InfraPower V20C13-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13-30A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13-30A-WS is: V20C13-30A-WS/CR_L630/3B-1
]]>
The InfraPower V20C13-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13-30A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13-30A-WSi is: V20C13-30A-WSi/CR_L630/3B-1
]]>The InfraPower V20C13-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V20C13/4C19-20A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-20A-MD is: V20C13/4C19-20A-MD/CR_L620/3B-1
]]>The InfraPower V20C13/4C19-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V20C13/4C19-20A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-20A-W is: V20C13/4C19-20A-W/CR_L620/3B-1
]]>The InfraPower V20C13/4C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13/4C19-20A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-20A-WS is: V20C13/4C19-20A-WS/CR_L620/3B-1
Similar ServerTech PDU model: STV-4541B
]]>The InfraPower V20C13/4C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13/4C19-20A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-20A-WSi is: V20C13/4C19-20A-WSi/CR_L620/3B-1
]]>The InfraPower V20C13/4C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V20C13/4C19-30A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-30A-MD is: V20C13/4C19-30A-MD/CR_L620/3B-1
]]>The InfraPower V20C13/4C19-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V20C13/4C19-30A-W Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-30A-W is: V20C13/4C19-30A-W/CR_L630/3B-1
]]>The InfraPower V20C13/4C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13/4C19-30A-WS Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-30A-WS is: V20C13/4C19-30A-WS/CR_L630/3B-1
Similar ServerTech PDU model: STV-4541C
]]>The InfraPower V20C13/4C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20C13/4C19-30A-WSi Specifications:
Mechanical | |
Length | 53.15" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V20C13/4C19-30A-WSi is: V20C13/4C19-30A-WSi/CR_L630/3B-1
Similar ServerTech PDU model: STV-6541C
]]>The InfraPower V20C13/4C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V20US-20A-MD Specifications:
Mechanical | |
Width | 2.13" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V20US-20A-MD 0U Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V20US-20A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 53.15" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V20US-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20US-20A-WS Specifications:
Mechanical | |
Width | 2.13" |
Height | 53.15" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower V20US-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20US-20A-WSi Specifications:
Mechanical | |
Width | 2.13" |
Depth | 3.15" |
Height | 53.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
All Vertical InfraPower PDUs come with both button (VMS) and bracket (VMB) mounting hardware.
]]>The InfraPower V20US-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V20US-30A-MD Specifications:
Mechanical | |
Width | 2.13" |
Height | 43.31" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V20US-30A-MD Metered 0U Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V20US-30A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 53.15" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V20US-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20US-30A-WS Specifications:
Mechanical | |
Width | 2.13" |
Height | 53.15" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower V20US-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V20US-30A-WSi Specifications:
Mechanical | |
Width | 2.13" |
Depth | 3.15" |
Height | 53.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 20 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
All Vertical InfraPower PDUs come with both button (VMS) and bracket (VMB) mounting hardware.
]]>The InfraPower V20US-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V24C13-20A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 51.19" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-20A-MD is: V24C13-20A-MD/CR_L620/3B-1
]]>The InfraPower V24C13-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V24C13-20A-W Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-20A-W is: V24C13-20A-W/CR_L620/3B-1
]]>The InfraPower V24C13-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13-20A-WS Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-20A-WS is: V24C13-20A-WS/CR_L620/3B-1
Similar ServerTech PDU model: STV-4540A
]]>The InfraPower V24C13-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13-20A-WSi Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-20A-WSi is: V24C13-20A-WSi/CR_L620/3B-1
]]>The InfraPower V24C13-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V24C13-30A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 51.19" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-30A-MD is: V24C13-30A-MD/CR_L620/3B-1
]]>The InfraPower V24C13-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V24C13-30A-W Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-30A-W is: V24C13-30A-W/CR_L630/3B-1
]]>The InfraPower V24C13-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13-30A-WS Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-30A-WS is: V24C13-30A-WS/CR_L630/3B-1
Similar ServerTech PDU model: STV-4540C
]]>The InfraPower V24C13-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13-30A-WSi Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13-30A-WSi is: V24C13-30A-WSi/CR_L630/3B-1
]]>The InfraPower V24C13-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V24C13/4C19-20A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 51.19" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-20A-MD is: V24C13/4C19-20A-MD/CR_L620/3B-1
]]>The InfraPower V24C13/4C19-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V24C13/4C19-20A-W Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-20A-W is: V24C13/4C19-20A-W/CR_L620/3B-1
]]>The InfraPower V24C13/4C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13/4C19-20A-WS Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-20A-WS is: V24C13/4C19-20A-WS/CR_L620/3B-1
]]>
The InfraPower V24C13/4C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13/4C19-20A-WSi Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-20A-WSi is: V24C13/4C19-20A-WSi/CR_L620/3B-1
]]>The InfraPower V24C13/4C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V24C13/4C19-30A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 51.19" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-30A-MD is: V24C13/4C19-30A-MD/CR_L620/3B-1
]]>The InfraPower V24C13/4C19-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V24C13/4C19-30A-W Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-30A-W is: V24C13/4C19-30A-W/CR_L630/3B-1
]]>The InfraPower V24C13/4C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13/4C19-30A-WS Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-30A-WS is: V24C13/4C19-30A-WS/CR_L630/3B-1
]]>
The InfraPower V24C13/4C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24C13/4C19-30A-WSi Specifications:
Mechanical | |
Length | 64.97" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x 10A Rated IEC320 C13 4 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V24C13/4C19-30A-WSi is: V24C13/4C19-30A-WSi/CR_L630/3B-1
]]>The InfraPower V24C13/4C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V24L13-20A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.2" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 24 x C13 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V24L13-20A-M/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>V24L13-30A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.2" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 24 x C13 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V24L13-30A-M/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>V24US-20A-MD Specifications:
Mechanical | |
Width | 2.13" |
Height | 55.12" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V24US-20A-MD 0U Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V24US-20A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 64.96" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V24US-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24US-20A-WS Specifications:
Mechanical | |
Width | 2.13" |
Height | 64.97" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
Similar ServerTech PDU model: C1W24VS-1AFA25A5
]]>The InfraPower V24US-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24US-20A-WSi Specifications:
Mechanical | |
Width | 2.13" |
Depth | 3.15" |
Height | 64.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 24 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
All Vertical InfraPower PDUs come with both button (VMS) and bracket (VMB) mounting hardware.
]]>The InfraPower V24US-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V24US-30A-MD Specifications:
Mechanical | |
Width | 2.13" |
Height | 55.12" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V24US-30A-MD Metered 0U Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V24US-30A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 64.96" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The InfraPower V24US-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24US-30A-WS Specifications:
Mechanical | |
Width | 2.13" |
Height | 64.97" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
Similar ServerTech PDU model: C1W24VS-1DFA25A5
]]>The InfraPower V24US-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V24US-30A-WSi Specifications:
Mechanical | |
Width | 2.13" |
Depth | 3.15" |
Height | 64.97" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 110V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 24 x NEMA 5-20R |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
All Vertical InfraPower PDUs come with both button (VMS) and bracket (VMB) mounting hardware.
]]>The InfraPower V24US-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V24X19-20A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.1" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 24 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V24X19-20A-M 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking combo C13/C19 Outlets.
]]>V24X19-20A-MD/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 47.2" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (MD Monitored PDU) | |
Local Display | 3-digit LED ammeter measuring input load current |
Bank Measurement | Current (A) |
Accuracy | +/- (3% of the reading + 5 digits) RMS |
Outlets | 24 x C13/C19 Combo Outlets |
Standards | |
Agency Approvals | EMC, UL, RoHS3, & REACH |
]]>
The InfraPower V24X19-20A-MD/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes Amp monitoring with a local meter. Now with the innovative slide-locking outlets.
]]>V24X19-30A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.1" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 24 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V24X19-30A-M 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking combo C13/C19 Outlets.
]]>V30X19-20A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 69.9" |
Depth | 2.1" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 30 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V30X19-20A-M 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring
]]>V30X19-20A-MD/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.1" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (MD Monitored PDU) | |
Local Display | 3-digit LED ammeter measuring input load current |
Bank Measurement | Current (A) |
Accuracy | +/- (3% of the reading + 5 digits) RMS |
Outlets | 30 x C13/C19 Combo Outlets |
Standards | |
Agency Approvals | EMC, UL, RoHS3, & REACH |
]]>
The InfraPower V30X19-20A-MD/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes Amp monitoring with a local meter. Now with the innovative slide-locking outlets.
]]>V30X19-30A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 66.9" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 30 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V30X19-30A-M 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking combo C13/C19 Outlets.
]]>V30X19-30A-MD/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 57.1" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V Single-Phase |
Meter Features (MD Monitored PDU) | |
Local Display | 3-digit LED ammeter measuring input load current |
Bank Measurement | Current (A) |
Accuracy | +/- (3% of the reading + 5 digits) RMS |
Outlets | 30 x C13/C19 Combo Outlets |
Standards | |
Agency Approvals | EMC, UL, RoHS3, & REACH |
]]>
The InfraPower V30X19-30A-MD/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes Amp monitoring with a local meter. Now with the innovative slide-locking outlets.
]]>V36C13/6C19-20A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 64.96" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-20A-MD is: V36C13/6C19-20A-MD/CR_L620/3B-1
]]>The InfraPower V36C13/6C19-20A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V36C13/6C19-20A-W Specifications:
Mechanical | |
Length | 67.92" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-20A-W is: V36C13/6C19-20A-W/CR_L620/3B-1
]]>The InfraPower V36C13/6C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V36C13/6C19-20A-WS Specifications:
Mechanical | |
Length | 64.97" |
Width | 3.35" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-20A-WS is: V36C13/6C19-20A-WS/CR_L620/3B-1
]]>
The InfraPower V36C13/6C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V36C13/6C19-20A-WSi Specifications:
Mechanical | |
Length | 64.97" |
Width | 3.35" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-20A-WSi is: V36C13/6C19-20A-WSi/CR_L620/3B-1
]]>The InfraPower V36C13/6C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V36C13/6C19-30A-MD Specifications:
Mechanical | |
Width | 2.3" |
Height | 64.96" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Local Display | |
Meter Features | 3-digit LED ammeter measuring input load current |
Measurement | Current ( A ) |
Accuracy | ± ( 3% of the reading + 5 digits ) RMS |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-30A-MD is: V36C13/6C19-30A-MD/CR_L630/3B-1
]]>The InfraPower V36C13/6C19-30A-MD Metered Rack PDU allows true RMS current local monitoring via a digital RMS ammeter. The blue LED display is easy-to-read from a distance and allows rapid access to the aggregate load on the circuit. It easily prevents circuit overloads during equipment installation and allows users to plan the capacity based on actual real time current monitoring.
]]>For more information see:
V36C13/6C19-30A-W Specifications:
Mechanical | |
Length | 67.92" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-30A-W is: V36C13/6C19-30A-W/CR_L630/3B-1
]]>The InfraPower V36C13/6C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V36C13/6C19-30A-WS Specifications:
Mechanical | |
Length | 64.97" |
Width | 3.35" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-30A-WS is: V36C13/6C19-30A-WS/CR_L630/3B-1
]]>
The InfraPower V36C13/6C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 1.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
V36C13/6C19-30A-WSi Specifications:
Mechanical | |
Length | 64.97" |
Width | 3.35" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 1.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V |
Rated Amperage (de-rated) | 30 amp (2 x 12 amp output) |
Outlets | 36 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The full part number for this version of the V36C13/6C19-30A-WSi is: V36C13/6C19-30A-WSi/CR_L630/3B-1
]]>The InfraPower V36C13/6C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>V36L13/6X19-20A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 74" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 36 x C13 6 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V36L13/6X19-20A-M/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>V36L13/6X19-30A-M/CR_L620/3B-1 Specifications:
Mechanical | |
Width | 2.2" |
Height | 74" |
Depth | 2.2" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V Single-Phase |
Meter Features (M4 Monitored PDU) | |
Local Display | Field replaceable 2.8" color LCD with touchscreen |
Bank Measurement | Current (A), Energy (kWh), Voltage (V) & Power factor |
Accuracy | +/- 1% Billing-grade |
IP Connection | via IP Meter PDU or IP dongle |
Cascade | Up to 32 PDU under single IP address |
USB-C Function Port x 1 | Support Wi-Fi, Firmware update, Backup power for meter |
Sensor Port x 4 | Temp. Sensor / Temp. + Humid. Sensor / Door Sensor (support daisy chain sensors up to 4) |
Outlets | 36 x C13 6 x Combo C13/C19 |
Standards | |
Agency Approvals | CE/EMC, CE/LVD & UKCA, RoHS3 & REACH |
]]>
The InfraPower V36L13/6X19-30A-M/CR_L620/3B-1 0U Monitored Rack PDU is single-phase PDU designed for cost efficient, reliable power distribution for your rack. Includes strip power, circuit power, and circuit breaker monitoring. Now with the innovative slide-locking outlets.
]]>VP12C13/12C19-20A Specifications:
Mechanical | |
Width | 2.13" |
Height | 59.06" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 4 x C13 + 4 x C19 |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP12C13/12C19-20A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 66.93" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max.4 x C13 + 4 x C19 |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP12C13/12C19-20A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 4 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP12C13/12C19-20A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 4 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>VP12C13/12C19-30A Specifications:
Mechanical | |
Width | 2.13" |
Height | 59.06" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.6A max. 4 x C13 + 4 x C19 |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP12C13/12C19-30A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 66.93" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max.4 x C13 + 4 x C19 |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP12C13/12C19-30A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 4 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP12C13/12C19-30A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 4 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP12C13/12C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>For more information see:
VP12C13/12C19-60A-W Specifications:
Mechanical | |
Width | 3.35" |
Height | 55.12" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 2 x C13 + 2 x C19 |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP12C13/12C19-60A-W is: VP12C13/12C19-60A-W/CR_EN/2B-1
]]>The InfraPower VP12C13/12C19-60A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP12C13/12C19-60A-WS Specifications:
Mechanical | |
Length | 55.12" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 2 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP12C13/12C19-60A-WS is: VP12C13/12C19-60A-WS/CR_EN/2B-1
]]>The InfraPower VP12C13/12C19-60A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP12C13/12C19-60A-WSi Specifications:
Mechanical | |
Length | 55.12" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 12 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 2 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP12C13/12C19-60A-WSi is: VP12C13/12C19-60A-WSi/CR_EN/2B-1
]]>The InfraPower VP12C13/12C19-60A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>VP18C13/12C19-20A Specifications:
Mechanical | |
Width | 3.07" |
Height | 61.03" |
Depth | 2.37" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 6 x C13 + 4 x C19 |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP18C13/12C19-20A-W Specifications:
Mechanical | |
Width | 3.08" |
Height | 61.03" |
Depth | 2.37" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max.6 x C13 + 4 x C19 |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/12C19-20A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 3.35" |
Depth | 3.54" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 6 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/12C19-20A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 6 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>VP18C13/12C19-30A Specifications:
Mechanical | |
Width | 3.07" |
Height | 61.03" |
Depth | 2.37" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max. 6 x C13 + 4 x C19 |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP18C13/12C19-30A-W Specifications:
Mechanical | |
Width | 3.08" |
Height | 61.03" |
Depth | 2.37" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max.6 x C13 + 4 x C19 |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/12C19-30A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 3.35" |
Depth | 3.54" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 6 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/12C19-30A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 6 x C13 + 4 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/12C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>For more information see:
VP18C13/12C19-60A-W Specifications:
Mechanical | |
Width | 3.35" |
Height | 58.07" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 3 x C13 + 2 x C19 |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP18C13/12C19-60A-W is: VP18C13/12C19-60A-W/CR_EN/2B-1
]]>The InfraPower VP18C13/12C19-60A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/12C19-60A-WS Specifications:
Mechanical | |
Length | 69.89" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 3 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP18C13/12C19-60A-WS is: VP18C13/12C19-60A-WS/CR_EN/2B-1
]]>The InfraPower VP18C13/12C19-60A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/12C19-60A-WSi Specifications:
Mechanical | |
Length | 69.82" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 12 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 3 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP18C13/12C19-60A-WSi is: VP18C13/12C19-60A-WSi/CR_EN/2B-1
]]>The InfraPower VP18C13/12C19-60A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>VP18C13/6C19-20A Specifications:
Mechanical | |
Width | 2.13" |
Height | 59.06" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 6 x C13 + 2 x C19 |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP18C13/6C19-20A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 66.93" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max.6 x C13 + 2 x C19 |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/6C19-20A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 6 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/6C19-20A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 6 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>VP18C13/6C19-30A Specifications:
Mechanical | |
Width | 2.13" |
Height | 59.06" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max. 6 x C13 + 2 x C19 |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP18C13/6C19-30A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 66.93" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max.6 x C13 + 2 x C19 |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/6C19-30A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 6 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/6C19-30A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 6 x C13 + 2 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP18C13/6C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>For more information see:
VP18C13/6C19-60A-W Specifications:
Mechanical | |
Width | 3.35" |
Height | 55.12" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 3 x C13 + 1 x C19 |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP18C13/6C19-60A-W is: VP18C13/6C19-60A-W/CR_EN/2B-1
]]>The InfraPower VP18C13/6C19-60A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/16C19-60A-WS Specifications:
Mechanical | |
Length | 55.12" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 3 x C13 + 1 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP18C13/6C19-60A-WS is: VP18C13/6C19-60A-WS/CR_EN/2B-1
]]>The InfraPower VP18C13/6C19-60A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP18C13/6C19-60A-WSi Specifications:
Mechanical | |
Length | 55.12" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 18 x 10A Rated IEC320 C13 6 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 3 x C13 + 1 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP18C13/6C19-60A-WSi is: VP18C13/6C19-60A-WSi/CR_EN/2B-1
]]>The InfraPower VP18C13/6C19-60A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>VP21C13/3C19-20A Specifications:
Mechanical | |
Width | 2.13" |
Height | 59.06" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 20 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max. 7 x C13 + 1 x C19 |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-20A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP21C13/3C19-20A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 66.93" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 11.6A max.7 x C13 + 1 x C19 |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-20A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP21C13/3C19-20A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 7 x C13 + 1 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-20A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP21C13/3C19-20A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 20 amp (16 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 11.6A max. 7 x C13 + 1 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-20A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>VP21C13/3C19-30A Specifications:
Mechanical | |
Width | 2.13" |
Height | 59.06" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Rated Amperage | 30 amp |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max. 7 x C13 + 1 x C19 |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-30A 0U Basic Rack PDU is a no-frills 3-phase PDU designed for cost efficient, reliable power distribution for your rack.
]]>For more information see:
VP21C13/3C19-30A-W Specifications:
Mechanical | |
Width | 2.13" |
Height | 66.93" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | Output 17.3A max.7 x C13 + 1 x C19 |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-30A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP21C13/3C19-30A-WS Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 7 x C13 + 1 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-30A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP21C13/3C19-30A-WSi Specifications:
Mechanical | |
Length | 66.93" |
Width | 2.13" |
Depth | 3.15" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 30 amp (24 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Phase Details (per phase) | Output 17.3A max. 7 x C13 + 1 x C19 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
]]>
The InfraPower VP21C13/3C19-30A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>For more information see:
VP21C13/3C19-60A-W Specifications:
Mechanical | |
Width | 3.35" |
Height | 55.12" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Input Voltage | 208V 3-Phase |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 1st Bank: 3 x C13 + 1 x C19 2nd Bank: 4 x C13 |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Standards | |
Agency Approvals | FCC & CE certified, CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP21C13/3C19-60A-W is: VP21C13/3C19-60A-W/CR_EN/2B-1
]]>The InfraPower VP21C13/3C19-60A-W Monitored Rack PDU includes the hot-swapable W meter which not only allows local metering of current (AMP), voltage (Volt), power (KW), energy consumption (KWh) and power factor of the entire PDU, but also provides connection ports to daisy chain up to 16 PDUs, as well as 2 ports to support external temp/humidity sensors (sold separately). Include the optional IP dongle to allow remote monitoring of all daisy chained PDUs from a single IP address using the free downloadable IPM-04 PDU Management Software, the simple Web-based GUI integrated into each PDU, or 3rd Party DCIM via SNMP.
Please note: IP dongle required for remote monitoring.
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP21C13/3C19-60A-WS Specifications:
Mechanical | |
Length | 55.12" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 1st Bank: 3 x C13 + 1 x C19 2nd Bank: 4 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP21C13/3C19-60A-WS is: VP21C13/3C19-60A-WS/CR_EN/2B-1
]]>The InfraPower VP21C13/3C19-60A-WS switched Rack PDU is the essential PDU for mission critical applications. With the ability to switch individual outlets on and off, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely (requires 1 IP dongle per 32 PDUs, sold separately).
]]>The 2.8" color LCD provides a sharp and highly visible display of kWh, kW, Power Factor, Volt, Amp, Temperature and Humidity with a metering accuracy to within +/- 1%. Local setup can be made by using a membrane switch indicating 'up', 'down', 'enter' and 'back' options. The IP dongle allows management, monitoring and switching of the PDU from anywhere in the world, reducing manpower and travel costs by negating the need for staff to be in physical contact with the equipment.
For more information see:
VP21C13/3C19-60A-WSi Specifications:
Mechanical | |
Length | 55.12" |
Width | 3.35" |
Depth | 3.55" |
Environmental | |
Operating Temp | -5 to 60 ℃ (23 to 140 ℉) |
Storage Temp | -25 to 65 ℃ (-25 to 149 ℉) |
Humidity | 8 to 95% RH, non-condensing |
Meter Features | |
Local Display | Field replaceable 2.8" color LCD |
Bank Measurement | Voltage (V), Current (A), energy (kWh) & power factor |
Outlet Measurement | Current (A), Energy (kWh) |
Accuracy | ±1% true RMS |
IP Access | via IP dongle, one IP to access up to 16 PDUs |
Cascade | Up to 16 PDUs under a single IP address via optional IP dongle |
SNMP | via IP dongle |
Sensor Port x 2 | Optional Temp. Sensor or Temp. + Humid. Sensor |
Outlet Control | On/off switching, Scheduling via free IMP-04 software |
Input Voltage | 208V 3-Phase |
Rated Amperage (de-rated) | 60 amp (51 amp output) |
Outlets | 21 x 10A Rated IEC320 C13 3 x 16A Rated IEC320 C19 |
Phase Details (per phase) | 2 Banks Per Phase Output Per Bank =17.3A max. 1st Bank: 3 x C13 + 1 x C19 2nd Bank: 4 x C13 |
Standards | |
Agency Approvals | FCC & CE certified, cUL / CE / LVD certified, RoHS2 & REACH |
The Full part number for this version of the VP21C13/3C19-60A-WSi is: VP21C13/3C19-60A-WSi/CR_EN/2B-1
]]>The InfraPower VP21C13/3C19-60A-WSi intelligent rack PDU is packed full of features including outlet-level metering and outlet-level switching and designed for data center professionals who demand top level performance. With the ability to switch individual outlets off and on, IT professionals can greatly reduce downtime by rebooting unresponsive equipment remotely, while outlet-level metering is great for capacity planning and energy efficiency initiatives.
Please Note: requires 1 IP dongle per 32 PDUs, sold separately
]]>